128,237 used machines on RESALE, but how to find them? Machine Search
Manufacturer: Uniglass Model: UGTPLUS 1548-1-R Year of Manufacture: 2010 Voltage: 400 V AC Frequency: 50 Hz Control Voltage: 230 V AC / 24 V DC Power Ratings: - Heating Power: 690 kW - Motor Power: 870 kW - Total Power: 1570 kW Certification: CE Marked - the max. oven capacity is 4800x1500mm - the smallest dimension must have a diagonal of 290mm - The furnace can prestress thicknesses from 2.85 – 15mm - Regarding the condition of the system, it must unfortunately be mentioned that the ceramic rollers are in a bad condition Find more here - / Contact us at -
A single-chamber glass tempering furnace (pre-stressing system) Uniglass for the toughening process of safety glass is available. Heating capacity: 690kW, motor power: 870kW, total power: 1570kW, minimum diagonal dimension: 290mm, glass thickness range: 2.85mm–15mm, max. glass dimensions X/Y: 4800mm/1500mm. The ceramic rollers are in poor condition. Documentation available. An on-site inspection is possible. Expected to be available from November 2025.
Set of blow molds for PET blowing machine Sidel SBO Universal - 10 molds HR for heat resistent bottle 1.0 litre - 10 molds for standard bottle1.0 litre Molds were used to produce PET bottles for juices Low working hours Molds are n very good condition Available immediately Can be customised
through-put width: 580 mm working heigth: 580 mm air consumption: 400 - 800 l/min working pressure: 3,4 - 8,0 bar suction capacity: 17,4 m³/h total power requirement: 1,2 kW weight of the machine ca.: 115 kg dimensions of the machine ca.: 1225 x 935 x 1640 mm - Suitable for various blasting materials, e.g. quartz, glass ball, Plastic ball, etc. - Ideal for cleaning, derusting or removing paint from all metal parts Type, e.g. engine parts, fittings, signs, housings, rims, hinges - High-quality latex work gloves are firmly attached to the housing - Optimal visibility and occupational safety when machining workpieces because of the Window with glued protective film - Dust-free work due to all-round seals on the cover and door frames - Stable storage grid enables workpieces to be placed in the cabin interior - With drain opening for changing the blasting material - Suction pipe for the b ...
UNITRONICS Display V570-57-T20B Functional, Year of build: Unknown, Construction year: unknown, Type of control: conventional, Stock location: 75242 Neuhausen DE, storage location: 75242 Neuhausen, Coutry of origin: -, Country of origin: -, Delivery time: immediately available, delivery time: immediately available, Freight base: in stock, Price: On demand
Height=1.39 m, Overall length= 2.27 m, Overall width= 0.99 m, Net weight= 1282 kg,
Height=1.6 m, Overall length= 1.5 m, Overall width= 2.6 m, Net weight= 1275 kg,
Unitech Boot wash station Stainless, two way boot wash station with fixed side brushes, turning horizonal brushes with water jets, overall length inc steps is 2400mm, overall width 850mm, 3Ph
Min. schuifraamhoogte: 200 mm Max. Schuifraamhoogte: 460 mm 230v / 50 Hz Gassenfilters: Type A (Organisch) / Type BE (zuur) , Type F (Formaldehyde) en Type K ( Amoniak en Amines)
weight max. in kg: 1000 kg table width: 800 mm stroke height: 190-1010 mm table length: 1300 mm stroke of worktool slide: 40 mm/sek. weight: 220 kg Furnishing: - For ergonomic work at the optimal working height - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Stepless lifting and lowering - Stable powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Meets the safety criteria of EN 1570 - High pressure cylinder with double safety function The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 2000 kg table length: 1300 mm stroke height: 190-1010 mm table width: 800 mm stroke of worktool slide: 22 mm/sek. weight: 280 kg Furnishing: - For ergonomic work at the optimal working height - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Stepless lifting and lowering - Stable powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Meets the safety criteria of EN 1570 - High pressure cylinder with double safety function The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
lifting force: 5,0 t height: 585 mm width: 230 mm weight of the machine ca.: 25 kg Furnishing: - high precision according to the OIML R 76 standard - calibratable - Tare over the full range - works via direct display operation as well as via the remote control - Including remote control up to 10 m range and calibration function - bright and easy to read LED display with 30 mm high digits - Value can be held and frozen - The net weight can easily be determined using the tare function - Totalizing function for series weighings0 - automatic shutdown function - Overload warning on the display - Power supply via internal battery 6V / 10Ah, included in delivery, easy to swap and charge Model with 10 to. Lifting capacity also available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions:: innen 1160 x 580 x 580 mm Air consumption: 400 - 800 l/min. air pressure: 3,4 - 8,0 bar workpiece weight: max. 120 kg total power requirement: 1,2 kW weight: 115 kg range L-W-H: 1225 x 935 x 1640 mm Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials e.g. quartz, glass ball, plastic ball, etc. - With gas pressure springs for quick and easy loading and unloading - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger The air flow is controlled by a foot pedal - Two fluorescent tubes (230 volts) in a separate housing with protective screen and exchangeable protective film - Light switch with double function: suction and cabin lighting are switched on and off at the same time Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be ...
