127,856 used machines on RESALE, but how to find them? Machine Search
The facility is an exhibition facility or test facility in an absolutely new condition. The plant was built in 2024 for the filtration of cooling lubricants in tool grinding: oil + carbide. Filtration is carried out with the help of 61 filter cartridges located in a cylinder housing. The dirty oil is pressed through the filter surface and runs through the inside of the filter into the clean container. The filter works in fully automatic mode. The filter pressure is monitored during the filtration process and as soon as the filter cake has been formed and the pressure increases, the filter is backwashed with compressed air. Then the filtration process starts all over again. The filtration system can be directly connected to the grinding machine, lapping machine, honing machine, etc. Filtration is carried out without consumables, as the filter is backwashed (filter flow, etc.). Th ...
Refrigeration unit FRASCOL LB2-Q736-0Y-2T with condenser USAC16E and compressor Q7-36.1Y1000. FRASCOL Q7-36.1Y1000 Compressor Power: 7 hp Flow rate: 35.86 m³/h with 2 pcs fan HIDRIA R11R-4525A-4T-5747 Power: 315W and 1420 rpm Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
Year of manufacture 1997 Foil Packing Machine Angle welding machine Manual installation Shrink tunnel Mobile substructure Price on request. We deliver and install worldwide!
Hot melt machine 3~, 3LNPE, 20A, 5.8 kW, 400V, 50/60Hz very little used / replacement device Complete with: 2 application heads 2 heating hoses length: 120 cm W08T200 Encoder Balluff BDG 6110-2-10-30-Z061-1200-65 Product Recognition Photocell Manual approx. 15 kg hot glue
Make: BITZER Compressor BITZER 4J-13.2Y Power: 13 hp Flow rate: 63.5 m³/h Condenser EKO with 4 pcs fan for positive and negative cooling Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
Used homogenizer AK SYSTEMS, type: Hydro Grind laboratory system 50 liters For the production of liquid to medium-viscosity emulsions, dispersions or suspensions - Laboratory equipment with a capacity of 50 litres - All-in-one solution for food, cosmetics, chemicals and pharmaceuticals - Enables easy introduction of solids into liquids - Allows homogenization into a fine droplet structure - Vacuum container - With double jacket for heating or cooling (2 bar) - Maximum temperature in the container: 95°C -Vacuum pump - Connection: 400 V, 50 Hz, 3Ph, 8.0 kW - Weight: 120 kg (without control cabinet) - Condition: Good, ready to use Visits and test runs are possible by arrangement.
Lot can be loaded at the buyer. Auction-ID: A1-40133-264
Falzniederdruckpresse / Joint Nipping Press Gantenbein ROLONG RE SN. 1060 Serial-No. 1060 hydraulische Press / hydraulic press Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Schwertfalzwerk Eigensteuerung - Mobile Knife Folding Unit SelfControl MBO Z6 Year 2008 - Serial-No. 101682080415 Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 20m/min - max. 160m/min Produktivität / Productivity 15.000 cycles/h Antriebsregelung / Drive control MC Control with potentiometer Auf Anfrage Koppelbox MC Control auf Navigator / On request Couple Box MC Control to Navigator Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Technical data Maximum pressure: 50 tons Year of Make: 1994 Pressing force: 7.14 kg/cm² Number of bindings: 3 horizontal Channel cross-section: 1000 x 700 mm Dimensions of the tailgate: 145 x 95 cm Bale weight: do 500 kg Weight: approx. 10 tons Power connection: 400 V/ 45 kW Bale tying: automatic Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the bale chamber for easy maintenance
Falzwerk 2. Station Eigensteuerung / Folding Unit 2. Station SelfControl MBO T79-2-81/4 Baujahr / Year 1994 - Serial-No. 940114747 4 Taschen Falzwerk / 4 buckles folding unit Arbeitsbreite max. 460mm / Working width max. 460mm Eigensteuerung / SelfControl Nachgelagterte Messerwelle / rear mounted slitter shaft Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Equipped with: 2 sets. Set 1: Stainless steel gas distribution panel + safety valves + high-pressure hoses – complete system Description: Very solid industrial gas distribution set, from a professional storage room for oxygen cylinders. Everything has been removed in working order and is in good condition. Ideal for use in laboratories, gas technology, CO₂/Argon/O₂ distribution or as part of a larger plant. ✅ Included in this set: 1x stainless steel gas distribution station with 4 connections 4x high-pressure pressure gauges (brand: WIKA) 2x pressure regulators with blue adjustment knobs 4x stainless steel high-pressure hoses (complete with couplings) 1x shut-off module with pressure gauge and hand tap 1x safety valve (Viega) 1x overpressure protection from Bestobell Valves (35 bar – 1020 Nm³/h flow – -196°C suitable) Various brass and stainless steel fittings, piping an ...
