universal internal grinding used for sale

Stephan UM44 Universal Machine two speeds 1450/2900rpm with knife insert and meat grinder Tiltable for removing the processed medium neat condition, should still be thoroughly cleaned before use Video about test run available

A CNC universal tool milling and drilling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, quill stroke: 95mm, spindle power: 12kW, spindle speed: 4200rpm, spindle swivel: +/-75°, tool holder: SK40, clamping force: 12kN, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4400mm/4250mm/2300mm, weight: approx. 4500kg, control: Heidenhain TNC 425. Documentation available. An on-site inspection is possible.

Parallel Lathe WABECO D6000E Between points: 600 mm Maxi Ø on bench: 270 mm Maxi Ø over saddle: 170 mm Spindle speed: from 45 to 2300 RPM Multifix turret type A Concentric 3-jaws chuck Ø 100 mm (NEW) Year of construction: 1998 (machine very little used) Spindle speed by variator Tailstock CM2 Scale 2 axes EAE type Mikronel 220 L Supplied with one clamp tie rod Accessories: 5 tool holders + different thread wheels Voltage: 220 V mono Dimensions (L x W x H): 1500 x 900 x 1700 mm Weight: approx 200 kg

Travel X/Y/Z: 495mm/205mm/355mm, table clamping surface: 1060mm, spindle bore: 46mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 4300mm/2100mm/1750mm, weight: approx. 1900kg. Only with counter bearing for arbor mandrels, key, and hobbing arbors. The machine shows bearing noise and play on the X-axis. Documentation available. An on-site inspection is possible.

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: Emerson Macchine Torino Type: Carrera 700 Year of Make: 2021 Specifications: Table size: 1,320 x 320 mm • X - Y stroke: 1,000 x 290 mm • Stroke of the Z-table: 400 mm • Distance from spindle table: 140 - 540 mm • Distance from spindle to column: 200 - 550 mm • Spindle stroke: 120 mm • Spindle taper: ISO 40 • Drilling capacity: 30 mm • Tapping capacity: M 16 • Vertical spindle speed: 90 - 2,000 rpm • Horizontal spindle speed: 40 - 1,350 rpm • Horizontal/vertical motor power: 2.2/1.5 kW • Dimensions: 1,920 x 1,850 x 2,200 mm • Weight: 1,900 kg Standard equipment: • Automatic tool screwdriver •Transmission • Horizontal spindle • Automatic feeds on the axles • Automatic spindle descent •Chiller � ...

NC Lathe Gildemeister Nef 500 BJ 1996

x-travel: 1.000 mm y-travel: 1.000 mm z-travel: 1.000 mm Control: SINUMERIK 840D pl spindle turning speed - stepless: U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 5-axis machining center with SIEMENS SINUMERIK 840D pl control, electron. handwheel, NC swivel rotary table Ø1,000mm, coolant through the spindle, chip conveyor, 180-fold tool-magazine HSK100, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Travel X/Y/Z: 560mm/500mm/400mm, speed: 5000rpm, table dimensions X/Y: 900mm/530mm, feed rate: 8m/min, rapid traverse: 10m/min, tool stations: 22, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3950mm/2650mm/2150mm, weight: approx. 3000kg, control: Heidenhain TNC 407/415, operating hours: 29647h. The central lubrication system shows issues. Documentation available. An on-site inspection is possible.

x-travel: 3.000 mm y-travel: 1.000 mm z-travel: 860 mm Control: Heidenhain iTNC-530 table-size: 3.600 x 1.050 mm T-slots: 7 x 18 T - slots distance: 125 mm distance table - lower edge spindle: 25-366 mm table weight: 4.200 Kg b-axis: +-105 ° c-axis: +-360 0 rapid travel x/y/z: 30.000 mm/min rotary table: Durchm. 1.000 mm max. turning diameter: 1.400 mm number of spindle speeds: 9.000 U/min/rpm tool taper: ISO-50 DIN 69871-AD spindle drive: 28,5 kW max. torque on the spindle: 240 Nm tool change unit: AITEK, 40 fach : 20 handwheel: Ink. Shuttle operation: Inkl Chip coveyor: Ink. Internal cooling system: 20 bar total power requirement: 65 kW weight of the machine ca.: 24,8 t dimensions of the machine ca.: 8.056 x 5.496 x 3.790 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm, 400 mm, 400 mm

