universal machine milling used for sale

a well-preserved CNC portal milling machine Dörries Scharmann] type FZ 25, built in 1994, table 6000 x 2500 mm, travel distances X/Y/Z 6000/2500/2000 mm, portal passage 3000 mm, table load approx. 40 tons, with automatic milling head change. CNC control Heidenhain TNC426, dimensions approx. 18 x 8 x 7 m, weight approx. 174 to.

clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, step blocks -Step block: Universal clamping pad set in wooden box -Width: 30 mm -Design/Dimensions: see photos -Dimensions box: 445/275/H75 mm -Total weight: 15 kg

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 480/70 -Elbe Art.No.: 0.107. see photo -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Dimensions: Ø 75 x 480 mm -Weight: 3.4 kg

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 380/70 -Elbe Art.No.: 0.107.110.0001 -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Dimensions: Ø 75 x 380 mm -Weight: 3.2 kg

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 320/60 -Elbe Art.No.: 0.106.110.0001 -Flange Ø 65 mm -Bolt circle: Ø 52 x 6 mm -Dimensions: Ø 65 x 320 mm -Weight: 2 kg

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm table surface area: 1250 x 700 mm NC-rotary table: integriert, 700 mmø spindle taper: SK 40 spindle taper: DIN 69871 spindle turning speed - stepless: 20 - 12.000 U/min control: HEIDENHAIN control: TNC 430 feeds x/y/z -stepless: 20 - 15.000 mm/min rapid traverse: 30 m/min ATC: 32 (2 x 16) Pos tool diameter: 80 / 130 mm workpiece length: 315 mm weight of tools max.: 8 kg NC-rotary table - speed -: max. 15 U/min table load: 600 / 500 kg total power requirement: 60 kW weight of the machine ca.: 9,6 t = 5-axis machining center, table clamping surface 1250 x 700 mm with integrated NC-rotary table (=4th axis), movement of milling head via control (=5th axis) Accessories: electron. handwheel, chip conveyor (snailconveyor), coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

COLCHESTER MASTIFF V/S 1800 universal lathe was built in Great Britain in 1998. The machine allows machining a workpiece with a maximum length of 2000 mm and a diameter of 560 mm (above the bed) or 370 mm (above the support). The 11 kW spindle of the lathe with reading rotates at 1800 rpm. The lathe is equipped with a MITSUBISHI Freqrol A200 inverter and a SONY LH52 digital display. Total weight of the machine is 3250 kg. Technical data of the lathe COLCHESTER MASTIFF V/S 1800 - turning length: 2000 mm - turning diameter above the bed: 560 mm - turning diameter over support: 370 mm - inverter: MITSUBISHI Freqrol A200 - digital display: SONY LH52 - spindle speed: 1800 rpm - spindle bore diameter: 90 mm - spindle power: 11 kW - MASTIFF VS 1800 machine dimensions: (L x W x H): 3750 x 1700 x 2100 mm - total weight: 3250 kg

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Cardan shaft: with universal joint -Type: Length 250 mm -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Quantity: 2x cardan shafts available -Price: per piece -Dimensions: Ø 75 x 250 mm -Weight: 2.3 kg/pc.

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Cardan shaft: with universal joint -Type: Length 240 mm -Flange: Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Dimensions: 240/75/H75 mm -Weight: 2.2 kg

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Cardan shaft: with universal joint -Type: Length 290 mm -Flange: Ø 100 mm -Bolt circle: Ø 83 x 9 mm -Dimensions: 290/100/H100 mm -Weight: 6.1 kg

Including various accessories Auction-ID: A1-45188-31

Turning diameter above carriage 180mm. Auction-ID: A1-45188-69

In stock on pallet Auction-ID: A1-45790-567

This 4-axis AXA USC-2-M was manufactured in 1994. It features a 4th axis with tailstock and a tool magazine with 22 tool positions, enhancing its versatility. Ideal for complex machining tasks, this universal machining centre represents a significant asset for precision work. Contact us for more information about this machine.

