uni used for sale

This 4-axis Mazak Integrex 30 Y Universal 1000 was manufactured in 1995. It features a maximum turning diameter over bed of 510 mm and a turning length of 1029 mm. The machine is equipped with a powerful main spindle and a milling spindle, providing versatile machining capabilities. If you are looking to get high-quality turning and milling capabilities, consider the Mazak Integrex 30 Y Universal 1000 turn-mill centre we have for sale. Contact us for further details.

Used labelling machine by Krones A. G. Herman Kronseder type Universella 723-931, new 1993. Specification: - number of discs: 15, - number of pallets in the aggregate: 8, - number of grippers in the cylinder: 6, - bander: large and small, - capacity 18,000 bottles/h, - several bottle formats, - side positioning of bottles.

Year of construction unknown Imprint suitable for Heidelberg MO Delivery date: immediately from stock Price on request. We deliver and install worldwide!

- Output: max. 3000 bts/h - With cork presence control, at the inlet - Cork dust blow-off onto bottle - With caps dispenser - With shrink head - Direction of rotation: left - right - Machine completely overhauled - Machine in very good condition

Four-sided planer Weinig Unimat 23 EL Working width 230mm Working height 160mm Head Arrangement: Bottom 5.5kw 4kw rights Left 5.5kw 4kw rights Mountain 11kw Bottom 5.5kw Mount 7.5kw Bottom 7.5kw Feed speed adjustable on variator 6-36m/min Feed driven by cardan shaft Driven rollers in the table Pneumatic clamps CE Certified Year of Build 2003 Net price

CATALOG NO. 7221 TECHNICAL DATA - min / max width of the workpiece 45 / 150mm - min / max height of the workpiece 15 / 50mm 3 spindles: 1) horizontal lower 11kW 2) horizontal upper 22kW (7000 rpm) 3) horizontal lower 5.5kW spindle diameter 40mm - spindle 1 and 3 manually adjustable up/down, right/left - 2 spindle, manually adjustable right/left - 2 spindle, electrically adjustable up/down - spindle 2 and 3 are equipped with brakes in advance: - 3 introducing, pulling, metal toothed rollers - 1 double output, pulling, rubber roller from down: - pressure on insertion - grooved top - pulling roller, metal, smooth - electric setting of planing thickness - smooth adjustment of feed speed 6-24m/min - 3kW feed motor - feed on cardan shafts - length of the introductory tabletop 1970mm - automatic tabletop lubrication system - diameter of the exhaust port 1x150mm, 2x ...

Auspacker, Fabr. BMS, type: Unipack 2.0 AP-H-0800, with 2 heads, built in 2017, already removed and stored.

Handfeeding station 8 stations gatherer automatic loading system Aster 180 sewing machine age 2008 Plus Stacker Technical details : minimum size : 150x100 mm maximum size : 420x320 mm speed : 180 cycles/minute available immediately

Working width: 1350 mm Number of sanding units: 1 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS Unitek wide belt sander Excel LC 1350 1N KRT --------------------------- 1-BELT MACHINE WITH COMBI UNIT ROLLER/SHOE FOR SOLID WOOD VENEER AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm 1350 - GRINDING BELT LENGTH mm 1370 X 2150 - MAX. WORKPIECE THICKNESS mm 160 - Steel CALIBRATION ROLLER mm 180 - GRINDING SHOE WIDTH mm 50 - BAND MOTOR POWER HP 15 - BELT SPEED m/s 18 - FEED MOTOR POWER HP 0.75 - Adjustment gear feed carpet with infinitely adjustable speed m/min 4/ 20 - HEIGHT ADJUSTMENT MOTOR HP 0.33 - Mechanical BAND OSCILLATION ECO GEAR PATENT SYSTEM” - 1 PC. DRUM BRAKE for belt braking - Swivel ROLLER for belt tension - 2 pcs. PRESSURE ROLLERS, with rubber coating - EMERGENCY STOP SWITCH EDGE in the inlet - ELECTRONIC DISPLAY ...

Working width: 950 mm Number of sanding units: 1 st. Workpiece thickness max.: 160 mm sanding belt measurements: 970 x 2150 mm Feed motor: 0,55 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 1350 mm Number of sanding units: 2 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 1350 mm Number of sanding units: 2 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SECOND-HAND VERTICAL SANDER WITH 2 BELTS OMA MOD. UNICA - transversal sanding on two sides of straight or shaped / curved elements - n. 2 motors for abrasive belts 7.5 hp each - n. 2 abrasive belts 3700x90 mm - Automatic feeding 4-20 m / min - minimum working length 320 mm - Max. piece height 130 mm - CE year 2001

SECOND-HAND CNC CONTROL COPYING BAND SAW MZ UNIDUE 013 - NUM control - n. 3 cnc axis - cutting section 1300x800 h 100 mm - angle of cut 90°+/- - wheels diameter 900 mm - volt. 380/50 - sn 06 - CE rules (year 1998)

SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - working length 3300 mm - tilting blades 45° - n. 2 motors 1.1 kw - blade diam. 330 mm - v. 380/50 - sn 96T233 - year 1996

SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - working length 3300 mm - 4.5 kw - blade diam. 330 mm - v. 380/50 - sn 99T318 - year 1999

SECOND-HAND COPYING BAND SAW MZ MOD. UNIVERSAL 013 - CE RULES - motor Hp 7,5 - wheel diam. 840 mm. - copying device - max cutting length 1300 mm - max cutting height 100 mm - cutting angle +- 45° - waste conveyor belt SMA - SN 08 - year 2002

Qty. 1 Second-hand steel strip production plant The plant consist of below lines: 20-High Sendzimir Mill Mfc.: Waterbury Farrel Built: 1960 Strip width: 330 – 660 mm Thickness Entry: 4.0 mm Exit: 0.076 mm 2-High Temper Pass Mill Mfc.: United Eng. & Foundry Co. Built: 1960 Strip width: 400 – 630 mm Thickness Entry: 1.6 mm Exit: 0.25 mm Tension Leveller Mfc.: TBA Built: 1982 Strip width: 500-1067 mm Thickness: 0.08-0.3 mm Tensile strength: 30-75 kg/mm² Bright Annealing Furnace Mfc.: Salem & Herr Equipment Built: 1960 Strip width: 150 – 610 mm Thickness: 0.254 – 2.7 mm

Key data: 1100 , 40

Screw diameter; 40 mm Injectable volume: 201 cm3 Injection pressure: 1859 bar Turntable: 1040 mm Mould thickness min: 300 mm max: 600 mm Cores: 3 Robot Interface: Yes Mold Heating Zones: 8

Key data: 5 , 230 mm, 130 mm

I sell the Weinig Unimat 300 four-sided planer, built in 2004 Feed speed 5-30 m/min. Working width 230mm Working height 130mm 5 Spindle Configuration: bottom - right - left - up - down Combined power 28kW 3-zone pneumatic pressure Good condition. Fully operational! Available soon. Includes full documentation and CE certification.

SPECIFICATIONS Pilot plane on the entrance side: 2000 mm Grooved table Machinable width: max. 180 mm Machinable height: max. 150 mm Spindle diameter: 40 mm Shaft drive Drive shaft power: 4.0 Kw Soundproof booth Spindle Configuration: I Shaft: Bottom 4.0 kW II Shaft: Right 4.0 kW III Shaft: Left 5.5 kW IV Shaft: Right 5.5 kW V Shaft: Top 11.0 kW VI Shaft: Bottom 4.0 kW VII Shaft: Top 11.0 kW VIII Shaft: Universal 4.0 kW

accuhead machine for containers up to 40 ltr. Extruder 90/24D. accuhead 6 ltr. Clamping force 350 kN. Cables partially renewed. Oil tank and pipes cleaned. New control system is prepared (B&R) and can be installed at short notice

Collet set 15 pieces with drill chuck Vertical Drilling and Milling Head - T-Slot Width 12 mm Cutter head Coolant Setup x - travel 500 mm y - travel 200 mm z - travel 400 mm Feed: 5.6 - 238 mm/min with quill stroke Speed: 35.5 - 1800 rpm with rapid traverse Clamping area: 800 x 300 mm Total power requirement 16 A Spindle holder ISA 40 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

Samco Unilev 15 edge sander Tape dimensions 150 x 2170 mm Two belt speeds Adjustable Boot Table top adjustable at 0-30 degrees Adjustable sanding height Pneumatic tensioning of the sanding belt Sanding belt oscillation Motor power 3kw

Weinig Unimat 23 four-sided planer Working width 230mm Working height 160mm Number of spindles 5 Spindle arrangement Bottom 5.5kw Rights Left 7.5kw Top 11kw Bottom 5.5kw Pneumatic material clamps divided into 4 sections Feed speed adjustable by variator 4-24m/min Input table length 1980mm Drive on cardan shafts Thick soundproof cab Machine dimensions 380x226x178cmH CE Certified

turning diameter: max 300 mm turning length: max. 2000 mm control: Siemens Serie 810D turning spindle: Durchlass 90 mm : 300 mm Feed speed: 6/6 m/min. number of tools: 8 quill stroke: 300 mm diameter of quill: 105 mm taper MK: 6 coolant tank: 100 l total power requirement: 15 kW weight of the machine ca.: 4650 KG dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 16 cooling units are available. All 16 cooling units fit into a 40Hc container for transport.

Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 17 cooling units are available. All 17 cooling units fit into a 40Hc container for transport.

spindle diameter 130 mm - ISO 50 tool - rated power of the spindle rotation motor 18.5 kW - installed power 4 0kW - spindle drive motor speed range 722-1455 rpm - spindle rotation range 2.25-900 rpm, 27 degrees - disc rotation range 2.25-180 rpm, 18 degrees - X axis feed speed range 0-5000 mm/min, stepless - Y axis feed speed range 0-5000 mm/min, stepless - Z axis feed speed range 0-3150 mm/min, stepless - B axis feed speed range 0-4000 mm/min, for Ø1m, steplessly Bg2Ltmk8Gq - machine weight 30 t

REF-2366 TATOMA MT-13-E HORIZONTAL UNIFEED MIXER 6000KG WITH LOAD CELLS Horizontal unifeed mixer for solids with load cells Manufacturer: TATOMA Type: MT-13-E Serial no.: 1000 Year: 1998 Capacity: 6,000 kg Volume: 13 m3 ABB motor: 75 HP/55 kW. 1,500 rpm Tank dimensions: length 4,450 mm, width 1,780 mm Outfeed height: 700 mm Overall dimensions: length 6,500 mm, width 2,300 mm, height 2,700 mm CE marking

This 6-axis Universal Robots UR10e was manufactured in 2023. It features a reach of 1,300 mm and a payload capacity of 12.5 kg, making it suitable for various applications. The robot is equipped with an integrated 6-axis force/torque sensor and comes with a Smooth Robotics Welding Integration Kit. If you are looking to get high-quality welding capabilities, consider the Universal Robots UR10e collaborative robot we have for sale. Contact us for further details.

UNIVERSAL ROBOTS UR5 CB2 NEW

UNIVERSAL ROBOTS CB3 Teach Pendant NEW

Danmatic Spray unit spray glazing machine 2017, stainless, spray glazing machine, belt dimensions 2150mm x 820mm, stainless mesh belt, four top mounted spray jets, adjustable pressure controls, can work with a great variety of liquids from pure water to oil and glaze egg, mobile, 3Ph

charge load: - Cleansing load time: - internal dimension: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Univap TCM/E 5ED Evaporator with electric defrost unit 2021, Evaporator with electric defrost unit, comes with controls and external KD external fridge plant

Key data: 102 mm, 1530 mm, 900 mm

Spindle diameter Ø 102 mm Taper ISO 50 Horizontal spindle travel 710 mm Cross travel (X) 1,530 mm Vertical Travel headstock (Y) 900 mm Longitudinal travel (Z) 1,500 mm Table 1,250 x 1,400 mm R.P.M. 8 – 1,600 (18x) kW 11 Volts 380 Cycles 50 Including: Digital readout

Offered is a CNC portal machining center with multiple clamping. Equipped with a large clamping table, several workholding fixtures, numerous hose connections and protective curtains on the machining portal. Inspection possible by arrangement.

Key data: 102 mm, 1600 mm, 900 mm

Spindle diameter Ø 102 mm Taper ISO 50 Horizontal spindle travel 710 mm Cross travel (X) 1,600 mm Vertical Travel headstock (Y) 900 mm Longitudinal travel (Z) 1,520 mm Table 1,250 x 1,400 mm R.P.M. 8 – 1,600 (18x) kW 11 Volts 380 Cycles 50 Including: 3-axis Digital readout with point to point control Heidenhain 310

surface area: 700 250 mm no. of flutes: 5 groove width: 12 mm total power requirement: 0 kW weight of the machine ca.: 75 kg dimensions of the machine ca.: 700250320 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 102 mm, 1600 mm, 1250 mm

Spindle diameter Ø 102 mm Taper ISO 50 Horizontal spindle travel 710 mm Cross travel (X) 1,600 mm Vertical Travel headstock (Y) 1,250 mm Longitudinal travel (Z) 1,500 mm Table 1,250 x 1,400 mm Table load 5 ton R.P.M. 4 – 1,250 (18x) kW 23 Volts 380 Cycles 50

Heidenhain TNC 426 Table 1600 x 2000 mm Max. load 12.500 kg Spindle diameter 130 mm Taper ISO 50 Cross travel (X) 3,500 mm Vertical travel headstock (Y) 1,600 mm Longitudinal travel (Z) 1,250 mm Horizontal spindle travel (W) 850 mm RPM 4 – 1,120 kW 45 Volts 380 Cycles 50 Including: Facing head Ø 720 mm Facing head slide travel 240 mm Machine weight 31,1 ton

Control Heidenhain TNC 426 Mach.no. 11648 Table 1,600 x 1,250 mm Spindle diameter 130 mm Taper ISO 50 Cross travel (X) 2,000 mm Vertical travel headstock (Y) 1,600 mm Longitudinal travel (Z) 1,050 mm Horizontal spindle travel (W) 850 mm RPM 4 – 1,120 kW 45 Volts 380 Cycles 50 Including: Machine weight 26,3 ton

Autom. tube filling machine for metal tubes. Machine incl. the following accessories: heatable product container, stirrer, coding device etc. Furthermore 4 pcs. format parts for tube Ø: approx. 13,5, 28, 30 and 35 mm. PLC TELEMECANIQUE.

Dräger Protection Unit 6904409 complete unit Year of construction 2013 The item is technically in good condition, Nevertheless, this is a used items, which shows signs of wear, or may have.