universal internal grinding used for sale

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: 3 t dimensions of the machine ca.: m Overhauled and modernized machine -DRO in x and z-axis -New BEMA tailstock with 0,1mm cylinder compensation -Park position for the tailstock -New automatic switch off when diameter is reached -Automatic switching from rough to finish grinding -Finish grinding feed electrical infinitely variable from 0-100% -Modernized infeed handwheel like on the new machines -swiveling operator panel -Splash doors -coverd x-axis with possibility to set an exhauster on top -New internal grinding device like on the new model -new hydraulic aggregate -New electric cabinet -Scontrol voltage 24V instead of 220V Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrS ...

Key data: 299 mm, 620 mm, 150 mm

Technical data of the machine: - Workpiece headstock: MK5 - Tailstock: MK3 - Center height: 150 mm - Center width: 680 mm - Grinding length: 620 mm - Grinding wheel left: 350 x 50 x 127 - Grinding wheel right: 250 x 25 x 127 . Geometry: The machine is completely dismantled up to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the Z and X axes are scraped by hand and restored to a like-new condition. After completion, the machine receives a measurement report according to the manufacturer's specifications Equipment of the machine (standard): • 1 workpiece headstock MK5, swivel • 1 tailstock MK3 • 2 grinding wheel holders • 1 abrasive headstock Ø 127, swivel • 1 hydraulic power unit • 1 set of operating tools and instruction manual The machine and equipment shown in this il ...

grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Version R: Maschine hat Zentral ...

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung ...

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung ...

PROFIMAT MC610 It is an internal or external cylindrical grinding machine with an extremely compact traveling-column which offers everything that modern production solutions require. The technical features are as follows: - Grinding range: 600 x 1.000 mm - X-axis, column longitudinal travel: 1.000 mm - Y-axis, wheel head vertical travel: 550 mm - Z-axis, column cross travel: 520 mm - A-axis, indexer range (optional): +105 / -90 deg - C axis, indexer, range (optional): 360 deg - V-axis, stroke of head mounted dresser (opt.): 130 mm - Grinding spindle drive power, revolution: 60kW / 8.000rpm - Grinding wheel (d x w x bore), max.: 500 x 200 x 127 mm - Dimensions (width x depth x height): 2.380 x 4.100 x 3.000 mm - Weight (machine without electr. cabinet): 7.500 kgs - Workplace table sizes: 1.000 x 600 mm

VOUMARD CNC 300 S/N: 300030 Used - Excellent Year: 2007 DESCRIPTION: Machine type: BU 1000 T L7400 Was recently removed from power due to routine upgrades and was making good parts with full functionality. Siemens 840D CNC Control. Manuals included. Has grinding capability for: Internal diameters External diameters Front faces Back faces Internal tapers External tapers Profiles Drive spigots Face keyways Cams Bilobes and trilobes Internal threads External threads Bearing tracks Located at our warehouse in Preston, Idaho. We care about the machines we sell and want all of them to enjoy continued productive and profitable service for our remarkable customers. Included specifications are gathered from various sources such as firsthand inspection, owner or operator interviews, manuals, and OEM research. All machinery specifications, condition and detail ...

DECKEL S11, universal tool & cutter grinder, under power in our warehouse, Mimu machine-tools (Italy)

Universal cylindrical grinding machine for external and internal grinding with accessories Features: - Automatic grinding cycles - X/Z axes electrically controlled - Table can be swivelled up to 30° - Swivelling grinding head - Short changeover times from external to internal grinding - Easy to use - Compact design Hours: 12936 Weight: 2300Kg Technical data: see picture Further details on request

A Karstens cylindrical grinding machine from 1992, which was completely overhauled and modernized in 2014, is available. Center width: 1000mm, center height: 180mm, grinding diameter: 360mm, max. workpiece weight center/flying: 250kg/70kg, grinding wheel diameter: 400mm. Spindle holder: MK4, speed: 450rpm, swivel range: 90°, quill holder: MK4, quill stroke: 45mm, quill force: 600N. Table swivel: 10°, infeed spindle: 80mm, rapid traverse: 50mm, coarse adjustment: 280mm, weight: approx. 3800kg. Including 3x centering points and grinding wheels as good as new. Documentation available. On-site inspection is possible.