This 5-axis DMG MORI DMU 75 Monoblock was manufactured in 2015. It features an impressive X-axis travel of 750 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine is equipped with a maximum spindle speed of 18,000 rpm and offers 60 tool positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 75 Monoblock universal machining centre we have for sale. Contact us for further details.

This 5-axis HERMLE C 600 U was manufactured in 2000. It features an X-axis travel of 450 mm, Y-axis travel of 300 mm, and Z-axis travel of 400 mm, providing versatile machining capabilities. The machine is equipped with a HSK 63 tool holder and a Heidenhain iTNC 426 CNC control for precision operations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 600 U universal machining centre we have for sale. Contact us for further details.

This 5-axis DECKEL MAHO DMC 60U was manufactured in 2004. It features a spindle speed of 12,000 rpm and a tool magazine with 60 positions, enhancing its versatility for various machining tasks. The Y-axis was replaced in 2023, ensuring improved performance. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 60U universal machining centre we have for sale. Contact us for further details.

This 5-axis DECKEL MAHO DMF 260/11 was manufactured in 2014. It features an impressive X-axis travel of 2600 mm, Y-axis travel of 1100 mm, and Z-axis travel of 900 mm. The machine is equipped with a vertical motor spindle with a spindle speed range of 20 – 8000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMF 260/11 universal machining centre. Contact us for further details.

-Model UW-105-0 -Serial number: 86.131.711 -380 volts -13.7 kW Dimensions: 64x72x190cm (WxDxH)

Lid Maho DMC-200 U serie 1512 5-axis CNC universal machining center, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameter x height: 1950x1100 mm Travel X-axis: 1800 mm Travel Y-axis: 2000 mm Travel Z-axis: 1100 mm C-axis table rotation: 360° B-axis travel: -7/187° Spindle speed: 18000 1/min Spindle cone: HSK-A63 Spindle motor: 28/19 kW Magazine capacity: 120 Required footprint: 11200x12300 mm Height: 4375 mm Weight: 58000 kg For any questions about the machine, as well as a scheduling for the inspection, we ask you to contact us by phone or e-mail.

This 5-axis HERMLE C40U Dynamic universal machining centre was manufactured in 2011. It features a travel of 850 mm in the X-axis, 700 mm in the Y-axis, and 500 mm in the Z-axis. The machine has a maximum spindle speed of 10,000 rpm and a magazine capacity of 38 positions plus 43 additional. If you are looking to get high-quality machining capabilities, consider the HERMLE C40U Dynamic machine we have for sale. Contact us for further details.

This 5-axis DMG DMC80U DuoBlock was manufactured in 2011. It features a maximum workpiece diameter of 800 mm and a height of 600 mm, with a load capacity of 800 kg per pallet. The machine is equipped with a dual pallet system and a rapid traverse rate of 60 m/min. If you are looking to get high-quality machining capabilities, consider the DMG DMC80U DuoBlock universal machining centre we have for sale. Contact us for further details.

Auction-ID: A1-45793-95

Schunk Universal Gripper PGN-plus 380-1 AS Stroke per jaw [mm]: 45.0 Clamping force [N]: 12350.0 Clamping force (at finger length 0 mm) [N]: 12990.0 Min. spring force [N]: 3300.0 Net mass [kg]: 36.5 Recommended workpiece weight [kg]: 47.0 Cylinder volume per double stroke [cm³]: 2705.0 Min. operating pressure [bar]: 4.0 max. operating pressure [bar]: 6.5 Nominal operating pressure [bar]: 6.0 Min. sealing air pressure [bar]: 0.5 Max. sealing air pressure [bar]: 1.0 Closing time [s]: 0.5 Opening hours [s]: 0,8 Closing/opening time with spring [s]: 0.8 max. permissible finger length [mm]: 350.0 Max. permissible mass per finger [kg]: 17.0 Protection class IP: 40 Min. ambient temperature [°C]: 5.0 Max. ambient temperature [°C]: 90.0 Repeatability [mm]: 0.05 Length X [mm]: 410.0 Width Y [mm]: 170.0 Height Z [mm]: 226.5 Moment Mx max. [Nm]: 560.0 Moment My Max. [N ...