FP 4M lid with 3-axis active digital display, Table clamping area 800 x 460 mm Travel X / Y / Z 500 / 400 / 400mm Spindle speed 50 - 2500 rpm Feed rate 8 - 630 mm/min Rapid traverse 1500 mm/min Quill stroke 90 mm  Tool holder SK 40 Hydraulic Tool Clamp Incl. accessories as shown

frequency: 50 Hz weight of the machine ca.: 2,510 t dimensions of the machine ca.: m 3-axis machining centre Microcut Challenger 2412 Technologies: Drilling / thread machining, form milling (3 D), milling, HSC milling without vice Table Size: 30 x 14.3 Max Table Load: 550 LBS X Axis: 24 Y Axis: 12 Z Axis: 20.47 Spindle Speed: 8,000 RPM Spindle Taper: 40 Spindle Motor: 5.5 HP ATC: 16 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4000 mm y-travel: 1000 mm z-travel: 1500 mm Control: Heidenhain 355 weight max.: 10 t head swivability: ° : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spindle speed range: 9000rpm, travel X/Y/Z: 500mm/400mm/400mm, feed rate: 10000mm/min, rapid traverse: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, distance between T-slots: 63mm. Control: Heidenhain, tool changer: 16-fold, dimensions X/Y/Z: 4000mm/2200mm/2450mm, weight: approx. 3500kg.

Two identical smoking and cooking systems are available. Suitable for the production and refinement of sausages and meat products, poultry, fish, cheese and baked goods, hot smoking, warm smoking, cold smoking, moist smoking, intensive smoking, quick smoking, reddening, sweating, scalding, steaming, cooking, hot air cooking, semi-preservation, baking, roasting and defrosting. Heating capacity: 24kW, connected load: 31.5kW. With operating manual. An on-site inspection is possible.

x-travel: 1000 mm y-travel: 360 mm z-travel: 400 mm spindle taper ISO: 40 ISO table:: 1370 x 300 mm feed:: 30-830 / 23-625 mm/min. turning speeds: 45 - 1660 U/min distance spindle /table: 60 - 460 mm rapid traverse: Z Achse 750 mm/min throat: 95 - 575 mm total power requirement: 3.0 kW weight of the machine ca.: 1505 kg range L-W-H: 1740 x 1860 x 1900 mm - Large rectangular guide in y and z axes - ensure increased stability - 8x automatic feeds and rapid traverse in all axes - driven by servo motor - Universal milling head system Huron, adjustable to all angular positions - Swiveling control panel with ergonomically placed switches - Heavy machine stand made of gray cast iron for vibration-free work - Very smooth running thanks to ground gears running in an oil bath - Upper arm with clearly structured gear box for the spindle speed - Digital position display for x, y and z axes included  ...

x-travel: 600 mm y-travel: 250 mm z-travel: 400 mm spindle taper ISO: 40 ISO table:: 1120 x 260 mm feed:: 24 - 402 mm/min. turning speeds: 45.0 - 1660 U/min distance spindle /table: 175 - 520 mm rapid traverse: Z Achse 660 mm/min throat: 0 - 550 mm total power requirement: 2.2 kW weight of the machine ca.: 1380 kg range L-W-H: 1570 x 1470 x 1660 mm Equipment: - Universal milling head, adjustable to all angle positions - Swiveling control panel with ergonomically positioned switches - Heavy machine stand made of gray cast iron for vibration-free work - Dovetail guide with adjustable wedge strips in all 3 axes - Very smooth running thanks to ground gear wheels running in an oil bath - Positioning motor for z-axis included in delivery - Automatic table feed in x and y axes as standard - Precisely surface-machined cross table with T-slots - Digital position display for x, y and z axes includ ...

