units used for sale

1 post PILZ safety relays, a total of 46 units, consisting of: 1.Pilz PNOZ1 (for emergency stop and protection doors), ID 475695: 5 piece 2.Pilz PNOZ (for emergency stop and protection doors), tag 474695: 5 piece 3.Pilz PNOZ 5(NOT-AUS-Schaltgerät), tag 474590: 1 piece 4.Pilz PNOZ 8 (for emergency stop and protection doors), tag 474760: 1 piece 5.Pilz PNOZ X 2.1 (for emergency stop and protection doors), tag 774306: 1 piece 6.PILZ PNOZ X 2 (for emergency stop and protection doors), tag 774303: 1 piece 7.Pilz PZE 9 (contact expander module), tag 774150: 5 piece 8.Pilz PZE X4P (contact expander module), ID 777585: 1 piece 9.Pilz t & a 5V (guard door monitoring), tag 474965: 1 piece 10.Pilz PNOZ X 7 (for emergency stop), tag 774059: 1 piece 11.PILZ PNOZ X8P, tag 777760: 5 pieces, (for emergency stop, safety doors and light barriers) 12.Pilz PNOZ X3P, ident 777310:  ...

Qty. 1 Second-hand ingot caster plantMfc.:Sistem TeknikBuilt:1/2015Stopped in 4/2015Recycling capacity:5000 Ton/annumQty. 12 Units of Pyrotek moldsDim. of aluminium ingot: 1000 x 1000 x 500 mmWeight:500 kgCharging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc.Scope of supply:Aluminium shredderMagnetic separator Aluminium de-coating machine Baler Aluminium gas furnace Aluminium casting system Gas generator Mass ARUN spectrometer Air compressor, conveyors, forklift, ect.Shredder and magnetic separation conveyorMfc.:YSSType:Mono shaft shredder J600Capacity:500 kg per hour high power electrical shredding machineMono shaft shredder stylePLC automatic control unit Siemens?Hydraulic unit for material pushing to shredding wheelCurrent control for shredder reverse †safe usageShredded aluminium pass onto conveyor unitMagnetic separation system for steel removalElec ...

The color shading in hardware consisting of automatic Auricolor SO tinting machine, large quantities of pasta to administer two LV-Dosing units, PC-based control unit, as well as equipment for intersections between lines. Shading equipment is made in accordance with the standards EN 50014 and EN 50016 and meets the explosion classification Eex p II T3. (The device is equipped with a fan, supply and exhaust pipes and pressure sensor to achieve a permanent vacuum supply to the pipe and well-ventilated.) 1 pack of Tinting Station LV-S18519 -contains 10 pieces 20-liter and 10 liter stainless steel tanks for 15 -the pump return 0.8 litres/min -Automatic nozzle shut-off -ohjauchoiceroniikka SA801, SA903 and SA704 2 x LV-Dosing units with frame structure -tank capacity 150 litres -pasta HL4625, 0.37 kW pump VIKING – approx. 5 l/min, Eex rated -Blade mixer helical motor, inverter ...

4-color R21046/16 EDELMANN continuous stationery press model: Varioprint age: 1994 web width: 52 cm 4 printing units reel – to - reel slide-in: 4 x 16 2/3 4 x 12 3 x 16 unwinder/ rewinder: 120 cm revolving slide-in in all 4 printing units SCHOBER double tool BST colour monitor Available: nach Absprache

Built-in screwdriver with control, BL57/50 MDW, 457010, Pico/mA, DSM, used Top Attention special price! (For your info - current new price for this screwdriver and control € 9.500 excl. VAT) We have set the lowest price on the market for a comparable used part. We still have several identical and other such units, but the quantity is ending. If you buy more than 1 piece you will get a great discount. If you have a UID number we will gladly issue an invoice without VAT. Used - Top condition The part was bought from a company in the course of a machine dismantling and is in very good condition. Technical data: Screwdriver BL57/50 MDW, DSM 457010, max. 50Nm, incl. all cable sets. This high quality DSM screwdriver is designed for direct measurement of torque and angle of rotation. The high-precision transducers required for this are installed directly on the output. The meas ...

