universal cnc milling used for sale

Haco ERMS 220 ton x 3100 mm CNC Capacity: 220 ton x 3100 mm Backgauge: CNC Passage between uprights: 2600 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Locking speed: 100 mm/sec Working speed: 8 mm/sec Returning speed: 100 mm/sec Electric motor (power): 18,7 kW Length: 3320 mm Depth: 2050 mm Height: 2800 mm Weight: 11,6 ton

Technical data Type: TBA-60 Year of manufacture: 2005 Machine type: CNC multi-slide automatic lathe Control: CNC (Fanuc-based control) Working range Max. round bar capacity: 60 mm Max. turning length: 100 mm Spindle Spindle power: 7.5 kW Max. spindle speed: up to 3,150 rpm Tool system Servo-driven 6-station star turret Turret change time: approx. 0.3–0.4 s Multi-slide concept with: Front horizontal slide (X1/Z1) Rear horizontal slide (X2) Two vertical slides (X3/X4) () Travel distances Horizontal slide travel distance: 45 mm Vertical slide travel distance: 45 mm Machine data Machine weight: 2,000 kg Equipment Single bar feed Multi-carriage turning system for high productivity Coolant device Chip disposal / chip tray The machine can be viewed under power by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Year of manufacture: 1997 Control system: similar to Fanuc Technical specifications Max. bar diameter: 36 mm Standard bar capacity: 26 mm Max. turning length: 100 mm Swivel diameter over cross slide: 120 mm Main spindle Speed range: 100 – 6,300 rpm (continuously variable) Spindle power: 7.5 kW / 11 kW (continuous/peak) Spindle nose: A2-5 C-axis: resolution 0.001° Number of slides: 4 linear slides (X/Z) for simultaneous machining 8-station star turret (VDI 20) Rapid traverse speeds: 15 m/min (X-axis) / 20 m/min (Z-axis) Feed force: 2,500 N Single bar feed: ERGOMAT, for bar lengths up to 3,000 mm. The machine can be viewed in operation by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Key data: 242 t

This is a 242 Ton x 12ft and deep 16" throat depth with 5 axis machine with auto crowning, a good variety of dies and punches including 2 bolsters and a nice 4way. Segment acute punches and dies also available with this machine. It is clean and fully operational. Machine is wired 208 3 phase.

pressure: 28.0 t chamfer lenght: 1050 mm distance between columns: 890 mm throat: 200 mm stroke: 200 mm dayligth: 325 mm back stop - adjustable: 500 mm working feed: 8.0 - 10.0 mm/sec return speed: 35.0 mm/sec back stop - adjustable: 0 - 370 mm Control: CYBELEC total power requirement: 4.75 KW weight: 3250 kg range L-W-H: 1595 x 1390 x 2020 mm Very good / well-maintained condition () new price in 2012 ... approx. 36.000 Euro special price on request The machine was in continuous use in a test area and as a result has only very few operating hours ! - in checked conditions - machinevideo - https://www.youtube.com/watch?v=2LsTlpSaEuE Equipment: - CNC electro-hydraulic press brake - CNC control CYBELEC ModEva 15PAC Large 15 touch display Workpiece creation simply by hand in 2D thanks to the TouchProfile function Intuitive and interactive programming Clearly arranged keyboard Clear  ...

Offered is an automatic fitting drilling machine. Workpiece size L: 100-1350mm, W: 100-600mm, d: 16-25mm, operating pressure: 6-7bar, extraction air speed: 30m/s, extraction volume flow: 70m³/min, working height: 1000mm, traverse speed X-axis: 60m/min, traverse speed Y-axis: 50m/min, control system: Ferrocontrol CNC. Equipped with vibratory feeder for hinges, spiral vibratory feeder for buffers, drilling and insertion units, light barrier monitoring. Weight: approx. 6000kg, overall dimensions X/Y/Z: approx. 5500mm/2200mm/2400mm. Inspection possible by arrangement.

