universal internal grinding used for sale

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: Fanuc 310is total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Completely machanically overhauled with grinding process and setup of one part. Original photo taken on the EMO 2010. CNC control GE Fanuc 310is Hand panel for CNC control GE Fanuc Wenger loader optional Turned part with automatic indexing 1° Grinding head UR 1-2-3 Grinding wheel equipment left 500 x 80 mm Grinding wheel equipment right 400 x 63 mm Operating unit for one high-speed internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing unit on the upper table Swivelling holder for PCD diamond plates Basic module for KEL-TOUCH gate sensor and KEL-BALANCE balancing devices KEL-TOUCH lead sensor for universal grinding head va ...

Machine type: EVT 80 Manufacturer: ERBA Power kW: 0.75 Total volume: 80 lt. Description: The EVT 80 long trough mass finishing machine from ERBA has a durable, hot-cast polyurethane lining. Emptying or separation is carried out via bottom emptying (manual/pneumatic). By means of insertable partitions, the work container can be divided into compartments for individual processing of the parts. The machine has an electrical control cabinet and can be equipped with fully automatic PLC process control (optional). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associa ...

Machine type: EVT 130 Manufacturer: ERBA Power kW: 1.1 Total volume: 130 lt. Description: The EVT 130 long trough mass finishing machine from ERBA has a durable, hot-cast polyurethane lining. Emptying or separation is carried out via bottom emptying (manual/pneumatic). By means of insertable partitions, the work container can be divided into compartments for individual processing of the parts. The machine has an electrical control cabinet and can be equipped with fully automatic PLC process control (optional). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and assoc ...

Machine type: EVT 170 Manufacturer: ERBA Power kW: 1.1 Total volume: 170 lt. Description: The EVT 170 long trough mass finishing machine from ERBA has a durable, hot-cast polyurethane lining. Emptying or separation is carried out via bottom emptying (manual/pneumatic). By means of insertable partitions, the work container can be divided into compartments for individual processing of the parts. The machine has an electrical control cabinet and can be equipped with fully automatic PLC process control (optional). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and assoc ...

grinding length: 4000 mm grinding width: 1100 mm workpiece height: 1100 mm total power requirement: kW weight of the machine ca.: 21 t dimensions of the machine ca.: m Modernisierte Präzisions-Flach-und Führungsbahnschleifmaschine aus Überholungsbetrieb. Geschliffen wurden unter anderem Betten für neue KERN Drehmaschinen. -Digitalanzeigen nachgerüstet -Umbau auf Kugelrollspindeln in der Querachse -Schleifspindel für Umfangsschliff -schwenkbare Schleifspindel für Untergriffe -Originalschabbild in der Längsachse -Elektrik erneuert -Aufspannfläche 4300 x 1500 mm Bei Nutzung einer Grube können wesentlich höhere Werkstücke geschliffen werden! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg

Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Control type (cnc/manual): Manual, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Plow (auto/manual): Automatic , Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Tall: 1420 mm, Weight: 4200 Kg

Distance between points: 500 mm, Height of points: 100 mm, Ø of the grinding wheel: 300 mm, Normal grinding wheel width: 25 mm, Maximum usable width of the grinding wheel: 50 mm, Grinding wheel hole: 127 mm, Workpiece holder head: 75-110-150-220-275-375-550-750 rpm, Tilt table in degrees: 8º, Hydraulic table speed: 0.10/6 m/min, Automatic fast forward: 20 mm, Advance in depth: 0.10 to 1 mm, Plongee feed rate: 0.10-5 mm/min, Fine-tuning time regulation in seconds: 60s, Workpiece holder head motor: 2 speeds: 0.38/0.55 HP, Motor head for grinding wheels: 3 CV, Hydraulic pump motor: 0.5 HP, Cooling pump motor: 0.10 HP, Internal grinding apparatus: 0.75 HP, Points: Morse 4 and 3, Weight approx.: 1600 Kg

Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Plow (auto/manual): Automatic, Maximum length to be rectified in plongeé: 200 mm, Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Tall: 1420 mm, Weight: 4200 Kg

Universal Radius Metal Belt Sanding Machine Specifications: - Sanding belt dimensions 2000 x 75 mm - Surface grinding opening 400 x 75 mm - Support vise – angle adjustable 90° - 30° - Support fine adjustment via handwheels - Sanding belt speed 30 m/sec. - Working height 960 mm - Various sanding rollers Ø 25 , 30 , 39 , 45 , 57 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 125 kg

max. dia. of grinding wheel: 175 mm boring diameter: 32 mm max. width of grinding wheel: 25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Surfaces reference plates, roughness measures MASSI cylindrical grinding TGL 4763 Rz 0.8 μm - Rz 20 μm in wooden box Dimensions: 345 x 125 x 40 mm

Surface reference plates, roughness measures MASSI cylindrical grinding TGL 4763 Rz 0.63 μm - Rz 2.5 μm in wooden box Dimensions: 240 x 125 x 40 mm

Surface reference plates, roughness measures MASSI cylindrical grinding TGL 4763 Rz 0.1 μm - Rz 0.4 μm in wooden box Dimensions: 240 x 125 x 40 mm