SystemTM short length stacking machines for timber length 400 mm up to max. 1.200 mm. Almost new machines. There are also sweepere units available for the stacking units.

full functional 2-colour /2 component injection molding machine K75-S 2F in L-Format Year 1996 Internationale Size 750H 200/100 L working hours: 32750 h controller: IQT 6 (german Text) clamping unit (extende tie bars +200mm) clamping force: 750 kN/ 75 tons distanc. tie bars: 420 x 420 mm platens dist. max: 850 mm (max) tool height: 400 mm (min) platens size: 605 x 605 mm ejector force: 34 kN ejector stroke: 150 mm centering: 125 mm (nozzle/ejtector plate) injection units +1. Aggregat+ horizontal injection unitt (intern. size 200) screw diameter: 30 mm shot volume: 85 ccm injection pressure 2350 bar 4 x heating zones +2.Aggregat+ vertical injection unit (intern. Size. 100) screw diameter 25 mm shot volume: 49 ccm injection pressure 2022 bar 3 x heating units Extras accumula ...

Sales are made on behalf of the customer. Professional high-pressure cleaner DYNAJET 500th HELI Blue Performance The No. 1 in efficiency, power and performance. Professionals from all industries worldwide rely on dynaJET's highly efficient high-pressure water cleaners. These high-pressure units impress with their universal application possibilities, extreme cost-effectiveness, absolute reliability, long product life and uncompromising quality. Standard safety equipment offers you and your employees the highest level of safety. The latest generation of DYNAJET high-pressure units offers reduced fuel consumption, lower emissions and improved ease of use. Get efficiency, or even the opportunity to conquer new business areas, in your company. All DYNAJET high-pressure cleaners are comprehensively tested by our quality management before they are delivered. Our product and accessor ...

Sales are made on behalf of the customer. Professional high-pressure cleaner DYNAJET 350th HELI The No. 1 in efficiency, power and performance. Professionals from all industries worldwide rely on dynaJET's highly efficient high-pressure water cleaners. These high-pressure units impress with their universal application possibilities, extreme cost-effectiveness, absolute reliability, long product life and uncompromising quality. Standard safety equipment offers you and your employees the highest level of safety. The latest generation of DYNAJET high-pressure units offers reduced fuel consumption, lower emissions and improved ease of use. Get efficiency, or even the opportunity to conquer new business areas, in your company. All DYNAJET high-pressure cleaners are comprehensively tested by our quality management before they are delivered. Our product and accessory portfolio ensu ...

Number of boring units // Diameter boring units (mm) 9x 3.0 5x 3.5 1x 4.0 3x 4.5 6x 5.0 9x 5.5 31x 6.0 2x 6.5 19x 7.0 18x 8.0 1x 8.5 9x 9.0 5x 10.0 9x 11.0 2x 13.0 3x 14.0 1x 15.0 1x 16.0 2x 18.0 1x 19.0

Attachment polishing machine HAU HR 4 for rotary parts up to max. 200 mm diameter, with 2 processing units, units equipped with overtaken sprueh guns for liquid polishing paste, disc diameter max. 400 mm, disc width max. 120 mm, shaft diameter 35 mm, machine similar illustration; overhauled, ready for use

CNC profiling and cut-to-length line make RAS type 29.17 line 2005serial no. 10/1, year of construction 2001consisting of:a)Sheet metal/strip straightening machine RAS type 26.45, built in 2001Sheet thickness (galvanized sheet steel up to 400N/mm2): 0.5 - 1.25 mmBelt width: 500 - 1500 mmStraightening speed: 0.9 - 15 m/min.Number of straightening rollers: 6 piecesNumber of take-off rollers: 4.8 kWWeight approx.: 2.1 twith movable control panelb)Roll feeder RASBelt width :500 - 1500 mmMax. feed length: 9999.99 mmFeed accuracy per 1000 mm: 0.2 mmDrive power: 1.8 kWWeight approx.: 1250 kgwith curved infeed roller conveyorc)Cut-to-length guillotine shears RAS type 82.16, built in 2001Max. cutting length: 1640 mmMax. sheet thickness: 2.0 mmCutting angle: 1.36°Strokes per minute: 63Stand projection: 100 mmsmallest remaining strip: 35 mmTable height: 750 mmDrive power: 3.0 kWWeight approx.: 950 ...

