136,887 used machines on RESALE, but how to find them? Machine Search
offer 21055 Double polishing block Specifications: - Grinding wheel diameter approx. 300 mm - Grinding wheel width approx. 40 mm - Grinding wheel bore approx. 70 mm - Disc speed 1450 rpm - Working height 1100 mm -Mot. Dust extraction - Drive 400 V / 1.1 kW - Space requirement approx. W 800 x H 1250 x D 600 mm - Weight approx. 150 kg
Extraction system from a tool grinding machine Vollmer. With the extraction system, hot or glowing chips can be extracted from grinding machines, e.g. from surface grinding machines Elb or from e.g. tool grinding machine Saake or Deckel and others. Power supply 400Volt. The machine is equipped with a chip drawer and sucks through a pocket filter which can be cleaned by means of a crank and vibration. Special price
KED II HDZ drum sander or belt sander for sanding timber and other materials. Technical data: Sanding belt: 300 x 1,010 mm Motor: 2.2 kW Dimensions (L x W x H) approx.: 1,050 x 600 x 1,000 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany
Bed length: 4500mm, control voltage: 220V, operating voltage: 380V, rated current: 110A, rated current, slow-blow fuse: 125A, connected load: 58kW, weight: 35t, with tailstock, clamping device, external electric motor for roll rotation, control panel, storage table, five steady rests and additional accessories. An on-site inspection is possible.
Fine mill / impact disc mill Grinding disk diameter: 800 mm Drive: 90 kW new machine Scope of application: NEUE HERBOLD Impact Disc Mills of the ZM series are fast-running fine mills for pulverizing brittle, medium-hard or impact-resistant materials and granules. Typical application is the fine grinding of H-PVC / PE / PC / etc. Impact Disc Mills from the NEUE HERBOLD process e.g.: - Pipe and profile regrind from extrusion - Pre-shredded panel and edge strip waste - slides - Amorphous and brittle products from the areas of the food industry, the chemistry and pharmacy
aba FF 625 Surface grinding machine ABA Precision Surface Grinding Machine FF600/25 Grinding length 600mm Scrap width 250mm Electric Magnet 600x250mm Workpiece height 400mm Diamond puller Height adjustment digital Motor 3,27 KW 400 V 50 HZ Coolant device Grinding wheels and flanges Weight: approx. 1350 kg G&-5020-M1768
Knife sharpening machine clamping length 820mm V 380 kW 0.75
We offer a complete set of original Kellenberger documents , for increasing the tip height by 50 mm. These are ground to a height. The overall picture shows the condition of the documents before post-processing
Various high-quality grinding wheels DM= 220mm, width 30 + 40mm, open-pored grain size 80 - 100- 120. Can be used for JUNG with bore dm 76.2mm, intermediate ring made of aluminium dm 76.2/50.8mm available.
This 3-axis OKAMOTO ACC 84DX surface grinding machine was manufactured in 2013. It features a table size of 800 x 400 mm and a stone diameter of ø355 mm. With its robust design, this machine is ideal for precision grinding applications. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC 84DX machine we have for sale. Contact us for further details.
Cylindrical grinding machine manufactured in 2015. This OKAMOTO OGM 250 UNC III features a maximum machining diameter of 200 mm and a distance between centres of 500 mm. It includes an X-axis travel of 215 mm and a Z-axis travel of 762 mm, providing efficient grinding capabilities. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO OGM 250 UNC III machine we have for sale. Contact us for further details.
offer 23034 Specifications: - grinding length approx. 350 mm - grinding width 150 mm - installation height with / without magnet 150 / 210 mm - Grinding wheel stroke approx. 200 mm - Clamping surface 300 x 160 mm - Magnetic clamping plate 250 x 150 mm - Grinding wheel dimensions approx. 200 x 80 x 78 mm - Grinding wheel speed 2800 rpm - Swivel range of the grinding arm approx. 180 ° - manual swivel arm clamping via clamping lever - Wet grinding device - Drive 400 V / 1.85 kW - Space requirement approx. W 850 x H 1650 x D 800 mm - Weight approx. 350 kg
Manufacturer: ELB Type: SWN 6 VA2 Year of construction: 1982 Grinding length: 600 mm Grinding width: 320 mm Workpiece height: 525 mm Table clamping surface: 600x300 mm Magnetic plate: 600x300 mm Machine dimensions: 2600x1500x2000 mm Machine weight: ca. 2t
We have about 50 different guide rails, different length/width and height for sale. The guide rails are HSS and HSS with HM. Partly new or used . Please contact us so that we can make you an offer.