max. grinding diameter: 300 mm grinding length: 500 mm workpiece length: mm Number of axles: 6 St. centre height: 220 mm centre distance: 500 mm x-axis: 500 mm y-axis: 320 mm z-axis: 320 mm total power requirement: 5 kW weight of the machine ca.: t dimensions of the machine ca.: m Height of centres 200 mm Distance between centres / clamping length 750 / 500 mm Table size 290 x 1,600 mm Intermediate table 110 x 1,200 mm X / Y / Z axes 500 / 320 / 320 mm Feed speeds, X, Y & Z axes 0.005 - 5 m/min Grinding head swivelling, vertical axis (B axis) 300 ° Grinding head tilting (C axis) +/- 30 ° Speed range of R axis 0 - 50 rpm Grinding spindle speeds, approx. 5,000 - 10,000 rpm Workpiece holding fixture 50 ISO Indexing 1 - 999 ° Leads 0.5 - 10,000 mm Spindle drive 4 kW Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4,000 kg Accessories / Special Features SCHÜTTE CNC ...

max. grinding diameter: 320 mm grinding length: 500 mm workpiece length: 700 mm total power requirement: 10 kW weight of the machine ca.: 4 t dimensions of the machine ca.: m Height of centres 220 mm Distance between centres / clamping length 750 / 500 mm Table size 290 x 1,600 mm Intermediate table 110 x 1,200 mm X / Y / Z axes 500 / 320 / 320 mm Feed speeds, X, Y & Z axes 0.005 - 5 m/min Grinding head swivelling, vertical axis, manual 200 ° Grinding head tilting, manual +/- 90 ° Speed range of R axis, approx. 0 - 50 rpm Grinding spindle speeds, infinitely variable, approx. 2,000 - 12,000 rpm Workpiece holding fixture 50 ISO Indexing 1 - 999 ° Leads 0.5 - 10,000 mm Spindle drive 4 kW Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4,000 kg Accessories / Special Features SCHÜTTE CNC Continuous Path Control for 4 axes with SIEMENS/BOSCH components and SIEMENS  ...

Digital Grinding diameter 250 mm Grinding length 650 mm Accessories

Control Siemens Sinumerik 840D Max. workpiece diameter: 250 mm Max. workpiece length: 1500 mm Max. workpiece weight: 150 kg Internal grinding device Paper Belt Filter Centering tip Diamond dressing tile Grinding wheel change aid

Key data: 318 mm, 648 mm

JONES & SHIPMAN SUPREMA EASY 650 UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER (2010) Table: Swing:... 12.5" Distance Between Centers: 25.5" Table Travel 29.5" Max. Traverse Speed . 472" IPM HPG Increments .. 0.00005", 0.0005", or 0.005" Table Swivel 18 Deg. CCW, 16 Deg. CW Wheelhead: Total Infeed Travel:. 10.236"" Max. Speed .. 236" IPM Minimum Programmable Increment .. 0.00005" HPG Increments .. 0.00005", 0.0005", or 0.005" Swivel Range 190 Degrees CW 45 Deg. CCW External Grinding Wheels: Grinding Wheel Size, L.H. Standard:.. 14" x 2"W x 5"B R.H Standard: .. 12" x 1"W x 5"B Spindle Speeds (3):.. 1773, 2069 & 2400 RPM Motor Power: 5.5 H.P. Headstock: Swivel:.. 15 Degrees CW 90 Deg. CCW Speed, Infinitely Variable:.. 30 to 450 RPM Centers, Standard/Reduced ... #5 MT/#3 MT Approximate Weight: . 11,000 Lbs. Equipped With Internal grinding wheel attachm ...

Key data: 585 mm, 4064 mm

JARBE Universal Cylindrical Grinder Year: 1981 Technical Specifications & Features: • Swing Over Table: 23″ Distance between centers 160” • Hydraulic Table Traverse • Swiveling Table for Taper Grinding • Universal Workhead • Universal Wheelhead • Grinding Wheel Capacity: 20″ • Includes 2 Workrests • Equipped with Coolant System • Electrics: 440 Volt

