128,598 used machines on RESALE, but how to find them? Machine Search
hydraulic unit -The hydraulic unit comes from a hydraulic elevator -Design: IM 1209
Compound plant Bitzer with 6 pcs. compressor Bitzer S6F-30.2Y, in a container as a machine room, with control box fixed wired and condenser with 6 fans on the container.
Blast Freezer Refrigeration Unit Bitzer 16 HP Two-stage with evaporator LH135-S6j-16.2Y, 63,5 cbm/h Vaporizer Crocco Italy
Speedometer unit -Manufacturer: Renault KBA to2): -3004 -Model: Scenic KBA zu3): 575 -Model Type: 1.6 16V ABS: Yes -Transmission Type: Manual -Engine code: K4M 700 -Fuel type: Petrol -Year of manufacture from: 09/1999 Power kW: 79 -Year of manufacture up to: 08/2003 Engine capacity cc: -1598
Speedometer unit -Car: Renault Clio -Year of manufacture: 02/2001 -Part number: 820072506
hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 100 bar -Liter output: 21 l/min -Weight: 200 kg
Koma blast freezer refrigeration unit with Bitzer compressor S6F-30.2Y, as solo compressor or S66F-60.2Y, tandem compressor Refrigeration unit with compressor, subcooler, oil separator, liquid separator, collector, filter, pressostats, control box. All on one rack, easy to transport.
Hydraulic power unit, hydraulic pump, hydraulic pump -double pump -Max. pressure: 60/200 bar -Liter flow rate: 6/24 l/min -Motor power: 5.5 kW -Speed: 1445 rpm -Hydraulic valves -Hydraulic tank -Hydraulic filter -Weight: 230 kg
Inv. Num. : 6803 Type: SUPRAREX SXE P-1 400 Producer: ESAB Created: 2007 Parameters: Table height: 700 mm Cutting speed: 24000 mm/min Sheet thickness: 300 mm Cutting length: 2x6000 mm Cutting width: 3000 mm Machine height: 2190 mm Machine length: 2025 mm Machine width: 4654 mm Machine weight: 2000 kg
Key data: 250 mm, 4 kW, 4060 m³/h
arke: Holtrop Jansma Clean Air Extraction Type: MSO 250 Year of construction: 2016 M-No.: W0056730S Clean air extraction: MSO 250 with flame protection device Intake support: ø250 mm Length: 2,250 mm Width: 1,230 mm Height: 2,840 mm Weight: 600 kg Capacity: 4,060 m3 /hour Pressure: 1,900 Pa Power supply: 4.0 kW, 380V, 9 Amp Filter surface: 27 m2 Filter bags: 30 pcs. Length of filter tubes: 1,450 mm Filter tube diameter: 200 mm Cleaning: included Noise: dB(A) Flame protection system: automatic fire extinguisher with powder extinguishing agent, automatic slider in the return air duct, automatic electrical shutdown of the extraction (New powder fire extinguisher witrd assembled before delivery) Scope of delivery: filter system, with built-in intake fan, control cabinet, automatic fire extinguishing installation with flame protection damper
Stationary high-pressure pump unit Hammelmann HDP 77 on base frame. Similar but no Kamat, Uraca, Woma. Pump Type: HDP 77 Operating pressure: 330 bar Flow rate: 59 l/min. Drive speed: 1500 rpm. Drive power: 37 kW with Siemens 1LA6223-4AA60 electric motor 45 kW with pressure regulating valve, Fzhoqck with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,450x750x1,150 mm Weight: approx. 600 kg Year of construction: 2019 Condition: In good used condition.