Eindruckwerk mit Nummeriereinrichtung / Imprinting Unit Numbering Heidelberg GTO52 Year 1997 - SN. 790490 Eindruckwerk / Imprinting Unit Nummerierwelle mit 2 Sitzringen / Numbering shaft with 2 mounting rings 2 Nummerierwerke / 2 Numbering boxes 1 Schaltkurve links und rechts / 1 cam left and right Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Equipped with 3 toilets; 3 pee trays; boiler; Sinks Auction-ID: A1-40104-150
Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...
Eindruckwerk mit Nummerier- & Perforiereinrichtung / Imprinting Unit Numbering- & Perforation Unit Heidelberg PM / SM 52 N&P Year 2001 - SN. 361748 Eindruckwerk / Imprinting Unit Nummerierwelle mit 4 Sitzringen / Numbering shaft with 4 mounting rings 2 Perforierarme / 2 Perforating arm 2 Nummerierwerke / 2 Numbering boxes 1 Schaltkurve links und rechts / 1 cam left and right Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
3. Falzstation - Eigensteuerung - 3. Folding unit - SelfControl MBO T92/444 - 56/4 Year 1986 - Serial-No. 20860601 Infeed width max. 560mm 4 buckles SELFControl Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...
Schwertfalzwerk / Mobile Knife Folding Unit GUK ZG 500 Year 1999 Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 40m/min - max. 160m/min Produktivität / Productivity 20.000 cycles/h Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...
Neue Nummerierwerke - New Numbering units Zeisser 100/200 ZAV Some Numbering heads ZEISSER - NEW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
High-performance fan Zenner, type VTZ 710/63/1 Sonder, built in 2014, consisting of control cabinet, frequency converter, cell airlock Specifications Manufacturer: Zenner Ventilatoren Type: VTZ 710/63/1 Sonder Year of Make: 2014 Volume: 4.72 m³/s Temperature mx.: 80°C Density: 1.2 kg/m³ Total pressure: 5,000 pa Speed: 2900 1/min Motor: 55 kW Voltage: 400/690 V / 50 Hz Weight: approx. 800 kg Remark: The fan is intended for transporting paper/cardboard. In the process, the material is also chopped. The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with your material for an expense allowance. We will also be happy to answer any questions you may have about the mac ...
Überleitstation / Transfer-Unit Müller Martini Überleitstation Müller Martini von der Zusammentragmaschine zum Klebebinder Von der ZTM MM Z1 / MM 201 zum Klebebinder Pony 246 - 3020 Transfer-Unit Müller Martini from Gatherer to Perfect Binder From the Gatherer MM Z1 / MM 201 to Perfect Binder Pony 246 - 3020 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Without pallet truck, dimensions platform 880x860 mm Auction-ID: A1-45682-38
Sell: Ventilation module GR31C-ZID.DC.CR Item number: 7515721 / 186781/H01 New, unused centrifugal fans from remaining stock for sale at very attractive prices. The product is reliable and robust. The GR31C-ZID.DC.CR is a high-quality ventilation module, ideal for industrial and commercial applications where efficient air circulation and cooling is required. Equipped with backward-curved blades, it ensures optimal airflow and high energy efficiency. This module is designed for use in demanding environments and offers reliable performance and durability.
