univer used for sale

Attention: Before purchasing a used universal tester / tractor, consider the old, used machine (all?) need new electronics for WIN 10. No manufacturer / Microsoft provides support for WIN XP / 7 – an expensive impasse! Purchase, pickup, software update (if possible?), commissioning, modernization are more expensive than a new galDABINI machine Quasar 600 kN incl. load cell 600 kN, Latest technology (BECKHOFF Elektronik) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable, using finite elements FEM, 2-line universal test era Optional load cells N: 10 | 20 | 50 | 100 | 250 | 500 or kN 1 | 2.5 | 5 | 10 | 25 | 50 | 100 | 200 | 250 for tests on steel, reinforced steel, plastic, rubber, foils, textiles, wire, sheet metal, components, assemblies and many more. Very well Made in Italy | Europe, German + European Q ...

Table surface: 300 x 1300 mm Table movement x: 950 mm Table movement y: 220 mm Table movement z: 400 mm Spindle intake: MK 5 Spindle speeds: 25-1200 rpm Prests lengthwise & across: 7.5-635 mm/min Presens vertical: 3-250 mm/min Electr. Connection: 380 V, 7.5 kW Space requirement: 1670 x 1500 x 1750 mm Weight: 2600 kg

Stephan UMHC403E-GNi Pilot Universal Machine with control cabinet Double jacket Steam injection nozzles Knife insert Lid with pressure-resistant closure Feeder containers Steam transfer station Outlet on the boiler electrically driven stirring blade 3 Speeds Machine tiltable Safety device on the lid not functional, machine runs with the lid open Sight glass of the flow meter at the rear of the control cabinet defective Machine should be repainted and overhauled Voltage 400V Fuse: 32A Machine must in any case be thoroughly cleaned before use Video about test run and further pictures available

Table clamping area: 310 x 1400 mm Table movement x: 950 mm Table movement y: approx. 325/345 mm Table movement z: approx. 500 mm Spindle speeds: 20 - 1500 rpm Feeds longitudinally and transversely: 18 - 620 mm/min Feeds vertical: 18 - 620 mm/min electr. Connection: 380 V kW Space requirement: 1900 x 1600 x 1750 mm Weight: approx. 1500 kg

MAHO MH-700 with numeric control X, Y Table size: 800x300 Working area: X-450,Y-250,Z-300 Spindle taper: MK3 Feed range: 7-250mm/min Vertical head swiveling 90 degreess Power: 3KW Dimensions: 1300x1200x1700

Table clamping area: 560 x 240 mm x-way: 300 mm y-way: 275 mm z-way: 200 mm Spindle holder: ISO 40 Spindle speeds: 40 - 2000 rpm Operating voltage: 380 V Total power requirement: 1.5 kW Space requirement: 1200 x 1100 x 1700 mm Weight: approx. 750 kg

Machine is equipped wit h HEIDENHEIN DIGITALS 2 TURNING HEADS TURNING LENGHT 1800mm HOLE TROUGH SPINDLE 76mm WITH LINETS AND ACCESORRIESS, READY TO WORK. BEFORE LOADING MACHINE WILL BE CLEANED FOR THE CUSTOMER.

Carrot processing machines for black carrots etc. till storage bunkers Pos. 1.42 /max. 20 t/h / 2017 Carrot unloading station Pos. 2.43 Dry soil remover Pos. 3.44 Weed and gras remover Pos. 4.45 Cyclone stone separator Pos. 5.46 Water bath with conveyor to Pos. 6.47 Pos. 6.47 Washing machine with conveyor to Pos. 7.48 Pos. 7.48 Sorting conveyor belt with rejection conveyor belt for rejected vegetables Pos. 8.50 Conveyors with scales till Pos. 9.51 Pos. 9.51 2 x storage bunker, capacity: 2 x 25 tons, (with conveyors to Pos. 52) Further machines for the production of carrot juice concentrate are available used, sold as it is, where it is, price ex location

Ger RHC1500 Universal Rectifier. Indoor head. Distance between points: 1500mm. Maximum part diameter: 355mm. Point height: 180mm. Tooth diameter: 400mm. Power: 7.5hp. Weight: 4500Kgs.

