unit used for sale

weight max.:ca. 30 t gear diameter:320 mm weight of the machine ca.:3 x 950 kg dimensions of the machine ca.:3 x 2020 x 870 x 1100 mm

weight:400 kg 8 clamping jaws each ca. 600 x 210 x 170 mm , hole dia. 22 mm, center distance ca. 170 mm was used for clamping rings on a Vertical Turning Machine

material width:550 mm material thickness:0,4 - 1,6 mm no. of straightening rolls:11 straightening roll diameter:60 mm number of draw-in rolls:4 diameter of draw-in rolls:60 mm band speed:4 - 50 m/min power capacity:3,0 kW weight:1,7 t Dimensions (WxDxH):2,5 x 2,0 x 1,7 m

Linear unit for pneumatic cylinders COMP AIR

Linear unit for pneumatic cylinders JOUCOMATIC

Hydraulic power unit with tank HYDRONORMA pump: Lamborghini MLPD/G 148 C ( MLPD/G148C ) engine: 2.2 kW 220 / 380 V Tank: 20 l used, tested ! Dimensions: 600 x 340 x 630 mm

2017, machines have been put away working and have had annual inspections

Lumiflex ULZS-4/1 Accident Protection Device Control Unit

2011 (note you it is the left machine in the photo), machines have been put away working and have had an annual check

Incl extra punching unit Pseunamic operation

Hydraulic power unit with tank and radiator REXROTH pump1: 1PF2G222/16RA1MSG pump2: 1PV2V3-40/12RE01MC100A1 motor: 2.2 kW 220 / 380 V Tank: 120 l two separate pressure circuits !' used, tested !' Dimensions: 770 x 570 x 940 mm

Hydraulic power unit PAGUS Pump: SPN 2/14 DC002/9B ( SPN2/14DC002/9B ) Motor: 5.5 KW 400 / 690 V Tank: 120 l used ! Dimensions: 1450 x 900 x 890 mm

2015, machines have been put away working and have had annual inspections

Hydraulic Power Unit with Tank REXROTH 952563 MPU1-V710-100L/ 00025161+00963916 Pump: PV7-11/06-10RA0MA0-10-A501 P: ca 95 bar Q: ca 11 l/min motor: 3 kW 230 400 V Tank: 50 l used, tested ! Dimensions: 550 x 400 x 1850 mm

Hydraulic power unit PAGUS Pump: VT VOTL BOLOGNA 06 D 3 01 98 ( 06D30198 ) Motor: 3.0 kW 380 / 660 V Tank: 50 l used ! Dimensions: 1030 x 500 x 890 mm

Hydraulic power unit, drive unit REXROTH U 11.0 R 3.8 - 20 P = 150 kp/cm² V = 2.73 cm3 motor: 1.1 KW 220 / 380 V Tank: 20 l used, tested ! Dimensions: 740 x 570 x 430 mm

Hydraulic power unit ORSTA 52182 P: 12.5 Mpa (125 bar) motor: 1.5 KW 220 / 380 V Tank: 40 l used, tested ! Dimensions: 750 x 400 x 1000 mm

With foot control including various molds, tooling and documentation

2011 & 2016, machines have been put away in working order and have had annual inspections

2015, machines have been put away working and have had annual inspections

Hydraulic power unit with pneumatic hydraulic pump MAXIMATOR pump: G 15 - 2L ( G15-2L ) Drive pressure: max.11 bar P: max. 320 bar Q: 62 cm3 Tank: approx. 100 l used, tested ! Dimensions: 645 x 540 x 955 mm

Hydraulic power unit ORSTA B.604.263 Delivery pressure: 63 kp/cm² (61.7 bar) Power: 2.2 kW 2 motors and 2 pumps used, tested ! Dimensions: 1350 x 600 x 980 mm

2015, Crack in screen but functional, machines are put away working and have had inspection annually

Hydraulic power unit SCHNUPP 100 bar 90 l/min pump MOOGMOOG 0514 700 127 280 bar motor: 22 kW 380 / 660 V stainless steel tank: approx. 750 l used, tested ! Dimensions: 2300 x 1700 x 1900 mm

Hydraulic power unit ORSTA S4/63 P = 63 kp/cm² Q = 4 l/min engine: 0.75 KW 220 / 380 V Tank: 40 l used, tested ! Dimensions: 1000 x 700 x 580 mm

2 KSB centrifugal pumps with frequency control from the ice water circuit of a refrigeration system. Capacity: 2 x 15 m³/h at 2 bar, Additional title: centrifugal pumps, Delivery rate: 15 m³/h, Delivery pressure: 2 bar delivery head 20 m, Running direction: clockwise

