uni used for sale

Auction-ID: A1-50275-43

General Description TRUMPF laser cutting head assembly (Schneideinheit) for FIBER laser cutting systems. The unit is designed as a replacement cutting head for TRUMPF TruMatic/TruLaser machines equipped with TruFlow laser resonators. The assembly includes the autofocus unit, height sensing system, gas connections and electrical interfaces. Technical Details Manufacturer: TRUMPF Component: Laser cutting head (Schneideinheit) Material No.: 2014986 Serial No.: Partially visible Compatible with TRUMPF laser systems Integrated autofocus drive Height sensing unit Pneumatic and electrical connections Condition: Used Condition Complete assembly supplied in the original protective packaging. Connectors and housing appear intact with minimal cosmetic wear. Lens condition, focus cartridge, cooling circuit and operational status have not been tested. Delivery Available immediat ...

EDI system mounted on steel frame for the fully automatic production of ultrapure water. Normally, the system is operated following a UO system. The plant consists essentially of: 1.The EDI system consists of 3 parallel stacks of the type MK2E (total of 6 stacks and 2 centrifugal pumps). Both roads are mounted on a common frame. one below, the other above in the frame. 2. Piping and EDI cells 3. Fittings, flow meters and centrifugal pumps

System separator type BA300 System separator - Ductile iron with backflow preventer on input and output side, 3 ball valves, drain valve Flanges according to DIN EN 1092-2 for safeguarding drinking water systems against backpressures, backflow and back suction, for residential buildings, industrial and commercial purposes, horizontal installation position with drain valve downwards, discharge volume in case of failure: 35 m3 / h, 3 ball valves for connecting a differential pressure gauge

Double softening system consisting of: - 2 GRP pressure vessels (Pentair) - 2 control heads (1 control head must be renewed) - 1 sole tank - Control unit MMP 81 (Gebrüder Heyl) - Piping with pneumatic diaphragm valves The plant is dismantled and stored in Warburg.

Auction-ID: A1-40982-1

Control: CNC Table size (LXW) 920x280mm Max workpiece weight: 250kg Auction-ID: A1-40982-62

Mobile welding machine with wall-mounted swivel arm with control unit length approx. 6 meters Auction-ID: A1-50251-15

Control Conventional Horizontal/vertical Horizontal and vertical Table length [mm] 1520 Table width [mm] 385 Main spindle power [kW] 11 Auction-ID: A1-40982-93

Mobile welding machine with wall-mounted swivel arm with control unit length approx. 6 meters Pick up is possible by appointment. After the auction closes, you will be contacted to make this appointment. Auction-ID: A1-50251-593

Number of axles [pcs.] 3 X-axis travel [mm] 800 Y-axis displacement [mm] 450 Z-axis travel [mm] 500 Table length [mm] 1050 Table width [mm] 625 Tool holder ISO40 Min. spindle speed [rpm] 32 Max. spindle speed [rpm] 1600 Options Digital readout └ Type of digital readout Heidenhain Auction-ID: A1-40982-38

Sameka SAM 65, No Fab 3504, Hydraulic power unit Auction-ID: A7-50270-192

Mobile welding machine with wall-mounted swivel arm with control unit length approx. 6 meters Auction-ID: A1-50251-17

Consisting of exhaust fan and return air system with inlet and exhaust ducts Horizontal tube length approx. 20 meters Pick up is possible by appointment. After the auction closes, you will be contacted to make this appointment. Auction-ID: A1-50251-5

Cabinet dimensions: 120 x 50 x 195 cm. Cabinet key is not included. Printer dimensions: 58 x 45 x 30 cm. Dimensions drawer units: 46 x 73 x 56 cm. Auction-ID: A1-50251-104

Has a defect in X-axis magnetic linear field. This needs to be repaired. Number of axles [pcs.] 3 B-axis rotation [°] 105 Table length [mm] 3.100 Table width [mm] 900 Auction-ID: A1-40982-4

Mori Seiki DuraVertikal 5080 3Axis Machining Center (11/2006) Manufacturer: Mori Seiki Type: auto_awesome Source language: English 587 Table length 1350 mm Table width 600 mm Number of T-profiles 6 T-profile width 18 mm Max. table load 1000 kg Longitudinal travel (x-axis) 1050 mm Transverse travel (y-axis) 530 mm Travel (z-axis) 510 mm Max. tool diameter 125 mm tool weight 8 kg Spindle nose bt 40 Distance spindle nose table 150 - 660 mm By 0 rpm Until 10,000 rpm Voltage 50 Hz 3x 400 volts Spindle performance 22 kW Total power requirement 58 kVA Machine weight approx. 8,030 kg Length 2,500 mm Width 2,350 mm Height 2,700 mm Give feedback Translation results available Year of manufacture: 11/2006 Condition: used, good, in production Incl. tools in the turret Auction-ID: A7-50270-26