Offered is a CNC-controlled drilling and insertion machine. Workpiece size max.: 1350mm x 600mm x 25mm, operating pressure: 6-7bar, extraction speed: 32m/s, working height: 1000mm, control system: Ferrocontrol. Equipped with two-station machine for alternating loading, feed system for workpieces, vibratory feeder with sound-insulating hood for hinges, drilling and insertion unit, control cabinet, extraction collector. Weight: approx. 6000kg, overall dimensions X/Y/Z: approx. 6240mm/4500mm/2200mm. Inspection possible by arrangement.

Offer 26148 Technical data: - Pressure capacity 420 KN / 42 t - Stroke length 0 - 300 mm - Lifting speed 0 - 0.6 m/min - Tool height 200 mm - Bending performance - with prism MW 125 flat approx. 200 x 16 mm - with prism MW 240 flat approx. 200 x 24 mm - Tube bending up to 2 inches - CNC control SIEMENS SIMATIC HMI TOUCH - For angle programming + length programming - Controlled length stop 3000 mm - Various bending tools - Operating hours (read) 1404 h - Drive 400 V / 4.0 kW - Space requirement approx. W 850 x H 1250 x D 1250 mm - Weight approx. 1200 kg

Inv. Num. : 9163 Type: MAH 40/3 CNC Producer: AMOB Created: 2022 Parameters: Diameter of the cylinders: 148 mm Length: 1200 mm Width: 770 mm Height: 1450 mm Weight: 540 kg Hydraulically controlled upper roller feed Can be used vertically and horizontally 3 mechanically driven rollers Side rollers (manually adjustable) Adjustable control pedal 3 standard rollers

cutting diameter: 300 mm saw band length: 3660 x 27 x 0.9 mm capacity 90 degrees: flat: 320 x 290 mm capacity 45 degrees: round: 290 mm capacity 45 degrees: flat: 260 x 280 mm capacity 60 degrees: round: 200 mm capacity 60 degrees: flat: 180 x 170 mm coolant capacity: ca. 100 l Control: SPS total power requirement: 2.4 kW AC weight: 904 kg range L-W-H: 2410 x 1920 x 2020 mm in good conditions Original price approx. 22.000 euros Special price on request Features: - Robust electro-hydraulic miter band saw, fully automatic (INDUSTRIAL) Fully automatic with automatic material feed Material feed unit with recirculating ball screws - Includes PLC MITSUBISHI control unit 20 programs, each with 15 cutting lengths + number of pieces programmable - For angles from 0° to 60°, with ball-bearing rotary table Mitre cuts up to 45° possible in automatic mode Mitre cuts up to 60° possible in  ...

grinding diameter: 630 mm grinding length: 3000 mm centre height: 315 mm grinding wheel size: 750 x 100 x 305 mm grinding wheel width: 150 taper: MK 6 chuck diameter: 315 mm grinding head swivelling: 90 Grad grinding spindle head - swivable: 30 ° table - swivable: 4,30 - 6,30 Grad grinding spindle speed: 815 / 935 U/min spindle speeds: 8 - 57 / 28 - 150 mm grinding sp.stock-cross tvl. frwd/rear/total: 420 mm grinding head quick motion: 80 mm table speed -stepless-: 0,05 - 4,5 m/min workpiece weight: 1200 kg grinding spindle drive: 22 kW Control: Siemens 840D total power requirement: 56 kVA weight of the machine ca.: 13 t dimensions of the machine ca.: 9900×2980×1875 mm The machine is suitable for grinding cylindrical and conical workpieces using longitudinal and plunge grinding methods. The table movement, the feed movement of the grinding headstock, and the tailstock quill return are ...