NFM L200IV 200L universal mixer Model L200IV Cutter / Mixer / Homogenizer is following the footsteps of our experience in the industrial food processing equipment for producers of consumer products worldwide. Integrating our patents and knowledge; we created a machine with industrial capacity and durability with the ease of use of a counter-top appliance. The L200IV allows our customers to increase process capacity without increasing labour needs. Only one person is enough to operate this machine regardless of body-power. The tilting of the bowl and opening-closing of the cover is fully motorized and works automatically. The machine is operated via a hybrid control panel, offering water-proof metal buttons and a control screen. The timer, the variable speed function, the optional reverse revolving function, the cover and tilting mechanism controls are all integrated into this panel. The ...

Universal milling machine vertically / horizontally from a training workshop Manufacturer Hermle Type FW801 Tool holder SK40 automatic feed in three axes Digital display in three axes Machine technically in very good condition under electricity ready for demonstration Technical data: Travel: x=350mm y=150mm z=220mm Spindle speeds from 50 to 3,150 rpm can be infinitely variable Feed speed infinitely adjustable via rotary pot from 10 to 5,000 mm/min, aisle Special price Used milling machine Hermle FW 801

Table clamping area: 190 x 710 mm Table movement x: 390/360 mm Table movement y: 150 mm Table movement z: 280 mm Spindle holder: SK 40 Spindle speeds: 100 - 3100 rpm Feeds longitudinal 0 - 600 mm/min electr. Connection: 380 V, approx. 1.5 kW Space requirement: 1400 x 1200 x 1500 mm Weight: approx. 680 kg

For the production of snap folds and Pittsburgh folds, we supply folding forming machines, which produce a folded workpiece from a wide variety of sheet metal materials using a rollforming process from a flat sheet metal strip. Frm Rolling machine for the production of snaplock folds (snap folds) and S- or L-shaped folds up to 32 mm output length – as well as Pittsburgh folds with 13 mm folding height, Material thicknesses that can be rolled-reshaped - steel + aluminium 0.6 mm to 1 mm - stainless steel 0.6 to 0.7 mm, forming stations 9 pieces - throughflow speed 15 m/min, e-instances per meter 20 pieces - punch ingesrant distance 50 mm, dimensions approx. 2.3 x 0.7 m x H 1.1 m, drive power 3 kW, weight 450 kg

New drive shafts for Vertical and Universal Fraeshead FU 400 - FW 400 HECKERT Germany Price 900,-- Euro per square plus VAT

Force 6- 45 kN Working height 300-490 mm Projection 100-195 mm as good as new. Condition Accessories - Buttons Embossing Unit with Numbers Applications: for stamping, embossing, numbering, straightening, riveting, punching, etc. Function: By pressing down the hand lever after placing the tool on the workpiece, the special strike spring is tensioned and released. The impact impact is transferred to the workpiece and is infinitely adjustable. Advantages: Infinitely adjustable impact force High impact performance with little effort Tolerance compensation (for different workpiece heights, the same impact force is always achieved) Pneumatic drive can be retrofitted Universal spring impact presses

Technical data: Turning diameter over bed: 520 mm Turning diameter via support: 310 mm Turning length: 1000 mm Circulation diameter in recess: 580 mm Peak height: 250 mm Bed width: 410 mm Spindle bore: 62 mm Spindle flange: Camlock Gr. 8 Spindle speeds: 24: 9 - 1800 rpm Machine weight approx.: 2.75 t Space requirements approx.: 2.8 x 1.3 x 1.3 m Electrics 380 Volt: 32A Three-jaw lining: 315 mm Forkart Coolant device Measuring system: Glasstab 0.005mm resolution on all 3 axes Quick-release steel holder " Multifix ": C