We clear our grinding wheels warehouse, there are new wheels unused, undamaged. They are exclusively ceramic-bonded discs. Diameter from 200 mm - 500 mm Width from 10 mm - 40 mm Different bonds and hardness. Please contact us so that we can make you an offer. The discs are sold at reasonable prices.
- E L B - HIGH-PRECISION ROTARY TABLE SURFACE GRINDING MACHINE TYPE: ROTARY 80 SPS-NK / YEAR OF CONSTRUCTION 2002 = GRINDING DIAMETER : 800 mm GRINDING HEIGHT : 400 mm (from work table) TABLE LOAD : 300 kg Machine dimensions : 2800 X 2800 X 2660 mm ( WxDxH) Machine weight : 5,500 kg Motor version : DS flange motor Grinding spindle drive : 10 kW Grinding spindle speed : adjustable via frequency controller Grinding spindle cone : 60 mm Grinding wheel : 400x100x127 mm Control voltage : 24V DC Installed power : 20KW Fuse : 50A FULL ROOM COVERAGE
Surface Grinding HARIG Super 612 - No 2 Travel X: 300 mm Travel Y: 170 mm Travel Z: 250 mm Grinding wheel: Ø 200 mm Spindle motor: 3600 RPM Manual movement X - Y - Z Manual magnetic tray 345 mm x 145 mm Auto lubrication axes X and Y Delivered with 2 new grinding wheels 1 vacuum cleaner Voltage: 380 V Width: 1400 mm Depth: 1500 mm Total height: 1900 mm Weight: approx 1 T
This 3-axis FALCON FSG-3A1224H surface grinding machine was manufactured in 2015. It features handwheel graduations of 0.01 mm, 0.002 mm, and 0.2 mm for precise adjustments. The dedicated pendant control panel includes an emergency stop button and an analog meter for enhanced operational safety. If you are looking to get high-quality grinding capabilities, consider the FALCON FSG-3A1224H machine we have for sale. Contact us for further details.
Robotic grinding cell with a KAWASAKI RS50N robot was built in 2018 in Italy by DAN di De Antoni Srl. The system is designed for the automatic grinding of aluminium castings, door handles and other components that require a precise surface finish. The cell can also be adapted for polishing and other finishing processes. Grinding takes place within a closed work space using a specially designed grinding unit. It is equipped with two vertical grinding wheels and an intelligent pressure force system that automatically adjusts the pressure force during operation. This solution effectively removes surface irregularities and ensures repeatable machining results, which is particularly important in mass production. Any contamination generated during grinding is removed on an ongoing basis. The robotic grinding station is equipped with a KAWASAKI RS50N grinding robot with a payload of 50 kg ...
Surface Grinding HARIG Super 612 - No 1 Travel X: 300 mm Travel Y: 170 mm Travel Z: 250 mm Grinding wheel: Ø 200 mm Spindle motor: 3600 RPM Manual movement X - Y - Z Manual magnetic tray 345 mm x 145 mm Auto lubrication axes X and Y Delivered with 2 new grinding wheels 1 vacuum cleaner Voltage: 380 V Width: 1400 mm Depth: 1500 mm Total height: 1900 mm Weight: approx 1 T
Specifications: - Sanding belt dimensions approx. 50 x 2500 mm - Contact wheel diameter approx. 250 mm - Drive 400 V / 5.5 kW - Space requirement approx. W 1350 x H 2050 x D 900 mm - Weight approx. 200 kg
Sharpening machine for band saw blades Manafacture: Alber Sharpening machine for band saw blades Sharpening circuit Fabr. Alber Model: TB1 - AE2 Year of construction: 1978
Surface grinding machine manufactured in 2016. This OKAMOTO ACC 52 SA features a grinding length of 500 mm and a grinding width of 200 mm, with a maximum table load of 200 kg. The hydraulic table feed rate reaches up to 27 m/min, and the spindle speed can go up to 3,500 rpm. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC 52 SA machine we have for sale. Contact us for further details.