Schunk Universal Gripper PGF 100 AS (340381) Stroke per jaw23.5 Clamping force 1150N Clamping force (at finger length 0 mm) 1144N Min. spring force 270N Net weight: 2.85kg Recommended workpiece weight 4.4kg Cylinder volume per double stroke 154 cm³ Min. operating pressure 4 bar Max. operating pressure 6.5 bar Nominal operating pressure 6 bar Closing time: 0.16s Opening time 0.25s Closing/opening time with spring 0.7s Max. permissible finger length 100mm Max. permissible mass per finger 1.4kg Protection class IP 40 Min. ambient temperature 5°C Max. ambient temperature 90°C Repeatability: 0.03mm Length X 148.5mm Width Y 64mm Height Z 121mm Moment Mx max. 40Nm Moment My max. 100Nm Moment Mz max. 100Nm Max. force axial Fz max. 1600N

Schunk Universal Gripper PGNplus P 200/1-AS (318618) Size: 200, pneumatic with gripping force retention: AS • Hub per jaw: 25 mm • Clamping force: 5050 N • Max. ambient temperature: 90 °C Stroke per jaw [mm] 25.0 Clamping force [N] 5050.0 Clamping force (at finger length 0 mm) [N] 5200.0 Min. spring force [N] 1250.0 Net mass [kg] 6.8 Recommended workpiece weight [kg] 19.0 Cylinder volume per double stroke [cm³] 810.0 Min. operating pressure [bar] 4.0 max. operating pressure [bar] 6.5 Nominal operating pressure [bar] 6.0 Min. sealing air pressure [bar] 0.5 Max. sealing air pressure [bar] 1.0 Closing time [s] 0.24 Opening time [s] 0.55 Closing/opening time with spring [s] 0.4 max. permissible finger length [mm] 265.0 Max. permissible mass per finger [kg] 6.5 Protection class IP 40 Min. ambient temperature [°C] 5.0 Max. ambient temperature [°C] 90.0  ...

Schunk Universal Gripper PGNplus 200/2 AS (371455) Size: 200, pneumatic, with gripping force retention: AS • Stroke per jaw: 14 mm • Clamping force: 6250 N • Max. ambient temperature: 90 °C Stroke per jaw [mm] 14.0 Clamping force [N] 6250.0 Clamping force (at finger length 0 mm) [N] 7072.0 Min. spring force [N] 1600.0 Net mass [kg] 7.5 Recommended workpiece weight [kg] 23.5 Cylinder volume per double stroke [cm³] 495.0 Min. operating pressure [bar] 4.0 Max. Operating Pressure [bar]6.5 Nominal operating pressure [bar] 6.0 Min. sealing air pressure [bar] 0.5 Max. sealing air pressure [bar] 1.0 Closing time [s] 0.3 Opening hours [s]    0.6 Closing/opening time with spring [s] 0.5 Max. permissible finger length [mm] 200.0 Max. permissible mass per finger [kg] 6.5 Protection class IP 40 Min. ambient temperature [°C] 5.0 Max. ambient temperature ...

Schunk Universal Gripper PGNplus 300-1 AS Stroke per jaw [mm]: 35.0 Clamping force [N]: 7400.0 Clamping force (at finger length 0 mm) [N]: 7710.0 Min. spring force [N]: 1400.0 Net mass [kg]: 17.2 Recommended workpiece weight [kg]: 30.0 Cylinder volume per double stroke [cm³]: 1295.0 Min. Operating Pressure [bar]: 4.0 Max. Operating Pressure [bar]: 6.5 Nominal operating pressure [bar]: 6.0 Min. sealing air pressure [bar]: 0.5 Max. sealing air pressure [bar]: 1.0 Closing time [s]: 0.4 Opening hours [s]: 0.7 Closing/opening time with spring [s]: 0.6 Max. permissible finger length [mm]: 300.0 Max. permissible mass per finger [kg]: 11.5 Protection class IP: 40 Min. ambient temperature [°C]: 5.0 Max. Ambient Temperature [°C]: 90.0 Repeatability [mm]: 0.05 Length X [mm]: 320.0 Width Y [mm]: 140.0 Height Z [mm]: 172.0 Moment Mx max. [Nm]: 400.0 Momen ...

