uni used for sale

Displacement unit

Tools of a groove drawing machine Stuhlmann With partial apparatus - residual stock tool Part apparatus of a groove drawing machine Stuhlmann, without tool cabinet! With residual stock of tools according to photos.

Power: 6KW , Ratio: 320:1 , Speed in/out: 1.450 / 4,53 , Shaft ø in: 70mm. , Shaft ø out: 125mm. (hollow)

Programming Trolley KP-Qume QVT52 III composed of: Mobile PC Type: KP-Qume QVT52 III Screen diagonal 14" (35.5 cm) Picture tube flat, white phosphorus Screen display 24 lines / 80 or 132 characters / 1 status line / 1 user line Character representation - 80 characters: 14 x 15 matrix in a 16 x 16 cell or 14 x 12 matrix in a 16 x 13 cell - 132 characters: 7 x 15 matrix in a 10 x 16 cell or 7 x 12 matrix in a 10 x 13 cell Refresh rate depending on character display: 78, 70 or 65 Hz Character sets 96 ASCII characters, 7Bit ISO. In QVT119+ emulation: IBM Codepage 437/850 Screensaver yes, adjustable times Memory 4 or 7 screen pages depending on emulation Keyboard New ASCII (N.A.), various languages, 20 + 1 function keys programmable Emulations Qume QVT 101+/119+, Wyse WY30//50, TeleVideo TVI 910+/925/905, ADDS A2, ADM 5, ADD ENH, HZ 1500 Interfaces 2 Serial up to 38.4kB / ...

Dampening engine for SHIVA 572

Grease separator sether boiler, Type: Easy Clean Standard NS 4B completely cleaned and rinsed, grease-free and odourless. leakage test. A spout pump is included in the scope of delivery. New price was 8000,00â?¬ net. Deutschaland-wide shipping in German-speaking countries possible at an additional cost. Delivery: - Boiler grease separator Easy Clean Standard NS 4B - Sampling device DN100/150 horizontal - Spühl pump for grease separators

Rotary union, 2x 1/2", 991769, Haag & Zeissler, used Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - Comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional,- It may be that these are only minor storage marks and that the part is still as good as new and has never been used, but we cannot say for certain. Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updat ...

Item nr.: 907572-0000 Counter Omron for Tetra Pak machines Omron high speed counter unit, C200H-CT001-V!

central lubrication unit, MFE5-KW3-S22+299, Vogel, used Top Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, Technical data: - Central lubrication unit, MFE5-KW3-S22+299, Vogel, used-Top - Gear pump MFE5-2000+299, - incl. switch box with motor protection and contactor, - incl. oil pressure hose - incl. 400V connection cable with CE plug - Test: Smooth pump operation and immediate delivery - Can be plugged in and used immediately Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is n ...

central lubrication unit, MFE5-KW3-S22+299, Vogel, used Top Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, Technical data: - Central lubrication unit, MFE5-KW3-S22+299, Vogel, used-Top - Gear pump MFE5-2000+299, - Including conversion for connection of an oil supply line, - Test: Smooth pump operation and immediate delivery Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the pr ...

Universal milling machine vertically / horizontally from a training workshop Manufacturer Hermle Type FW801 Tool holder SK40 automatic feed in three axes Digital display in three axes Machine technically in very good condition under electricity ready for demonstration Technical data: Travel: x=350mm y=150mm z=220mm Spindle speeds from 50 to 3,150 rpm can be infinitely variable Feed speed infinitely adjustable via rotary pot from 10 to 5,000 mm/min, aisle Special price Used milling machine Hermle FW 801

Maximum removal of impurities. Increased quality of the final product. Extended service life of the operating process. High reliability. Low pressure loss. Service-friendly. Tested according to applicable ISO standards. Filter package Replace filter G85 1/2" residual oil 0.3 mg/m³ after 2000 hours Replace filter C85 1/2" residual oil 0.01 mg/m³ after 2000 hours Replace filter V85 1/2" residual oil 0.003 mg/m³ after 1000 hours Residual oil after filter package 0.003 mg/m³ = technically oil-free + Wall bracket + Connection kit Filter G Equipment in detail Drain: Automatic float drain valve Performance data Nominal capacity 1.42 m³/min Application: Oil Aerosol Oil aerosol concentration in the outlet 0.3 mg/m³ Total mass efficiency >99.25 % Quality class of air at the outlet (oil) 3 according to ISO 8573-1:2010 Pressure loss dry 55 mbar Pressure loss wet 125 m ...

