uni used for sale

Central processor unit CPU, also with model number: 170174 recognizable, price ex stock

Power supply, switching power supply, CNC control, E-STOP UNIT -Manufacturer: Fanuc, E-STOP UNIT CNC control emergency stop unit -Type: A05B-2400-C451 -Dimensions: 315/100/H180 mm -Weight: 5 kg

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine, cooling unit, cooling unit -Manufacturer: Fronius, Cooling unit for Frowig 260 AC/DC TIG welding machine -Type: FK 31 -Flow rate: max. 6.5 l/min -Dimensions: 250/210/H650 mm -Weight: 19 kg

Gas and oil burners, oil burner filters, heating oil filters, filter and deaerator units, heating oil deaerators -Manufacturer: oilon, filter and vent unit unused, original packaging -Type: Oilon Plus -Technical data: see photo of the nameplate -Cardboard dimensions: 370/180/H150 mm -Weight: 1.8 kg

Central processing unit, control, switchgear, CPU, SPS, SPS control -Manufacturer: Mitsubishi, SPS control from tray sealing machine Inauen VC999/ TS 1200 N -Type: FX2n-48MR-DS -Total dimensions: 295/90/H83 mm -Weight: 1.3 kg

Prior sale reserved - errors possible Internal Reference Number: D-1143-2

CSAT printing system for blister film coloured printing. Unit is suitable for printing counterfeit-proof solutions for pharmaceutical packaging. Resolution: 1,200 dpi, output: 0.5 to 20 m/min.

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Kramp, hydraulic unit -Motor: Type EM100LB4-B14-500 3.0 kW / 1400 rpm -Individual components: see photos -Dimensions: 710/350/H340 mm -Weight: 53.1 kg

CNC control, control panel, machining center operator panel, control unit, control panel, control unit -Manufacturer: Mikron, operating unit -Type: TCD 22 - DIN 8659 -Printed circuit board: WW TCD 22 control unit 104.73.20.042 -Individual components: see photos -Dimensions: 480/130/H240 mm -Weight: 5 kg

Film wrapping machine with infeed conveyor, stacking device, outfeed conveyor with 90° curve and other outfeed conveyor 90° to the machine. PLC: SCHNEIDER. Output: 60 bundles/min.

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: HAWE, hydraulic unit with chassis -Motor: kW -Pressure: up to 300 bar -Flow rate: 20 l/min -Individual components: see photos -Dimensions: 1500/1030/H1210 mm -Weight: 555 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: HAWE, hydraulic unit with chassis -Motor: kW -Pressure: up to 200 bar -Flow rate: 48 l/min -Individual components: see photos -Dimensions: 1580/1040/H1200 mm -Weight: 632 kg

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm table surface area: 1250 x 700 mm NC-rotary table: integriert, 700 mmø spindle taper: SK 40 spindle taper: DIN 69871 spindle turning speed - stepless: 20 - 12.000 U/min control: HEIDENHAIN control: TNC 430 feeds x/y/z -stepless: 20 - 15.000 mm/min rapid traverse: 30 m/min ATC: 32 (2 x 16) Pos tool diameter: 80 / 130 mm workpiece length: 315 mm weight of tools max.: 8 kg NC-rotary table - speed -: max. 15 U/min table load: 600 / 500 kg total power requirement: 60 kW weight of the machine ca.: 9,6 t = 5-axis machining center, table clamping surface 1250 x 700 mm with integrated NC-rotary table (=4th axis), movement of milling head via control (=5th axis) Accessories: electron. handwheel, chip conveyor (snailconveyor), coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suction fan Slow runners D= 350mm Air capacity 6250m³/h

High-performance flue gas fan very good condition closed wing for high pressure 15kW V-belt transmissions

CNC control, control panel, logic unit, path control -Manufacturer: Heidenhain, logic unit path control -Type: LE 407 A 236 484 10 -Individual components: see photos -Dimensions: 480/330/H140 mm -Weight: 9.5 kg

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, gear pump, -Manufacturer: Orsta, Hydraulic unit -Motor: VEM 7.5 kW / 1430 rpm -Individual components: Hydac Hawe Hoerbiger see photos -Dimensions: 860/320/H420 mm -Weight: 97 kg

CNC control, power supply, power supply, switching power supply, power supply, servo module, control unit, Promodul -Manufacturer: Schleicher, Promodul control unit from Ilsemann KCD 1 packaging machine -Type: KEG 24-30 -Dimension: 600/145/H180 mm -Weight: 7.7 kg

3.6kW 3000m³/h 4200 PA as good as new

Motor power 18,5kW Air capacity approx. 12,500m³/h Pressing 3500PA Good condition