Hydraulic unit, hydraulic pump, hydraulic pump -Spare part E forklift -Power supply: 24 volts -Power: 2.8 kW -Speed: 1600 rpm -Hydraulic tank -Weight: 70 kg
Hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 80 bar -Liter flow rate: 18 l/min -Motor: 2.2 kW 950 rpm -Hydraulic tank: 800/650/H280 mm -Dimensions: 1000/650/H1150 mm -Weight: 400 kg
Hydraulic power unit MTS 507.05 with control cabinet Pmax: 210bar Qmax: 40L Rated Current: 50A Year unknown, AEG Motor Water Return Cooler
Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: 100 bar -Liter flow rate: 6 l/min -Hydraulic tank -Hydraulic valve -Weight: 110 kg
Hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 63 bar -Liter flow rate: 4 l/min -Drive: 0.75 kW -Hydraulic tank -Hydraulic valve - Additionally: Hand hydraulic pump -Weight: 110 kg
Paper format: min. 10 x 16 cm // max. 35 x 50 cm Brochure format: min. 8 x 5 cm // max. 35 x 25 cm Equipment / Additional information: Page circumference 80 gr./m2 up to 100 pages Work cycles max. 4000 per hour 4xHohner 48/5 stitching heads Easy adjustment option for head stitching Break-in sword fold with adjustable folding rollers Front cutting unit via upper and lower knives
Reverse osmosis station. Manufacturer: Stilmas. Year of production 1997. The device is used to produce purified water using the reverse osmosis method. It consists of three parts: a pre-treatment system, a reverse osmosis system and a purified water storage and distribution system. Each part is connected in series with the other parts, which means that the reverse osmosis system cannot operate if the pre-treatment system does not supply it with water, and the cycle cannot operate if the reverse osmosis system does not supply purified water. Water to supply the installation is taken from the municipal water supply network. The efficiency of the device is 0.7 m3/h and the conductivity of the purified water obtained is < 4.3µS/cm2. PRELIMINARY CLEANING • 20 µm filter • softening columns (A 64A and A 64B) • Na2S2O3 (sodium thiosulfate) dosing system • NaOH (sodium hydroxi ...
Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: approx. 40 bar -Liter flow rate: 15 l/min -Drive: 0.55 kW 1400 rpm -Hydraulic tank -Foot switch -Weight: 100 kg
- Used hydraulic power unit complete with control cabinet. - Ready to connect and ready to use. - E.g. for servo hydraulics use. - Litre capacity: 138 L/min. - Nominal pressure: Pmax 280 bar. - Electrical supply: 132 kW / 50 Hz / 400 V. - Incl. comprehensive and maintained components (see pictures). - Aggregate rental possible. - Other power units and hydraulic components available on request (sale/rental).
Double-end tenoner, edge processing machine, flush trim router bit, edge router bit, spindle motor, milling motor -2x motor: 0.4 kW 20 shaft 11300 rpm at 200 Hz -Motor: mounted on guides -Motors: swiveling -Cutter: with indexable inserts -3x consoles: each with 2 motors Price: per piece -Weight: 60 kg/piece
Spindles, machining unit, automatic drilling machine, drilling machine, pillar drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Max. feed rate: Stroke 60 mm -Drive: 1.1 kW -Recording: 10 x 17 mm -Number: 2x quill processing units available Price: per piece -Weight: 25 kg/piece
Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.15 kW 11160 rpm at 200 Hz -Saw: max. Ø 150 mm -Motor: mounted on guides -Travel distance: 320/100 mm -Dimensions: 550/250/H330 mm -Weight: 17 kg
HDPE Film Washer Year of construction 2016 0 operating hours (never went into operation) Manufacturer: NEUE HERBOLD, D-74889 Sinsheim composed of: Wet granulator type SM 450/600-S5-2 Friction washer / friction separator type FW 560/3000 Transport screw Separation tank (float-sink separation) type TB 500 mechanical dryer type TM 1005 Extraction system type MFT 55/500 Fine Material Separator Type HS 500 E-circuit
Heating elements control unit -for: heating elements -Connection: from the electrode welding machine -Regulator and recorder -Handover in its current condition as inspected -in transport crate -Weight: 80 kg
Heating elements control unit -for: heating elements -Connection: from the electrode welding machine -Regulator and recorder -Handover in its current condition as inspected -in transport crate -Weight: 95 kg
Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: approx. 150 bar -Liter flow rate: approx. 30 l/min -Drive: 3 kW 1400 rpm -Dimensions: 520/360/H340 mm -Weight: 65 kg
Winder : Bandera Model W 400/1 Contact winder / surfacewinder Roll diameter max: 1200mm Roller width: 1200mm Roll width max: 1100mm Speed: max. 55m/min Longitudinal cutting device 2 or multi-lane Side Slitting Device Automatic roll change Cross-cutting device Role magazine Calibration device Low-friction rollers motor adjustment Adjustment range: for 500-1100mm laying width takeoff unit: Type TPE-1200 Side gusset insertion device Drive: 4-pole 4kW with axial fan Electric cabinet
SMU Unit without batteriepack, 3HAC14757-1/01, ABB, used-function assurance Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - had been in storage for quite some time, - is in very good condition and fully functional, Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case ...
