We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,597 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
x-travel: 1600 mm y-travel: 700 mm z-travel: 850 mm control: Heidenhain TNC 407 taper ISO: 50 Table dimensions: 1950 x 650 mm spindle speeds: 80 - 3000 U7min voltage: 400 V total power requirement: 23 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm spindle taper ISO: 40 spindle turning speed range: 80 - 4000 U/min transmission ratio: 18 feed range: 0,1 - 2000 mm/min rapid traverse: x = 4 / y = 3 / z = 5 m/min table load capacity: 250 kp voltage: 380 V / 50 Hz spindle drive: 5,5 kW total power requirement: 16 kVA weight of the machine ca.: 2,6 t dimensions of the machine ca.: 3,8 x 4,3 x 2,0 m • CNC-control system 432 E • Operating hours: 37719 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
x-travel: 1000 mm y-travel: 300 mm z-travel: 400 mm table-size: 1320 x 360 mm spindle taper ISO: 40 spindle turning speed range: 58 - 1800 U/min total power requirement: 4 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,1 x 2,1 x 1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
x-travel: 300 mm y-travel: 200 mm z-travel: 350 mm table-size: 700 x 200 mm spindle taper ISO: 40 turning speed range - horizontal: 150 - 1660 U/min turning speed range - vertical: 110 - 1230 U/min quill stroke: 120 mm spindle drive: 3,0 kW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 1,31 x 1,38 x 1,65 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
x-travel: 1290 mm y-travel: 280 mm z-travel: 400 mm spindle taper ISO: 50 spindle turning speed range: 60 - 1750 U/min transmission ratio: 12 distance spindle /table: 0 - 400 mm table load: 450 kg table-size: 360 x 1320 mm feeds X-axis: 22 - 420 mm/U feeds Y-axis: 22 - 393 mm/U feeds Z-axis: 10 - 160 mm/U rapid traverse X-axis: 1290 mm/min rapid motion - y-axis: 1205 mm/min rapid traverse Z-axis: 1200 mm/min swivelling of milling head (both sides): 360 total power requirement: 8 kW weight of the machine ca.: 2220 t dimensions of the machine ca.: 3340 x 2460 x 1920 m Universal - Milling Head: HURON The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 4700 mm y-travel: 1000 mm z-travel: 1000 mm control: HEIDENHAIN TNC355 table-size: 5000x1000 mm T-slots: 7x mm turning speed range: 2800 U/min feed: 6-5000 mm/min rapid traverse: 15000 mm/min spindle motor: 30,00 kW spindle taper: SK 50 Table load: 10.000 kg Main drive: 40 PS weight of the machine ca.: 27,00 t dimensions of the machine ca.: m With HEIDENHAIN TNC 355 control. Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 600 mm y-travel: 500 mm z-travel: 500 mm total power requirement: 7,5 kW weight of the machine ca.: 5,5 t Working range: Longitudinal stroke X axis 600 mm Vertical stroke Y axis 500 mm Cross stroke Z axis 500 mm Clamping size of angle table 530 x 900 mm Max. weight of workpiece on table 450 kg Distance from table to vertical spindle, min./max. 120 / 620 mm Distance from table to horizontal spindle, min./max. 156 / 656 mm Tool taper SK 40 Spindle speeds 0 - 6,300 rpm Feeds X, Y and Z Axes, max. 2 - 10,000 mm/min Quick feed X, Y and Z Axes 10,000 mm/min Spindle drive 8 kW Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight, approx. 5,500 kg Accessories / Special Features DIALOG 11 CNC Control in 4 axes with all the usual options, cycles, and subprograms. Graphic display and electronic hand wheel. Vertical milling head can be pushed up manually so that the ...
