uni used for sale

Adaptation unit with drill chuck for verticale drillings with 1 spindle Price per unit 2 Units available suitable for IMA - incompatible with a Weeke plug

GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mRapid feed X / Y / Z36/36/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...

Angular milling unit suitable for IMA - incompatible with a Weeke plug

Verticale drilling unit, 3 spindles suitable for IMA - incompatible with a Weeke plug

ID-Nr. 1-056-11-0400

Filter bowl, pneumatic filter, filter regulator -Manufacturer: Festo, pneumatic filter type MS6-LF-1/2-CRV -Connection: G1/2 -Pressure: max. 12 bar -Price: per piece -Number: 3 Stück -Dimension box: 280/120/H150 mm -Weight: 0.7 kg/Stück

spindle diameter: 90 mm x-travel: 900 mm y-travel: 900 mm z-axis: 1200 mm w-axis: 800 mm table surface area: 900 x 1200 mm rotation movement: 360 Grad table load: 6,0 t turning speeds: 25 - 1400 U/min spindle taper ISO: 40 voltage: 380 V / 50 Hz drive milling spindle: 9,2 kW total power requirement: 35 KVA weight of the machine ca.: 10 t dimensions of the machine ca.: 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360, • radial face slide Ø 600 mm. traverse distance: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 125 mm x-travel: 3000 mm y-travel: 1500 mm control: Heidenhain TNC 355 taper ISO: 50 w-axis: 600 mm Table dimensions: 1200 x 1500 mm table load: 5 t spindle turning speed range: 12 - 2300 U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Manufacturer: Orsta, universal unit -Motor: 1.1 kW/1410 rpm -Nominal pressure: 63 bar -Liter output: 6.3 l/min -Hydraulic tank/filter/valves: see pictures -Dimensions: 380/750/H640 mm -Weight: 72 kg

High-frequency ignition device, heating, gas and oil burners, automatic burner control, gas relay, control box -Manufacturer: Satronic, gas burner control unused OVP -Type: DMG 973 Mod.01 -Number: 2x control units available -Price: per piece -Dimension box: 100/80/H65 mm -Weight: 0.2 kg/piece

x-travel: 1800 mm y-travel: 1000 mm z-travel: 1000 mm table surface area: 1000x1000 mm turning speeds: 4000 U/min head swivability: 90 ° Tool changer: 45 chip conveyor: control: Heidenhain type: total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, travel motor, drive motor, control block, hydraulic control block, control unit, control valve -Manufacturer: Casappa, hydraulic control unit for forklifts -Dimensions: 125/115/H300 mm -Weight: 6.3 kg

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Handover: in the current condition as seen -Die cuts: as shown in the pictures -Manufacturer: SUPRA, type PA8150 with base plate -Punching tool: Ø 4 mm -Dimensions: 275/200/H180 mm -Weight: 21.4 kg

x-travel: 800 mm y-travel: 450 mm z-travel: 400 mm table surface area: 1385 x 305 mm spindle taper: SK 40 quill stroke: 200 mm spindle turning speed range: 50 - 3500 U/min control: HEIDENHAIN control: TNC 155 total power requirement: 5,8 kW weight of the machine ca.: 2,5 t dimensions: 2,25 x 2,0 x 2,4 m Accessories: electron. handwheeel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Handover: in the current condition as seen -Punching frame: as shown in the pictures -Manufacturer: CEWE -Type: PW8-150 -Projection: 150 mm -Dimensions: 310/100/H215 mm -Weight: 9.1 kg

Hydraulic filter, filter element, high pressure filter -Manufacturer: Parker, high pressure filter with contamination indicator -Type: 0-24P-1-40W-M-1-2 filter unit with 2 filters -Price/sale: only complete -Dimension: 500/250/H160 mm -Weight: 20.8 kg

spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1700 mm Control: Fanuc spindle taper ISO: 50 z-travel: 1400 mm Table area: 1250x1500 mm Table load: 5000 kg spindle turning speed range: 35-3000 U/min Tool changer: 60 chip conveyor: covers for slideway: total power requirement: 18,5 / 22 kW weight of the machine ca.: . t dimensions of the machine ca.: 1250 x 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine -Manufacturer: Brandt, aggregate from edge banding machine BRANDT KS 25 -Engine. Groschopp 0.25 kW / 2800 rpm -Gearbox: i 12/233 rpm -Dimension total. 560/340/265 mm -Weight: 28 kg

Gluing unit, gluing section, gluing head, heating basin for edgebanders, edgebanding machine -Manufacturer: Brandt, components from the BRANDT KM 36 edgebanding machine -Individual components: see photos -Price/Sale: complete -Overall dimensions: 1200/800/H530 mm -Total weight: 122 kg