Key data: 600 mm, 400 mm, 420 mm

Hermle UWF 900 Universal CNC Milling Machine BAZ Year of Make: 1996 Machine number: 11410 Machine weight: 2,900 kg Availability: By arrangement. Machine is still energized and in perfect condition.

Yamato 714 Multihead Weigher, Fully Stainless Steel | Rigidized | Optional RCU810A Upgrade | Deep-Freeze Ready, Looking for a high-performance weighing solution for frozen or hard products? This Yamato 714 is a fully stainless steel, rigidized multihead weigher built for demanding production environments., Its flat feed chutes make it ideal for deep-freeze and hard items, preventing sticking or jamming. Optionally, we offer versions with angled chutes for lighter products such as vegetables., The machine has been fully overhauled, thoroughly inspected, and is ready for immediate operation., ---------------------------------------------------------------, Specifications – Yamato 714, Weighing Heads - 14 heads, Weighing Range ~20 g up to 3,000 g (single dump); multi-dump possible, Speed - Up to 90 weighings per minute (product dependent), Chute Type - Flat chutes (ideal for frozen/ha ...


Universal tool milling machine TOS FNGJ 32 3 Axis Heidenhain Digital Display Year of Make: 1999 Travel: X 600 Y 400 Z 400 Speed range: 40 – 2000 rpm With the following accessories: Rigid angle table 800 x 400 mm clamping surface Vertical milling head Extendable drill quill Various tool holders SK 40 Safeguard Chip tray Machine Light Automatic central lubrication pump for X,Y,Z axis Coolant Setup 4 pcs machine shoes

x-travel: 450 mm y-travel: 200 mm z-travel: 465 mm total power requirement: 2,6 kW weight of the machine ca.: 1.2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Univ. Tool Milling Machine DECKEL Type FP 1 Masch. No. 37101 Year of construction approx. 1969 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal: 60-1200 rpm. 12 steps Motor power 1.0 and 1.5 kW pole-switchable Mains connection 380 volts, 50 Hz - Spindle speed over 2 motor speeds and 6 gear stages - Feed in the X and Z axes - Coolant device with mechanical pump in the machine foot - Quill shift on the vertical milling head 60 mm - Adjacent control cabinet Space requirements L x W x H 1000 x 900 x 1750 mm Weight 690 kg good condition Accessories: -Collets -Roundtable -Vice - Counter holder H. milling

gebr. Milling machine, Fabr. Stanko Type 6175 Travel X/Y/Z: 320/210/300 mm Spindle speed: 50 - 2040 rpm Feed speed: 13 - 395 mm/min Drive power: 1.5 kW Tool holder: 4 MK Groove width: 14 mm Number of grooves: 3 pieces Groove spacing: 50 mm

Key data: 530 mm, 450 mm, 450 mm

5-Axis CNC Machining Center Mikron UCP 600 Year of Make: 2004 Control: Heidenhain iTNC 530 x-travel: 530 mm y-travel: 450 mm z-travel: 450 mm Spindle: SK 40 Speed: 12,000 rpm Swivel table STP: Ø 400 mm Tool changer: 30 x Weight: approx. 6.5 t Switch-on hours: approx. 49,000 h Spindle hours: approx. 2,500 h