used
x-travel: 710 mm y-travel: 500 mm z-travel: 500 mm total power requirement: 24 kW weight of the machine ca.: 7 t dimensions of the machine ca.: m M I K R O N (Switzerland) CNC Controlled Universal Milling Machine with Tool Changer Model WF 54 VH CNC Year 1991 Serial No. 5110302 ________________________________________________________ Table travel, X axis, longitudinal 710 mm Table travel, Z axis, vertical 500 mm Milling head travel, Y axis, cross 500 mm Mounting height below vertical spindle, approx. 600 mm NC rotary table 800 mm Resolution of rotary table, C axis 0.001 ° Spindle taper SK 40 Spindle speeds, 3 steps, infinitely variable 10 - 6,300 rpm Feeds, XYZ 2 - 4,000 mm/min Quickfeed, XY 10,000 mm/min Quickfeed, Z 8,000 mm/min Spindle drive, approx. 15 kW Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 7,000 kg Accessories / Special Feat ...
used
x-travel: 600 mm y-travel: 400 mm z-travel: 500 mm total power requirement: 1,5 kW weight of the machine ca.: 1800 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 3500 mm y-travel: 1000 mm z-travel: 1300 mm Control: Heidenhain type: TNC 155 surface area: 3700x1120 mm power capacity: 26 kW transmission ratio: 2 turning speeds: 40-2000 U/min spindle taper ISO: 50 Feed: 3000 mm/min Rapid movement: 8000 mm/min total power requirement: 40 kW weight of the machine ca.: 21 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 1000 mm y-travel: 500 mm z-travel: 650 mm tool taper: SK 40 quill stroke: 100 mm turning speed range - power take off spindle: 40-2000 U/min Feed: 5-2000 mm/min Rapid movement: 4000 mm/min Control: Heidenhain total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 2000 mm y-travel: 900 mm z-travel: 1000 mm Control: Heidenhain type: TNC 155 surface area: 2200x960 mm turning speeds: 20-1700 U/min Tool bore: SK 50 type: DIN 69871 mm rapid traverse: 10 m/min total power requirement: kW weight of the machine ca.: 16 t dimensions of the machine ca.: 7x4,2x2,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 1170 mm y-travel: 500 mm z-travel: 370 mm table load: 2 t spindle turning speed range: 25 - 2500 U/min feeds: 4 - 2000 mm/min rapid traverse:: 4000 mm/min taper ISO: 40 total power requirement: 12,5 KVA weight of the machine ca.: 4 t dimensions of the machine ca.: 2,3 x 1,9 x 1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 700 mm y-travel: 550 mm z-travel: 500 mm spindle taper ISO: 40 control: Heidenhain type: TNC 155 milling-head swivable +/-: boring spindle: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Machine Details Warehouse number 1105-03373 Machine type Konsolfräsmaschine - universal VERNIER brand Type VS 3 Year of construction 1985 Conventional control type Storage location FRANCE Country of origin France Delivery time immediately Freight base from stock Technical details x-displacement 900 mm y-way 300 mm z-way 600 mm Table: 1200 x 300 mm Number of T-slots 3 Number of feeds 18 Feed range 14 - 710 mm/min Rapid path vertical 1 m/min Rapid path longitudinally 3 m/min Speed 45 - 2000 rpm Total power requirement 4 kW Machine weight approx. 2.4 t Information can be folded down to horizontal milling machines with rotatable and swivelling vertical head, Feeds in all 3 axes, DIGITAL DISPLAY DEVICE rapid passages,
used
Lacfer CR2-E250 rebuilt lathe. Distance between centers: 1.500mm. Swing: 530mm. Swing over carriage: 320mm. Swing in gap: 740mm. 16 speeds. (18-1.600rpm). Main motor power: 10hp. Spindle bore: 60mm. Equipped with universal chuck. Equipped with steady rest. CE certificate for european used machines.
new
- 3-cheek lining - 4-cheek lining - fixed bezel - running bezel - 3-axis position display Sino SDS6-3V - Multifix Type E incl. 4 holders - Splash guard - Oil pan - Lighting system - Foot spindle brake - Coolant sealing - Steel stand with 3 drawers and cabinet door - Reduction sleeve - Spare gears Technical data: - Circulating Ø over bed: 360 mm - Circulation Ø over slide: 212 mm Ø without bridge: 490 mm - Center width: 1000 mm - Bed width: 187 mm - Spindle bore: 51 mm - Metric threads: 0.2 - 5 mm (28 steps) - Inch thread: 8 - 112 tpi (36 steps) - Module thread: 0.2 - 3 mm (22 steps) - Thread with diametrical slope: 8 - 112 dp (36 steps) - Longitudinal feed: 0.050 - 0.696 MM (36 steps) - Transverse feed: 0.013 - 0.188 mm (36 steps) - Tailstock Pinoleenaufnahme: MK3 - Tailstock Pinoleenhub: 100 mm - Motor power: 1.5 kW - Dimensions WxHxD: 1925 x 1510 x 75 ...