Polishing / buffing machine HAU HR 4 for circular parts up to 200 mm max., with 2 working units, units equipped with reconditioned spray systems for liquid polishing compound, wheel diam. max. 400 mm, width polishing wheel max. 120 mm, shaft diam. 35 mm, machine similar to picture ; reconditioned

Edge glue machine HolzHer express 1437 Edge gluing, flush milling, caps flush milling with chamfer milling or RADIUS milling with sep. Aggregate Schwabelscheiben 2 mm and two units for chamfering or just milling milling ABS edge 2 additional units for RADIUS Hours of operation 1072.5 hours Masch. No. 721/9-203 L x W x H: 400 x 120 x 170 cm Weight approx. 900 kg Built in 1992 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

RUIAN QUEENSENSE MACHINE DHB-500 film glove production line manufactured in 2020 by Chinese company RUIAN QUEENSENSE MACHINE CO.LTD. is used to produce double-layer foil gloves. The produced gloves, used for example in grocery shops or in production, guarantee effective protection against viruses and bacteria. The QUEENSENSE DHB-500 automatic disposable gloves production line consists of two identical machines, both of which feature a central drive to control all glove-forming mechanisms. The dual unwinding station is equipped with a clutch, which allows infinite adjustment of the film tension and dual inverters for unwinding control. High-precision feeding of HDPE or LDPE material to the sealing position and the final product sorting point is ensured by the installed servo drives controlling the entire process. After changing the heat sealing dies, the RUIAN QUEENSENSE MACHINE DHB ...

16 x 3.2MW 60Hz KAWASAKI Gas Turbine Power Plant Main specifications - Gas Turbine Model: M1T-23 x 16 sets - Maker: KAWASAKI - Power Output: 3,200kWe - Frequency & Voltage: 60Hz & 6600V - Year of Production: 2008 - Running Hours: about 60 hours - Fuel Oil: Natural Gas - Plant Auxiliary Equipment: 1 set This gas turbine plant has 16 x 3.3MW gas turbines with the optimal layout of 4 x 4 blocks and was initially installed as an emergency power supply in preparation for major disasters or large-scale power outages in the area. Fortunately, as there has been no serious emergency, this plant has had almost no operation, and the total running hours does not exceed 60 hours for each unit until today. However, as the plant has been regularly checked and well maintained, now the gas turbines units are in the best condition. This power plant is scheduled to be shut down in  ...

Printing and packaging machine for labels and continuous forms with 2 dry offset units, integrated UV final drying (2x), Eltromat and register control pressure for perforation. Working width: 520 mm print width: 510 mm Appendix: Roll Delivery: stack or sheet (A4 or A5), Shed delivery, smallest sheet 4" Printing units: dry offset; 2 x 24" and 1 x 25" (Color assignment: 2/0 or 1/1, but only UV drying, i.e. only on the front) Punching cylinders: Punch "top" (VS): 23 2/6" and 24" – 1 cylinder punch each "bottom" (RS):23 2/6", 24" and 25" – 1 cylinder each Perforation: Longitudinal: only continuously or arbitrarily over punching plate, Transverse: (two cylinders of the same format can be used at the same time can be used!) 16" - 3 cylinder part. 4" 17" – 1 cylinder part. 4 ¼" 18" – 1 cylinder part. 4 3/6" 20" – 1 cylinder part. 2 1/2, 5" 22" – 1 cyl ...

