unit used for sale

Hydraulic power unit / lifting unit VEB MASCHIENEN- U. GERÄTEBAU BRANDENBURG for pallet truck 121 Brieletta Year: 1983 220 / 380 V Motor: 2,2,000 2 kW IP54 with hydraulic cylinder ORSTA B1 - 50 x 70 / 0 W TGL 21551 Load capacity 1000 kp Pn 16 Mpa stroke: 700 mm Length: 900 mm used, tested ! Dimensions: 540 x 470 x 990 mm

Hydraulic power unit BOSCH REXROTH Year of construction approx. 1970Operating pressure Nominal capacity: 50 barOperating pressure: max. 70 barVolume flow: approx. 40 litres/min. Tank capacity: 240 litresEngine power: 4 kWNee connection: 380 volts, 50 Hz- 1x electric hydraulic valve BOSCHPlating requirement length: 1020 mm, width: 610 mm height: 1000 mmown weight: approx. 170 kg; used

Hydraulic Power Unit, Hydraulic Power Unit BOSCH REXROTH Order No: 983885 Year of Manufacture 1982Tank Capacity: 150 LitresOperating Pressure: 60 bar Nominal Pressure / Max. 100 barVolume Flow: 20 Litres/min. Motor power pump : 3 kWNetz connection: 380 volts, 50 Hz.- 1 piece hydraulic pump BOSCH REXROTH, type 1PV2V3-40/25 RAO1MC63- 2 pieces hydraulic valve BOSCH REXROTH with electric solenoid coil, type E6 E51/AG24NZ4- 2 pieces hydraulic valve BOSCH REXROTH with electric solenoid coil, type 4WE10D10OFLG24NZ4- 1 piece pressure accumulator- various throttle valves, pressure regulators and

Cooling unit water recooling unit DALEX type DRF 2Masch. No. 38913719 year of construction 1989Volume flow 0.35 m3/hCooling capacity 1950 wattsOperating pressure 2 to 3 barRefrigerant R 134a Device has been converted from R12 to R134aOperating overpressure 18 barPipe connection thread 3/4? Tank volume 600 x 400 x 350 mm = approx. 80 litresMains connection 380 volts, 50 HzSpace required L x W x H 900 x 800 x 1020 mmWeight 100 kgGood condition; used

Central lubrication unit, gear pump unit, MFE5-BW30+399, SKF, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - Minor damage to the level indicator plug without functional impairment. Technical data: - Central lubrication unit, MFE5-BW30+399, Vogel/SKF, new - Gear pump MFE5-2000+299, - 0.5 L/min, max. 28 bar, 230/400 V, 2700 rpm - 50 x 35 x 55 cm high - Includes level indicator - Includes level monitoring 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund th ...

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine, finishing unit, buffing unit -Manufacturer: Homag, 2 milling units and 2 buffing units from BRANDT KS 25 edgebanding machine -buffing units: motor KMER 0.18 kW 1360 rpm -Polishing roller: Ø 145 mm, height and depth adjustable / swiveling -Milling units: Motor Perske / Homag, see photos of nameplates -Voltage: 220 V / 200 Hz -Price/Fee: complete -Overall dimensions: 1200/800/H590 mm Total weight: 175 kg

Pneumatic rotary cylinder, swivel drive, pneumatic cylinder, air cylinder, swivel linear unit, swivel gripping unit, universal swivel unit -Manufacturer: Schunk / Festo Universal swivel unit with 2x swivel gripper unit -Swivel unit: Schunk SRU 35 -Swivel gripper unit: Festo HGDS-PP-16-P1-AB 2 pieces -Delivery/Price: complete -Dimensions: 345/240/H150 mm -Weight: 5.1 kg

Consisting of a total of 8 unit parts of approximately 615x305x325cm Equipped with 2x kitchen unit 2x toilet electric boiler approximately 8 electric heaters double glazing water and gas connection fully insulated partly equipped with concrete floors can be switched into 2 parts Auction-ID: A1-40133-70

1 toilet; 1 sink; ventilation grille; ventilation unit; light; toilet paper holder holder; lockable; 220v; drainage; forklift slots; crane hooks; 5889 Auction-ID: A1-45506-8

1 toilet; 1 sink; ventilation grille; ventilation unit; light; toilet paper holder holder; lockable; 220v; drainage; forklift slots; crane hooks; 5889 Auction-ID: A1-45506-2

2 toilets; 2 sinks; ventilation grille; ventilation unit; light; toilet paper holder holder; lockable; 220v; drainage; forklift slots; crane hooks; 5891 Auction-ID: A1-45506-16

Equipped with 2 toilets; 2 sinks; Clean water tank; Electric pump; Lighting; Meter cupboard; Unused Auction-ID: A1-42013-61

Spur gear with drive motor 30 kW (e.g. suitable for a ball mill), shaft diameter 45 mm, N1 = 1,450 UPM, N2 = 14.5 UPM, drive shaft diameter 130 mm, with electric brake, coupling with counter window 600 mm diameter. Oil 190 CSX/50C - Wa-No. 369226. Complete on foundation frame.