Name: CNC cylindrical grinder Machine type: Preise TT60-20L-C1 Machining size range - diam.: 600x2000mm Controller: Fanuc Series Oi Mate-MD

grinding diameter: 250,350,450 mm grinding length: 1500 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ± 6 ° longitudinal feed of the table: 1750 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 80 mm total power requirement: 6,5 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 5,6 x 2,0 m Overhauled with geometric KELLENBERGER protocoll. Pictures of a similar 1000mm machine. Standard with: -New electric cabinet -New motor for the workpiecespindlehead -2-axis DRO Fotos of a delivered (1000U) machine with following optiones against extra ch ...

grinding diameter: 360 mm grinding length: 1000 mm centre height: 260 mm grinding wheel dia. x width: 500x80 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 450 mm grinding length: 1000 mm centre height: 225 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.The machine will be delivered overhauled. Mechanical overhaul: • Overhaul of the entire machine according to Kellenberger measuring protocol • A new service-friendly cabin • Repainting Electrical overhaul: • New, modern CNC cylindrical grinding machine control system • New built up control cabinet • New drive technology • Exchange of all electric lines, Berus pressure switch, etc. • New absolute glas scales in X- and Z- axis • New absolute rotary encoder (for B-axis) Please remark ...

Inv. Num. : 8860 Type: BUAJ 30 CNC Producer: JUNKER Created: 2002 Parameters: Control System: FANUC Series 210i-T Maximum grinding diameter: 400 mm Max. sanding length: 630 mm Weight: 2800 kg

KELLENBERGER 600U Universal Grinder Machine No. 721/441 Distance between centres 600 mm Centre height 125 mm Table orientation 11 degrees Grinding wheel for cylindrical grinding 400 x 50 x 127 mm Motor power 3 kW Spindle speed 1500 / 1700 / 2200 rpm Orientation of grinding wheel holder headstock 270degrees (3 x 90) Grinding wheel speeds 3600 rpm Boring for internal spindle 70 mm Workhead swivel 360 degrees Workhead speeds 20 - 400 rpm Wheelhead motor power : 3 kW Workhead head motor power : 0,9 kW Dimensions 2580 x 1680 x 1670 mm Weight 2200 kg

Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!

Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!

Cylindrical grinding machine (inter/exter) STUDER S20 Favorit Tailstock: 650 mm Inter. / exter. SONY 2-axis visualization Watering tray More information on request.

STUDER Favorit CNC grinding machine

Haas UHS 1980 FL Universal Hand Lever Flat Grinder - Tip height 125 mm - Center width 450 mm (optional up to 600 mm) - Grinding length 350 mm - Table clamping area 800 x 115 mm - Max. workpiece weight: approx. 40 kg - Longitudinal movement (X-axis) 350 mm - Transverse movement (Y-axis) 180 mm - Height adjustment (Z-axis) 250 mm - Swivel (horizontal) 360° - Tiltability (vertical) ± 15° to 20° - Spindle speeds 2,800 / 5,600 rpm (gradual) - Drive power 0.75 kW - 1.1 kW - Grinding wheel holder cone 1:10 (standard) - Connection 400 V / 50 Hz - Magnet LxW 255 x 150 mm LxWxH 0.9x1.0x1.4 meters / Weight 650 kg

Inv. Num. : 9005 Type: BUC 63 A Producer: TOS Created: 1983 Parameters: Maximum grinding length: 2000 mm Grinding diameter: 630 mm Maximum weight of the workpiece: 2500 kg Maximum length of the workpiece: 3500 mm Machine weight: 5000 kg

Inv. Num. : 8949 Type: BUAJ 9 NC Producer: JUNKER Created: 2005 Parameters: Maximum sanding length: 320 mm Grinding diameter: 160 mm Tip stroke: 85 mm Drive power of the grinding wheel spindle: 2.2 kW Maximum speed of the grinding wheel spindle: 3600 1/min Machine height: 1700 mm Machine length: 2300 mm Machine width: 1800 mm Machine weight: 1400 kg

Universal Tool Grinding Machine Two grinding wheels: diamond and corundum wheel Individually adjustable supports Finely adjustable guides and angle adjustments Electric motor with two-stage speed control (switching stages I / II) Stable cast iron body for low-vibration running High grinding accuracy Technical data (approx.): • Grinding wheels Ø: 125–150 mm • Motor power: 0.55 kW • Speed: 1,400 / 2,800 rpm • Electrical connection: 380 V three-phase current • Dimensions (L×W×H): 700 × 500 × 900 mm • Weight: approx. 90 kg Special features: • Two grinding wheels (diamond / corundum) • Stable angle adjustment devices • Solid cast iron housing with stable frame • Ideal for toolmaking, maintenance and precision workshops Auction-ID: 03U-EV4-5