COLCHESTER MASTIFF V/S 1800 universal lathe was built in Great Britain in 1998. The machine allows machining a workpiece with a maximum length of 2000 mm and a diameter of 560 mm (above the bed) or 370 mm (above the support). The 11 kW spindle of the lathe with reading rotates at 1800 rpm. The lathe is equipped with a MITSUBISHI Freqrol A200 inverter and a SONY LH52 digital display. Total weight of the machine is 3250 kg. Technical data of the lathe COLCHESTER MASTIFF V/S 1800 - turning length: 2000 mm - turning diameter above the bed: 560 mm - turning diameter over support: 370 mm - inverter: MITSUBISHI Freqrol A200 - digital display: SONY LH52 - spindle speed: 1800 rpm - spindle bore diameter: 90 mm - spindle power: 11 kW - MASTIFF VS 1800 machine dimensions: (L x W x H): 3750 x 1700 x 2100 mm - total weight: 3250 kg

Tool grinding machine Jungner US-2305 Table: 1020 x 114 mm, clamping surface: 625 x 114 mm Distance between centers: 305 mm Work piece diameter: 225 mm Travels: -X: 350 mm -Y: 90 mm Spindle motor: 0,55 kW Spindle speed: 3400 / 5000 / 6700 rpm

COLOMBO lathe, H points 800x1500, hydraulic tailstock, displayed.

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 160 -Throw: 110 mm -Punching capacity: 3mm -Matrix: Ø 43 mm -Dimensions: 225/60/H150 mm -Weight: 6.6 kg

Control unit, control, for power generator, emergency power generator, generator, aggregate, power generator, emergency power generator, power generation aggregate -Manufacturer: Strüver, Control Unit Type Compact 166-S -Number: 2x controls available -Price per piece -Dimensions: 485/160/H115mm -Weight: 3 kg

Brand new machine designed for screwing reinforcements in PVC profiles. - simultaneous operation of the screwing unit - adjustable distance between screwdrivers 42-110 mm - Automatic screw connection - automatic automatic movement alignment - the ability to work as a screwdriver - screw depth sensor - powerless steering control - Specific feed account Additional equipment: - machine base - pick-up rollers - pneumatic impulse to the feeder (13mm), preventing jamming of the screws in the feeder at the entrance and exit - screw depth sensor - horizontal pressure

Operator panel, machine control, operating unit, operating panel, handheld terminal, handheld control unit -Control unit: Hand terminal for press brakes or similar use -Connection cable: see photos -Transport dimensions: Ø 400 x 200 mm -Weight: 4.8 kg

with 8,000 m³/h air volume. 11 KW fan 32 filter units Filter area 144 m2 Diameter of the filters 145 mm Deprivation via briquetting press with a nominal throughput of 100 kg/h Material-dependent

with 6,000 m³/h air volume. Standard emptying in 3 containers. Reliable, quiet and easy to use. CLEAN AIR BLOWER 7.5 KW Filter area 30 m2 Footprint 350 x 110 x h 244 cm

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Stankoimport Caenaho, hydraulic unit -Motor: 220/380 V/ 1400 rpm -Individual components: Technical data see photos type plates -Dimensions: 420/380/H310mm -Weight: 30 kg

clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, step blocks -Step block: Universal clamping pad set in wooden box -Width: 30 mm -Design/Dimensions: see photos -Dimensions box: 445/275/H75 mm -Total weight: 15 kg

with 8,000 m³/h air volume. 11 KW fan 32 filter units Filter area 144 m2 Diameter of the filters 145 mm Standard emptying in 3 containers of 200 litres each Installation dimensions 350 x 110 x h 245 cm Reliable, quiet and easy to use.

feed pressure: 250 bar liter capacity: 9 l weight of the machine ca.: 10 kg dimensions of the machine ca.: 1,15x0,4x0,4 m hydraulic gear pump - for more details see photos - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machining unit, drilling machine, drilling machine, pillar drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Manufacturer: Perske, Quill machining unit -Drive: 1.5 kW -Speed: 2800 rpm -Stroke: 55 mm -Dimensions: 720/200/H175 mm -Weight: 38 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit with hydraulic tank from vertical lathe Scherer VDZ 80 DS -Motor: ATB 0.5 kW / 2820 rpm -Individual components: see photos -Dimensions: 360/190/H540 mm -Weight: 14 kg

220627 Code Description Universal Cylindrical Grinder Make Jones - Shipman Model 1310 ( 8" x 18" ) Serial No. Year ? Grinding length, max. 450 mm Grinding diameter, max. 203 mm Center height 103 mm Weight workpiece kg Table tilting angle - 15 ° till + 15° Diam. Grinding wheel 350 mm Width Grinding wheel, max. 40 mm Motor power grindingwheel 1.5 kW Speeds Grindingwheel 1750 / 2300 rpm Speeds workpieceholder ( 6x ) 30 – 415 rpm Total power 3.5 kVA 380 Volts Machine size L x W x H 1.7 x 1.2 x 1.75 meters Weight 1800 kg Accessories internal grinding ( 10500-16500-24500 rpm ) coolant some tooling Condition Machine is in good condition

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±8 ° longitudinal feed of the table: 1100 mm table speeds: 0,02-6 m/min : 130 kg cross travel: max. 270 mm : 130 inkl. Spannung kg : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,05 t dimensions of the machine ca.: 4 x 2 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service  ...

