126,614 used machines on RESALE, but how to find them? Machine Search
Babcock Wanson Diathermic oil heating unit Model: STPC 600B Serial Number: 12.19.N3604 Test Pressure 15bar Working Pressure 10 bar Working Temp: 350degrees Please message for more photos
In stock on pallet Auction-ID: A1-45790-567
Table rotatable, extendable and tiltable Dimensions basic dimensions: 2000 x 1750 mm Dimensions maximum extended: 4500 x 2500 mm Max. payload when tipping: 250 kg Max. payload during lift: 370 kg Equipment for transfer roller conveyors: Rear system consisting of 2 rubber roller strips in heights of 400 and 1700 mm above the installation surface on the models RU-RGAT... Ü for door lines. Roller strips mounted in front of the uprights with a distance of 120 mm. Retractable version with automatically folding system part when retracting with the table. Roller conveyor on the installation surface made of galvanized steel rollers, roller length 200 mm, divided 2 times without space at the pitch, roller diameter 50mm, distance between the rollers 200 mm. Roller conveyor open at the front for retraction with the assembly table during element transfer. Roller conveyor height adjustabl ...
Key data: 299 mm, 620 mm, 150 mm
Technical data of the machine: - Workpiece headstock: MK5 - Tailstock: MK3 - Center height: 150 mm - Center width: 680 mm - Grinding length: 620 mm - Grinding wheel left: 350 x 50 x 127 - Grinding wheel right: 250 x 25 x 127 . Geometry: The machine is completely dismantled up to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the Z and X axes are scraped by hand and restored to a like-new condition. After completion, the machine receives a measurement report according to the manufacturer's specifications Equipment of the machine (standard): • 1 workpiece headstock MK5, swivel • 1 tailstock MK3 • 2 grinding wheel holders • 1 abrasive headstock Ø 127, swivel • 1 hydraulic power unit • 1 set of operating tools and instruction manual The machine and equipment shown in this il ...
Key data: 630 mm, 560 mm, 560 mm
Year of construction 2003 Heidenhain control MC 422 18200 Spindle hours NC rotary table installed in rigid table 1000 x 600 mm Controlled B-axis 24-fold tool changer Workspace Tool holder SK40 Motor spindle 12000 rpm Incl. coolant system, chip conveyor (auger) Top condition! Machine weight 6500 kg Transport dimensions: 3.5 x 2.7 x 2.21 m
Auction-ID: A1-45793-120
Heidenhain TNC 124 Year of construction 1996 Spindle holder ISO 40 Travel 310 x 170 x 340 mm 16 spindle speeds from 40 - 2500 rpm Infinitely variable feeds Weight approx. 700 kg
impressions: 28 Mio. max. printing speed sheets: 10000 /h max. paper size: 34 x 46 cm serial no.: 956.596 total weight with 2 piles: 1030 kg paper thickness max.: 0,3 mm numbering unit: minus Version Dimensions (L/W/H): 160x110x160 mm dampening system: Direktfilmfeuchtwerk Stack height: Anleger 490 mm Stack height: Ausleger 460 mm power required: 3,0 KW frequency: 60 Hz voltage: 220-240 V 3 inking forme roller per printing unit Blanket washer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
impressions: - Mio. max. printing speed sheets: 10000 /h max. paper size: 38 x 52 cm serial no.: 8212074 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
-Toilet unit -2 sinks -Electric ventilation and lighting -Connection 220 V -Sas is missing from 1 toilet -New Auction-ID: A3-43515-30095
Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T
For more specifications, see PDF. Auction-ID: A7-45828-2
Key data: 420 mm, 250 mm, 350 mm
with Heidenhain TNC 114 digital display Tool holder ISO 40/M16 Travel X/Y/Z 420 x 250 x 350 m 12 spindle speeds from 50 - 2240 Weight approx. 900 kg Central lubrication Bellows NEW! Accuracy in: X-axis 0.005/300 mm Y-axis 0.006/250 mm Z-axis 0.01/300 mm Spindle concentricity 0.003 mm Angular accuracy 0.01/250 Spindle clearance X 0.12, Y 0.04, Spindle noise: very good Very good overall condition!