used
Type: DMU 60T Max longitudinal travel X-axe: 630 mm Max cross-travel Y-axe: 560 mm Max travel Z-axe: 560 mm Power on spindle: 40 kW Admission in millinghead: SK40 Spindlespeeds: 20 > 12 000 rpm Table size: 1000 x 600 mm Control: Heidenhain Length: 2800 mm Depth : 3490 mm Height: 2220 mm Weight: 7 ton
used
Deckel Maho DMU50e DMU 50 Evolution Max longitudinal travel X-axe: 500 mm Max cross-travel Y-axe: 420 mm Max travel Z-axe: 380 mm Power on spindle: 25/35 kW Type of millinghead: SK 40 Spindlespeeds: 20 > 18 000 rpm Table size: Ø 500 x 380 mm Control: Heidenhain Power needed: 38 kVa Length: 4000 mm Depth : 2500 mm Height: 2700 mm Weight: 5 ton Toolholder: yes Number of tools: 32 tools
new
- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Flat disc ø 430 mm - Lighting system - Coolant sealing Specification - Tip width: 2000 mm - Circulating Ø over bed: 600 mm - Circulation Ø over slide: 360 mm - Circulating Ø in eruption: 730 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/U (66 steps) - Transverse feed: 0.036 - 2.019 mm/U (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock ...
used
Parallel lathe NILES DLZ 400 IV Between points: 1000 mm Maxi Ø on bench: 420 mm Maxi Ø over saddle: 225 mm Spindle diameter: Ø 52 mm Spindle speed: from 45 to 2240 RPM 3-jaws chuck Ø 250 mm (interchangeable jaws) Threadings: Metric + Whitworth Tailstock: CM5 Rapid on X Lubricant pump Voltage: 380 V Length: 3000 mm Depth: 1500 mm Total height: 1600 mm Weight: approx 2,5 T
used
KNUTH MF5V Universal Milling Machine YOM 2005 Germany X-travel 800 mm Y-travel 390 mm Z-travel 380 mm Spindle taper ISO SK 40 Speed 70 - 3600 rpm Quill feed 3 steps- 0,04/ 0,08/ 0,15 mm/r Quill travel 127 mm Distance spindle nose- table min./max. 50 / 456 mm Distance spindle center to column min./max. 57 / 603 mm Table dimensions 1370 x 250 mm Table load 350 kg Total power requirement 3,75 kW Machine weight approx. 1590 kg dimension machine approx.LxWxH 2,1 x 3,1 x 2,3 m Accessories: Vices, 3 tool holders
used
Control: Dialog 11 with new MCP card Travel range: x-800 y-600 z-550 mm Spindle speeds: 18 – 6300 rpm Pinole by hand: 80 mm Recording: SK 40 Feed: 2 to 10000 mm/min Rapid response: 10000 mm/min Weight: approx. 4050 kg With full cab, chip conveyor, electr. Handwheel Installation dimensions: L: With controller and chip conveyor approx. 4200 mm (without conveyor approx. 3200 mm) B: approx. 3800 mm (With space to open door E-cabinet approx. 4600 mm) H: approx. 2400 mm Can be visited under electricity.