Sell: Ventilation module GR31C-ZID.DC.CR Item number: 7515722 / 188445/H01 New, unused centrifugal fans from remaining stock for sale at very attractive prices. The product is reliable and robust. The GR31C-ZID.DC.CR is a high-quality ventilation module, ideal for industrial and commercial applications where efficient air circulation and cooling is required. Equipped with backward-curved blades, it ensures optimal airflow and high energy efficiency. This module is designed for use in demanding environments and offers reliable performance and durability.
Sell: Ventilation module GR35C-ZID.DC.CR Item number: 7515723 / 188443/H01 New, unused centrifugal fans from remaining stock for sale at very attractive prices. The product is reliable and robust. The GR35C-ZID.DC.CR is a high-quality ventilation module, ideal for industrial and commercial applications where efficient air circulation and cooling is required. Equipped with backward-curved blades, it ensures optimal airflow and high energy efficiency. This module is designed for use in demanding environments and offers reliable performance and durability.
Sell: Ventilation module GR35C-ZID.DG.CR Item number: 7515724 / 188446/H01 New, unused centrifugal fans from remaining stock for sale at very attractive prices. The product is reliable and robust. The GR35C-ZID.DG.CR is a high-quality ventilation module, ideal for industrial and commercial applications where efficient air circulation and cooling is required. Equipped with backward-curved blades, it ensures optimal airflow and high energy efficiency. This module is designed for use in demanding environments and offers reliable performance and durability.
Screw pump Aggregate Manufacturer : Allweiler Type: SNF80ER46U12.1-VV1 with motor Type: TM132M/4AT The unit is NEW and fully functional. see pictures for more details.
length:1200 mm height:800 mm weight of the machine ca.:150 kg dimensions of the machine ca.:1200 x 600 x 800 mm
weight max.:ca. 30 t gear diameter:320 mm weight of the machine ca.:3 x 950 kg dimensions of the machine ca.:3 x 2020 x 870 x 1100 mm
Mechanical filter Air volume: 2000 m³/h Device extraction capacity Colour: Light grey Electrical connection: 400V, 50/60 Hz 0.75 kW Footprint: 900 x 300 mm Weight: approx. 50 kg
EREMA flush filter with partial flush back. SW 4/134 RTF
Double Swivel Head Fast Runner SK40 for the Deckel FP Milling Machine without Motor However, the motor of the normal high-speed engine should fit just as well. Although the complete head probably has 70kg at the end, it probably even fits from FP1 upwards to FP4 Very good used condition, either never used, or only a few times. Except for slight traces of storage, no signs of wear to be seen. The spindle rotates cleanly and easily. However, the (drilling) stroke is a bit heavy, probably has to be adjusted. Pickup. However, a delivery can be arranged in advance, can... You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice.
Complete plastics recycling plant in operation. PRICE MACHINE WITH 2 PISTON FILTERS: 520.000€ PRICE MACHINE WITH 1 PISTON FILTER AND A 1 BRITAS FILTER MODEL ABMF 1050-12: 660.000€ 8,500 HOURS OF WORK. IN PERFECT CONDITION. PRODUCTION /HOUR: 900/1,000 KGS. MATERIAL: LDPE, QUALITIES 98/2 AND 99/1 AFTER 1 WASH.
Daikin ERQ200A7W1B Condensing unit Serial: 8008515 2020, condensing unit, Gas R410A, 3Ph
weight:400 kg 8 clamping jaws each ca. 600 x 210 x 170 mm , hole dia. 22 mm, center distance ca. 170 mm was used for clamping rings on a Vertical Turning Machine
maximum number of results exceeded
please refine your search
10 € 