x-travel: 410 mm y-travel: 310 mm z-travel: 400 mm table-size: 700 x 280 mm control: Heidenhain TNC 145 tool adaptor: SK40 turning speed range: 40- 2.000 U/min rapid speed: 1,5 m/min feed speeds: 1500 mm/min power requirement: 2.2 kW quill stroke: 63 mm weight: 1,3 t total power requirement: 2,2 kW weight of the machine ca.: 1,5 t dimensions: 1,4 x 2,1 x 2,0 m Features: - New TFT screen - Coolant system - Hydraulic tool clamping - Milling head with spindle sleeve - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DMG MORI NLX2500/700 with tool drive and C-axis Universal lathe with 3-axis Turning length 700 mm Main spindle with integrated motor spindle ISM (rod diameter in mm) Hydr. Clamping devices, clamping cylinders, chucks C-axis with hydr. Spindle brake 10-speed BMT star revolver 10-speed tool drive NC tailstock CELOS with Mitsubishi control M730UM

Lathe CERUTI, distance between center 5m

Universal lathe GILDEMEISTER NEF 320 K With Siemens SINUMERIK 810 DE (SIMATIC PANEL TOUCH SCREEN) control Year of Make: 2003 Spindle bore: 52 mm Center width: 750 mm Circumference Ø over bed : 320 mm Circulation O over face slide: 150 mm Face travel : 185 mm Speed range: 14 – 3550 rpm infinitely variable With the following accessories: Slide protection with interior lighting Multifix tool holder with 2 inserts 3 jaw chuck SCHUNK ROTA plus 0 200 mm 2 set of soft top jaws Coolant Setup Chip rinsing gun 6 pcs. machine shoes Operating instructions The machine is in very good condition

x-travel: 850 mm y-travel: 700 mm z-travel: 500 mm Control: HEIDENHAIN iTNC 530 rotary table: 800 mm c-axis: 0.001º ( ±360º) 0 B-axis (table): +25 / -110 º mm number of spindle speeds: 18.000 U/min/rpm tool taper: SK 40 DIN 69871 spindle drive: 15 kW max. torque on the spindle: 130 Nm Tools changer: 38 fach/tools Internal cooling system: 80 bar handwheel: HR- 410 total power requirement: 41 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 mm, 500 mm, 530 mm

Like new: X-axis: 1,000 mm Y-axis: 500 mm Z-axis: 530 mm Table dimensions: 406 x 1,372 mm Spindle mount: BT 40 Spindle speeds: 1 - 8,000 rpm Control: Fagor Equipped with: - Coolant system -Operating instructions Country of origin: Taiwan Engine power: 10 hp Machine LxWxH: 2,900 x 2,280 x 2,550 mm Machine weight: 3,100 kg

Universal tool milling machine DECKEL FP 3 With 3 axes active digital display Heidenhain TNC 11 Year of Make: 1984 Travel: X 500 Y 300 Z 400 Speed range: 25 – 2500 rpm With the following accessories: Rigid angle table 850 mm x 400 mm clamping surface Swivel rotary table 0 450 mm with dividing discs Bumper Sliding vertical milling head Extendable drill quill Stepless feed via potentiometer Various milling mandrels SK 40 / S22 x 2 Chip tray Automatic lubrication pump for X,Y,Z axis Machine Light Coolant Setup 4 pcs machine shoes Operating instructions

A conventional universal milling machine H. Ernault Somua is available. Table dimensions X/Y: 1600mm/370mm, travel X/Y/Z: 1000mm/320mm/440mm, spindle taper: ISO50, speed: 2000rpm, power: 7.3kW. Machine dimensions X/Y/Z: approx. 2700mm/1700mm/1600mm, weight: approx. 2500kg. The NC display and coolant system are defective. The machine shows an offset of 0.4mm on the X-axis. An on-site inspection is possible.

x-travel: 400 mm y-travel: 400 mm z-travel: 300 mm rapid traverse: 1,2 m/min feed range: 5 - 500 mm/min creep feed: 1:100 tool taper: ISO 40 stroke: v60 h70 mm table - universal: ca. 620 x 320 mm table vertical adjustable: 350 mm weight of the machine ca.: 1200 kg dimensions: mm Machine was used in a public facility and is in good condition. Machine can be viewed under power by prior appointment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Travel X/Y/Z: 560mm/500mm/450mm, tool holder: SK40, speed: 4000rpm, feed rate: 3.6m/min, rapid traverse: 4m/min, table dimensions X/Y: 530mm/900mm, max. table load: 450kg. Machine dimensions X/Y/Z: 2350mm/2200mm/2000mm, weight: approx. 2200kg, control: Deckel Contour 2. An on-site inspection is possible.