impressions: 42 Mio. max. printing speed sheets: 10000 /h max. paper size: 34 x 46 cm serial no.: 961.450 total weight with 2 piles: 1030 kg paper thickness max.: 0,3 mm numbering unit: minus Version Dimensions (L/W/H): 160x127x160 cm dampening system: Direkt Dampening System plate clamping system: Autoplate powder device: ink unit wash-up device blanket washer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
impressions: 42 Mio. max. printing speed sheets: 10000 /h max. paper size: 34 x 46 cm serial no.: 958.026 total weight with 2 piles: 1030 kg paper thickness max.: 0,3 mm numbering unit: minus Version Dimensions (L/W/H): 160x127x160 cm dampening system: Direkt Dampening System plate clamping system: Autoplate powder device: ink unit wash-up device blanket washer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Schunk Universal Gripper PGN-plus 380-1 AS Stroke per jaw [mm]: 45.0 Clamping force [N]: 12350.0 Clamping force (at finger length 0 mm) [N]: 12990.0 Min. spring force [N]: 3300.0 Net mass [kg]: 36.5 Recommended workpiece weight [kg]: 47.0 Cylinder volume per double stroke [cm³]: 2705.0 Min. operating pressure [bar]: 4.0 max. operating pressure [bar]: 6.5 Nominal operating pressure [bar]: 6.0 Min. sealing air pressure [bar]: 0.5 Max. sealing air pressure [bar]: 1.0 Closing time [s]: 0.5 Opening hours [s]: 0,8 Closing/opening time with spring [s]: 0.8 max. permissible finger length [mm]: 350.0 Max. permissible mass per finger [kg]: 17.0 Protection class IP: 40 Min. ambient temperature [°C]: 5.0 Max. ambient temperature [°C]: 90.0 Repeatability [mm]: 0.05 Length X [mm]: 410.0 Width Y [mm]: 170.0 Height Z [mm]: 226.5 Moment Mx max. [Nm]: 560.0 Moment My Max. [N ...
Schunk Universal Gripper PGF 100 AS (340381) Stroke per jaw23.5 Clamping force 1150N Clamping force (at finger length 0 mm) 1144N Min. spring force 270N Net weight: 2.85kg Recommended workpiece weight 4.4kg Cylinder volume per double stroke 154 cm³ Min. operating pressure 4 bar Max. operating pressure 6.5 bar Nominal operating pressure 6 bar Closing time: 0.16s Opening time 0.25s Closing/opening time with spring 0.7s Max. permissible finger length 100mm Max. permissible mass per finger 1.4kg Protection class IP 40 Min. ambient temperature 5°C Max. ambient temperature 90°C Repeatability: 0.03mm Length X 148.5mm Width Y 64mm Height Z 121mm Moment Mx max. 40Nm Moment My max. 100Nm Moment Mz max. 100Nm Max. force axial Fz max. 1600N
impressions: - Mio. max. printing speed sheets: 10000 /h max. paper size: 30,7 x 44,0 cm serial no.: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
impressions: 35 Mio. max. printing speed sheets: 10000 /h max. paper size: 34 x 46 cm serial no.: 957.449 total weight with 2 piles: 1030 kg paper thickness max.: 0,3 mm numbering unit: minus Version Dimensions (L/W/H): 160x110x160 mm dampening system: Direktfilmfeuchtwerk The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Schunk Universal Gripper PGNplus P 200/1-AS (318618) Size: 200, pneumatic with gripping force retention: AS • Hub per jaw: 25 mm • Clamping force: 5050 N • Max. ambient temperature: 90 °C Stroke per jaw [mm] 25.0 Clamping force [N] 5050.0 Clamping force (at finger length 0 mm) [N] 5200.0 Min. spring force [N] 1250.0 Net mass [kg] 6.8 Recommended workpiece weight [kg] 19.0 Cylinder volume per double stroke [cm³] 810.0 Min. operating pressure [bar] 4.0 max. operating pressure [bar] 6.5 Nominal operating pressure [bar] 6.0 Min. sealing air pressure [bar] 0.5 Max. sealing air pressure [bar] 1.0 Closing time [s] 0.24 Opening time [s] 0.55 Closing/opening time with spring [s] 0.4 max. permissible finger length [mm] 265.0 Max. permissible mass per finger [kg] 6.5 Protection class IP 40 Min. ambient temperature [°C] 5.0 Max. ambient temperature [°C] 90.0 ...
