uni used for sale

will be loaded in a package Auction-ID: A7-45452-70

Auction-ID: A7-45452-17

will be loaded in a package Auction-ID: A7-45452-67

will be loaded in a package Auction-ID: A7-45452-78

will be loaded in a package Auction-ID: A7-45452-66

will be loaded in a package Auction-ID: A7-45452-75

will be loaded in a package Auction-ID: A7-45452-79

CHILLER ✔️ Brand: Carrier ✔️ Model: 30XA ✔️ Year: 2012 ✔️ Fluid: R134a ✔️ Load: ~134 kg ⚙️ Key features: Power consumption: ≈ 312 kW Max amperage: ≈ 522 A Power supply: 400V – Three-phase – 50 Hz Weight: ≈ 6723 kg

CONTROLS   CNC controls HEIDENHAIN MILL PLUS WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 5   X-axis travel: 500 mm   Y-axis travel: 420 mm   Z-axis travel: 380 mm SPINDLE / HEAD   spindle revolutions (max): 18000 /min   tool fixture: HSK A63 AXIS DRIVES   feed velocity (max): 20000 mm/min   rapid traverse: 50000 mm/min TOOL MAGAZINE   number of positions: 60 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2500 mm   space requirements -front/back-: 2600 mm   total height: 2440 mm   total weight approx.: 6000 kg ATTACHMENTS   zero-point workholding system: yes   chip conveyor: yes   coolant unit: yes   band filtration unit: yes   through spindle coolant attachment: yes   closed cabin: yes   European CE standards: yes Total spindle  ...

Description Rarity for retrofitting and upgrading existing Stahlfolder folding machines or folding units 1st folding unit BUH 66-6 semi-automated from 2006 – upstream knife shafts with protective cover (conversion kit suitable for folding units) – motorized folding roller adjustment – six manually adjustable folding pockets 66cm infeed width – double downstream knife shafts with lift kit

Slotted Hole Drilling Machine MABO (I) UNIC 0070 Year 1995

VoIP phones UNIFY OpenStage 60T approx. 8 pcs., small quantity handsets SIEMENS

Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed, lowering column -Manufacturer: Nucleus, Absen column 35 for ultrasonic welding machines -Eco FR361101 -Servo motor: Dunkermotoren GR 42x40, voltage 24 V -Receiver: Shaft Ø 20 x 18 mm see photo -Dimensions: 270/230/H85 mm -Weight: 2.5 kg

Working area 1Longitudinal700 mmCross420 mmVertical380 mmGeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWClamping System ISO 7388-3 - JD30Spindle taper BT 30Speed range 20 - 10000 rpmTorque (40% DC) 48 NmTorque (100% DC) 41 NmIntegrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Inclusive Software package Sinumerik Mdynamics 5-axRotary joint, 4 channelsRotary joint for integrated swivel rotary table with torque drives 4- channe ...

The machine is in good technical condition, after prior agreement it is possible to test it. We offer the grinder separately, without extraction and track. For straight round or oval pipes.

The machine is in good technical condition, testing is possible by prior arrangement.

Hydraulic power unit comes from a Waldrich long planing machine Weight 400Kg LxWxH 1200 x 800 x 1200mm Condition: unchecked (6) Auction-ID: A7-45761-796

For sale is a high-quality universal tool milling machine from the renowned Swiss manufacturer Mikron, model WF 2 SA. The machine impresses with its high precision, stable construction and versatile applications and is in a well-maintained and functional condition. Ideally suited for toolmaking, single part production, repair work and training companies. General information: Machine Type: Universal Tool Milling Machine Manufacturer: Mikron Model No.: WF 2 SA Year of construction: approx. 1985 Condition: Used, well maintained, fully functional Availability: Immediately available Technical data: Travel (X/Y/Z): approx. 420 / 250 / 340 mm Table size: approx. 635–700 × 250 mm Spindle speed: 50 – 2,240 rpm Tool holder: SK40 (ISO 40) Feed: infinitely variable Rapid traverse: approx. 1,400 mm/min Motor power: approx. 3.5 kW Machine data: Weight: approx. 1,0 ...