3 assen: Y1 / Y2 / X Amada bombering Capacity: 100 ton x 3100 mm Backgauge: CNC Control: EMA Passage between uprights: 2600 mm Max stroke: 105 mm Max distance between table -- ram: 370 mm Depth of throat: 400 mm Table width: 90 mm Locking speed: 85 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 10 kW Length: 3640 mm Depth: 2210 mm Height: 2340 mm Weight: 6,5 ton

Reinecker Universal Tool Grinding Machine WZS-50 CNC Precision Grinding Machine Profile Grinding Machine Hersteller [manufacturer]: Reinecker Type [ type]: WZS-50 CNC Control unit: Siemens Sinumerik 880G Baujahr[construction year]: 10/1992 Incl. extinguishing system Incl. various accessories Travel axis: X – Y – Z – C – E Interface Type: E32R Weight [weight]: 3000kg Approx. (L x D x H): 3m x 3m x 3m Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - upon receipt of invoice Prior sale, errors excepted. We ask for your order. Other machines and systems available from stock – please inquire. We look forward to seeing you. Phon ...

Key data: 1 t

Type : Thread rolling machine Manufacturer : Thommen – Made in Switzerland Model : PR17-CNC/AC Year of construction : 1999 BOSCH Control unit The system was first owned. The machine brings an error message/malfunction in the display. Mechanically, optically, everything is very good. The machine comes from the first owner, from a German company. Phone 017621834834

Key data: 1 t

Type : Thread rolling machine Manufacturer : Thommen – Made in Switzerland Model : PR17-CNC/AC Year of construction : 1999 BOSCH Control unit The system was first owned. The machine brings an error message/malfunction in the display. Mechanically, optically, everything is very good. The machine comes from the first owner, from a German company. Phone 017621834834

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 52185/08 Year of construction 1968Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 250 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.4 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Two motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- Coolant device in the machine foot- Adjacent control cabinet- Counter holder

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 51265/08 Year of construction approx. 1967Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 2100 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.6 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Spindle speed over 2 motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- adjacent control cabinetSpace requirement L x W x H 1100 x

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 28317 Year of construction approx. 1960Travel distances X: 245 mm Y: 150 mm Z: 340 mmTable size 600 x 210 mmSpindle holder horizontal MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 0.8 and 1.1 kW pole-switchableMains connection 380 volts, 50 Hz spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with mechanical pump in the machine base

Manufacturer Heckler & Koch Model AM 444 A Power consumption: 5.5 KW Voltage: 380/400 Volts Spindle holders for vertical and horizontal spindles: 40 Slide movement x = 410nn y = 350mm z = 400mm Vertical clamping table 850 x 255 mm Feed range 0-1500 mm/min Sliding gearbox 12-stage Speed: 63-2800 rpm Step jump 1.4 CNC control CNC 783/m Dimensions (HxWxD) 1.800x2.400x1.700mm Weight 1,500 kg Ref.Nr PLW18 Mistakes reserved!

5-axis controlled milling centre Control: E 160 CNC Work piece clamping: 2 axis cradle type with tool-taper clamping Indexing of work piece cradle (A/B) full rotary and tilting controlled Traverses: X 1050 mm Y 420 mm Z 420 mm Spindle motor rating: 9 kW Spindle speeds to: 4000 rpm Gear steps 2 Torque: 450 Nm Pick up magazine tool positions: 15 with 2 places for extra large tools Tool taper: ISO 40 Equipped with: 2 Axis clamping system for parts, taper ISO 50; Vertical milling head ISO 40; Full guarding; Pick up magazine for 15 tools; VERY LITTLE USAGE AND ONLY WITH CUTTING OILS; Excellent

Bearing number 1105-02690 Machine type Milling machine - Universal Make HERMLE Type UWF 1000 Built in 1988 Control type CNC Storage location FRANCE Country of origin Germany Delivery time SOFORT Freight base EXW Technical details x-way 700 mm y-way 630 mm z-way 500 mm Control heidenhain 355 Tool holder SK 40 (DIN 69871) Table clamping area: 1000 x 490 mm Spindle speed Gear stage 1 25 - 400 rpm. Spindle speed Gear stage 2 401 - 1260 rpm Spindle speed Gear stage 3 1261 - 4200 rpm Feed 5 m/min Rapid speed 10 m/min Swivel of the milling head + / - 90 ° Pinole diameter 110 mm Pinole stroke 95 mm Total power requirement 18 kW Machine weight approx. 5 t Information with full cabin coolant device Sale takes place without clamping equipment approx. 8500h switch-on hours