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm spindle taper ISO: 40 spindle turning speed range: 80 - 4000 U/min transmission ratio: 18 feed range: 0,1 - 2000 mm/min rapid traverse: x = 4 / y = 3 / z = 5 m/min table load capacity: 250 kp voltage: 380 V / 50 Hz spindle drive: 5,5 kW total power requirement: 16 kVA weight of the machine ca.: 2,6 t dimensions of the machine ca.: 3,8 x 4,3 x 2,0 m • CNC-control system 432 E • Operating hours: 37719 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Central unit, control system, switchgear, CPU, PLC -Manufacturer: B&R Bernecker & Rainer, Minicontrol with Control Panel -Product number: MCGE33-0 -Individual components: see photos -Overall dimensions: 255/130/H220 mm -Weight: 2.3 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control -Manufacturer: Beckhoff, position control type E300 -Connection sockets: only with plug, cable separated -Dimensions: 600/400 / H200 mm -Weight: 18.1 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control, handheld terminal -Manufacturer: Battenfeld, control unit from injection molding machine BA-T2400 -Dimensions: 380/120 / H85 mm -Weight: 1.7 kg

High-frequency ignition device, heating, gas and oil burners, automatic burner control, gas relay, control box -Manufacturer: Satronic, gas burner control unused OVP -Type: DMG 972 Mod.01 -Number: 2x control units available -Price: per piece -Dimension box: 100/80/H65 mm -Weight: 0.2 kg/piece

spindle diameter: 80 mm x-travel: 1100 mm y-travel: 750 mm z-travel: 1350 mm surface area: 1000 x 1000 mm total power requirement: 6 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 5x3x3 m • 3-axis-D.R.O. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

?dapter unit flat scraper

Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Hydraulic unit: from Heycop 3UN/2000 automatic lathe -Motor: Siemens 1.5 kW/2855 rpm -Hydraulic tank: with level indicator -Pressure display: up to 60 bar -Dimensions: 300/500/H650 mm -Weight: 130 kg

x-travel: 1000 mm y-travel: 300 mm z-travel: 400 mm table-size: 1320 x 360 mm spindle taper ISO: 40 spindle turning speed range: 58 - 1800 U/min total power requirement: 4 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,1 x 2,1 x 1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4700 mm y-travel: 1000 mm z-travel: 1000 mm control: HEIDENHAIN TNC355 table-size: 5000x1000 mm T-slots: 7x mm turning speed range: 2800 U/min feed: 6-5000 mm/min rapid traverse: 15000 mm/min spindle motor: 30,00 kW spindle taper: SK 50 Table load: 10.000 kg Main drive: 40 PS weight of the machine ca.: 27,00 t dimensions of the machine ca.: m With HEIDENHAIN TNC 355 control. Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm z-travel: 2000 mm w-axis: 700 mm table load: 10.000 kg Table dimensions: 1600x1800 mm Control: Fanuc 31iMB voltage: 400 V number of spindle speeds: 35-3000 U/min taper ISO: 50 Tool changer: 60 total power requirement: 20/30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1700 mm Control: Fanuc 32iMB spindle taper ISO: 50 z-travel: 1400 mm Table area: 1250x1500 mm Table load: 5000 kg spindle turning speed range: 35-3000 U/min Tool changer: 60 chip conveyor: covers for slideway: total power requirement: 18,5 / 22 kW weight of the machine ca.: . t dimensions of the machine ca.: 1250 x 1500 mm Manual Guide i The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic cylinder, air cylinder, standard cylinder, guide unit -Manufacturer: Festo, guide unit -Type: FEN-50-0250-KF -Stroke: 250 mm -Bore: for piston Ø 40 mm -Price: per piece -Number: 1 piece -Dimensions: 437/135/H70 mm -Weight: 4.7 kg/piece

spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1500 mm z-travel: 1450 mm table surface area: 1400 x 1600 mm taper ISO: 50 spindle speed:: 2 - 2500 Control: TOSNUC 7-3 total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 10000 mm y-travel: 3500 mm z-travel: 1000 mm Control: Heidenhain type: TNC 155 workpiece weight: 300 t turning speeds: 1620 U/min spindle taper ISO: 50 One direction thrust bearing: 2 Angle head: 2 power capacity: 76 kW Plate area: 12000x9000 mm rotary table:: Colgar type: TRT1500 mm table surface area: 2000x2500 mm Table load: 20000 kg Travel: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Plate area: 109 m² Panel is optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Guide unit for pneumatic cylinders, air cylinders, standard cylinders -Manufacturer: Festo, FEN control unit... -Type: FEN -X-S1-SA see image of type plate -Stroke: approx. 200 mm -Bore: for piston Ø 48 mm -Dimensions: 465/190/H105 mm -Weight: 14.2 kg

Hydraulic power unit, hydraulic pump, hydraulic test pump -Hydraulic unit for: Power chuck -with: transport trolley -Drive: Siemens 220/380 V 1.5 kW 1405 rpm -Hydraulic filter -Hydraulic tank -Dimensions: 1330/510/H1200 mm -Weight: 170 kg