Specifications: - Polishing wheels - grinding wheel dimensions approx. 300 x 40 x 76 mm - Sanding belt dimensions approx. 3500 x 50 mm - Contact wheel dimensions 400 x 50 mm - Drive speed 1450 rpm - Drive 400 V / 1.8 kW - Space requirement approx. W 1100 x H 2450 x D 800 mm - Weight approx. 300 kg
Cylindrical grinding machine manufactured in 2019. This TOS HOSTIVAR UB 25-1000 features a maximum swing diameter of 280 mm and a distance between centres of 1,000 mm. It includes a grinding head swivel range of ±45° and a rapid traverse speed of 2,000 mm/min. If you are looking to get high-quality grinding capabilities, consider the TOS HOSTIVAR UB 25-1000 machine we have for sale. Contact us for further details.
The STUDER Internal Grinding Spindle Type 102560B 60,000 rpm is available for sale as a kit with accessories and tools as shown in the photographs. The set includes: STUDER Internal Grinding Spindle Type 102560B Different wheel chucks / accessories for internal grinding Tools and wrenches for assembly and adjustment Support and auxiliary elements Wooden box for storage and transport Condition: Used, from industrial machinery. Ideal set as a spare part or equipment for compatible STUDER grinding machines. The complete kit shown in the photographs is sold. For more information, price, measurements, compatibility or shipping conditions, please do not hesitate to contact us. Available for domestic and international shipping.
Shaft grinding machine with belt grinding attachment Specifications: - Flexible shaft 1500 mm - 5 speeds - Belt grinding attachment - Drive 380 V - mobile underframe - Space requirement approx. W 600 x H 1400 x D 600 mm - Weight approx. 80 kg
Workpiece holder head compatible with STUDER S30 and S40 grinding machines, completely rebuilt, overhauled and repainted by specialists in grinding machinery retrofit. The unit has undergone a complete reconditioning process to ensure excellent mechanical condition and a presentation in keeping with a rebuilt machine. Features: - Completely rebuilt and overhauled. - Mechanical components inspected and adjusted. - Revised engine and assembly. - Completely renewed paint. - Excellent general condition. - Ready for installation. - Compatible with STUDER S30 / S40. An excellent choice for replacing a worn head or for repair and retrofit projects of STUDER grinding machines. Immediate availability. For more information, photographs, technical characteristics or price, contact us.
Specifications: - Flexible shaft 1500 mm - infinitely variable speeds 1000 to 12000 rpm - Drive 380 V - mobile underframe - Space requirement approx. W 750 x H 1400 x D 500 mm - Weight approx. 50 kg
Disc grinding machine Grinding machine for plates, bowls, rings, wheels, etc. Manufacturer: Hempel Model No.: PQ-4 Year of construction: 1982
Surface grinding machine manufactured in 2006. This STAEHLI DLM 450 features a lapping wheel diameter of 450 mm and a maximum lapping wheel speed of 110 rpm. It has a robust machine weight of 2100 kg and dimensions of 1200 × 1650 × 2050 mm. If you are looking to get high-quality lapping capabilities, consider the STAEHLI DLM 450 machine we have for sale. Contact us for further details regarding this machine.
EWAG RS 15 Conventional Grinding Machine TECHNICAL FEATURES: X-axis travel: 490 [mm] Y-axis travel: 130 [mm] Z-axis travel: 115 [mm] Spindle power : 2.2 [kW] B-axis angular travel: 260 [°] Workpiece Spindle Nose: HSK 63 Inverter speed drive: Yes Visualization: RSF-Elektronik Visualization number of axes: 3 Irrigation tray capacity: 100 [l] Centralized Lubrication: Yes Supply voltage: 400 [V] Dimensions: 1700 x 1750 x 1840 [mm] Weight 1850 [Kg] Machine visible under tension for testing at our premises, by appointment. Price excl. VAT on request, including truck loading. Possibility of shipping throughout France as well as internationally. More photos and details on request. Technical description for information purposes only, without obligation on our part. Machine for sharpening tools, milling cutter, tap and drill. Mach ...
Belt grinding station, support table with T-slot, Sanding belt width 100 mm, Sanding disc D 300 mm, with support table 350 x 140 mm, Suction connection available. Motor power: 0.9/ 1.3 kW 400 V/ 50 Hz 1450/ 2900 rpm Connection cable with CEE plug 16 A Machine dimensions: H 1450 x D 410 x W 900 mm Weight approx. 200 kg Transport vertical, bolted to EURO pallet.