Surface reference plates, roughness measures MASSI surface grinding TGL 4763 Rz 0.063 μm - Rz 0.16 μm in wooden box Dimensions: 240 x 125 x 40 mm

Surface reference plates, roughness measures MASSI cylindrical grinding TGL 4763 Rz 1.6 μm - Rz 20 μm in wooden box Dimensions: 240 x 125 x 40 mm

Surfaces of reference plates, roughness measures MASSI surface grinding TGL 4763 Rz 1.6 μm and Rz 6.3 μm in wooden box Dimensions: 130 x 120 x 30 mm

Surface reference plates, roughness measures MASSI surface sanding TGL 4763 Rz 0.8 μm - Rz 20 μm in wooden box Dimensions: 345 x 125 x 40 mm

Cup Grinding Wheels FAG N13001 150 x 80 x 20. A 130x64 2 pieces ! New ! Dimensions: 170 x 170 x 180 mm

Grinding spindle DKF 2 . 7 - 4 / 1 ( 2.7-4/1 ) n max: 16500 rpm Ø 70 mm Tool holder: Ø 25 x 30 mm / Ø 13 x 20 mm Dimensions: 335 x 80 x 80 mm

Grinding spindle DKF 3.8 - 7 / 1 ( 3.8-7/1 ) TGL 4870 ( TGL4870 ) n max: 14000 rpm Ø 80 mm Dimensions: 550 x 80 x 80 mm M15 x 1.0 left-hand thread

Grinding spindle DKF 3.4 - 3 / 2 ( 3.4-3/2 ) TGL 4870 ( TGL4870 ) n max: 32000 rpm Ø 40 mm Dimensions: 285 x 40 x 40 mm

Grinding spindle FEMINA 3.4 - 3 / 1 ( 3.4-3/1 ) TGL 4870 ( TGL4870 ) n max: 32000 rpm Ø 40 mm Dimensions: 260 x 40 x 40 mm

Tool grinding machine WMW SWA 200 grinding diameter max Ø 600 mm grinding length max 470 mm table movement longitudinally 470 mm Tool holder MK2 swivel 0-6 °, 90° Speed range: 1260 - 3100 rpm 0,0.0 4 kW 220 / 380 V used, tested ! Dimensions: 1100 x 1100 x 1500 mm

Tool grinding machine HENDEL+KUBASCH WBV year: 1961 grinding diameter max: 50 mm grinding length: 250 mm workpiece length: 300 mm motor: 0.0.00 mm 7 kW 380 V used, tested !' Dimensions: 1000 x 1000 x 1400 mm

Grinding spindle DKF 3.8 - 8/2 ( 3.8-8/2 ) TGL 4870 ( TGL4870 ) n max: 14000 rpm Ø 80 mm Dimensions: 635 x 80 x 80 mm

Grinding spindle CCCP BC3 - 70 80 x 300 N 7614 n max: 12000 rpm Ø 80 / 90 mm Dimensions: 450 x 95 x 95 mm M12 attachment: Ø inside 15,Dimensions: 450 x 95 x 95 mmbr /M12br /br /Attachment: Ø inside 15,Dimensions: 450 x 95 x 95 mmbr /br /M12br /br /Attachment: Ø inside 15,05,00 9 mm; Ø outside 28 mm Drive: Ø inside 28.5 mm; Ø outside 40.6 mm

Grinding spindle DKF 6.6 251 / 21 ( 6.251/21 ) n max: 12500 rpm Ø 80 mm conical on both sides Ø 28 to 21 mm x 56 mm flattened to 24 mm Ø 28 to 21.5 mm x 45 mm Dimensions: 360 x 80 x 80 mm

Grinding spindle DKF 5.12-7/21 TGL 4870 ( TGL4870 ) n max: 4000 rpm Ø 125 mm Dimensions: 590 x 125 x 125 mm

Grinding spindle DKF 2.6 - 4 / 1 ( 2.1 6-4/1 ) TGL 4870 ( TGL4870 ) n max: 20000 rpm Ø 60 mm Mounting hole: Ø 13.5 mm (conical) Drive: Ø Spigot: 17.9 mm; Ø Thread: M10 x 1 Dimensions: 300 x 60 x 60 mm

Grinding spindle DKF 2.10-7-1 TGL 4870 ( TGL4870 ) n max: 10000 rpm Ø 100 mm Dimensions: 520 x 100 x 100 mm

Grinding spindle PAGUS P80x160R 5554 Ø 80 mm Dimensions: 260 x 90 x 80 mm

Wide belt sanding machine for wood, veneer and varnish Ernst LBK 1300 Grinding width: 1300mm Transverse grinding unit Longitudinal grinding unit

Surface Grinding Machine JONES & SHIPMAN 540 LAR, capacity 450x150 mm, magnetic plate. Automatic cycle, Max working dimensions: 450x170 mm, Longitudinal travel x axis: 470 mm, Cross travel y axis: 171 mm, Clearance between worktable and spindle axis: 502 mm, Feed rate x axis: 2-25 m/1, Feed rate y axes: 0 - 1 m/1, Wheel speed: 0 - 2640 rpm, Wheel dimension: 200x20x31,75 mm, Spindle motor power: 1,5 Kw, Weight: 1.000 Kg, Accessories: Magnetic plate, Auto cycle, Power rise and fall, DRO