Stedler SAM-BA-MAT E 500 Shrink Wrapping Machine Manufacturer: Stedler Type: SAM-BA-MAT E 500 Shrink Wrapping Machine Operating voltage: 230 V Connected load: 0.75 kW Dimensions: (LxWxH) 1500 x 1170 x 1300 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!
Unit without battery pack, 3HAC8365-1/01, ABB, used-function assurance Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - had been in storage for quite some time, - is in very good condition and fully functional, Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of di ...
Shrink sleeves Tunnel, for shrinking sleeves. Year of Make: 2002 Overhaul: partially overhauled 2020 Capacity: 6000 Units p. hour Without gearbox.
Laser Cooling Unit Manufacturer: Riedel Type: RW 27/0SR Year of construction:2017 Refrigerant: R134a
Stock # U2439-2 Used Erweka (DE) multi-task lab size set with drive AR400. Unit is driven by el motor 0.5 kW, 3000 rpm, 220 V, 50 Hz. Output rotation adjustable in range from 0-400 rpm. As a set there are included: - planetary mixer type PRS with agitators - frame, wall scrapper, hack type, whisk type. Including electrically heated mixing pan type DER. El heater power 500 W. Total volume of mixing pan about 6,5 l. - single piston homogeniser type HO with stainless steel electrically heated product hopper with volume about 2.8 l. Additional stainless steel hopper with volume about 3 l, and bypass stainless steel pipe. Output up to 30 kg/h. - Stainless steel vertical jacketed mixing tank type SG3W with belt driven 3 level paddle agitator. Bottom discharge. Total volume about 5 l. All devices last time had been working in cosmetic industry.
A total of 8 pieces available, price per table Pros: - Due to the narrow design of the base, good accessibility of the elements from all sides - Large adjustment range of the contact surface by extending the diamond-shaped pads - Tools and small parts always ready to hand on the shelf on the assembly tables - Support rails optionally covered with rubber, brushes, sliding strips or felt - No cable clutter when using the implement carriers: the machines are always ready to hand at the place of use Equipment: - Work surface covered with profile rubber - Diamond shaped supports in the edge area for placing profiles in the longitudinal direction - Height adjustable 900 – 1,100 mm
hydraulic unit, hydraulic pump, hydraulic pump -max. pressure: 200 bar -Liter output: 6 l/min per pump -Drive: 0.55 kW 1360 rpm -hydraulic tank -Number: 4x units available -Price: per piece -Weight: 95 kg
Hydraulic power unit, hydraulic pump, hydraulic pump -Hydraulic unit comes from a 15 t lifting platform -Max. pressure: 130 bar -Tank capacity: 100 liters -Motor: 7.5 kW 1450 rpm -Equipment: Emergency hand pump, hand valve, electric valve, emergency drain, -Dimensions: 1130/445/1320 mm -Weight: 334 kg
Attached to Europe pallet Auction-ID: A1-41275-196
Stock# U2439-3 Used Erweka (DE) multi task lab size set with drive AMD/EX. Unit is driven by el motor 0.37 kW, 920 rpm, 380 V, 50 hz. Ex design and is equipped with vari speed gearbox. Output rotation adjustable in range from 46-410 rpm. As a set there are included: - stainless steel three roll mill type SMS - rolls with width 107 mm x diameter 50 mm. Output in range 2-20 kg/h. - planetary mixer type PRS with agitators - frame, wall scrapper, hack type, whisk type. Total volume of mixing pan about 6l. - single piston homogeniser type HO with stainless steel product hopper with volume about 3 l. Output up to 30 kg/h. - universal drive arm type UG with device for mounting ceramic ball mill type KM 0, mill volume 0.5 l, includes ceramic milling balls. All devices last time had been working in cosmetic industry.
Stitching and folding unit MKW SFT 350; Condition as is; suitable for connection to MKW gathering machines or as a stand-alone; 2 Hohner 52/8 stitching heads; folding device; Front cut; 2.Knife; open format 10x14cm to 50x70cm, folded format 10x7cm to 50x35cm. Stitch-fold unit MKW SFT 350; condition as is; used for MKW machines or offline; two stitching heads 52/8; folding unit; front cut; secound knife; open size 10x14cm to 50x70cm, folded size 10x7cm to 50x35cm.
maximum number of results exceeded
please refine your search
50 € 