used
The machine is in good condition and can be inspected under power by appointment. Specifications: X: 500 mm Y: 300 mm Z: 380 mm Milling spindle by hand: 100 mm 18 spindle speeds: 40 - 2000 rpm 18 feeds X, Y, Z: 10 - 500 mm/min Rapid response: 1500 mm/min Clamping surface angle table horizontal: 700 x 320 mm Motor: 3 kW, 1420 rpm Dimensions approx.: 1500 x 1500 x 1800 mm Weight: approx. 1.5 t
used
The FU 251 universal milling machine was built in 1983. The machine is equipped with a table with dimensions (L x W) 1120 x 250 mm. The mechanical feeds of the working table in the X / Y / Z axis are respectively 765/230/390 mm, and manual feeds are 785/250/410 mm. The milling machine has three T-slots with a spacing of 14 mm and a steady rest. The total weight of the machine is 2 tons. Technical data of the universal milling machine FU 251 - working dimensions of the table (length x width): 1120x250 mm - mechanical table feeds in the X / Y / Z axis: 765/230/390 mm - manual table feeds in the X / Y / Z axis: 785/250/410 mm - accelerated longitudinal and transverse feed: 2500 mm / min - accelerated vertical feed: 1040 mm / min - longitudinal and transverse feed speed range: 12.5-630 mm / min, - vertical feed speed range: 5.2-262 mm / min - speed range of the longitudinal and ...
used
DMG Deckel Maho DMU 60T X: 630 - Y: 560 - Z: 560 mm Max longitudinal travel X-axe: 630 mm Max cross-travel Y-axe: 560 mm Max travel Z-axe: 560 mm Power on spindle: 10/15 kW Admission in millinghead: SK 40 Spindlespeeds: 20 > 12 000 rpm Table size: 1000 x 600 mm Control: Heidenhain Length: 2800 mm Depth : 3490 mm Height: 2220 mm Weight: 7 ton Toolholder: yes Number of tools: 24 tools
used
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0
used
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0
used
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Distance from vertical spindle to table: 50 mm Machine´s weight about: 50 kg Overall dimensions machine: Length: 500 mm Width: 400 mm Height: 400 mm
new
- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Face disc - Lighting system - Coolant sealing Specification - Center width: 1000 mm - Circulating Ø over bed: 500 mm - Circulation Ø over slide: 325 mm - Orbital Ø in eruption: 630 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/rev (66 steps) - Transverse feed: 0.036 - 2.019 mm/rev (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock pinole ...
used
x-travel: 800 mm y-travel: 300 mm z-travel: 400 mm tool taper: SK 40 fixed table: 400 x 1000 mm addition table: 260 x 1000 mm turning speed range: 40 - 2000 U/min feed range: 10 - 500 mm/min total power requirement: 3 kW weight of the machine ca.: 2000 kg dimensions of the machine ca.: 1775/1880/1850 mm • fixed angle table, • 3-axis-digital display ACU-RITE • 5 tool tapers, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Manufacturer: SHW Machine Tools Type: UF 21 / UF 31 Routes X,Y, Z: 1000, 700,625mm Control: -Machine 1: Heidenhain TNC 355 -Machine 2: Heidenhain TNC 415 Table: NC rotary table 1100x840mm Automatic swivel head Pinole 120mm Milling spindle holder SK 50 Speed 2500rpm Since we offer several machines from this series, the advertised images are exclusively sample images of comparable machines. Feel free to provide us with your individual (control, table size, tilt & tilt Setup, etc.) Inquiry so that we can offer you a machine that meets your requirements. MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare pa ...
used
Manufacturer: SHW Machine Tools Type: UF 41 Routes X,Y, Z: 1000, 700,750mm Control: Heidenhain TNC 415 Table: NC rotary table 1100x840mm Automatic swivel head Pinole 120mm Milling spindle holder SK 50 Speed 2500rpm Since we offer several machines from this series, the advertised images are exclusively sample images of comparable machines. Feel free to provide us with your individual (control, table size, tilt & tilt Setup, etc.) Inquiry so that we can offer you a machine that meets your requirements. MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Oaith Performances: - Used machines - Spare parts - Customer service - Machine service - ...