High-frequency ignition device, heating, gas and oil burners, automatic burner control, gas relay, Control box, burner control -Manufacturer: Landis & Staefa, automatic burner control unit -Type: LMG22.130A27 -Dimensions: 90/60/H60 mm -Weight: 0.2 kg

spindle diameter: 160 mm x-travel: 6400 mm y-travel: 3900 mm z-travel: 1450 mm turning speeds: 500 U/min power capacity: 52 kW chip conveyor: digital readout: Plate area: 12500x5500 mm Plate area: 7000x3500 mm Plate area: 93 m² total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m florplates are optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit for: power chucks -Drive motor: Ziehl-Abegg type HYDT.132,28-4 -Motor: 11 kW 1420 rpm -Dimensions: 1300/400/H820 mm -Weight: 270 kg

Pneumatic rotary cylinder, swivel drive, pneumatic cylinder, air cylinder, swivel linear unit -Festo type: DSL-32-50-270-P-S2-CC-KF -Piston: Ø 32 mm -Stroke: 50 mm -Swivel angle: 0 to 272° -Max. Pressure: 8 bar -Dimensions: 335/105/H105 mm -Weight: 3.7 kg

liter capacity: unbkt l coolant: unbkt pressure: unbkt t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic cylinder, air cylinder, standard cylinder -Guide unit with: pneumatic cylinder -Pneumatic cylinder stroke: 200 mm -Guide unit type: FEN-40-0320 -Dimensions: 495/115/H58 mm -Weight: 5 kg

- 3-cheek lining - 4-cheek lining - fixed bezel - running bezel - 3-axis position display Sino SDS6-3V - Multifix Type E incl. 4 holders - Splash guard - Oil pan - Lighting system - Foot spindle brake - Coolant sealing - Steel stand with 3 drawers and cabinet door - Reduction sleeve - Spare gears Technical data: - Circulating Ø over bed: 360 mm - Circulation Ø over slide: 212 mm Ø without bridge: 490 mm - Center width: 1000 mm - Bed width: 187 mm - Spindle bore: 51 mm - Metric threads: 0.2 - 5 mm (28 steps) - Inch thread: 8 - 112 tpi (36 steps) - Module thread: 0.2 - 3 mm (22 steps) - Thread with diametrical slope: 8 - 112 dp (36 steps) - Longitudinal feed: 0.050 - 0.696 MM (36 steps) - Transverse feed: 0.013 - 0.188 mm (36 steps) - Tailstock Pinoleenaufnahme: MK3 - Tailstock Pinoleenhub: 100 mm - Motor power: 1.5 kW - Dimensions WxHxD: 1925 x 1510 x 75 ...

Lacfer CR2-E250 rebuilt lathe. Distance between centers: 1.500mm. Swing: 530mm. Swing over carriage: 320mm. Swing in gap: 740mm. 16 speeds. (18-1.600rpm). Main motor power: 10hp. Spindle bore: 60mm. Equipped with universal chuck. Equipped with steady rest. CE certificate for european used machines.

- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Flat disc ø 430 mm - Lighting system - Coolant sealing Specification - Tip width: 2000 mm - Circulating Ø over bed: 600 mm - Circulation Ø over slide: 360 mm - Circulating Ø in eruption: 730 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/U (66 steps) - Transverse feed: 0.036 - 2.019 mm/U (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock ...

Pressure measuring device, flow measuring device, measuring and control technology, measuring device -imc: universal measuring device µ-MUSYCS -Voltage: 110 - 230 V AC/DC -Dimensions: 330/345/H145 mm -Weight: 6.4 kg

PROFROID QC MT 100 PK Brand:PROFROID Type:QC MT 100 PK Stock number:M21-1293 Cooling capacity:6.82 kW Application:Cooling Number of fans:2 Refrigerant:R744 (CO2) Voltage:400 Volts Motor power:2x 0,25 kW Dimensions:1200 x 390 x 1430 mm Weight:185 kg Year:2018 New/unused Number in stock:1 piece(s) Price: Quotation request Description: New unused Profroid condensing unit with 1 scroll compressor. Mentioned capacity at an evaporating temperature of -8°C and an ambient temperature of +32°C. Please visit also our website: used-refrigeration

Control unit, control panel, control panel, control unit, keyboard, screen, control, air humidification, dehumidification and evaporative cooling -Module: M4 (large display) -for: Condair CP2 -Type: M4 -Weight: 0.3 kg

PROFROID QC MT 30 PK Brand:PROFROID Type:QC MT 30 PK Stock number:M21-1292 Cooling capacity:2.25 kW Application:Cooling Number of fans:1 Refrigerant:R744 (CO2) Voltage:230 Volts Motor power:0,25 kW Dimensions:1200 x 360 x 1028 mm Weight:125 kg Year:2019 New/unused Number in stock:1 piece(s) Price:Quotation request Description: New unused Profroid condensing unit with 1 scroll compressor. Mentioned capacity at an evaporating temperature of -8°C and an ambient temperature of +32°C. Please also visit our website: used-refrigeration

Control unit, heating controller, osmosis control control box, heating controller, heating control device -Eurotherm: nanodac 4-channel curve recorder -Heating control system for: 2 heating fields -Table control unit with: 380 V connector -Number: 3x available -Price: per piece -Dimensions: 560/540/H300 mm -Weight: 26 kg/piece