126,718 used machines on RESALE, but how to find them? Machine Search
NEW 10x Sandvik Coromant Inserts R390-170408M-PM 1030 Area of application of the plates: P and M
Housing Unit, Two-Hole Flange Bearing Housing Unit, Flange Bearing INA PCJT 30 10pcs ! housing: 01CJT08 insert bearing: GYE 30 KLLB-C FA115 shaft diameter: Ø 30 mm Dimensions (single bearing): 142 x 80 x 42 mm New ! Dimensions (Packing): 400 x 150 x 90 mm
Underfloor drilling unit suitable for IMA - incompatible with a Weeke plug
Housing Unit, Two-Hole Flange Bearing Housing Unit, Flange Bearing EBS UCFL 207 8 pieces ! housing: FL 207 insert bearing: UC 207 shaft diameter: Ø 35 mm Dimensions (single bearing): 160 x 90 x 65 mm New !' Dimensions (Packing): 300 x 180 x 160 mm
Universal Mixer Stephan Bäcker Boy BB100 - Baker Mixer Stephan - Model Baker Boy BB100 - 100 litres - 11 kW - 24.5 A - 380 volts - Shell diameter: ø65cm - Boiler interior height: 39cm
Housing Unit, Two-Hole Flange Bearing Housing Unit, Flange Bearing INA PCJT 45 2 pieces ! housing: CJTR09 insert bearing: GLE 45 KRRB FA115 Shaft diameter: Ø 45 mm Dimensions (single bearing): 180 x 110 x 50 mm New ! Dimensions (Packing): 180 x 110 x 100 mm
Universal clamping table, swivel, tilt and swivel table, T-slot plate PAGUS clamping surface: 630 x 270 mm 5 grooves groove width: 12 mm table can be tilted back and forth from 90°, tilted back and forth by 30° table can be tilted left and right by 15° and swivelled to the left and right by 45° New !' Dimensions: 650 x 290 x 290 mm
Key data: 160 mm, 2 kW, 1770 m³/h
mobile chip extraction system AL-KO FMRG 1/160 Manufacturer Part Number: 4172370/2
used
For sale is a used Nordson Problue 10 hot melt machine
used
For sale is a used Nordson Problue 4 hot melt machine. Various application heads as well as hot glue hoses (new and used are available)
- Manufacturer: Winterhalter - Type: GS660 - Heating capacity: 12.0 kW - Connected load: 15.8 kW - Rated current: 25.5 A - Water pressure: 250 - 600 kPa - Water temperature: max. 60°C Dimensions: Width: 137cm Depth: 86cm Height: 177cm
x-travel: 1000 mm y-travel: 500 mm z-travel: 700 mm table surface area: 1250 x 700 mm spindle taper ISO: 50 spindle turning speed range: 20 - 3200 U/min quill stroke: 100 mm semi-automatic operated: Phillips 432 Number of working hours: 62.340 h main drive motor: 22 kW total power requirement: 27 KVA weight of the machine ca.: 7,7 t base area: 3,8 x 4,1 x 2,4 mm accessories:: hydr. Schraubstock X axis, longitudinal 1,000 mm Y axis, vertical 500 mm Z axis, cross 700 mm Min./max. distance from vertical spindle to table top 138 / 600 mm Overhang max. approx. 800 mm Spindle taper SK 50 with inner cooling Spindle speeds (infinitely variable in 2 steps) 20 - 3,200 rpm Feed motion YXZ 1 - 3,000 mm/min Rapid traverse XZ 6,000 mm/min, Y = 5,000 mm/min. Rotary axis as 4th axis with housing of the working area The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...
Key data: 1200 mm, 600 mm, 500 mm
Dialog 11 Control Travels 1200 x 600 x 500 Max. spindle speeds 5000/rpm Spindle drive 12 kW Tool holder SK40 Quill stroke 80 mm, weight approx. 7000 kg. Accessories el. Handwheel, coolant device. The machine is in very good condition.
Bobst Cube / monitor with control unit for transfer station, Bobst Alpina 110 II matic. Used and tested. Bobst cube / monitor with control unit for transfer station, Bobst Alpina 100 II matic. Used and tested. BSA07320000TG / H12P+P50S1
table diameter: 160 mm table load: - table height: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
modular compressed air maintenance unit PARKER Maintenance unit with filter, pressure regulator, stopcock Filter with pressure regulator P3KEA14ESABNGP Stopcock P3KVA14LN Oiler can be filled under pressure P3KLA14LSMN Inlet pressure up to 17 bar Control pressure 8 bar Connection 1/2" Wall bracket
Magnetic swivel table as shown in the pictures. Further information on request
modular compressed air maintenance unit PARKER Maintenance unit with filter, pressure regulator, stopcock Filter with pressure regulator P3KEA14ESABNGP Stopcock P3KVA14LN Inlet pressure up to 17 bar Control pressure 8 bar Connection 1/2" Wall bracket
Universal cylindrical grinding machine for external and internal grinding with accessories Features: - Automatic grinding cycles - X/Z axes electrically controlled - Table can be swivelled up to 30° - Swivelling grinding head - Short changeover times from external to internal grinding - Easy to use - Compact design Hours: 12936 Weight: 2300Kg Technical data: see picture Further details on request
Capacity (max.): 600 pieces/h Connected loads: 220/240 V, 50/60 Hz, 17.5 A Machine dimensions (LxWxH):1520 x 790 x 1090 mm Machine weight: 160 kg Rated power: 3,700 W Rated current: 17.5 A Min. product weight : 0,05 kg Max. product weight: 15 kg Max. film width: 600 mm Max. film roll diameter: 300 mm Film roll core diameter: 77 mm Film thickness: 10-50 μm Availability: immediately Condition: well-maintained, in working order
Low mileage, Refrigerant R134a GWP 1430, Capacity 1475 g, Cooling capacity 3 kW at 20 °C and 32 °C ambient temperature, Connection voltage 400 V - 50 Hz, Current consumption max 5 A, Condenser: air-cooled, Dimensions: 480 x 400 x 800 mm, Weight: 60 kg Accessories: retaining plate for fastening,
Item condition: well-maintained Availability: immediately 6 pneumatic filling guns: not available Filling nozzle holder: no Lift-off: not available The area marked in red in the drawing is not present
Inv. Num. : 8185 Type: FP 3 NC Producer: Deckel Generated: Parameters: Work table length: 700 mm Work table width: 460 mm Maximum vertical spindle speed: 4000 1/min X-axis travel: 400 mm Y-axis travel: 400 mm Travel Z axis: 340 mm Machine height: 1800 mm Machine length: 2000 mm Machine width: 1400 mm Machine weight: 1900 kg
2-Stage-Reverse Osmose System. Capacity: 27.000 liter/hour. See documents for technical description, component list and 3D drawings.
Key data: 600 mm, 450 mm, 400 mm
x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm Table size: 850 x 440 mm Spindle holder: SK 40 Control: HEIDENHAIN TNC 355 Spindle speeds: 20 - 4000 rpm Spindle motor: 5.9 kW Quill stroke: 80 mm Feeds - longitudinal/transverse/vertical: 1 - 2000 mm/min Feed force x/y/z: 7200 N Rapid traverse longitudinal and transverse: 10 m/min Rapid traverse vertical: 10 m/min Total power requirement: 12 kW Machine weight approx.: 2.5 t Dimensions L x W x H: 2.7 x 2.5 x 2.0 m Handwheel, coolant device
Key data: 120 mm, 1 kW
Extraction System Extraction FIELDS TYPE: AF10 Connection diameter approx. 120 mm Motor power: 1.1 KW mobile. The machine works. Prior viewing is expressly desired, simply leave phone number by mail, then I will get back to you for a viewing appointment. all information without warranty. Subject to prior sale. The machines can be picked up by yourself or shipped by freight forwarder at the expense of the buyer. Loading or packaging can be organized by us. The shipping costs are a guideline, depending on the distance and unloading option they may vary, please inquire.