Table clamping area: 190 x 710 mm Table movement x: 390/360 mm Table movement y: 150 mm Table movement z: 280 mm Spindle holder: SK 40 Spindle speeds: 100 - 3100 rpm Feeds longitudinal 0 - 600 mm/min electr. Connection: 380 V, approx. 1.5 kW Space requirement: 1400 x 1200 x 1500 mm Weight: approx. 680 kg

Attention: Before purchasing a used universal tester / tractor, consider the old, used machine (all?) need new electronics for WIN 10. No manufacturer / Microsoft provides support for WIN XP / 7 – an expensive impasse! Purchase, pickup, software update (if possible?), commissioning, modernization are more expensive than a new galDABINI machine Quasar 600 kN incl. load cell 600 kN, Latest technology (BECKHOFF Elektronik) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable, using finite elements FEM, 2-line universal test era Optional load cells N: 10 | 20 | 50 | 100 | 250 | 500 or kN 1 | 2.5 | 5 | 10 | 25 | 50 | 100 | 200 | 250 for tests on steel, reinforced steel, plastic, rubber, foils, textiles, wire, sheet metal, components, assemblies and many more. Very well Made in Italy | Europe, German + European Q ...

Thank you for your interest in our used machines, which we can offer you as follows: Manufacturer: SME Group Model: FM 5540 shrink wrapping machine Built: 2010, hardly used Max Package Dimensions: 450x330x150mm Machinery Dimensions: 1685x828x1480mm Max welding dimensions 550x450x120mm Weight: 125kg Electrics: 1pH 110V/220V 50/60Hz, 2.5kw Foil: PVC, PP and POF We offer this machine " in existing condition " for sale, excluding any warranty/defect claims or assurances. from the hess. Lichtenau; Unpacked

Mechatronics RPU-2100R Reagent Production Unit The Mechatronics RPU-2100R is a reagent production unit used in the field of hematology to optimize reagent logistics in laboratories. The instrument is manufactured by RR Mechatronics and is often used in combination with Sysmex hematology analyzers. Purpose and function The RPU-2100R (Reagent Production Unit) is designed to automatically dilute concentrated reagents (such as Cellpack S Conc.) and produce large quantities of ready-to-use reagent on-site in the laboratory. The RPU-2100R is a stand-alone device whose components are all housed in a closed housing. The housing features removable, epoxy-coated sheet metal covers. All external connections as well as the ON/OFF switch are located on the back of the device. All components that can be serviced and replaced by the user are accessible through the front door. The  ...

RMH G 60 New Manufacturer: RMH Roller cutting width: 2000mm Roller cutting height: 1200mm Dimensions ( L x W x H ): 3100 x 1300 x 2500 mm Drive: 11 KW Manual and automatic working procedure Two-handed operating system Cutting force: 2 x 30 cylinders (60 tons cutting force) Total weight: 4200kg

MAHO MH-700 with numeric control X, Y Table size: 800x300 Working area: X-450,Y-250,Z-300 Spindle taper: MK3 Feed range: 7-250mm/min Vertical head swiveling 90 degreess Power: 3KW Dimensions: 1300x1200x1700

Waste separation plant - unpacking plant Food Waste Disposal plant / separation and separation plant for food & industrial waste. The innovative wet-separation plant for the treatment and separation of mixed, packaged and unpackaged waste. This plant is a solution for the settlement of the TA municipal waste of the Waste Disposal Ordinance, which prohibits the disposal/landfilling of untreated, organic, biodegradable municipal waste since 1 June 2005. By processing and separating organic and/or municipal waste, we reduce the pollution and provide a larger volume of high-quality biomass for recycling. If waste has previously been landed untreated, such waste is processed and recycled. The organic components are returned as compost or biomass for the production of renewable energies, which leads to a significant reduction in landfilling and thus the associated methane emission.  ...

Machine is equipped wit h HEIDENHEIN DIGITALS 2 TURNING HEADS TURNING LENGHT 1800mm HOLE TROUGH SPINDLE 76mm WITH LINETS AND ACCESORRIESS, READY TO WORK. BEFORE LOADING MACHINE WILL BE CLEANED FOR THE CUSTOMER.

Year of manufacture: 2013 CNC Controller: FAGOR 8055TCO Capacity Distance between centers (mm): 3000 Height between centers (mm): 300 Height between centers from the ground (mm): 1200 Grinding diameter (mm): ø 595 Max. workpiece weight between centers (kg): 2000 Max. Workpiece weight with tool (kg): 200 Table (Z-axis) Maximum travel (mm): 3350 Rotating table plate ±5° Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Grinding carriage (X-axis) Maximum travel (mm): 500 Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Resolution (mm): 0.0005° Grinding head Left grinding wheel diameter (mm): 600 Peripheral speed (m/s): 45 Workpiece head Spindle speed (rpm): 9 ÷ 250 CM taper: 5 Spindle type: 8" Tailstock Type: Manual handwheel Spindle taper (cm): 6 Maximum spindle travel (mm): 60 Quill diameter (mm):  ...