Hydraulic power unit, compact power unit BUCHER UP100K1G3-01AP100 222396001 150 bar 1.2 cm3 / U motor: 0.75 kW 1400 rpm 220 / 400 V New !' Dimensions: 460 x 240 x 200 mm

Hydraulic power unit ORSTA with gear pump C10-2R, TGL 10859 motor: 1.1 kW used, tested ! Dimensions: 750 x 500 x 930 mm

CNC unit for routing and boring Brand: Atemag Type: Function Line Soft Touch One With surface copying function with fix spindle ER25 and fix bell Max. drive speed 18,000 R.P.M. Max. tool spindle speed 18,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 10Nm Tool interface: fix ER25 Adjustment distance: 70mm

Multispindle drilling head unit for cnc working centres Make: ATEMAG Multispindle drilling head for economical drilling of numerous holes or complex hole patterns in just one machining stroke. Max. drive speed: 10.000 Rpm Max. tool spindle speed: 10.000 Rpm Gear ratio i= 1:1 Torque: max 1-5 Nm Number of tool output: on request

Hydraulic power unit with tank, compact power unit MANNESMANN REXROTH UpA4V-10 / A4.00 - 300MA ( UpA4V-10 / A4.00-300MA ) p max = 200 bar Q = 4.0 l/min motor: 1.6 kW 220 / 380 V New ! Dimensions: 290 x 220 x 330 mm

hydraulic power unit with 40 liter tank 220 / 380 V motor: 0.55 kW IP54 used, tested ! Dimensions: 610 x 580 x 610 mm

CNC unit for boring, routing and sawing Brand: Atemag Type: Vario Classic With one tool interface, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER25, ER 32, saw blade flange 30 mm, sawblade dia. max. 180 mm or modular

CNC unit for boring, routing and sawing Brand: Atemag Type: Function Line Vario Viso With adjustable angle 0 - 100° Max. drive speed 15,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 15 Nm Tool interfaces: combination ER 25 and saw, saw blade flange 30 mm Version with one single clamping screw, locking with the lever

Hydraulic power unit with tank FLUTEC PTF-200/1.0/M/ pump: BOSCH FD 071 0 513 300 101 p max = 70 bar Q = approx. 17 cm3/U motor: 2.2 kW 220 / 380 V tank approx. 100 l used, tested ! Dimensions: 650 x 550 x 1000 mm

Open Linear Bearing Unit STAR 1067-630-40 067-30 Diameter: Ø 30 mm Foot: 84 x 60 mm New ! Dimensions: 84 x 68 x 59 mm

CNC unit with oscillating cutter head Brand: Atemag Type: Function Line Soft Cutter Pro Max. drive speed 6.000 R.P.M Max. tool spindle speed 9.000 R.P.M. (Frequency 150Hz) Gear ratio i = 1:1,48 Torque max. 8Nm Amplitude: 4mm

CNC unit for boring, routing and sawing Brand: Atemag Type: Ultra Line Mono With one tool interface, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,5 Turning direction left/right Torque max. 22 Nm Tool interfaces: ER 25, ER 32, saw blade flange 30 mm, dia. max. 300 mm We recommend with saw blade or for heavy duty rough milling a gear reduction: Type MONO, version R Max. drive speed 12,000 R.P.M. Max. tool spindle speed 8,000 R.P.M. Gear Ratio i = 1:0,676 Torque max. 22 Nm

Hydraulic power unit, micro power unit ORSTA 2.5/16 -0/0 P: 16 Mpa (160 bar) engine: 1.1 KW 220 / 380 V Tank: 10 l on trolley ! used, tested ! Dimensions: 1000 x 450 x 910 mm

Evaluation Unit PERPERL+FUCHS DENT-M MVI-D2-2HRX Part No. 33770 24 V DC see also EL2739 ! used, tested !' Dimensions: 140 x 100 x 80 mm

CNC unit for corner notching in off-set design Brand: Atemag Type: Function Line Extra 2 Max drive speed 8,000 R.P.M. Max. tool spindle speed 12,000 R.P.M. Gear ratio i = 1:1,48 Turning direction left/right Torque max. 20 Nm Tool interface: Special Attention: price is just valid for standard version

CNC unit for boring and routing Brand: Atemag Type: Function Line Quattro With four tool interfaces 2x boring / 2x routing Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER 25, ER 32

Hydraulic power unit with radiator BOSCH 0 813 260 213 ( 0813260213 ) 2 819 042 654 ( 2819042654 ) Q : 23 / 15 l/min p: 75 bar (1088 psi) tank capacity: approx. 100 L motor: 3 kW 400 V 3AC Cooler: 0.37 kW 220 - 240 / 380 - 420 V 3AC used, tested ! Dimensions: 1250 x 7800 x 1670 mm