Auction-ID: A1-45737-149

x-travel:600 mm y-travel:770 mm z-travel:675 mm total power requirement:47 kW weight of the machine ca.:13 t Tool bore:HSK-A63 numbers of tools in magazin:40 including additional tool magazine ZM 182 1 spindle , 5 axes

x-travel:600 mm y-travel:700 mm z-travel:60 mm tool taper:SK40 magazine place:30 Stück table surface area:630 mm 5axis-CNC-Milling Machine Make: DMG Type: DMU 60 P YOM: 2004

CONVENTIONAL LATHE Inv. No. 13.114C1 Make STANKO Model 1M635 Center distance 3.000 mm Max. swing over bed Ø 700 mm Max. swing over cross slide Ø 380 mm Spindle bore Ø 76 mm R.P.M. 10-1250 (16x) kW 15 Volts 380 Cycles 50 Including: 3-jaw chuck

Inv. Num. : 6594 Type: VMX 42 SR Producer: Hurco Generated: 2008 Parameters: Control system: Winmax Work table length: 1270 mm Work table width: 610 mm Maximum table load (even): 500 kg Speed: 12000 1/min Travel X-axis: 1066 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Cone: SK40 Machine weight: 7550 kg Equipment: C-axis: CNC rotary table B-axis 2016: new spindle

Control: Siemens Travel X/Y/Z: 350 x 240 x 340 mm Spindle speed 6300 min-1 Tool holder SK 40 Manual swivel rotary table Tool holder Vice Accessories

x-travel: 700 mm y-travel: 400 mm z-travel: 330 mm Control: FANUC 31iB5 table-size: 850 x 410 mm : 21 fach turning speeds: 10.000 U/min Internal cooling system: 20 bar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mm y-travel: 450 mm z-travel: 35 mm Control: Heidenhein TNC 530 table weight: 200 Kg : Random 36 fach tool adaptor: HSK E40 turning speeds: 30.000 U/min total power requirement: kW weight of the machine ca.: 7500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONVENTIONAL LATHE Inv. No. 13.188C1 Make PINACHO Model S-90/180 Mach.no. 22417 Centre Distance 750 mm Max. Swing over Bed Ø 360 mm Max. Swing over Cross Slide Ø 205 mm Spindle Bore Ø 42 mm R.P.M. 30 – 2000 kW 2.2/3.4 Volts 400 Cycles 50 Including: 3-Jaw Chuck Ø 200 1 x Steady Rest Toopost Rapid Original type A Coolant attachment

Digital reading: Newall B60 DRO Turning length: 1000 mm Turning diameter: approx. 360 mm Voltage: 400V Power: 3.5 kW Frequency: 50 Hz 3-jaw chuck available Tailstock with chuck Coolant pump available Thread and feed tables available Emergency stop available Machine weight: approx. 1500 kg

Technical data Manufacturer: EMCO Model: EMCOMAT 20D Year of Make: 2008 Voltage: 400V/3~ Frequency: 50 / 60 Hz Rated current: 10.3 A Speed ranges: 40 – 3000 rpm Configuration Machine Type: Conventional lathe 3-jaw chuck: RÖHM Ø 200 mm Digital position display: X and Z axis Thread Table: Available Coolant device: available

PROMA SPF-1000PH universal lathe was manufactured in 2019 in the Czech Republic. The machine is designed for precision machining of internal and external cylindrical, conical and end faces, as well as grooving, bar turning, drilling and threading with adjustable thread stroke size. The optimum rotation speed scale and high-quality cast iron construction, allows the use of high-speed steel and carbide-tipped tools. Workpieces with a maximum length of 1000 mm are machined in a fully illuminated workspace using a powerful spindle with 12 speed stages ranging between 25 and 1800 rpm. Among the extensive equipment of the conventional lathe are a SINO SDS6-3V digital readout and a 3-jaw universal chuck. The total weight of the PROMA SPF 1000PH machine is 2635 kg. Technical specifications of the PROMA SPF-1000PH lathe - maximum turning length: 1000 mm - maximum turning diameter (above t ...