Mobile welding machine with wall-mounted swivel arm with control unit length approx. 6 meters Auction-ID: A1-50251-263

Has problems with startup/control, problem unknown Vertical 3 Axles Main spindle power [kW] 2.2 Digital readout Auction-ID: A1-40982-55

Auction-ID: A1-40982-73

Table length [mm] 1100 Table width [mm] 250 Number of axles [pcs.] 3 Auction-ID: A1-40982-71

There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-49784-55

Hydraulic pump unit Equipped with Galtech valve block and 4 levers Auction-ID: A1-50251-463

Mikron VCE 1600 Pro Type VCE 1600 PRO Year of construction 2014 Control CNC Heidenhein iTNC 530 Country of origin Switzerland Technical details x-travel 1,600 mm y-travel 900 mm z-travel 800 mm Control Heidenhein iTNC 530 Table size 1,700x850 mm Inclusion ISO ISO 40 Speed 14,000 rpm Tool Random 40 pos. Table load 2,000 kg Rapid traverse: 24 m/min Internal cooling supply 20 bar Total power requirement 18 kW Machine weight approx. 18,600 kg Pick-up date will be announced after the auction ends. Machine is loaded with a truck-mounted crane. Without screwing rods, zero clamping system and tools. A whole truck is required for transport, width 3m and interior height 3.2m Transport dimensions of the machine body (L x W x H): 4,500 x 2,900 x 3,200 mm, weight: approx. 20 tons Auction-ID: A7-50270-31

CONTROLS   Point-to-point control (NC) HEIDENHAIN TNC 124 WORKING RANGE -CUBIC-   X-axis travel: 600 mm   Y-axis travel: 400 mm   Z-axis travel: 400 mm TABLE   table surface (left-right): 800 mm   table surface (front-back): 425 mm   workpiece load (max): 250 kg SPINDLE / HEAD   spindle revolutions (max): 4500 /min   tool fixture: ISO SK 40   drive power: 7.5 kW ELECTRICAL SPECIFICATIONS   mains power supply: 13 kVA DIMENSIONS / WEIGHTS   space requirements -left/right-: 2720 mm   space requirements -front/back-: 1850 mm   total height: 2300 mm   total weight approx.: 2025 kg ca 2000 h

CONTROLS   Point-to-point control (NC) HEIDENHAIN TNC 128 WORKING RANGE -CUBIC-   X-axis travel: 610 mm   Y-axis travel: 400 mm   Z-axis travel: 450 mm TABLE   table surface (left-right): 800 mm   table surface (front-back): 425 mm   workpiece load (max): 300 kg SPINDLE / HEAD   spindle revolutions (max): 4500 /min   tool fixture: ISO SK 40 DIMENSIONS / WEIGHTS   total weight approx.: 2300 kg ATTACHMENTS   coolant unit: yes   closed cabin: yes   European CE standards: yes Approx. 1,000 operating hours. The Bench vise can be purchased optionally.

x-travel: 600 mm y-travel: 400 mm z-travel: 320 mm table-size: 900 x 420 mm control: konventionell tool adaptor: SK40 turning speed range: 35,5 - 1800 U/min quill stroke: ja mm total power requirement: 5,0 kW weight of the machine ca.: 1,45 t dimensions: 1,6 x 1,2 x 1,9 m Features: - Digital display - Coolant system - Milling head with quill The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table surface area: 720 x 410 mm spindle turning speed range: 40 - 2000 U/min : mm/min feeds Z-axis: mm/min tool taper: SK 40 total power requirement: 3,0 kW weight of the machine ca.: 1,4 t dimensions: 1,8 x 1,6 x 1,9 m Milling machine with - Toolmakers table - Heidenhain digital readout - Rapid traverse - Coolant system - Central lubrication - Machine feet - incl. drawer unit with contents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-50275-76

Universal Milling Machine Operating hours 2672 according to meter Universal milling head can be swivelled 360° Mounting SK 30 Table eyelet 900 × 300 mm with three T-slots Including machine vise Machine in very good condition immediately ready for use Auction-ID: A1-50529-6

Thread cutting unit Suhner Tapmaster, serial no.: 623302-00101/12 Auction-ID: A1-50529-228