Technical data: Make: Moehringer Width: 1500 mm Length: 1000 mm Roll diameter: 108 mm - With stud rolls - Used to transport parquet friezes Pictures and further information on request

Filtration unit furbished with 2 PALL 8304 X-length housings For Hydrolic and lube oil filtration Any filterelements available on request

Filtration / cooling unit Furbished with 2 pcs of water coolers and 2 filterhousings PALL 8304 X= Lengths All kind of filterelements available in differnt micron ratings. Ideal to solve both filtration and cooling on various installations using Hydraulic Oil

Cooling unit Bitzer 4P-10.2Y-40P with condenser condenser for TK or Plus cooling. For more information call 00436641838175 or Info@frigocom.at

Freestanding distillery – 350 liter capacity Equipment: - Heating: by steam (against extra charge combustion chamber with water bath) - Steam jacket / water bath 4 mm stainless steel - Copper bubble Ø 900 mm, semi-conical - Filling DN 350 cast brass - Medium column / special fine burner with 3 trays - And attached tube end phlegmator and Kotzbecken - Incl. 4 sight glasses - Outlet ball valve DN 100 - Connecting piece agitator - Special tube cooler made of stainless steel including brandy - Spirit tubes stainless steel Basic price distillery, filling volume 350 liter: 32.620,00 € Additional equipment: Combustion chamber for solid fuels 48 kW made of 8 mm steel, incl. Smoke gas heat exchanger 8-pipe system 2.750,00 € Insulation water bath / steam bath made of stainless steel with 30 mm rockwool 1.760,00 € 4 connectio ...

Cat.-Nr. 08-1210 in a very good condition with flat bottom Measurements: Width: 4600 mm Depth: 5800 mm Height: 4350 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

PUR bag melter for processing from 2 to 3 kg PUR-DIN aluminium foil bags, Technical description: Hose connections, temperature controller PT100, 2 internal heating circuits, storage tank approx. 2.8 kg volume for bag change, 1 gear pump 7.3 cc drive via three-phase motor, glue stop shut-off direction, level monitoring for the Bag change with optical and acoustic signal, electronic Control with larsicht input (multilingual), weekly timer, digital inputs and outputs for integration to the mother machine, melting capacity adhesive-dependent, temperature reduction, Operating voltage 400 V Including - Hot glue hose length 3.5m i.D.10mm - Application head large glue outlet 5.6mm probe Pt100 - Homag cover plate QA65 with hose aging re - Switching amplifiers - Teflon probe S-506

Cat.-Nr. 08-1209 in a very good condition with Flat Bottom Volume: approx. 25.000 Litre / Chamber Measurements: Width: 4600 mm Depth: 5800 mm Height: 4350 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Hydraulic

Cat. No. 12-1160 in very good condition Measurements and Weight: LxWxH: 80x40x105 cm Weight: 30 kg Manufacturer: Maselli Misure Process Analisers Model: UR 6 W AL Serien-Nr 30384 Range 40 150 0 Temp: 20°C Voltage: 220 V For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

The teedwater is pre-heated in the exchanger E009, by steam condensation coming trom the last column, and in the pre-heaters F004-F001 by condensate produced in every effect. The teedwater evaporates partially in the first column (E001) as heated by industriai steam. The industriai steam passes through the pre-heater F001 and is drained by steam trap ST001. The produced pure steam trom the top and the water not evaporateci trom the bottom 1 -pass to the tollowing effect, where the process is repeated at lower pressure and temperature. The distillate produced by pure steam condensation goes to the pre-heater F002. The process is repeated for all columns in the same way. The steam produced in the last effect is condensateci and cooled together with the distillate coming from pre-heaters in the exchangers E009 and E01O, by teed and cooling water. 1 - SINGLE EFFECT RUNNING DESCRlBTION ...

Machine type water circulation cooling unit Merkle brand Type WK 200 Connection voltage 1 x 230 Volt Connection 6-pin Harting plug Water pressure 3.5 bar Water connection 2 quick-release couplings Water tank 3 ltr. Content Dimensions L x W x H 590 x 200 x 210 mm Weight 15 kg Age 8 years Condition workshop checked as new Warranty 12 months from the date of delivery Original price 990,00 € + VAT Price 590,00 € + VAT ___________________________________________________________ The machine is located in the Wilhelm Merkle Schweisstechnik GmbH Anton-Böck-Strasse 31 81249 Munich, 81249 Contact person is Mr. Manuel Maier. Of course, we will send the machine to you for 60, - € by forwarding agent throughout Germany. ____________________________________________________________ You can also finance our machine with 0%! We offer you  ...

SAW CARRIAGE DISTANCE: 610-710 MM, RANGE OF CUTTING: HEIGHT: 200 MM, WIDTH: 200 MM, DRILL DIA.: 12 - 40 MM; STROKE: 630 MM;

1 of used hot-melt unit, make Nordson, type 3700-2BB36. Tank capacity 13.6 kg, melt rate 18.1 kg/hour. Suitable for 380-415/220-240V, 50/60Hz. With Pneumatic piston pump 21:1, non-recirculating manifold for 6 hoses witih standard filter, Multiscan controls for 6 hoses and guns. Hoses and guns NOT included. New 1990.

HOLZKRAFT raw air extraction system ASA 1901 Product name: Raw air extraction system ASA 1901 Manufacturer: Holzkraft Item number: 5128191 Condition: As good as new technical details: • Filter area: 1.92 sqm • Rated power: 1,900 cbm/h • Chip collection volume: 110 l • Chip bag: PVC d= 414 mm Length x 1,100 mm Width/depth approx. 650 mm • Diameter intake manifold on the device: 203 mm • Diameter intake manifold at the distributor: 1 x 120 mm, 1 x 100 mm • Height filter cartridge: 2,100 mm • Sound pressure level: 85.7 dB(A) Hints: • The system is suitable for milling, planing and sawdust, but not for dust! • By rotating the intake unit by 180°, the suction direction can be done from above or below. This requires light conversion work. Engine data: • Motor power: 1.5 kW • Speed: 2,950 rpm • Power supply ...