Perfect, used short time. Lead Screw and Feed Shaft Lathe 3-axis position indicator Workpiece length (max.) 1.928 mm Turning diameter over bed 560 mm Turning-Ø over support 355 mm Turning diameter over gap bridge 785 mm Gap bridge length 170 mm Bed width 350 mm Travel X-axis 316 mm Travel Z1-axis 130 mm Swing range of top slide ± 52° Spindle speeds L 25-200 / H 200-1600 1/min Spindle bore 80 mm Spindle mount Camlock D1-8 Spindle taper MT 7 Feed X-axis 0,02 - 0,573 mm/R Feed Z-axis 0,059 - 1,646 mm/R Tapping, metric (47) 0,2 - 14 mm Tapping, diametric (50) 4-112 DP Tapping, module (39) 0,1 - 7 mm Tapping, whithworth (60) 2-112 TPI Tailstock quill diameter 75 mm Tailstock taper MT 5 Tailstock quill stroke 180 mm Tailstock traverse adjustment ± 12 mm Motor rating main drive 7,5 kW Overall dimensions 3,34x1,15x1,46 m Weight 2.720 kg 3-jaw chuck Ø 315 mm 4- ...

Universal punch pots usM 900; good condition; cleaned and tested; 2x punching head; Table size 900x600mm; Max. Insert height 80mm. Universal punch potions USM 900; good condition; cleaned and checked; two heads; table size 900x600mm; max.pile hight 80mm.

Correa F3UE universal milling machine. Table: 1400mmx340mm. Longitudinal travel: 1100mm. Cross travel: 320mm. Vertical travel: 500mm. ISO50. Hure head. Speeds: 18. (28-1400)

Year of manufacture: 2013 CNC Controller: FAGOR 8055TCO Capacity Distance between centers (mm): 3000 Height between centers (mm): 300 Height between centers from the ground (mm): 1200 Grinding diameter (mm): ø 595 Max. workpiece weight between centers (kg): 2000 Max. Workpiece weight with tool (kg): 200 Table (Z-axis) Maximum travel (mm): 3350 Rotating table plate ±5° Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Grinding carriage (X-axis) Maximum travel (mm): 500 Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Resolution (mm): 0.0005° Grinding head Left grinding wheel diameter (mm): 600 Peripheral speed (m/s): 45 Workpiece head Spindle speed (rpm): 9 ÷ 250 CM taper: 5 Spindle type: 8" Tailstock Type: Manual handwheel Spindle taper (cm): 6 Maximum spindle travel (mm): 60 Quill diameter (mm):  ...

Code 4946 DESCRIPTION CNC Milling machine Make ABENE Model VHF – 3 TNC Serial No. 30038 Year 1984 Control Heidenhain TNC 150 B Table 1200 x 320 mm Longitude ( X – axis ) table 670 mm Vertical ( Y – axis ) table 450 mm Cross ( Z – axis ) table 250 mm Spindle gap 250 mm Spindle taper 40 ISO Speeds in 12 ranges 44 - 2000 rpm Feeds X-Y-Z 1 - 3000 mm/min Rapides 3,0 – 1,5 m/min Spindle motor 4,5 kW - 380 Volts Weight of machine 1600 kgs Accessories Univ. millinghead 3 x DRO Heidenhain Coolant, etc. Condition Machine is in very good condition

Code 61044 Description Toolroom millingmachine Make MACMON Type M 100 E Serial no. 1176 Year 1984 Table size 600 x 215 mm Longitude traverse table (X) 310 mm Cross traverse millinghead (Y) 170 mm Vertical traverse milling head (Z) 340 mm Spindle taper 40 ISO 16 Spindle speeds: H / V 40 - 2000 rpm 16 Feeds: longitude and vertical 9 - 450 mm/min Spindle motor 1,3 and 1,8 kW - 380 Volts Dimension L x W x H 1,1 x 1,1 x 1,4 meter Weight 750 kg Accessories Universal millinghead with quill of 70 mm Coolant Condition Machine is in good condition

grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Foto von Kürzlich gelieferten  ...

grinding diameter: 350 mm grinding length: mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Basis: Kellenberger Kel-Varia UR175-1000 Schleifkopf UR mit T1-T2-T3 Grundausstattung: -T1 500mm Schleifscheibendurchmesser -T2 400mm Schleifscheibendurchmesser -B-Achse hochauflösend -Marposs Messeinrichtung zur Werkzeugvermessung -Werkzeugvermessung -Aktive Längspositionierung -GAP an T1 berührungslos -Reitstock mit Handrückzug -Werkstückspindelstock MK5 mit Kurzkegelaufmahme DIN 55026 -Innenschleifeinrichtung riemengetrieben Optionen gegen Aufpreis: - neuer Werkstückspinde ...