Counter with heating and cooling unit EMAINOX ILS3, S/N A140094400004, 230 V, cooling unit 3 levels, total approx. 250 cm

Speed: 355-1800/min, nominal voltage: 380V, 50Hz, 3 AC, control voltage: 220/24V, protection class: IP54, nominal current: 100A, control: Heidenhain TNC 355, weight: 2.95t, with handwheel, coolant system, hose nozzle, hydraulic/lubrication unit, pressure accumulator/ hydraulic accumulator, solenoid valves, Bosch components and ORSTA directional control valve. An on-site inspection is possible.

Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!

Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!

Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!

CNC cylindrical grinding machine, (carousel) for internal, external and surface grinding. A lot of accessories, such as grinding wheels of different types and sizes. Retrofitted 2007 . Magnetic clamping plate dia 1500mm, Circumferential diameter 1800mm, Largest grinding diameter 1600mm Maximum grinding height 880mm Max. workpiece weight 5to Swivel angle of the grinding spindle: 90° left, 60° right

LARA DEMAE-10000/100/1400-D feeder/unwinder/straightener – Year 2018. Reviewed, ready for production. Complete feeder from coil, integrating unwinding, straightening and servo-driven feeding in a single compact unit. Designed to work continuously on cutting, stamping or drawing lines, with high precision and reliability. Robust equipment, ideal for carbon steel, stainless steel and aluminum. Composed of: Motorized hydraulic winder, combined straightener-feeder and integrated electrical and hydraulic system. Main technical data: -Maximum strap width: 1,400 mm -Sheet thickness: up to 3 mm (carbon steel/aluminum) up to 1.5 mm (stainless steel) -Power supply: 400 V / 50 Hz -Hydraulic pressure: up to 130 bar

Temperature control unit REGLOPLAS 150 ST/6/TP20/2K/RT22, S/N 103670

Temperature control unit GWK TECO CS 90 Bj. 2002, S/N 12166

Temperature control unit GWK TECO CS 140 year 2008, S/N 20314, internal No. 50

Temperature control unit GWK TECO CS 140 year 2008, S/N 15721, internal No. 35

Temperature control unit GWK TECO CS 140 year 2005, S/N 14526, internal No. 30

Bypass filter unit C10-110, volume flow 20-110 l/min, 380V, transport trolley

Granule dosing unit KOCH, paint mixer, control

Temperature control unit GWK Teco CS 90 built in 2003, S/N 13248, internal No. 12

Temperature control unit GWK Teco CS 140 E year 2018, S/N S10017130, internal No. 8

Temperature control unit GWK Teco CS 90 E year 2017, S/N S10009675, 9.5 kW, internal 99

Pneumatic punch UNIMATIC punching device built in 2011, S/N 93010, pneumatic, on rolling block

Temperature control unit E. BRAUN BT9W heater 6/9 kW built in 1999, S/N 2549, internal No. 2

Temperature control unit GWK TECO CS 140, internal No. 39

Temperature control unit E. BRAUN BT9W heater 6/9 kW built in 1999, internal No. 10

WITTMANN Tempro Basic 90 temperature control unit, nameplate not visible

WITTMANN Tempro 2 temperature control unit, nameplate not visible

Temperature control unit GWK TECO CS 160 built in 2006, S/N 16035, internal No. 27

WITTMANN Tempro 2 Type TN2A3A1B00000100, S/N 100 temperature control unit

Temperature Control Unit GWK TECO CS 140T Year 2012, S/N 261087-02-02, Internal No. 83

Temperature control unit GWK TECO CS 90 built in 2003, 9.5 kW, internal No. 26

Temperature control unit HB-THERM Series 4 type HB-100U1 built in 2008, S/N 810-5700, max. 30 kW

Temperature Control Unit HB-THERM Series 4 Type HB-100U1 Year 2007, S/N 712-2053

UNI-CARRIERS ULS89008/01 electric reach truck, load capacity 1,200 kg, lifting height 5,700 mm, not ready for use

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Rexroth, hydraulic power unit, hydraulic station -Type: Rexroth AHAG -Pressure: 250 bar -Flow rate: 42 l/min / 2 working circuits -Motor: ABB 11 kW / 1455 rpm -Hydraulic reservoir: Tank capacity 160 l with level indicator -Return filter: RFBNHC 330F10 A1.X -Pressure reservoir: Hydac, capacity 10 l -Individual components: see photos -Dimensions: 1340/680/H1500 mm -Weight: 484 kg

A vibration and hose filter system Vaupel is available. Air volume flow: 3200m³/h, motor power: 3kW, speed: 2300rpm, filter area: 9m². An on-site inspection is possible.