We have many used Mitsubishi Injection pumps for sell. Condition of the units is seen on the pictures. We sell this units only to dealers Companys ore for export without warranty. All oure information is based on best knowing we can not ensure that al information given ar right and complete. We try oure best to provide you the best information of oure gears. We only sell to resellers or companies and export to the exclusion of warranty. Brand: Mitsubishi Heavy Industries Model: PS6-HL-50 Sparepart No.: 48270-00004

TSDW-205W Semi Automatic Weighers is the perfect weighing solution for „difficult products, which need to be packaged at fixed weights for the supermarkets shelves. The TSDW-205W Semi Automatic Weighers in this series are unique to the market and fill the need for processing between manual and automatic packaging. The TSDW-205W are equipped with individual actuator units which are connected to a control computer. The principle of operation resembles that of an automatic multihead weigher. Features Semi Automatic Multihead Weighers with 12 Actuators Combination speed 20 to 25 wpm Number of weigh heads 12 Net weight for flat conveyor 150 kg Net weight for V-shape conveyor 160 kg Operating temperature 0°C to 40°C Available with flat and V-shape conveyor The main computer calculates the desired combination in a fraction of a second and activates the conveyor belt in the rel ...

Key data: 260 , 400

2 x CHP Schmitt Enertec Energen Combined Heat and Power units for the simultaneous production of electricity and hot water. Both units have had full engine rebuilds and are in good condition. Make and Model: Schmitt Enertec M08-BT2D22 Year: 2015 Hours: 65,600 kW: 260kW Fuel: Biogas Hz: 50 V: 400 Scope of supply: Engine, alternator, exhaust gas heat exchanger. Condition: Both fully rebuilt with new parts which include New cylinder liners, New pistons, New cylinder heads, New Conrods, New shell bearings . Unit 1: Total Run Hours: 67,000. Hours since engine rebuild: 5,000 Unit 2: Total Run Hours: 65,600. Hours since engine rebuild: 2,000 Price: £40,000 each

HAVE A GDY SIR; WE VE 3 PCS USED MASTER SYNCHRONIZER AND LOAD CONTROL UNITS AT OUR STOCK PART NO 9907 - 005 REVISION K 3PCS WE 1 PCS USED 2301A LOAD SHARING & SPEED CONTROL UNITS PART NO 9907 - 014 CARD IS NEW AND UNUSED BESIDES WE VE ALSO ADDATIONALY USED SAME TYPE LOAD SHARE CARDS AT OUR STOCK IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

8 colour units printing width : 1.000 mm material width : 1.050 mm printing lengths : 300- 760 mm Materials LDPE,PP,PA 20- 150 my HDPE,OPP 12- 100 my Laminates up to 150 my Paper: 30- 120 g/m2 Machine mechanical speed: max. 300 m/min (depending on material and print specific factors) Essentially equipped with: Non-Stop-unwind, max. roll D 1.000 mm, inner core D 76 mm Roll lift-in device Splicing unit Web tension measure and adjustment unit Web guide prior to printing, type BST Spreader roller Single-sided Corona pre-treatment for PE, type Softal, incl. ozone obliterator and suction Common steel impression cylinder, Nickel-Plasma coated Temperature unit, type Single lnk circulation with pumps and ink containers Automatie washing system Viscosity control Nip roller prior to 1st colour unit Web Video camera/monitor Operator column PROCONTROL® Dr ...

10 units configuration: unit 1 + drying unit + unit 2 + unit 3 + unit 4 + drying unit + unit 5 + unit 6 + coating unit + extended delivery Komorimatic with Technotrans Alpha C, S-APC, PQC, rollers-and blanket wash up device, without impr. cylinder wash up device, Anilox coating unit, extended delivery, ink temperature control, Antistatic device, Special device for printing plastic in feeder, UV rollers, ink agitators, 4 x IST UV interdeck dryer with 1 lamp each, all 4 drying units have 2 interdeck positions each, IST UV end dryer in delivery with 2 lamps

Profile milling units: 3 Slot units: 1 Machine control: ESA TRIA 4000 Stop length left mm: 2300 Workpiece thickness max mm: 35 Feeding magazine: Yes Total connection kW: 4.7