Danfoss Optyma™ PLUS condensing unit Type: OP-LPHC271NTP00E 114x3480 Compressor type: NTZ271A4LR1B Cooling capacity for R404A: 14.24 kW at -10°C/40°C, 10.97 kW at -25°C/40°C, 8.24 kW at -30°C/40°C Dimensions: 1600 x 540 x 1800 mm Weight: 325 kg Number of fans: 2 x 600 mm Stock: 1 piece Stock number: AG 178 Condition: used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.
Cool condensing unit Model: M5P CSGLE ZF 40-SB-P Compressor type: ZF40K4E-TWD-551 Cooling capacity for R404A: 22.1 kW at -10°C/40°C, 11.9 kW at -25°C/40°C, 9.5 kW at -30°C/40°C External dimensions: 1460 x 850 x 1410 mm Number of fans: 2 x 500 mm Stock: 1 piece Stock number: AG 177 Condition: used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.
Key data: 100 °C
Tool temperature control unit - HB-Therm HB-100Z1 Years of manufacture: 2013 and 2014 Description: Max. heating capacity - 100°C Heat transfer medium – water Heating capacity: 8 kW Cooling capacity: 30 kW Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended Price: On request
IMA milling unit - several milling motors immediately available from stock - price on request, depending on equipment and condition
GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWTable surface850 x 650 mmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...
Exchange units for contour milling HOMAG
CharacteristicsTable surface850 x 650 mmWeight approx.5600 KgRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mGeneralVertical Machining Center; Control: Control SIEMENS 828D Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...
GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...
GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsTorque (100% DC)57 NmMax. torque83 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWTable surface850 x 650 mmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...
Chamfering unit IMA Type: 08.055 - different motor powers available Price on request (depending on version)
GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...
CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgGeneralVertical Machining Center; Control: Control SIEMENS 828D Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...
GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmRapid feed X / Y / Z24/24/24 m/minDimensions (L x W x H)3,07 x 2,67 x 2,84 mMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Air coolant external and internalAir coolant ex ...
Unit for grooving / precision cutting Make: IMA
GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsTable surface900 x 560 mmMaximum load (table centre)600 KgDrive power (100% DC)9 kWSpeed max.12000 rpmDrive power (40% DC)13 kWDimensions (L x W x H)3,03 x 3,49 x 2,94 (5,8 x 5,5 x2,94) mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z600/560/510 mmSpindle taperSK 40 DIN 69871 Max. torque82 NmTool Magazine with30 PositionsTorque (100% DC)54 NmWeight approx.5200 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the hSafety Package for Power FailureSafety Package for Power ...
Key data: 1000 mm, 450 mm, 600 mm
Universal Milling Machine DUFOUR type F250 Travel X: 1000 mm Travel Y: 450 mm Travel Z: 600 mm Spindle SA 40 Table size: Length 1400 mm x Width 400 mm Horizontally + vertically swivel head Spindle speed: from 24 to 1500 RPM Scale 3 axes MITUTOYO Horizontally + Vertically spindle Rapid X - Y - Z Lubricant pump Centralized lubrication pump Voltage: 380 V Width: 2000 mm Depth: 2400 mm Total height: 2200 mm Weight: approx 3,5 T
Adpak A700 Sleeve wrapper Adpak Easy700 shrink wrapper, sleeve wrapper machine, sealing bar 750mm width, max product 600mm x 400mm, ideal for trays, bottles, cans, food, drinks, toiletries and more, mobile, 3Ph
Unit for precision cutting Make: IMA
SNA-11 Cooling Systems / Cooling Units Location B - Room E04, Cooler and K17, Ventilation 2 units Type Carrier 09CLU04090AF, functional, Built: 1992, HD Condenser Manufacturer: Carrier Refrigeration Technology GmbH Technical Data: - Refrigerant R 422; 25 bar - Includes 2 motors 65M07/65M08; KÜHNE KPER100L, Built: 1991, - 2.2 kW; 380V; 50Hz - Compressors from COPELAND DMRH 750EWM000 Find more here - / Contact us at -
maximum number of results exceeded
please refine your search