PONAR TARNÓW RUP-28 universal grinding machine was built in 1979 in Poland by the Fabryka Obrabiarek Specjalizowanych Ponar-Tarnów. The machine is used for precise grinding of both external and internal cylindrical surfaces in order to achieve the appropriate class of surface roughness and the desired shape. The grinding process is performed on a large work table by means of a grinding wheel that reaches a speed of 45 m/s. The machine’s design has been developed to ensure the highest stability and accuracy of the performed operations during many years of intensive use. All this makes the offered RUP 28 cylindrical and internal grinding machine an excellent choice for production plants, tool shops or workshops specialised in the reconditioning of machine parts. The total weight of the machine is 2600 kg. Technical specifications of the PONAR TARNÓW RUP-28 cylindrical grinding mach ...

Auction-ID: A1-41275-209

Offered is a universal tool grinding machine: Speed: 2800rpm, grinding range: approx. 30-50mm diameter, grinding wheels: cup or dish wheels, weight: approx. 450-500kg, machine dimensions X/Y/Z: approx. 800mm/800mm/1500mm. Inspection possible by appointment.

The machine is in good technical condition, after prior agreement it is possible to test it. We offer the grinder separately, without extraction and track. For straight round or oval pipes.

The machine is in good technical condition, testing is possible by prior arrangement.

Technical data Manufacturer: Overbeck Type: 250 RU Year of Make: 1984 Workpiece diameter max.: 100 mm Max. grinding length: 250 mm Tip height: 100 mm Grinding wheel: Ø 300 mm Max. workpiece weight: 12 kg Spindle speed workpiece: 150–1350 min⁻¹ Grinding spindle: 2040 / 2440 min⁻¹ Power: 4–7 kW Weight: approx. 1350 kg (net) Configuration Hydraulic table movement Internal cylindrical grinding device Collet holder DIN 6341 Swivelling workpiece and grinding headstock Manual and automatic delivery Hydraulic quick adjustment Auction-ID: A1-45711-301

grinding length:1500 mm weight of the machine ca.:12 t Karstens EMAG H310 Universal Grinding Machine Year of manufacture: 2004 Center distance: 1500 mm Center height: 325 mm Reinforced workpiece spindle, load capacity up to 250 kg Driven C-axis for polygon, thread, and eccentric grinding. 3 individually mounted grinding spindles. Siemens 840D control system

table diameter:520 x 22 mm table - swivable:45 Grad total power requirement:1,6 kW weight of the machine ca.:130 kg dimensions of the machine ca.:520 x 520 x 1200 mm mit Schleifzylinder Zubehör: 4 ( Aluzylinder) Werkzeuge zur Aufnahme von Schleifmitteln Ø 50, 70 , 90, 120 mm x 223 mm neuer Motor

grinding diameter:600 mm grinding length:3000 mm centre height:315 mm workpiece weight max.:3000 kg work piece spindle speed:8 - 120 U/min grinding wheel motor:25 kW grinding wheel speed:45 m/sec grinding wheel width x diameter:750 x 80 mm table speeds:30 - 4500 mm/min feeds of grinding head:0 - 5 mm/min table swivelabel +/-:7,5 ° total power requirement:55 kVA weight of the machine ca.:18 t dimensions of the machine ca.:11,5 x 4 x 2,2 m - Internal grinding device - taper grinding up to 10,1° based on diameter - automatic grinding cycle - grinding wheels and flanges - dressing device - coolant attachment - dust exhauster, various steady rests

grinding diameter:380 mm grinding length:1000 mm centre height:180 mm grinding wheel diameter:400 mm max. workpiece weight between centres:250 kg total power requirement:10 kW weight of the machine ca.:4,1 t dimensions of the machine ca.:3 x 2 x 1,6 m with internal grinding attachment with fixed and swivelling headstock with coolant tank