Factory No.: D 200739 Rated voltage 230V 50 Hz Total cooling capacity 1490 W Temperature range 20 - 55° C Year of construction 12/072012 Weight 30 kg Auction-ID: A1-50529-26

Year of construction 18.11.2003 Factory No.: D 7489 Rated voltage 230V 50 Hz Temperature range 20 - 55° C Weight 13 kg. Auction-ID: A1-50529-32

Stroke per jaw: 6 mm, Clamping force: 580 N, Opening force: 640 N Auction-ID: A1-50529-600

Universal milling head SK 40, presumably from Huron universal milling machine Auction-ID: A1-50529-224

Threading unit Suhner Tapmaster GEM 20, serial no.: 3132, as good as new, in original packaging with documents Auction-ID: A1-50529-229

Hydraulic unit comes from a Waldrich long planing machine Weight 400Kg LxWxH 1200 x 800 x 1200mm Condition: untested (6) Auction-ID: A7-50523-920

Unimog 403A Agricultural design Ready to drive without TÜV as a spare parts carrier / restoration Registration date: 1970 Engine is running. large gearbox installed! Top speed: 74 km/h Front and rear PTO - Tilting cylinder - Zugmaul Rockinger - Hydraulic connections:   Rear: 2 pieces forward + return   Front: 4 pieces forward + return Operating hours / kilometer 22811 Viewing by arrangement, questions will be answered by email Auction-ID: A1-50529-2

Composed of: ATLAS COPCO - G A15 compressor, approx. dimensions: 780 × 1300 × 1250 mm Year: 2020 Power: 3 kW Operating pressure: 10 bar ATLAS COPCO Compressor - GA15VSD, approx. size: 640 × 650 × 1450 mm Year: 2019 Power: 15 kW Operating pressure: 13 bar ATLAS COPCO FX 7 chiller, with R 134A coolant, approx. 400 × 500 × 800 mm in size TANK NOT INCLUDED. Auction-ID: A7-50524-875

Vogelsang static Unifeed hopper with a capacity of approximately 40 m³ (40,000 litres), equipped with three counter-rotating mixer augers, weighing system using load cells, motors and gearboxes, level and temperature sensors, pressure gauge, hydraulic circuit, instrumentation and electrical components. The equipment was used for the reception of solid waste, such as sludge, eggs, and other by-products. It was removed in 2019 and was working properly at the time of its removal. It is currently stored in the plant's yard and shows significant signs of deterioration due to oxidation in the metal chassis, as well as deterioration of the hydraulic circuit. Due to the downtime, motors, transmissions, planetary gearboxes, bearings, augers, electrical elements and instrumentation require a complete overhaul and in-depth maintenance before putting the equipment back into operation. The hopper ...

Stroke per jaw: 6 mm, Clamping force: 580 N, Opening force: 640 N Auction-ID: A1-50529-601

Thread cutting unit Suhner Tapmaster, serial no.: 616466-00201 Auction-ID: A1-50529-227

Built-in control unit Type: BUS6-VC-EC-0016 Art. Item No.: 232691 Auction-ID: A1-50529-37

x-travel: 760 mm y-travel: 381 mm z-travel: 450 mm quill stroke: 152 mm table-size: 1300 x 305 mm control: Heidenhain TNC 360 tool adaptor: SK40 turning speed range: 100- 4.000 U/min rapid speed: 5000 / 7000 m/min feed speeds: 2,5 bis 3000 mm/min power requirement: 2.2 kW diameter of quill: 101 mm total power requirement: 15,0 kW weight of the machine ca.: 2,4 t dimensions: 2,4 x 2,3 x 2,2 m Equipment: - Heidenhain TNC 360 - Coolant system - Hydraulic tool clamping - Milling head with quill - Machine light - Chip tray - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stephan UMC5 Universal Machine used Stepless speed Bowl capacity: 5 litres Double coat Frequency Inverter 300-3000rpm Knife insert good condition with vacuum pump and temperature control unit Pointer of the pressure gauge is crooked, does not affect the function should be thoroughly cleaned before use. It is fully functional and runs neatly and smoothly. Video about test run available

Hydraulic pump unit Part Number : Moog - D954Z8001 Arburg - A10VDC 18 DFR1/31R The spare part is in good condition Nevertheless, this is a used items, which shows slight signs of wear, or may have.

Mint condition It was only used briefly as a demonstration device Like new Original price 4800,00€ Auction-ID: A1-50540-125

Good condition Auction-ID: A1-50540-146

Universal Thermal Blender, Heating / Cooling incl. 1 replacement container Auction-ID: A1-50564-14

Pump output infinitely adjustable via variable speed gearbox Auction-ID: A1-50564-55