Filter bowl, pneumatic filter, filter regulator -Manufacturer: Festo, pneumatic filter type MS6-LF-1/2-CRV -Connection: G1/2 -Pressure: max. 12 bar -Price: per piece -Number: 3 Stück -Dimension box: 280/120/H150 mm -Weight: 0.7 kg/Stück

High-performance milling spindle, unused                high speed milling spindle, unused   Machine model: MFWS 1709/24/72 VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                                         FS 40-10-30-4- AOW                                                                                B 812LD 9913 - 319416 spindle speed/ infinitely variable: 150... 5300 rpm taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

High-performance milling spindle, unused                high speed milling spindle, unused  high speed milling spindle, unused/new   Machine model: MFWS 1709/24/47/VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                            FS 40-10-30-4- AOW                                                                  B 812LD 1551 - 230 30 84 Speeds/ spindle speed/ infinitely variable: 150... 5300 rpm Wz recording /taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

Evaporator for freezer, shock freezer, evaporator, make: Güntner with two pieces fan (650mm diameter), quick fan, blowing, Lamb spacing is 12 mm 55 litres capacity

Wiedenmann foliage loading blower KLB 645, Honda 4-stroke gasoline engine GX 240, 6.0 kw/8 hp, turbine approx. 380 mm, with suspension for side wall. Incl. telescopic gallows and approx. 3 m suction hose with suction nozzle and handle as well as settling frame with lift. Ready-to-use good condition.

Tempering device Hahn Automation Built: 09/2010, occasionally worked Weight: 600 kg Heating: 2x 24kW , 80 A Pumps: 2x 3.0 kW , 20 A

Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Manufacturer: Orsta, universal unit -Motor: 1.1 kW/1410 rpm -Nominal pressure: 63 bar -Liter output: 6.3 l/min -Hydraulic tank/filter/valves: see pictures -Dimensions: 380/750/H640 mm -Weight: 72 kg

PROFROID GC3/CB2SHS50ZC/C5AH4MD4 12P Brand:PROFROID Type:GC3/CB2SHS50ZC/C5AH4MD4 12P Stock number:M20-1261 Cooling capacity:46 kW Application:Freezing Number of fans:4 Refrigerant:HFC, R404A Voltage:400 Volts Weight:1,750 kg Year:2004 Number in stock:2 piece(s) Price:Quotation request Description: Nice Profroid condensing unit built inside an enclosure, consisting of 2 Copeland piston compressors, condenser, switch box and liquid tank. Mentioned capacity at an evaporating temperature of -30°C and a condensing temperature of +40°C. Visit also our website: used-refrigeration

High-frequency ignition device, heating, gas and oil burners, automatic burner control, gas relay, control box -Manufacturer: Satronic, gas burner control unused OVP -Type: DMG 973 Mod.01 -Number: 2x control units available -Price: per piece -Dimension box: 100/80/H65 mm -Weight: 0.2 kg/piece

For the production of snap folds and Pittsburgh folds, we supply folding forming machines, which produce a folded workpiece from a wide variety of sheet metal materials using a rollforming process from a flat sheet metal strip. Frm Rolling machine for the production of snaplock folds (snap folds) and S- or L-shaped folds up to 32 mm output length – as well as Pittsburgh folds with 13 mm folding height, Material thicknesses that can be rolled-reshaped - steel + aluminium 0.6 mm to 1 mm - stainless steel 0.6 to 0.7 mm, forming stations 9 pieces - throughflow speed 15 m/min, e-instances per meter 20 pieces - punch ingesrant distance 50 mm, dimensions approx. 2.3 x 0.7 m x H 1.1 m, drive power 3 kW, weight 450 kg

TO WHOM IT MAY CONCERN ; WE VE NEW - UNUSED ABB SYNPOL D CMA 130 3DDE 300 410 AT OUR STOCK PART NO 7049 IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

New drive shafts for Vertical and Universal Fraeshead FU 400 - FW 400 HECKERT Germany Price 900,-- Euro per square plus VAT

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, travel motor, drive motor, control block, hydraulic control block, control unit, control valve -Manufacturer: Casappa, hydraulic control unit for forklifts -Dimensions: 125/115/H300 mm -Weight: 6.3 kg

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Handover: in the current condition as seen -Die cuts: as shown in the pictures -Manufacturer: SUPRA, type PA8150 with base plate -Punching tool: Ø 4 mm -Dimensions: 275/200/H180 mm -Weight: 21.4 kg

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Handover: in the current condition as seen -Punching frame: as shown in the pictures -Manufacturer: CEWE -Type: PW8-150 -Projection: 150 mm -Dimensions: 310/100/H215 mm -Weight: 9.1 kg