used
Machine Details Warehouse number 1105-03525 Machine type tool milling machine - Universal SIA brand Type 470 Year of construction 2001 Control type CNC Control ANILAM 53000MK Storage location FRANCE Country of origin italy Delivery time immediately Freight base from location Technical details x-travel 750 mm y-travel 450 mm z-travel 500 mm Control ANILAM 53000MK Speed range - spindle 4500 rpm Drive power - Milling spindle 7.5 kW Feed - Fine adjustment 5 ~ 1000 mm/min Rapid traverse X-axis 15 m/min Rapid traverse Z-axis 15 m/min Rapid traverse Y-axis 20 m/min Total power requirement 20 kW Machine weight approx. 3 t Space requirement approx. 3.2 x 2.1 x 2.5 m Accessories Coolant device Information Tool milling machine - Universal WITH ANILAM 5300 MK CNC WITH NEIHGBARER HEAD TABLE 1050 X 500 MM
used
Key data: 800 , 600 , 550
Manufacturer: Lid Type: FP 5 CC Year of construction: approx. 1986 Table: 1500 x 675 mm Longitudinal path: (X,Y,Z axis) 1200x600x500mm Tool changer: no Tool holder: SK 40 Vertical spindle speeds: 20-6300rpm Feeds: 2-5000mm/min Connection: 50 Hz 3x 380V Spindle motor: 7.5KW Machine weight: approx. 8200kg Dimensions: 3300x2400x2400mm
used
Table length: 750 mm Table width: 460 mm Longitudinal X: 400 mm Cross Y: 400 mm Vertical Z: 500 mm CNC Brand: _Unknown / Other CNC Model: Dialog 11
used
Table length: 1250 mm Table width: 250 mm Longitudinal X: 800 mm Cross Y: 370 mm Vertical Z: 470 mm MAKE TOS Kurim TYPE FNK 25 A YEAR 1998 SPECIFICATIONS X - Travel 800 mm Y - Travel 370 mm Z - Travel 470 mm Table Length x Width 1250 x 250 mm Table load in kG 500 Kg Spindle Taper ISO 40 kW power on spindle 3 kW Spindle speeds / ranges 4500 Rpm DIMENSIONS Length 2300 mm Width 1600 mm Height 2300 mm
used
Table length: 1372 mm Table width: 254 mm Longitudinal X: 1050 mm Cross Y: 390 mm Vertical Z: 355 mm MAKE EURO - MILL TYPE 4 VA YEAR 2001 SPECIFICATIONS X - Travel 1050 mm Y - Travel 390 mm Z - Travel 355 mm Table Length x Width 1372 x 254 mm Table load in kG 500 Kg Spindle Taper ISO 40 kW power on spindle 4 kW Spindle speeds / ranges 4200 Rpm DIMENSIONS Length 2400 mm Width 2400 mm Height 2400 mm
used
Table length: 1500 mm Table width: 460 mm Longitudinal X: 1300 mm Cross Y: 700 mm Vertical Z: 550 mm MACH-id 3625 MAKE Huron France TYPE NU 5 YEAR 1970 SPECIFICATIONS X - Travel 1300 mm Y - Travel 700 mm Z - Travel 550 mm Table Length x Width 1500 x 460 mm Spindle Taper Iso 50 kW power on spindle 10 kW Spindle speeds / ranges 2060 Rpm Huron milling machine for sale
used
Table length: 1065 mm Table width: 230 mm Longitudinal X: 760 mm Cross Y: 305 mm Vertical Z: 405 mm SPECIFICATIONS X - Travel 760 mm Y - Travel 305 mm Z - Travel 405 mm bed / plano / portal / moving column Uniniversal milling Controll Conventionel with Positip 850 Table Length x Width 1065 x 230 mm Table load in kG 200 Kg Spindle Taper R8 with collet Spindle speeds / ranges 4600 Rpm
used
Table length: 800 mm Table width: 400 mm Longitudinal X: 500 mm Cross Y: 400 mm Vertical Z: 400 mm Make Deckel FP4M Type FP 4 M Year 1984 Conventionel high quality milling machine Table length (mm)L = 800 Table width (mm)W = 400 Longitudinal X (mm)X = 500 Cross Y (mm)Y = 400 Vertical Z (mm)Z = 400 Sk40 / 80 / 2500 Rpm SONY 3 axis droLittle used
used
Table length: 1230 mm Table width: 410 mm Longitudinal X: 700 mm Cross Y: 315 mm Vertical Z: 540 mm CNC Brand: Heidenhain CNC Model: TNC 426 Make Fehlmann 82Type82 CNC HF Year 1998 Heidenhain TNC 426 Table length (mm) X = 700 Table width (mm) Y = 315 Longitudinal X (mm) Z = 540 Cross Y (mm) Hsk 50 / 30.000 Vertical Z (mm) Table 1230 x 410 Rapid = 15.000 mm Large tooling 4e axis with tilting !