Code 4946 DESCRIPTION CNC Milling machine Make ABENE Model VHF – 3 TNC Serial No. 30038 Year 1984 Control Heidenhain TNC 150 B Table 1200 x 320 mm Longitude ( X – axis ) table 670 mm Vertical ( Y – axis ) table 450 mm Cross ( Z – axis ) table 250 mm Spindle gap 250 mm Spindle taper 40 ISO Speeds in 12 ranges 44 - 2000 rpm Feeds X-Y-Z 1 - 3000 mm/min Rapides 3,0 – 1,5 m/min Spindle motor 4,5 kW - 380 Volts Weight of machine 1600 kgs Accessories Univ. millinghead 3 x DRO Heidenhain Coolant, etc. Condition Machine is in very good condition

Wanderer ISO 40

Control: Dialog 11 with new MCP card Travel range: x-800 y-600 z-550 mm Spindle speeds: 18 – 6300 rpm Pinole by hand: 80 mm Recording: SK 40 Feed: 2 to 10000 mm/min Rapid response: 10000 mm/min Weight: approx. 4050 kg With full cab, chip conveyor, electr. Handwheel Installation dimensions: L: With controller and chip conveyor approx. 4200 mm (without conveyor approx. 3200 mm) B: approx. 3800 mm (With space to open door E-cabinet approx. 4600 mm) H: approx. 2400 mm Can be visited under electricity.

Machine Details Warehouse number 1105-03525 Machine type tool milling machine - Universal SIA brand Type 470 Year of construction 2001 Control type CNC Control ANILAM 53000MK Storage location FRANCE Country of origin italy Delivery time immediately Freight base from location Technical details x-travel 750 mm y-travel 450 mm z-travel 500 mm Control ANILAM 53000MK Speed range - spindle 4500 rpm Drive power - Milling spindle 7.5 kW Feed - Fine adjustment 5 ~ 1000 mm/min Rapid traverse X-axis 15 m/min Rapid traverse Z-axis 15 m/min Rapid traverse Y-axis 20 m/min Total power requirement 20 kW Machine weight approx. 3 t Space requirement approx. 3.2 x 2.1 x 2.5 m Accessories Coolant device Information Tool milling machine - Universal WITH ANILAM 5300 MK CNC WITH NEIHGBARER HEAD TABLE 1050 X 500 MM

Machine Details Warehouse number 1105-03692 Machine type Milling machine - Universal HERMLE brand Type fp 1000 Year of construction 1988 Control type CNC Control heidenhain 355 Storage location HAGUENAU Country of origin Germany Delivery time IMMEDIATELY Freight base EXW Technical details x-travel 700 mm y-travel 630 mm z-travel 500 mm Control heidenhain 355 Tool holder SK 40 (DIN 69871) Table clamping surface: 1000 x 490 mm Spindle speed gear stage 1 25 - 400 1/min. Spindle speed gear stage 2 401 - 1260 1/min. Spindle speed gear stage 3 1261 - 4200 1/min. Feed 5 m/min Rapid traverse 10 m/min Swivel of the milling head + / - 90 ° Pinole diameter 110 mm Pinole stroke 95 mm Total power requirement 18 kW Machine weight approx. 5 t Information with coolant device Sale without clamping devices

CNC-Universal milling machine MAHO MH700 C Table: 900 x 500 mm Travels: -X: 700 mm -Y: 500 mm -Z: 450 mm Spindle stroke: 100 mm Spindle taper: ISO 40 Spindle speed range: 20 - 3150 rpm Total power need: 40 kva Control: Maho / Philips CNC 432 Machine weight: 3,3 tn

Inv. Num. : 6905 Type: UNI 1000 Producer: Reckermann Created: 1993 Parameters: Control system: Heidenhain TNC 135 Working table length: 1500 mm Working table width: 400 mm Minimum vertical spindle speed: 40 1/min Maximum vertical spindle speed: 2000 1/min X-axis travel: 900 mm Y-axis travel: 350 mm Z-axis travel: 400 mm Spindle power: 7.5 kW Total power requirement: 14.5 kW Machine height: 2200 mm Machine length: 2200 mm Machine width: 2300 mm Machine weight: 3800 kg Equipment: Central lubrication Lighting Technical Documentation