-High performance -Belt grinding device height-adjustable 0-90° -Maximum usable face grinding surface -Belt adjustment with fine adjustment -Combined belt grinding/grinding machine -Longitudinal stop for material guidance -Perfectly balanced and low vibration -Double-sided connection for dust extraction Ø 50 mm -Motor circuit breaker with undervoltage trigger -Fixed stop -1 sanding belt standard (brown), grain 80 -1 grinding wheel 250 x 40 x 51 mm, grain 80 -Spark protection -Connection cable with CEE plug -with machine stand, EMERGENCY STOP push button, brake and suction Delivery: in Germany free domicile incl. packaging

Pot discs - diameter:175 mm spindle extension:180 mm operating voltage:400 V Machine weight approx.:300 kg room requirements approx.:0.90 x 0.60 x 1.80 m

Code 0776 Description Surface grinding machine Make ELB Type SWBD 030 MCNC82 Machine No. 18.346.0383 Manufacturing date 1983 Control MCNC / 82-PC Tablesize 3520 x 600 mm Table grinding size L x B x H 3000 x 600 x 600 mm Magnetical plate size L x B 3000 x 400 mm Speed table movement 0,2 – 6 m/min. Max. distance table – centre grinding wheel 850 mm Speeds vertical 3 – 375 mm/min. Speeds cross 1,2 m/min. Speeds grindingwheel stepless 750 – 1400 omw/min Grindingstone: Ø 600 x Wide:100 x Bore: 200 mm Weight 18.000 kg Motor power 37 kW – 380 Volt Accessoiries Electro table 3000 x 400 mm Grinding unit with water cooling Filtering unit with paperfilter Profile grinding unit Condition Machine is in very good condition

GER RS-12/50 surface grinding machine. Grinding area: 1200x550mm. Distance table-centre of spindle: 625mm. Table speed: 2 to 25m/min. Maximum table travel: 1250mm. Maximum work weight: 1200Kgs. Maximum cross travel: 500mm. Grinding wheel size: 400x80x127mm. Manual diamond grinder. Vertical orientable headstock. Vertical automatic feed. Power of grinding spindle: 12,5cv. Weight: 4500Kgs.

NC – controlled precision rotary table face grinding machine with vertical grinding spindle and cup grinding wheel - brand new Rotary table diameter 400 mm Largest grindable diameter 400 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 75 kg Cup grinding wheel Ø 200 mm x H 80 mm Grinding wheel speed 280 to 2,800 rpm infinitely variable Maximum workpiece height 170 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 3 kW Rotary table drive power 0.5 kW Weight approx. 650 kg

ELB Perfect BD 15 PLC surface grinding machine, grinding area 1500 x 550 mm, grinding wheel 400 x 100 mm, electric perm magnetic clamping plate 1500 x 550 mm, automatic dresser with compensation, paper belt filter, the machine is overhauled, grinding spindle rebeared, guideways are scraped, meets the tolerance of a new machine. We are happy to take over the installation / training on site, as well as the subsequent service

Magnetic table 455 x 170 mm Digital Water tank Pulling device Wet grinding device

Precision Surface and Profile Grinding Machine FS1570 SL Grinding area: 1500 x 700 x 650 mm Grinding spindle motor: 18 KW Table drive: hydraulic Transverse drive: electromechanical Paintwork: RAL 6011 – reseda green Equipment: •Central lubrication • Wet grinding device • Fine adjustment knob on the transverse path handwheel • Dressing Diamond • Electro magnetic clamping plate 1500 x 750 mm • Magnetic plate adhesive force control Accessories: • Vertical automatic type SL with "LCD" flat screen and membrane keypad • Electric Straight Dresser • Stepless change of speed • Universal paper filter machine • Machine light • Column elevation by 200 mm • Precision balancing scale • 2 new grinding wheels Machine has been overhauled in 08/2018 "Invoice is available" Here's what was done: •Timing belt •Storage • Ball screw •  ...

ELB Perfect BD 10 750 PLC, Year of construction 2008 Control Siemens STC Grinding area 1000 x 750 mm Grinding wheel 400 x 100 mm Grinding spindle 10 KW Electro Perm Magnetic Clamping Plate 1000 x 750 mm Automatic straight-dressing device with compensation Coolant system with paper belt filter Machine is immediately ready for use CE compliant Installation / on-site training included

Favretto 500, Rotary table surface grinding machine, horizontal spindle, dia 500mm, electric elettrico with DRO