used
Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm Make EMCO F B 5 Type FB 5 Year 1998 Universal milling machine active digital Table length (mm) L = 800 Table width (mm)W = 400 Longitudinal X (mm)X = 600 Cross Y (mm) Y = 400 Vertical Z (mm) Z = 400 Sk40/3150/7.5Swivable head 90 Gr.Feeds all directions
used
Table length: 800 mm Table width: 500 mm Longitudinal X: 600 mm Cross Y: 500 mm Vertical Z: 500 mm CNC Brand: _Unknown / Other CNC Model: Dialog 11 Make Deckel FP4 CC Type FP 4 CC Year 1988 Dialog 11 Table length (mm)L = 800 Table width (mm)W = 500 Longitudinal X (mm)X = 600 Cross Y (mm)Y = 500 Vertical Z (mm)Z = 500 Sk40 / 80 / 6300 Rpm High class machine !
used
Table length: 900 mm Table width: 500 mm Longitudinal X: 700 mm Cross Y: 500 mm Vertical Z: 500 mm CNC Brand: Heidenhain CNC Model: ND 550 Make Intos FNGJ 5 Type FNGJ 50 Year 1998 HeidenHain ND 550 Table length (mm)L = 900 Table width (mm)W = 500 Longitudinal X (mm)X = 700 Cross Y (mm)Y = 500 Vertical Z (mm)Z = 500 BT40 / 3150 / 7.5 kW Head with Pinole Very little hours
used
Table length: 800 mm Table width: 400 mm Longitudinal X: 500 mm Cross Y: 400 mm Vertical Z: 400 mm Make Deckel FP4M Type FP 4 M Year 1987 Aktive digitaal Table length (mm)L = 800 Table width (mm)W = 400 Longitudinal X (mm)X = 500 Cross Y (mm)Y = 400 Vertical Z (mm)Z = 400 Sk 40 / 2500 Rpm 3 Axis HeidenHain
used
Table length: 1400 mm Table width: 300 mm Longitudinal X: 900 mm Cross Y: 350 mm Vertical Z: 500 mm Make CME FU 2 MU Type FU 2 Universal Year 1992 Universal horizontal and vertical milling machine Table length (mm)L = 1.400 Table width (mm)W = 300 Longitudinal X (mm)X = 900 Cross Y (mm)Y = 350 Vertical Z (mm)Z = 500 Horizontal & Vertical Feeds in 3 axis Huron type milling head
used
Table length: 6000 mm Table width: 1500 mm Longitudinal X: 5000 mm Cross Y: 1250 mm Vertical Z: 1050 mm CNC Brand: Heidenhain CNC Model: TNC 415 Floor Type Milling machine Make Soraluce 5 Type FS 5000 Year 1992 Soraluce fs 5000 TNC 415 in 5 Axis Table length (mm) L = 6.000 Table width (mm)W = 1.500 Longitudinal X (mm)X = 5.000 Cross Y (mm)Y = 1.250 Vertical Z (mm)Z = 1.050 Index Orthogonal 3 Gr.Iso 50 / 30 kW / 100 % Chip conveyor 7000 mm
used
tags for table feed box
used
aschinella details Warehouse number 1105-03375 Machine type Milling machine - Universal CmE brand Type FC 1100 Year of construction 1991 Control type NC Storage location FRANCE Country of origin spain Delivery time immediately Freight base from stock Technical details x-travel 1100 mm y-travel 700 mm z-travel 500 mm Receiving cone of the main spindle 40 SK Motor power 10.6 kW Table clamping surface 1400 x 450 mm Speed 40 - 1800 rpm Dimensions L-W-H 2.4 x 2.15 x 2.1 mm Machine weight approx., 3800 kg Information Equipment: - Heidenhain - Control model TNC 124 - Universal milling head "Huron" design - 2 counter holders for horizontal milling - autom. Tool clamping - Lighting - Central lubrication