Dialog 11 Control Speed range 40 - 4000 rpm Rapid traverse 4 m/ min Tool holder SK 40 Feed rate 2 - 3600 mm /min, infinitely variable Connected load approx. 10 kVA Travel X/Y/Z 300 / 300 /400 mm Working spindle vertically and horizontally Extendable quill 80 mm Milling head swivel +/- 90° Accessories: coolant device, electr. Handwheel Cabin with protective device ( When opening of the cabin door stops the milling spindle ). Very good original condition! The axes and milling spindle run quietly and precisely. Geometry in X/Y/Z axis 0.015/0.01/0.015 mm Spindle concentricity to 300 mm/0.012 mm Price: 8500,- EUR excl. VAT free loaded from warehouse Tirschenreuth

Key data: 630 mm, 560 mm, 560 mm

Year of construction 2003 Heidenhain control MC 422 18200 Spindle hours NC rotary table installed in rigid table 1000 x 600 mm Controlled B-axis 24-fold tool changer Workspace Tool holder SK40 Motor spindle 12000 rpm Incl. coolant system, chip conveyor (auger) Top condition! Machine weight 6500 kg Transport dimensions: 3.5 x 2.7 x 2.21 m

Key data: 500 mm, 250 mm, 260 mm

quill stroke 480 mm , table 800x320 , max. 300 kg , SF 32 , 100-9.000 rpm , 5kW , 60 Nm , Heidenhain TNC 124 ,

WE OFFER AN EXCELLENT STAMA , JUST PERFECT CONDITION WITH TOOLS STAMA TECHNICAL DETAILS MACHINE DATA Machine type: Machining center Manufacturer: Stama Model: MC 526 Compact Machine number: KMM 526 1508 Year of construction: 2005 Condition: used Functionality: fully functional TECHNICAL DETAILS Travel distance X-axis: 1,000 mm Travel distance Y-axis: 400 mm Travel distance Z-axis: 360 mm Rapid traverse X-axis: 45 mm/min Rapid traverse Y-axis: 45 mm/min Rapid traverse Z-axis: 45 mm/min Feed rate X-axis: 10,000 mm/min Feed rate Y-axis: 10,000 mm/min Feed rate Z-axis: 10,000 mm/min Torque: 60 Nm DESCRIPTION TECHNICAL DETAILS Travel x: 1000 mm Travel y: 400 mm Travel z: 360 mm Control: Fanuc 18i-MB5 Projection: 350 mm Work ...

Key data: 1000 mm, 750 mm, 750 mm

Travel X/Y/Z: 1000/750/750 mm Tool changer: ISO 40, 30 places Spindle speed: 12000 rpm Control: Heidenhain TNC 426 Machine is still under power... If you have any questions, just call or write.

Year of manufacture 2001 Heidenhain TNC 310 Travel distances 350 x 240 x 340 Spindle speed 20 - 5000 Drive power 6.3/10 KW Total connected load 15 kW Tool holder SK40 Accessories: el. Handwheel Universal swivel rotary table 400 x 280 mm, Rotation range 360°, swivel range +105/-15° with electronic angle display Coolant Setup

Key data: 600 mm, 525 mm, 500 mm

Tool Milling Machine - Universal DECKEL-MAHO DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial.no.063 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled

Key data: 710 mm, 520 mm, 520 mm

TECHNICAL DETAILS X-axis travel:710 mm Y-axis travel:520 mm Z-axis travel:520 mm Rapid traverse X-axis:30 m/min Y-axis rapid traverse:30 m/min Rapid traverse Z-axis:30 m/min X-axis feed speed:10 m/min Y-axis feed speed:10 m/min Z-axis feed speed:10 m/min Overall height:3,300 mm Overall length:4,600 mm Overall width:5,500 mm Total weight:6,000 kg Spindle speed (min.):20 rpm Spindle speed (max.):12,000 rpm Spindle motor power:25,000 W Input voltage:400 V Type of input current:three-phase Work table length:700 mm Worktable width:500 mm

Key data: 1200 mm, 600 mm, 500 mm

Dialog 11 Control Travels 1200 x 600 x 500 Max. spindle speeds 5000/rpm Spindle drive 12 kW Tool holder SK40 Quill stroke 80 mm, weight approx. 7000 kg. Accessories el. Handwheel, coolant device. The machine is in very good condition.