Hydraulic pump unit Part Number : Moog - D954Z8001 Arburg - A10VDC 18 DFR1/31R The spare part is in good condition nevertheless, this is a used items, which has slight signs of wear, or may have.

Control cabinet - cooling unit, control cabinet air conditioning unit, distribution cabinet, heat exchanger, control cabinet cooler -Switch cabinet cooling unit: from vertical lathe Scherer VDZ 80 DS -Type: K0154009 SK23 259603 -Dimensions: 950/215/H400 mm -Weight: 40 kg

sheet width: - plate thickness: - plate length: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

small handy machine from Swabia

hydraulic unit, hydraulic pump, hydraulic pump, universal unit -Manufacturer: Orsta, universal unit -Engine: 2.2 kW/1410 rpm -Nominal pressure max.: 160 bar -Liter output: 2.5 l/min -Hydraulic tank/filter/valves: see pictures -Dimensions: 750/380/H620 mm -Weight: 110 kg

Punching units, punching unit, punching bracket, punching tool, non-driven notching and shearing units, forming bracket -Handover: in the current condition as viewed -Punch bracket: as shown in the pictures -Manufacturer: CEWE -Type: PA50-150 -Projection: 150 mm -Dimensions: 275/80/H140 mm -Weight: 10.3 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit -Hydraulic pump: Type 0510 525 311 -Motor: emod 5.5 kW 2870 rpm -Dimensions: 630/320/H280 mm -Weight: 49.1 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit -Engine: 11.1 kW 2760 rpm -Individual components: see photos -Dimensions: 1010/480/H1050 mm -Weight: 263 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit type CB140 H 116 -Pressure: up to 150 bar -Flow rate: 6 l/min -Hydraulic tank: with level indicator -Individual components: see photos -Dimensions: 700/400/H710 mm -Weight: 125 kg

Consisting of : - 3 tanks of 18000 litres - 3 tanks of 15300 litres - With walkways - Material: AISI 316 - Square discharge door (bottom) - Motorised mash discharge - Round manhole DN 400 (cylindrical part) - Total emptying: ball valve Ø 40 Friedrich no 2 - Partial drain: ball valve Ø 40 Friedrich no 2 - Taster - Recirculation with ball valve Ø 40 Friedrich no 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, with a cylinder-grid fixed inside (to keep the mash cake wet) Dimensions : - 3 tanks 18000 litres: Ø 2000 mm, height 5600 mm - 3 tanks 15300 litres: Ø 2000 mm, height 4800 mm - Ground clearance: approx. 550 mm

bore capacity in steel (diameter): 32 mm x-travel: 510 mm y-travel: 240 mm table surface area: 750 x 200 mm cutter diameter max.: 30 mm inserted tooth milling cutter dia.: 100 mm spindle taper: MK 3 quill stroke: 130 mm spindle turning speed range: 75 - 3200 U/min no. of turning speeds: 12 x links, 12 x rechts throat: 278 mm max. distance between table and spindle-nose: 600 mm voltage: 400 V / 50 Hz total power requirement: 1,1 kW weight of the machine ca.: 360 Kg dimensions of the machine ca.: 0,9 x 0,75 x 2,0 m • unused machine for demonstration purposes, • Machine is equipped with an adjustable depth stop, • Vertical adjustment of the milling head via dovetail guide, • Boring head adjustable to left and right til 360°, • with sturdy bottom-table. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 12000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: operating key and instruction: 2016 S25 003004 400 V, 50/60 Hz, with CEE plug and cable Color: light gray motorized height adjustment, axial grinding spindle adjustment Equipment: Opto-electronic measuring device with measuring electronics Image processing, PC (Original ISOG) CCD camera and monitor Dividing head Sk 40 with dividing disk 24 R 1 dividing disk each 14, 16, 18 Tightening screw M 16 Counter bearing complete with 4 center punch points Center point Sk 40 with driver Twist-u. Relief grinding device with rac ...

Plasma cutting machine, remote current control unit, current selector switch -Manufacturer: Hypertherm, Remote Current Control Unit current selector switch -Type: 073045 from plasma cutting machine HT2000LHF -Dimensions: 230/165/H70 mm -Weight: 1.1 kg