Pass width min mm: 15 Pass-through width max mm: 150 Workpiece length min mm: 1200 (grinding units) - 500 (grinding plate group) Material thickness min mm: 10 Material thickness max mm: 100 Space requirement mm: 13200 x 2500 x H 2050 Total grinding plate: 8 - mm 200 x 110 Workpiece width mm: 100 Total grinding units: 4 "LEV. C.100" - HP 3 Grinding belt length mm: 2780 x 40/90 Workpiece width mm: 80 Group Position: 2 Right (5-6) 2 Left (7-8) Tilt: -35° + 90° Painting station "Verve" - "Sistema di regolazione linea ink" - CE 2011 Complete with suction cups and pistols (position 9) Machine control: C.24U Total connection KW: 31 Outdated

<b>Features:</b> Used roller conveyor from the manufacturer Interroll Fuesse to order separately Condition: fully functional with traces of use Ideal for fast material transport Professionally dismantled and packaged Drive: King's Shaft Incl. SEW motor 0.37 KW <b>Technical data:</b> Dimensions of the roller conveyor The plant consists of 29 segments 12 Drive Units - SEW Engine 0.37 KW Total quantity in stock: approx.: 87,000mm Total width: 740mm <b>Details of the role</b> Clamping length: 660mm Diameter approx.: 50mm Axis distance: 75mm Material: steel, galvanized <b>Information on the framework</b> Material: Alluminium Height: 120mm Width: 40mm <b>Roller conveyor</b> The roller conveyor is ideal in the picking zone for interlocking machines or work places and optimizing the internal ...

Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg MAIN EXTRUSION UNIT To ...

ega Plus - LF 330 Internal machine number: Vega Internal C3 number: Variant 10 Printing process: UV flexographic printing Printing units: 1 Own Coating Unit: No Printing ink: UV - flexographic printing ink Drying: UV - drying Painting-partial: No Painting-full: Yes / Flexosleeve Varnishes: Gloss varnish, matt varnish, TTF varnish, luminescent varnish Laminating: No Material width paper and foil: min.: 150 mm / max.: 340 Print width: max. 310 Printing performance: only punching max. 200 m/min., printing max. 70 m/min. max. rolls Ø - down: 1000 mm / max. rolls Ø - up: 400 mm punching width: max. 320 mm Print feed: min. 80T = 254 mm Print feed: max. 136T = 431.8 Format punching: Rotary WGR 240 punching units: 2 Flat punching: No Punching sheet: Yes Punching cylinder: No Airshock cylinder: No Upper punch: Yes Lower punch: Yes Sheet cutting (crosswise) / leaf cutter: No ...

Machine: Gallus R250 Internal Machines No.: 567 Internal C3 No.: Variant 5 Printing Process: Letterpress Printing Units: 5c+Varnish Own Coating Unit: YES Printing Ink: UV Printing Inks Drying: UV Drying Painting-partial: YES / Flexo-Cliché Painting-full-f.: YES / Flexo-Cliché Varnishes: Gloss Varnish, Matt Varnish, TTF Varnish, Luminescent Varnish Lamination: NO Paper material width: min. 130mm / max. 270mm Print width: max.: 255mm Printing capacity: max. rolls Ø - From: 700mm / max. rolls Ø - On: 700mm Punching width: max. 255mm Pressure feed: min. 304.8mm (96T) Pressure feed: max. 596.9mm (188T) Format punching: Flat & rotary WGR 220 Punching units: 1x flat / 1x rotary Flat Stamping: YES Punching Plate: YES Punching Cylinder: YES Airshock Cylinder: YES Upper punching: YES Bottom punching: YES with pass. Umfg. to the Upper Punches Sheet Cutting (Cross) / Sheet C ...

KBA Rapida 76-5 + L SAPC ALV2 UV Age: 2012 Counter: 105 mio. Impression Max. size: 60.5 x 75 cm Printing format max.: 59.5 x 74 cm Max. paper thickness: 0.8 mm Max. performance: 18,000 sheets/hour Equipment: 5x printing units 5x UV Interdeck Drivetronic SIS Airtronic Cleantronic Air Control Alcolor Technotrans Alpha.C cooling device Ink temperature control Semi Automatic Plate changing system Automatic washing devices Harris & Bruno Coating Unit with Anilox 13 cm3 Extended Delivery IR and UV Dryer with 2 lamps Powder Sprayer Nice to know: -Machine is equipped with standard rollers -All Units have UV-Interdeck -UV system is classic. No LED -Machine has 5 power supplies for UV lamps and 5 UV lamps. They can be used in any configuration on machine.