Universal lathe, little used Model: SN 710S x 1500 Make TRENS SK Accessories: Digital Display 4 Jaws Face Plate Coolant tank

Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/490mm, tool holder: SK40, speed: 3150rpm, quill stroke: 100mm. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2100mm, weight: approx. 3300kg, control: Heidenhain 415, operating hours: approx. 64000h. Including coolant pump and an enclosed length measuring system LS403C. Documentation available. An on-site inspection is possible.

x-travel: 600 mm y-travel: 400 mm z-travel: 320 mm table-size: 900 x 420 mm control: konventionell tool adaptor: SK40 turning speed range: 35,5 - 1800 U/min quill stroke: ja mm total power requirement: 5,0 kW weight of the machine ca.: 1,45 t dimensions: 1,6 x 1,2 x 1,9 m Features: - Digital display - Coolant system - Milling head with quill The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 mm, 150 mm, 300 mm

Universal Milling Machine DECKEL FP1 Travel X: 300 mm Travel Y: 150 mm Travel Z: 300 mm Horizontal + vertical spindle Spindle speed: from 40 to 2000 RPM Horizontally tiltable head Spindle motor: 2 speeds Motor: 1,5 kW Feeds: X - Z auto / Y manual Supplied without table only with one 4 concentric jaws Ø 140 mm Voltage: 380 V Width: 1200 mm Depth: 1200 mm Total height: 1600 mm Weight: approx 900 KG

DECKEL MAHO DMU 60 monoBLOCK 5-axis machining center GENERAL Project No.: 905799 Quantity: 1 pcs. Manufacturer: DECKEL MAHO Type: DMU 60 monoBLOCK Control: Heidenhain Millplus iT Year of Make: 2008 Condition: Used machine Approx (hrs): 38596 Spindle in approx. (hrs): 200 Program run approx. (hrs.): 16181 DESCRIPTION MILL 5 axes Travel in X 730 mm Travel in Y 560 mm Travel in Z 560 mm Max. rapid traverse speed in X/Y/Z 30/30/30 m/min Tool holder HSK 63 Max. speed milling spindle 18000 1/min Milling head NC-controlled swivel -120/+30 degrees Chain tool magazine 60 stations Machine table 1000x600 mm Rotary table NC-controlled Diameter of rotary table 600 mm OTHER EQUIPMENT IR Workpiece Probes Splash protection cladding with partially clad work area Rotating viewing window Lighting in the work area Preparation for central oil/emulsion mist ...

gemotoriseerde X as Max longitudinal travel X-axe: 500 mm Max cross-travel Y-axe: 600 mm Max travel Z-axe: 600 mm Max height workpiece: 600 mm Power on spindle: 3 kW Table size: 900 x 250 mm

x-travel: 900 mm y-travel: 550 mm z-travel: 500 mm Control: FANUC 31i-b tool change unit: 30 pos. table-size: 1.000 x 500 mm table weight: 700 Kg spindle taper: HSK - A 63 number of spindle speeds: 20.000 U/min/rpm Spindle power: 22 Kw Working hours: 10.816 h Spindle hours: 2.352 h Internal cooling system: Distance between table and spindle: 150/690 mm chip conveyor: kW weight of the machine ca.: 9 t dimensions of the machine ca.: 2.530 x 2.900 x 3.064 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 590 mm z-travel: 480 mm Control: HEIDENHAIN ITNC 530 table weight: 265 Kg a-axis: ±110 ° c-axis: 360 ° rapid travel x/y/z: 32.000 mm/min feed: 15.000 m/min number of spindle speeds: 10.000 U/min/rpm spindle taper: BT - 40 spindle drive: 15/33 kW Torque: 192/189 Nm tool change unit: 32 pos. Working hours: 13.975 h Spindle hours: 6.258 h total power requirement: 30 kva weight of the machine ca.: 8,2 t dimensions of the machine ca.: 2.220 X 2.650 X 2.855 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lathe SARO SP 1250x3000, working condition