Key data: 600 mm, 450 mm, 400 mm

x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm Table size: 850 x 440 mm Spindle holder: SK 40 Control: HEIDENHAIN TNC 355 Spindle speeds: 20 - 4000 rpm Spindle motor: 5.9 kW Quill stroke: 80 mm Feeds - longitudinal/transverse/vertical: 1 - 2000 mm/min Feed force x/y/z: 7200 N Rapid traverse longitudinal and transverse: 10 m/min Rapid traverse vertical: 10 m/min Total power requirement: 12 kW Machine weight approx.: 2.5 t Dimensions L x W x H: 2.7 x 2.5 x 2.0 m Handwheel, coolant device

Tos FA5AV X: 1400 - Y:420 - Z: 400mm Max longitudinal travel X-axe: 1400 mm Max cross-travel Y-axe: 420 mm Max travel Z-axe: 400 mm Admission in millinghead: ISO 50 Table size: 1600 x 400 mm Power needed: 20.5 kW Weight: 5300 kg

Holke F-10-V X: 815 - Y: 400 - Z: 420 mm Max longitudinal travel X-axe: 815 mm Max cross-travel Y-axe: 400 mm Max travel Z-axe: 420 mm Power on spindle: 2 HP Admission in millinghead: ISO 40 Max quill travel Z´: 130 mm Spindlespeeds: 57 > 2275 rpm Table size: 1120 x 255 mm Weight: 1300 kg

kop kan draaien: 90° (R amp; L) / 45° (F amp; B) 360° bovenarm draaibaar spindelhartlijn tot kolomoppervlak: 71 gt; 476 mm Max longitudinal travel X-axe: 750 mm Max cross-travel Y-axe: 305 mm Max travel Z-axe: 406 mm Max height workpiece: 70 > 476 mm Power on spindle: 2 HP Admission in boring head (ISO): ISO 30 Spindlespeeds: 3750 rpm Length: 1435 mm Depth : 1600 mm Height: 2100 mm Weight: 1 ton

A CNC universal tool milling and drilling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, quill stroke: 95mm, spindle power: 12kW, spindle speed: 4200rpm, spindle swivel: +/-75°, tool holder: SK40, clamping force: 12kN, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4400mm/4250mm/2300mm, weight: approx. 4500kg, control: Heidenhain TNC 425. Documentation available. An on-site inspection is possible.

x-travel 500 mm y-travel 400 mm z-travel 400 mm Control TNC Heidenhain Speed range - main spindle 20 - 9,000 rpm/-1 Drive power - main spindle 9 / 13 kW Table diameter 700 x 500 mm swivel B: 105° (-10°/+95°) man. rotatable 360° man. max. table load 200 kg Number of T-slots 7 Centering bore 30H7 mm Number of tool locations 16 pos. Tool holder ISO 40 DIN 69871 max. tool length 290 mm max. tool weight 6.0 kg max. total weight 50 kg Feed speed max. 10,000 mm/min Total power requirement 17 kW Machine weight approx. 3.2 t Space requirements approx. 4.0 x 4.0 x 2.5 m

Travel X/Y/Z: 560mm/500mm/400mm, speed: 5000rpm, table dimensions X/Y: 900mm/530mm, feed rate: 8m/min, rapid traverse: 10m/min, tool stations: 22, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3950mm/2650mm/2150mm, weight: approx. 3000kg, control: Heidenhain TNC 407/415, operating hours: 29647h. The central lubrication system shows issues. Documentation available. An on-site inspection is possible.