MARK ANDY P3 – 330mm / 7 x FLEXO + 1 x UV DRYER Machine information: Performance Series A Platform With Endless Opportunity Designed to drive profitability in a highly competitive industry, the award-winning Performance Series product line redefines workflow productivity through its simple design, efficient waste savings and fast changeovers. Specifications:  Brand / type: MARK ANDY / P3-13-7 Hot Air + 1 x UV Dryer  Age : 2014  Webwidth : 330mm  7 x Flexo Units (Hot Air)  7 x Hot Air dryer  1 x UV Dryer  Machine has a multilayer module for the production of multilayer labels and a laminator.  Unwinder  Rewinder  Lamination/Cold foil  2x Punching Units plus Sheeting Station  good condition - has always been maintained by Mark Andy  P3 Imperial Metric  Web Width 10/13/17 inch 250/330/430 mm  Max Speed 750 fpm 230m/min  ...

GALLUS EM 510 S – 5 colour UV-FLEXO Machine information: The Gallus 510 S can be used to produce self-adhesive and monofoil labels as well as a wide range of other products. A state-of-the-art servo-driven web-feed system ensures optimum cost-effectiveness and superb quality results. Combined with the unique platform concept and the consistent modular design, these machines are a secure investment in your success – both now and in the future. Specifications:  Brand / type: GALLUS / 510S /Servo driven – like new  Age : 2008 – like new  Counter : Only 9.424 hour/runs  Webwidth : 510mm  5 x Flexo Units  5 x U-Dryer  BST Power Scope 300 (Web monitoring system)  Unwinder max.: 1250mm  Rewinder max.: 1250mm  Lamination/Cold foil  Turnable  Remailing 24"  Ben Bunch 500  Cross Cutting Cylinder  punching units (lengt ...

Number of drill units 7 Number of tapping units 4 Number of clamps 8

The monoblock F87 is an automatic intermittent movement machine that can perform three operations at the same time: a volumetric filling and two closures. Aqueous, alcoholic, sugary, foamy, viscous products can be given. Droppers, glass or plastic pipettes, nebulizers, normal or freeze-drying rubber caps can be introduced. You can apply screw caps, press caps, ferrules, PFP etc. The carter and the machine table, on which all the operating groups are fixed from the inside, are in AISI 304 stainless steel and protect the mechanical parts from the infiltration of the treated products and the water used for washing. The operating units and their supports are made of AISI 304 stainless steel and receive their motion from a single variator motor, obtaining the dual purpose of relating, without interruption, the speed of the machine with the rotation speed of the screwing or seaming, and not to ...

The RF303 Electrosurgical Analyzer tests electrosurgical units (ESU) for generator output and high frequency (HF) leakage. It is compatible with both isolated and earth/ground-referenced types of electrosurgical units. You can test both the high-level monopolar and the low-level bipolar ESU outputs using this versatile Analyzer. RF303 Electrosurgical Analyzer Tests Electrosurgical Devices (ESR) Generator power and radio frequency (RF) leakage. It is compatible with both insulated and earth/ground types of electrosurgical equipment. You can test both the high-level monopolar and the bipolar Low-level ESU outputs using this versatile analyzer. Device can be shipped worldwide. The tester can be shipped worldwide.

SCM-MINIMAX Universal Combi Model CU410 CLASSIC Specifications: - Useful working width of flush tables 410 mm - total length of the wire plates mm 1800 - Tilting wire guide degrees 90-45 - top dimensions thickness 410x605 mm - feed speed at thickness m/min 7 - min/max working height at thickness 3/230 mm - Dimensions of the spindle moulder table mm 1100x339 - Saw blade inclination 90-45 degrees - max. diam. Saw blade mm 315 - max. protrusion of the saw blade from the table at 90° mm 100 - max. protrusion of the saw blade from the table at 45° mm 80 - max. squaring capacity (basic machine) mm 1465 - cutting width at rip fence 820 mm - Useful spindle length 125 mm - Spindle rotation speed rpm 1400-3500-6000-8000 - max. spindle moulder diameter under the table 210 mm - max. tenoning tool diameter 275 mm - Motor power (n. 3 motors) HP 4 kw 3 Hz 50 Standard equipment - ...