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±8 ° longitudinal feed of the table: 700 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannung kg cross travel: max. 270 mm : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 5,48 x 2,0 m Foto von bereits gelieferten Maschine (600mm Spitzenweite) mit gegebenenfalls anderen Optionen. Geometrisch überholt und neu lackiert. -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Dre ...

grinding diameter: 250,350,450 mm grinding length: 1500 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ± 6 ° longitudinal feed of the table: 1750 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 80 mm total power requirement: 6,5 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 5,6 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Geometrisch überholt und ne ...

Pressure measuring device, flow measuring device, measuring and control technology, measuring device -imc: universal measuring device µ-MUSYCS -Voltage: 110 - 230 V AC/DC -Dimensions: 330/345/H145 mm -Weight: 6.4 kg

Ball bearings, bearings, bearing set, accurate, radial ball bearings, roller bearings -Type: 71944CTP2HUL -Lubricating groove -Bore: Ø 220 mm -Outer diameter: 300 mm -Width: 75 mm -Number: 4x bearings available -Price: per piece -Weight: 14 kg

x-travel: 500 mm y-travel: 500 mm z-travel: 350 mm table surface area: 800 x 450 mm spindle taper: ISO: 40 quill stroke: mm feed - longitudinal/cross: mm/min feeds vertical: mm/min turning speed range: max. 3150 U/min voltage: 380 V / 50 Hz power capacity: 4 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,5 x 2,3 x 2,0 m • HEIDENHAIN TNC 155 - control, • with electrical hand wheel, • several tool tapers, • new set of bevel gears, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 99999 mm grinding length: 99999 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m We offer the overhauling of your Kellenberger U-machine. Mail serial number and foto of the machine and you will get an offer. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Geometrically overhauled with ...

Universal screwdrivers, construction screwdrivers, screwdrivers, electronic screwdrivers, power screwdrivers, electric screwdrivers -Nominal consumption: 400 watts -Max. Screw capacity: 10 mm -Connection: 220 volts -Price: per piece -Number: 11 pieces -Dimensions: 420/140/H80 mm -Weight: 4 kg/piece

Switchgear, control system, UV light, automatic burner control -Honeywell: 7800 Series Base Layer Panel -Price: per piece -Number: 8 pieces -Dimensions: 145/150/H70 mm -Weight: 0.3 kg

Universal milling angle head, milling angle head -Recording: MK4 -Drive mount: MK5 -Angle head: swiveling -Dimensions: 440/300/H310 mm -Weight: 68 kg

grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m Overhauled with geometric KELLENBERGER protocoll -2-axis DRO -Paper filtration Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erford ...

grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Geometrisch überholt und neu la ...

Universal clamping pad -Execution: Toothed like a staircase. For use in pairs. Individual pads can be used in conjunction with clamps. -Support height: 72 to 240 mm. -Material: Heat-treated steel, painted. -Scope of delivery: 3 sets of different sizes -Weight: 6.2 kg

Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, accessories -Execution: -interlocking in a stair-like pattern -for use in pairs -individual documents can be used in conjunction with clamping iron no. 372000 -Support height: 30 to 200 mm -Heated steel: painted -Weight: 6 kg

Universal milling head, milling chuck, milling extension, angle milling head -Spare part from an R