Surface Grinding Machine JONES & SHIPMAN 540 X, capacity 450x150 mm, magnetic plate, dust extractor, OPTIDRESS E Factstor 2, Max working dimensions: 450x170 mm, Longitudinal travel x axis: 470 mm, Cross travel y axis: 171 mm, Clearance between worktable and spindle axis: 502 mm, Feed rate x axis: 2-25 m/1, Feed rate y axes: 0 - 1 m/1, Wheel speed: 2640 rpm, Wheel dimension: 200x20x31,75 mm, Spindle motor power: 1,5 Kw, Weight: 1.200 Kg, Accessories: Coolant tank, dust extractor, magnetic plate, OPTIDRESS E Factstor 2

Wide belt grinding machine OTT RS-O Grinding width: 1300mm Calibration roller + fine sanding + cleaning brush

Surface Grinding Machine FAVRETTO MC130, 1300x700 mm, magnetic plate, sistem Digit Plus FAVRETTO, Information about technical data are not binding., Machine available subject to prior sale., Max working dimensions: 1500x750 mm, Working table size: 1300x500 mm, Longitudinal travel x axis: 1640mm, Cross travel y axis: 650 mm, Clearance between worktable and spindle axis: 850 mm, Feed rate x axis: 1 - 40 m/1, Feed rate y axes: 0 - 2000 m m/1, Wheel speed: Stepless by Variable speed drive AC, Wheel dimension: 400x152,4x100 mm, Spindle motor power: 15Kw, Nc: Digit FAVRETTO, Weight: 8.000 Kg, Accessories: Electro permanent magnetic plate 1300x500 mm, coolant tank with paper filter

Wide belt grinding machine Boere Elite 1300 BK Grinding width max. 1300mm Grinding calibration roller from below

(3) Mikrosa SASL 5 CNC (size similar to Kronos M, MX, L) CNC overhaul and retrofit in progress full overhaul and CNC retrofit (pending) komplett Ueberholung + CNC retrofit Grinding wheel 500mm wide x 610mm dia. CNC 5 axis / 5 axis Mikrosa SASL 5 CNC photos of the last finished machine, for reference only complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul Elimination of hydraulic movements Application CNC Siemens 840D 5 axes controlled in position with digital brushless motors: - Operating wheel axis motor with optical scale - 4 dressing axes: 2 on the grinding wheel, 2 on the regulating wheel - rotating axis with adjustable speed motor on regulating wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to adjust RPM / peripheral speed (m/sec) Set-up for through-f ...

Manufacturer: ALPA Model : RT 2100 Type of machine : surface grinding machine Year of manufacture : 1997 - Max workpiece width: 600 mm - Max workpiece length: 2100 mm - Magnetic table: 2000 x 400 mm Equipped with: - Wheel dresser - Electronic control unit Mod. MT 2000/R - Electrospindle for conical grinding - Electronic plate from Tecnomagnete - Coolant tank Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer : MININI Model : PL 65-10 Year of manufacture : 2005 Type of machine : Surface grinding machine - Max width: 600 mm - Max length: 1000 mm Equipped with: - Electronic magnetic table 1000 x 600 - Fume extractor - Coolant tank Find more here - .ucymachines/ Contact us at - sales@ucymachines

Machine Type: Center Grinding Machine Manufacturer: Henninger Model: ZS 200 Year: Not specified - Max Workpiece Length: up to 2000 mm - Workpiece Diameter: 285 - 325 mm - Center Diameter: 2 - 110 mm - Bore Taper: 50 - 120 mm - Center Height: 165 mm - Wheel Diameter: 10 - 60 mm - Grinding Wheel Speed: 9150 - 18300 RPM - Power: 0.4 kW - Weight: 0.5 tons Equipped with: - Pneumatic centering device

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg

grinding diameter: 630 mm grinding length: 600 mm centre height: 320 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine wird überholt nach Kellenberger Messprotokoll und neu lackiert. Die anfällige Güttinger Steuerung wird durch die zeitgemäße BEMA X Steuerung ersetzt. Das heißt die Maschine erhält in diesem zuge auch eine komplett neue Elektrik. Siehe Beispielfotos. Maschine mit verstärktem Werkstückspindelstock zum fliegend Schleifen von schweren Werkstücken. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel dimensions (od x id x width): Ø300 x Ø175 x 125 mm, Ø min/max to be rectified: 1.5 - 50 mm, Regulating wheel dimensions (od x id x width): Ø220 x Ø125 x 125 mm, Grinding wheel width: 125 mm, Number of revolutions engine power: 2,100 rpm, Grinding wheel head motor power: 7.5 HP, Total power: 8,5 Kw, Weight: 1.450 kg

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg

Various flanges

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Plow (auto/manual): Automatic, Maximum length to be rectified in plongeé: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg