142,489 used machines on RESALE, but how to find them? Machine Search
HDPE Film Washer Year of construction 2016 0 operating hours (never went into operation) Manufacturer: NEUE HERBOLD, D-74889 Sinsheim composed of: Wet granulator type SM 450/600-S5-2 Friction washer / friction separator type FW 560/3000 Transport screw Separation tank (float-sink separation) type TB 500 mechanical dryer type TM 1005 Extraction system type MFT 55/500 Fine Material Separator Type HS 500 E-circuit
This new 3-axis KUNZMANN WF 610 M was manufactured in 2026. It features a longitudinal travel of 610 mm, cross travel of 400 mm, and vertical travel of 450 mm. The machine is equipped with an electronically regulated main drive for the vertical milling spindle and a rigid angle table with a clamping surface of 800 x 425 mm. If you are looking to get high-quality machining capabilities, consider the KUNZMANN WF 610 M universal machining centre. Contact us for further details.
Power supply 230 V Auction-ID: A7-51473-43
Key data: 500 mm, 400 mm, 300 mm
Year of manufacture 1985 with CNC control 432 The machine is in good condition, the second machine is available as spare part machine Two identical machines available !
Lifting height 6 meters. Auction-ID: A1-47367-2355
Voltage connection 230 V, power 1800 VA Auction-ID: A7-51473-1
Offer 24103 Specifications: - Working range of the axes - X / Y / Z 450 / 400 / 420 mm - Table size 850 x 250 mm - Max. distance from spindle to table 400 mm - Working spindle speeds horizontal 30 - 1275 rpm - Working spindle speeds vertical 66 - 2840 rpm - Feeds X – Y and Z axis - Rapid traverse - Drive 400 V / 3.2 kW - Space requirement approx. W 1400 x H 1800 x D 1400 mm - Weight approx. 1400 kg
From Herder Grenadier MBK 512/513 Auction-ID: A1-47396-1042
Winder : Bandera Model W 400/1 Contact winder / surfacewinder Roll diameter max: 1200mm Roller width: 1200mm Roll width max: 1100mm Speed: max. 55m/min Longitudinal cutting device 2 or multi-lane Side Slitting Device Automatic roll change Cross-cutting device Role magazine Calibration device Low-friction rollers motor adjustment Adjustment range: for 500-1100mm laying width takeoff unit: Type TPE-1200 Side gusset insertion device Drive: 4-pole 4kW with axial fan Electric cabinet
Voltage connection 230 V, power 1600 VA Auction-ID: A7-51473-3
Lifting height 6 meters. Auction-ID: A1-47367-2352
Stedler SAM-BA-MAT E 500 Shrink Wrapping Machine Manufacturer: Stedler Type: SAM-BA-MAT E 500 Shrink Wrapping Machine Operating voltage: 230 V Connected load: 0.75 kW Dimensions: (LxWxH) 1500 x 1170 x 1300 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!
Laser Cooling Unit Manufacturer: Riedel Type: RW 27/0SR Year of construction:2017 Refrigerant: R134a
Voltage connection 230 V, power 1600 VA Auction-ID: A7-51473-2
Offer 24303 Specifications: - Table size approx. 630 x 340 mm - Working range of the axes - X (longitudinal) approx. 400 mm - Y ( transverse ) approx. 220 mm - Z (vertical) approx. 400 mm - Max. distance between milling spindle and table surface 400 mm - Tool holder SK 40 - Working spindle speeds adjustable in 16 steps 45 - 2240 rpm - Mot table feeders X ; Y ; Z 6.3 - 1250 mm/min - Drive 400 V / 8.5 kW - Space requirement approx. W 1450 x H 1900 x D 1450 mm - Weight approx. 1600 kg - with: - 3 axis digital display HEIDENHAIN - Vertical milling head can be swivelled - Horizontal spindle counter holder - Machine vise
Model V 1000 Machine no. HO 1026 Center height over flat web 500 mm Circumferential diameter over bed 1,000 mm Bed length 6,200 mm Turning length 4,000 mm Spindle bore 104 mm Face plate diameter 900 mm Max. workpiece weight between tips 5,000 kg Max. workpiece weight with 1 setting stick 6,000 kg max. workpiece weight with 2 stacks 7,100 kg incl. documentation
Dear Ladies and Gentlemen, the machine has not run much, it has been treated with care and is fully functional.
Hello Ms. Bader, for sale is a used, fully functional milling machine of the brand - Schaublin 53 incl. accessories.
Stock # U2439-2 Used Erweka (DE) multi-task lab size set with drive AR400. Unit is driven by el motor 0.5 kW, 3000 rpm, 220 V, 50 Hz. Output rotation adjustable in range from 0-400 rpm. As a set there are included: - planetary mixer type PRS with agitators - frame, wall scrapper, hack type, whisk type. Including electrically heated mixing pan type DER. El heater power 500 W. Total volume of mixing pan about 6,5 l. - single piston homogeniser type HO with stainless steel electrically heated product hopper with volume about 2.8 l. Additional stainless steel hopper with volume about 3 l, and bypass stainless steel pipe. Output up to 30 kg/h. - Stainless steel vertical jacketed mixing tank type SG3W with belt driven 3 level paddle agitator. Bottom discharge. Total volume about 5 l. All devices last time had been working in cosmetic industry.
Stock# U2439-3 Used Erweka (DE) multi task lab size set with drive AMD/EX. Unit is driven by el motor 0.37 kW, 920 rpm, 380 V, 50 hz. Ex design and is equipped with vari speed gearbox. Output rotation adjustable in range from 46-410 rpm. As a set there are included: - stainless steel three roll mill type SMS - rolls with width 107 mm x diameter 50 mm. Output in range 2-20 kg/h. - planetary mixer type PRS with agitators - frame, wall scrapper, hack type, whisk type. Total volume of mixing pan about 6l. - single piston homogeniser type HO with stainless steel product hopper with volume about 3 l. Output up to 30 kg/h. - universal drive arm type UG with device for mounting ceramic ball mill type KM 0, mill volume 0.5 l, includes ceramic milling balls. All devices last time had been working in cosmetic industry.
Deckel Maho Universal Milling Machine DMU 125 P 1,250 x 880 x 800 mm Motor spindle 18,000 1/min. Tool holder SK 40 Automatic Swivel Milling Head Horizontal tool changer setup Double gripper 30 magazine slots Coolant tank 600 litres Internal cooling IKZ Form AD Conveyor Rotating viewing panel 3D path control TNC 430 NC rotary table diameter 1,250 x 1,000 mm Universal milling head with controlled B-axis Electronic handwheel Probe Infrared Heidenhain TS 631
Stitching and folding unit MKW SFT 350; Condition as is; suitable for connection to MKW gathering machines or as a stand-alone; 2 Hohner 52/8 stitching heads; folding device; Front cut; 2.Knife; open format 10x14cm to 50x70cm, folded format 10x7cm to 50x35cm. Stitch-fold unit MKW SFT 350; condition as is; used for MKW machines or offline; two stitching heads 52/8; folding unit; front cut; secound knife; open size 10x14cm to 50x70cm, folded size 10x7cm to 50x35cm.
x-travel: 1000 mm y-travel: 380 mm z-travel: 430 mm total power requirement: 5,5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2 x 2 x 2 m No. 4471 Universal milling machine IBERIMEX U 1000 Working area: 1000 x 540 x 430 Drive: 5.5 kW Control: Visulesta 4 digital display Table clamping surface 1500 x 360 mm documentation Spindle holder ISO 50 Speed range 40 - 1750 min-1 Space requirement approx. 2 (3) x 2 x 2 m Weight approx. 3 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 762 mm y-travel: 508 mm z-travel: 508 mm B-axis (table): +120/-35 Grad c-axis: 360 Grad control: HAAS für 5 Achsen tool piece magazine with: 40 Plätzen number of spindle speeds: 12000 U/min dimensions of the machine ca.: 4.3 x 2.35 x 2.8 m weight of the machine ca.: 8.5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 5-axis Mazak Variaxis i-500 was manufactured in 2019, featuring a spindle speed of up to 12,000 rpm and a tool magazine capacity of 30 tools. It supports workpieces up to Ø500 mm by 350 mm and has a table load capacity of 300 kg. Consider the opportunity to buy this Mazak Variaxis i-500 universal machining centre. Contact us for more information about this machine.
A universal milling machine is offered. Travels in X/Y/Z: 400mm/200mm/400mm, table X/Y: 700mm/330mm, spindle speed: 40-2000rpm, number of spindle speed steps: 18. Equipped with: Vertical milling head, overarm, machine table, manual adjustment and clamping elements and vertical machine guideway with bellows cover. Inspection possible by arrangement.
maximum number of results exceeded
please refine your search
250 € 