Technical data: Turning diameter over bed: 520 mm Turning diameter via support: 310 mm Turning length: 1000 mm Circulation diameter in recess: 580 mm Peak height: 250 mm Bed width: 410 mm Spindle bore: 62 mm Spindle flange: Camlock Gr. 8 Spindle speeds: 24: 9 - 1800 rpm Machine weight approx.: 2.75 t Space requirements approx.: 2.8 x 1.3 x 1.3 m Electrics 380 Volt: 32A Three-jaw lining: 315 mm Forkart Coolant device Measuring system: Glasstab 0.005mm resolution on all 3 axes Quick-release steel holder " Multifix ": C

Perfect, used short time. Lead Screw and Feed Shaft Lathe 3-axis position indicator Workpiece length (max.) 1.928 mm Turning diameter over bed 560 mm Turning-Ø over support 355 mm Turning diameter over gap bridge 785 mm Gap bridge length 170 mm Bed width 350 mm Travel X-axis 316 mm Travel Z1-axis 130 mm Swing range of top slide ± 52° Spindle speeds L 25-200 / H 200-1600 1/min Spindle bore 80 mm Spindle mount Camlock D1-8 Spindle taper MT 7 Feed X-axis 0,02 - 0,573 mm/R Feed Z-axis 0,059 - 1,646 mm/R Tapping, metric (47) 0,2 - 14 mm Tapping, diametric (50) 4-112 DP Tapping, module (39) 0,1 - 7 mm Tapping, whithworth (60) 2-112 TPI Tailstock quill diameter 75 mm Tailstock taper MT 5 Tailstock quill stroke 180 mm Tailstock traverse adjustment ± 12 mm Motor rating main drive 7,5 kW Overall dimensions 3,34x1,15x1,46 m Weight 2.720 kg 3-jaw chuck Ø 315 mm 4- ...

Mini roller cutter Our range now also includes machines for processing residual rolls, for example from paper production, the packaging industry, printing houses, textiles, aluminium rolls, film rolls, etc. These heavy rollers cannot be processed efficiently and safely with the normal cutting systems, but with these special "guillotine" roller cutters this is no longer a problem. The mini roller cutter can be seen here as a standard version. We offer the Mini roller cutter in version G20 / 25 and G30. All data can be customized according to the customer's wishes. (Sensors | Protective grille | Light barriers | colour, etc.) Roll width: max. 700 mm Roller height: max. 800 mm Drive: 5.5 Kw Cutting force: 25 T cylinders Weight: 1200 kg Working cycle: 65 seconds Including automatic return: Important roll cutting width and roll cutting height can be adjusted as desired. Dep ...

Hydraulic filter, filter element, high pressure filter -Manufacturer: Parker, high pressure filter with contamination indicator -Type: 0-24P-1-40W-M-1-2 filter unit with 2 filters -Price/sale: only complete -Dimension: 500/250/H160 mm -Weight: 20.8 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine -Manufacturer: Brandt, aggregate from edge banding machine BRANDT KS 25 -Engine. Groschopp 0.25 kW / 2800 rpm -Gearbox: i 12/233 rpm -Dimension total. 560/340/265 mm -Weight: 28 kg

Gluing unit, gluing section, gluing head, heating basin for edgebanders, edgebanding machine -Manufacturer: Brandt, components from the BRANDT KM 36 edgebanding machine -Individual components: see photos -Price/Sale: complete -Overall dimensions: 1200/800/H530 mm -Total weight: 122 kg

Stretch wrapping machine IMA model: MS300AM

Central unit, control system, switchgear, CPU, PLC -Manufacturer: B&R Bernecker & Rainer, Minicontrol with Control Panel -Product number: MCGE33-0 -Individual components: see photos -Overall dimensions: 255/130/H220 mm -Weight: 2.3 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control -Manufacturer: Beckhoff, position control type E300 -Connection sockets: only with plug, cable separated -Dimensions: 600/400 / H200 mm -Weight: 18.1 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control, handheld terminal -Manufacturer: Battenfeld, control unit from injection molding machine BA-T2400 -Dimensions: 380/120 / H85 mm -Weight: 1.7 kg

Universal punch pots usM 900; good condition; cleaned and tested; 2x punching head; Table size 900x600mm; Max. Insert height 80mm. Universal punch potions USM 900; good condition; cleaned and checked; two heads; table size 900x600mm; max.pile hight 80mm.

Storage number: 3574 miscellaneous Manufacturer: GRUNDFOS , Type: CR2-60A-A-A-AUUE specifications: Rated Flow 2.5 m3/h Volt 380 Engine Power 0.75 Max pressure 16 bar/120 C Bar Pressure height 37.7 m Weight: 15 kg