arm length: 1600 mm taper MK: 5 : Würfel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 mm, 450 mm, 600 mm

Universal Milling Machine ALCERA type 100 M Travel X: 1000 mm Travel Y: 450 mm Travel Z: 600 mm Cone SA40 Spindle speed: from 40 to 2000 RPM Table size: 1400 x 320 mm Year of construction: 11/1989 Scale 3 axes HEIDENHAIN Centralized grease pump Feeds: auto X - Y - Z Joystick command Lubricant pump Voltage: 380 V Width: 2100 mm Depth: 2400 mm Total height: 2000 mm Weight: approx 3 T

x-travel: 500 mm y-travel: 200 mm z-travel: 400 mm table surface area: 700 x 300 mm tool taper: SK 40 - S20 feed: 8 - 400 mm/ min rapid traverse: in X und Z 1200 mm / min turning speeds: 40 - 2000 U/min total power requirement: 2,2 kW weight of the machine ca.: 1400 kg dimensions of the machine ca.: 1500 x 1200 x 1600 mm Includes 2-axis digital display Heidenhain The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machining center Deckel Maho DMU200P - Very good condition - Available Immediately - Worldwide Export Year of Make: 2003 Condition very good Stock number 0732 Control Heidenhain iTNC530 Clamping area 1,700 mm x 1,400 mm Spindle speed 12,000 rpm Spindle holder SK50 Tool magazine 60 places Internal coolant supply (IKZ) and chip removal package 40 bar Conveyor. Probe Heidenhain TS642 electr. Handwheel Heidenhain Operating mode 4 High-speed attachment spindle 42,000 rpm Tool Measurement Blum Laser

Key data: 500 mm, 400 mm, 400 mm

DECKEL DMU 50T Heidenhain Control LE 412M Year of manufacture 2001 16-speed tool changer Working area 500 x 400 x 400 mm Feeds 5000 mm/min, rapid traverses 12000 m/min Direct displacement measuring system with rotary encoders (axes are displayed on the screen) Spindle speed max. 9000 rpm Rotary table B- and C-axis Coolant treatment El. Handwheel TFT Monitor Very good condition! If you have any questions, please feel free to contact Mr. Zölch directly: Tel. 0174-9119460 A viewing is possible by appointment. Second-hand goods are sold outside the warranty. Bought as seen. No returns.

Yamato 714 Multihead Weigher, Fully Stainless Steel | Rigidized |, Looking for a high-performance weighing solution for frozen or hard products? This Yamato 714 is a fully stainless steel, rigidized multihead weigher built for demanding production environments., Its flat feed chutes make it ideal for deep-freeze and hard items, preventing sticking or jamming. Optionally, we offer versions with angled chutes for lighter products such as vegetables or flat chutes for frozen products., The machine has been fully overhauled, thoroughly inspected, and is ready for immediate operation., ---------------------------------------------------------------, Specifications – Yamato 714, Weighing Heads - 14 heads, Weighing Range ~20 g up to 3,000 g (single dump); multi-dump possible, Speed - Up to 90 weighings per minute (product dependent), Chute Type - Flat chutes (ideal for frozen/hard product ...

A universal commercial dishwasher Hobart is available. Basket inner dimensions X/Y: 570mm/675mm, machine dimensions X/Y/Z: approx. 800mm/950mm/2050mm, weight: approx. 200kg. On-site inspection is possible.