Soap dispenser, universal dispenser, disinfection dispenser -Content: 500 ml -Price: per piece -Number: 13x available -Dimensions: 80/150/H300 mm -Weight: 1.2 kg

x-travel: 800 mm y-travel: 450 mm z-travel: 400 mm table surface area: 1385 x 305 mm spindle taper: SK 40 quill stroke: 200 mm spindle turning speed range: 50 - 3500 U/min control: HEIDENHAIN control: TNC 155 total power requirement: 5,8 kW weight of the machine ca.: 2,5 t dimensions: 2,25 x 2,0 x 2,4 m Accessories: electron. handwheeel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cardan shaft, cardan shaft, universal joint -Cardan shaft: universal joint, unused -Type / order no .: 21001375 402027/201 7610AVA10 -Shaft: Ø 36 mm -Measurements: see photos -Number: 15x universal joint available -Price per piece -Dimensions: 120/62 / H56 mm -Weight: 1.1 kg / pc.

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm spindle taper ISO: 40 spindle turning speed range: 80 - 4000 U/min transmission ratio: 18 feed range: 0,1 - 2000 mm/min rapid traverse: x = 4 / y = 3 / z = 5 m/min table load capacity: 250 kp voltage: 380 V / 50 Hz spindle drive: 5,5 kW total power requirement: 16 kVA weight of the machine ca.: 2,6 t dimensions of the machine ca.: 3,8 x 4,3 x 2,0 m • CNC-control system 432 E • Operating hours: 37719 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mm y-travel: 300 mm z-travel: 400 mm table-size: 1320 x 360 mm spindle taper ISO: 40 spindle turning speed range: 58 - 1800 U/min total power requirement: 4 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,1 x 2,1 x 1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm Control: Heidenhain TNC 430 total power requirement: 26 kW weight of the machine ca.: 6500 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- 3-cheek lining - 4-cheek lining - fixed bezel - running bezel - 3-axis position display Sino SDS6-3V - Multifix Type E incl. 4 holders - Splash guard - Oil pan - Lighting system - Foot spindle brake - Coolant sealing - Steel stand with 3 drawers and cabinet door - Reduction sleeve - Spare gears Technical data: - Circulating Ø over bed: 360 mm - Circulation Ø over slide: 212 mm Ø without bridge: 490 mm - Center width: 1000 mm - Bed width: 187 mm - Spindle bore: 51 mm - Metric threads: 0.2 - 5 mm (28 steps) - Inch thread: 8 - 112 tpi (36 steps) - Module thread: 0.2 - 3 mm (22 steps) - Thread with diametrical slope: 8 - 112 dp (36 steps) - Longitudinal feed: 0.050 - 0.696 MM (36 steps) - Transverse feed: 0.013 - 0.188 mm (36 steps) - Tailstock Pinoleenaufnahme: MK3 - Tailstock Pinoleenhub: 100 mm - Motor power: 1.5 kW - Dimensions WxHxD: 1925 x 1510 x 75 ...

Lacfer CR2-E250 rebuilt lathe. Distance between centers: 1.500mm. Swing: 530mm. Swing over carriage: 320mm. Swing in gap: 740mm. 16 speeds. (18-1.600rpm). Main motor power: 10hp. Spindle bore: 60mm. Equipped with universal chuck. Equipped with steady rest. CE certificate for european used machines.

- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Flat disc ø 430 mm - Lighting system - Coolant sealing Specification - Tip width: 2000 mm - Circulating Ø over bed: 600 mm - Circulation Ø over slide: 360 mm - Circulating Ø in eruption: 730 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/U (66 steps) - Transverse feed: 0.036 - 2.019 mm/U (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock ...

Control: Dialog 11 with new MCP card Travel range: x-800 y-600 z-550 mm Spindle speeds: 18 – 6300 rpm Pinole by hand: 80 mm Recording: SK 40 Feed: 2 to 10000 mm/min Rapid response: 10000 mm/min Weight: approx. 4050 kg With full cab, chip conveyor, electr. Handwheel Installation dimensions: L: With controller and chip conveyor approx. 4200 mm (without conveyor approx. 3200 mm) B: approx. 3800 mm (With space to open door E-cabinet approx. 4600 mm) H: approx. 2400 mm Can be visited under electricity.