EWAG RS-15 Conventional Grinding Machine TECHNICAL FEATURES: X-axis travel: 490 [mm] Y-axis travel: 130 [mm] Z-axis travel: 115 [mm] Spindle power : 2.2 [kW] B-axis angular travel: 260 [°] Workpiece Spindle Nose: HSK 63 Inverter speed drive: Yes Visualization: RSF-Elektronik Visualization number of axes: 3 Irrigation tray capacity: 100 [l] Centralized Lubrication: Yes Supply voltage: 400 [V] Dimensions: 1700 x 1750 x 1840 [mm] Weight: 1850 [Kg] Machine visible under tension for testing at our premises, by appointment. Price excl. VAT on request, including truck loading. Possibility of shipping throughout France as well as internationally. More photos and details on request. Technical description for information purposes only, without obligation on our part. Machine for sharpening tools, milling cutter, tap and drill. Mac ...
This 3-axis KNUTH HFS 30638 C surface grinding machine was manufactured in 2015. It has a weight of 1,960 kg and has operated for approximately 9,200 hours. If you are looking to get high-quality grinding capabilities, consider the KNUTH HFS 30638 C machine we have for sale. Contact us for further details.
Long belt sanding machine, veneer sanding machine, Specifications: Table width 2800 mm Grinding width 2500 mm Table depth approx. 2000 mm Sanding belt length 9500 mm Pressure lamellar belt length 10 mm x 7750 mm Sanding belt dimensions 150 mm x 9500 mm Belt speed 25 + 12.5 m/s Suitable for intermediate paint sanding Workpiece height 6 - 220 mm Grinding engine power 24 kW Total power 27 kW Machine dimensions approx. L 5000 x W 2300 x H 2400 mm Space requirement of the machine in width is 3500 mm Machine weight 2600 kg TOP condition, technical documentation, sanding belt.
Technical data of the used Equiptop ESG-1228ASD Tangential Rectification: Magnetic plane: 712 x 330 mm Automatic working stroke: 760 mm (manual 830 mm) Grinding wheel diameter: 355 mm Grinding wheel thickness: 50 mm Engine: 7 1/2 hP Automatic diamond maker Increased working height CE certified; Year: 2000 Machine in excellent condition, CE certified.
Cross belt grinding machine Ashton AIS / XDIA Model AIS/3350 / XDIA S/N XP 20100082 (by Glasmek AB Sweden, renovated in 2005) Manufacture: Ashton Industrial Sales LTD / UK Year of manufacture approx. 2000 Professional high-performance glass grinding machine 2x diamond bracelet transverse straps High-speed abrasives and diamond abrasives 400 V , 50 Hz Ball roller tables for easy movement of the glass panes. Table dimensions: L x W x H = 3.85m x 1.20m x 0.9m Weight 600 kg CE marked
SPECIFICATIONS: Max. machining width: 800mm Working height: 150mm Installed power Kw: 3.0 2 brushing units consisting of 4 counter-rotating brushes Ø250mm x 220 mm Transport carpet with speed control Controller
grinding length: 900 mm grinding width: 510 mm workpiece height: 400 mm table surface area: 800 x 400 mm longitudinal feed of the table: max. 980 mm table speed -stepless-: 1 - 35 m/min grinding wheel size: 355 x 51 x 127 mm cross feed of the table: 460 mm cross feed: 1 - 40 mm/Hub vertical feed autom.: 0,005 - 0,04 mm/Hub rapid traverse vertical: 0,5 m/min grinding spindle speed: 1450 U/min grinding spindle drive: 5,6 kW table load capacity: max. 1000 kg total power requirement: 10 kW weight of the machine ca.: 4,4 t Accessories: magnetic plate 800 x 400 mm, various grinding wheels with and without flanges, wet grinding attachment with paper band filter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 3-axis ELB Schliff Perfket 6 SPS-NK was manufactured in 2004. It features a grinding range of 600 mm in length, 400 mm in width, and 475 mm in height. The machine has a maximum table load capacity of 600 kg and a longitudinal stroke of 700 mm. If you are looking to get high-quality surface grinding capabilities, consider the ELB Schliff Perfket 6 SPS-NK machine we have for sale. Contact us for further details.
Technical data of Used Universal cylindrical grinding machines Cometa HSP 2000: Wheel diameter: 762 mm Max diameter working: 800 mm Center height: 410 mm Working lenght: 2000 mm Wheel power: 15 hP Weight: 11 ton
maximum number of results exceeded
please refine your search
10 € 