Various control units for video and audio systems consisting of: 5 pieces Extron Amplifier XPA - two channels 100 W 1 piece Extron SW VGA - VGA/Audio Switcher 4 pieces Extron MLG 228 - media control units 1 piece FURMAN PS-SRE Series II Power Contioner + Sequencer 3 Pieces Extron MP8 Series 8 Media Presentation Switcher 4 pieces Panasonic beamer PI-F200 NTE with remote control 6 pieces 19" wooden racks 10U and more 4 pieces Fohn wall speaker Only for sale as a package

pressure: 250 bar control: Beckhoff turning speeds: 1435 U/min engine output: 5,5 kW rivet time adjustable: 2-3,5 sec compressed air: 6 bar total power requirement: kW weight of the machine ca.: 8 t dimensions of the machine ca.: 10x4x6 m Ingredients: 16x punch riveting tools 16x rivet feed units 6x Beckhoff control 3x HMI Mobile Panel 3x HMI panels 6x hydraulic units Material: Semi-tubular rivet made of stainless steel - flat head, different lengths Connection of 2 layers of aluminum (0.8 mm), no pre-drilling necessary The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Dimensions (length / width): 4800 x 1600 x 2400 mm weight: 1500 kg Götzinger Power Drill Type BF 297 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. M ...

workpiece length: 150 mm slide travel X-axis: 1060 mm z-travel: 280 mm swing diameter: 320 mm control: Siemens Sinumerik 840D rapid speed: 0 - 30 m/min work piece spindle speed: 0 - 6000 U/min flange:: workpiece spindle - bore: 45 mm diameter: 220 mm c-axis: zur Positionierung total power requirement: 65 kW weight of the machine ca.: 10 t dimensions of the machine ca.: - m The CNC 235 vertical hard machining center with vertical workpiece spindle allows the use as single-purpose machine for - Internal grinding - External grinding - Hard Turning Furthermore, these processes can be combined with each other and be supplemented by other technologies. equipped with: - CNC Control Siemens 840D - 2 Toolrevolver (li/re) Size 16 - 2 spindle units (X1, C1, Z1 / X2, C2, Z2) - Internal grinding spindle (45000 U/min) 18kW - Dressing Spindle Dr.Kaiser C72F - 1500-16000 U/min, 0,5kW - Marposs Workpiec ...

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Götzinger Power Drill in special version with dübelleim and press-in station With the Götzinger PowerDrill, you can choose: - Drill the front and long sides - Doweling of doors, seatings, fighters - The drilling patterns are freely programmable - You can: Grip handle and corner bearing, with quick-change Multi-spindle drilling heads - You can: lock casings, pusher and PZ as well as 3D tapes and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, Save and recall POWER DRILL - drilling and milling machine Universal drilling machine for drilling olives, corner bearings, dowel work On the front and the front, milling, lock boxes, tapes, etc. Base in stable design, covered with sheet metal Table top 1800 x 200 mm  ...

2008 NILPETER FA4 9 COLOURS FLEXO LABEL PRESS FULLY EQUIPPED FROM PP MACHINERY – GERMANY 2008 NILPETER FA4 9 COLOURS FLEXO LABEL PRESS FULLY EQUIPPED FROM PP MACHINERY – GERMANY 9 Full Servo Flexo printing units 2 Unwinding units for multiple layers Chilled Rollers Chiller 9 GEW UV Dryers Delam Relam on Rails Turning bar on rails Vetaphone Corona Web Cleaning Web Guide 2. Web Guide Laminating Cold foil application Double die cutters 2x Camera Inspection Manufacturer: Nilpeter USA Type: FA4 Year of Production: 2008 Printing width: 420 mm Machine is available immediately – Please ask PP Machinery Germany team for more information