This 5-axis SCHÜCO AS 100 was manufactured in 2022. It features a machine bed length of 9,000 mm and allows for 6-sided processing with two 5-axis towers. The machine includes 5 movable clamping blocks with independent drives and a saw blade diameter of 450 mm. If you are looking to get high-quality profile machining capabilities, consider the SCHÜCO AS 100 universal machining centre we have for sale. Contact us for further details.

This 4-axis SCHÜCO PBX AL was manufactured in 2008. It features a processing length of 7,200 mm and is designed for the machining of aluminum profiles, including double-bar processing and through-feed capability for longer profiles. The machine includes an automatic tool changer and clamping blocks for enhanced efficiency. If you are looking to get high-quality machining capabilities, consider the SCHÜCO PBX AL universal machining centre we have for sale. Contact us for further details.

x-travel: 500 mm y-travel: 400 mm z-travel: 330 mm Control: FANUC 31i-B5 Tools changer: 14 pos. table-size: 850 x 410 mm number of spindle speeds: 24.000 U/min/rpm rapid traverse feeds: 48 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. -No.: 10286 Manufacturer: STARRAG HECKERT Year of construction: 2007 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Schweiz Machine-No.: 24139 X-Travel: 2800 mm Y-Travel: 2100 mm Z-Travel: 1900 mm Table Dimensions (Lengthxwidth): 2 x 1.250 x 1.600 mm Max. Tool Weight: 35 kg Workpiece Diameter At Full Load: 110 mm Tool Piece Magazine With: 60 Pcs./pcs. Tool dimensions (with occupied adjacent spaces): 125 mm Numbers Of Pallets: 2 Operating hours: 26180 H spindle running time: 26180h 43m 46s h/m/s automatic mode: 28559 H on time: 120 H pallet change time: 60 s Further information: internal coolant supply

Key data: 900 mm, 560 mm, 480 mm

Inv. Num. : 5373 Type: MCV 1000 POWER 5AX Producer: MAS Created: 2009 Parameters: Control system: HEIDENHAIN iTNC 530 Hours: 57709 h Spindle hours: 47727 h Table diameter: 520 mm Maximum table load (even): 400 kg Number of synchronized axes: 5 pieces Maximum vertical spindle speed: 8000 1/min Mechanical feed length axis X: 900 mm Mechanical feed length axis Y: 560 mm Mechanical feed length axis Z: 480 mm Cone: ISO 50 Number of tools: 40 pieces Tool diameter: 125 mm Max. tool weight: 15 kg Machine height: 3300 mm Machine length: 4600 mm Machine width: 3600 mm Machine weight: 13 t 2020: new spindle

Key data: 600 mm, 4450 mm, 450 mm

Control Heidenhain TNC 426 Travel X/Y/Z: 600/450/450 mm Spindle speed 10,000 min-1 Tool magazine for 30 Wkz., SK 40

Control ? Heidenhain Grinding lenght 1000 mm Gentre height 175 mm Dimension grinding wheel 400 mm Speed of grinding spindle 2000 rpm internal grinding attachment with rotation speed 20000 rpm, with grinding flange, measuring probe taster, machine has s

Control ? Heidenhain Grinding lenght 1000 mm Gentre height 175 mm Dimension grinding wheel 400 mm Speed of grinding spindle 2000 rpm internal grinding attachment with rotation speed 20000 rpm, with grinding flange, measuring probe taster, machine has s