impressions: - Mio. max. printing speed sheets: 13000 /h max. paper size: 36 x 52 cm serial no.: 1809 dampening system: konventionell The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Schunk Universal Gripper PGNplus 200/2 AS (371455) Size: 200, pneumatic, with gripping force retention: AS • Stroke per jaw: 14 mm • Clamping force: 6250 N • Max. ambient temperature: 90 °C Stroke per jaw [mm] 14.0 Clamping force [N] 6250.0 Clamping force (at finger length 0 mm) [N] 7072.0 Min. spring force [N] 1600.0 Net mass [kg] 7.5 Recommended workpiece weight [kg] 23.5 Cylinder volume per double stroke [cm³] 495.0 Min. operating pressure [bar] 4.0 Max. Operating Pressure [bar]6.5 Nominal operating pressure [bar] 6.0 Min. sealing air pressure [bar] 0.5 Max. sealing air pressure [bar] 1.0 Closing time [s] 0.3 Opening hours [s] 0.6 Closing/opening time with spring [s] 0.5 Max. permissible finger length [mm] 200.0 Max. permissible mass per finger [kg] 6.5 Protection class IP 40 Min. ambient temperature [°C] 5.0 Max. ambient temperature ...
Schunk Universal Gripper PGNplus 300-1 AS Stroke per jaw [mm]: 35.0 Clamping force [N]: 7400.0 Clamping force (at finger length 0 mm) [N]: 7710.0 Min. spring force [N]: 1400.0 Net mass [kg]: 17.2 Recommended workpiece weight [kg]: 30.0 Cylinder volume per double stroke [cm³]: 1295.0 Min. Operating Pressure [bar]: 4.0 Max. Operating Pressure [bar]: 6.5 Nominal operating pressure [bar]: 6.0 Min. sealing air pressure [bar]: 0.5 Max. sealing air pressure [bar]: 1.0 Closing time [s]: 0.4 Opening hours [s]: 0.7 Closing/opening time with spring [s]: 0.6 Max. permissible finger length [mm]: 300.0 Max. permissible mass per finger [kg]: 11.5 Protection class IP: 40 Min. ambient temperature [°C]: 5.0 Max. Ambient Temperature [°C]: 90.0 Repeatability [mm]: 0.05 Length X [mm]: 320.0 Width Y [mm]: 140.0 Height Z [mm]: 172.0 Moment Mx max. [Nm]: 400.0 Momen ...
Linear unit with planetary gearbox, stroke 1028mm, RK Monoline Z 60, RK Rose+Krieger, used Top Used - top condition like a demonstration unit The part was removed from a pilot system that was only used for a short time and is in almost new condition. Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. The current price of a similar product is € 1980 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. Technical data: - Linear unit RK Monline Z 60, with toothed belt drive, RK Rose+Krieger, - Incl. 2 tables 187 x 140mm, table 1 is driven, table 2 is freely movable - the 2nd table can be removed - Max. stroke when using one table = 1028mm - Variable positioning of the drive - Connection linear unit - Gearbox with backlash-free Rotex ...
This 3-axis MAHO MH 1000 C/A was manufactured in 1985. It has approximately 29,192 machine hours and includes manuals and documentation. The protective doors are partially disassembled but included. If you are looking to get high-quality machining capabilities, consider the MAHO MH 1000 C/A universal machining centre we have for sale. Contact us for further details.
Code 4923 DESCRIPTION Universal milling machine Make DEBER Model FU 1 Serial No. 228 Year Table 1250 x 300 mm Longitude table 750 mm Vertical table 405 mm Cross table 240 mm Spindle taper 40 ISO Speeds 40 - 2000 rpm Feeds X-Y-Z 14 - 700 mm/min Rapides 1 and 2 m/min Spindle motor 5,5 kW - 380 Volts Weight of machine 2000 kgs Accessories universal millinghead ( 2 x turnable ) Coolant Condition Machine is in very good condition
x-travel: 900 mm y-travel: 630 mm z-travel: 500 mm table-size: 1200 x 600 mm spindle taper ISO: 40 turning speed range: 20 - 6300 U/min feeds longditudinal/cross/vertical: 2 - 4000 mm/min rapid motion -longitudinal/cross/vertical: 10/10/8 m/min numbers of positions in the tool changer: 22 quill stroke: 100 mm total power requirement: 20 kW weight of the machine ca.: 5,7 t dimensions of the machine ca.: 4 x 3 x 2,4 m electronic hand wheel: cooling equipment: Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. in condition from seller! 33.01 392 with CEE plug and cable 3-D trace control Heidenhain TNC 425 22 fold toll changer colour graphics vertical head with hydraulic tool clamping fix table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Brush unit 1300mm + 8 spare brushes Diameter 55 + 5 x brush 200mm diameter Auction-ID: A3-43520-5061
maximum number of results exceeded
please refine your search
260 € 