Number of working units: 0   Total power: 0 kW Type: 0   CNC Brand: 0 CNC Model: 0 Technical data Units: vertical: 14 Rotary table:diameter: 400 mm Number of work stations max.: 15 Work-piece clamping: with device diameter: 50 mm Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.10 kW Weight of the control about: 300 kg Overall dimensions machine: Length: 800 mm Width: 700 mm Height: 2000 mm

Bihler RM 30 E punch bending machine Bihler RM 30 E punch bending machine for the production of stamped and bent parts made of strip and wire. Compact machine system for the production of precision stamped bent parts User-friendly machine and process control Bihler P CNC 400 Compatibility with RM 35, RM40 and RM4 tools Year of construction 2003 Machine housing and perforated plate Specifications Machine power: 5 - 400 strokes/min Feed length: max. 240 mm Backing edge of the strip: max. 80 mm in front of perforated plate Strip bottom edge: 4 mm above center machine Material dimensions: strip width max. 60 mm, wire Ø max. 4 m Material feeder right (176-05-00195.0) 240 mm feed length Specifications Material trailing edge: 80 mm in front of perforated plate Material bottom edge: 4 mm above center machine Material width: max. 60 mm Feed length: max. 240 mm  ...

Year 2000 Iinstall 2001 Max web width: 48” (1219,2 mm) Impression cylinder circumference: 69” (1752,6 mm) Product size: 219 x 304,8 mm Only 21 mill impressions (genuine) Produces: 128 pages of 8 3/8” x 11 1/4 or smaller every revolution Great for books,bibles or coloring books Equipment: 2 Megtec auto-pasters dlp width 1270 Two web guide unit with double timson indeed unit 2 Units blanket to blanket print units Timson brush dampening system Complete chiller system with circulation 2 Technotrans alpha d cooling devices 1 Folder type m3c/4-2dSstitching system streamliner 2000I Ink pump (200 lit. deposit) Ink agitators Console cdps 1 Extra set of brand new rollers Extra spare partsI Ink remote control system with console Grafikontrol system Tipografic ink unit for second color (logo´s,etc…) 4.645 hours on production Plate bender Rima stacker Free of any ...

1 aseptic Elopak filling machine line No E 5 suitable for ESL milk, UHT milk and fruit and Vegetable juice bottling. set at the moment for 3 formats Int. No.B 5, Series No. 453 Manufacturer: SHIKOKU-KAKOKI LTD Type: U-680A Year of construction 2007 with 3-lane run-off section Capacity 10,500 U/h Conveyor belts for individual packaging are manufactured by Polyketting BV Series No. 121614; Year of construction 2013 3 Elopak screw cap gluers a.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2005 Ref. 22111 b.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2007 Ref. 22121 c.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2007 Ref. 22122 d.) Individual packaging connection transport system from the Elopak filling machine to the 3 screw caps Gluing machines and on to the inle ...

Number of working units: 0   Total power: 0 kW Type: 0   CNC Brand: 0 CNC Model: 0 Technical data Units: horizontal: 2 Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.37 kW

Number of working units: 0   Total power: 0 kW Type: 0   CNC Brand: 0 CNC Model: 0 Technical data Units: horizontal: 2 Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.37 kW

one fixed unit and one movable unit (X-travel: 3000 mm) both units have manuals clamps variable turning speed center height: 1000 mm max swing of workpiece: 2000 mm cap with both units: 6000 kg cap with one unit: 3000 kg

Technical data Units: vertical: 1 Units: horizontal: 1 Way longitudinal slide: up to: 70 mm Working way: up to: 60 mm Swivelling range: 4 x 90 ° Work-piece clamping: with collet: EX 20 Working capacity: Boring diameter from: 0.15 mm up to: 8 mm Voltage 50 Hz 3x: 380 Volt Table drive: 0.4 kW Machine´s weight about: 750 kg Overall dimensions machine: Length: 1200 mm Width: 1120 mm Height: 1600 mm