dimensions:: innen 1160 x 870 x 850 mm Air consumption: 400 - 800 l/min. air pressure: 3,4 - 8,0 bar workpiece weight: max. 150 kg total power requirement: 1,2 kW weight: 160 kg range L-W-H: 1320 x 1200 x 1760 mm Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials e.g. quartz, glass ball, plastic ball, etc. - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger The air flow is controlled by a foot pedal - Four fluorescent tubes (230 volts) in a separate housing with protective screen and exchangeable protective film - Switch for suction and cabin lighting Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be used) - Cross struts on the feet easy transport with the pallet truck - Container for blasting material - dust extraction - foot swi ...
UNION BFK-2- CNC Bench Boring Machine Year of construction : 1994 Electrical and electronic overhaul : 2005 Spindle : 130 mm ( Ø ) ISO 50 X : 3,000 mm Y : 1,600 mm Z : 1,200 mm (tower) W : 800 mm ( spindle ) B : 360/1° (turntable) CNC rotary table : 2000 x 1600 mm – 12.5 T Spindle speed : 2,500 rpm Spindle motor : 30 kW Total power : 45 kW Machine weight : 36 T (approx.) Control system Heidenhain : Heidenhain TNC530
Technical data of the pallet rack crossbar: Shelving System: Metal Sistem Type: Unipal The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: yellow Box profile: 140 x 45 mm Clear width: 1,800 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.
- Fixed steady rest 4 units - Fixed table dresser for stone dressing - Face plate head and rear support ca 800 mm - Stone grinding speed 27-24 M/Sec - Coolant and filtration system - In feed stone 0,0025 mm - Acurite Dro with Heidenhain scales - Maximum segment wheel 1600 mm
An unused collaborative welding robot (cobot) Universal Robots with a Migatronic welding power source is available. 1) Cobot Universal Robots UR10, year of manufacture: 2020, load capacity: 10kg, reach: 1300mm, machine dimensions X/Y/Z: approx. 1600mm/600mm/600mm, weight: approx. 30kg, operating hours: 0h. 2) Arc welding power source Migatronic, year of manufacture: 2020. Documentation available. An on-site inspection is possible.
A Ueda Shiko Kikai (Seiko) flatbed die-cutting machine from the 1980s is available. Throughput capacity: approx. 3600 sheets/h, max. sheet length: 1370mm, max. sheet width: 970mm, min. sheet format X/Y: 530mm/300mm, machine dimensions X/Y/Z: approx. 8150mm/2350mm/2050mm, weight: approx. 20000kg. An on-site inspection is possible.
Packing system loaded onto trucks Timber length 3-5m (5.5m) Composed of: Tilting table Alignment roller conveyor Board Splitter Layer conveyors Handovers (5 pieces) Lift table Transport... (Without control cabinet)
SPECIFICATIONS: Machine inlet: 1970 mm Working width: 230 mm Working height: 120 mm Spindles: Ø 40 mm Number of Spindles: 6 Shaft drive Installed power: 38 kW Voltage: 380 V SPINDLE CONFIGURATION: 1: bottom (4 kW) 2-3: right-left (11 kW) 4: top (7.5 kW) 5: bottom (5.5 kW) 6: universal (5.5 kW) EQUIPMENT: Miscellaneous Accessories
x-travel: 3000 mm y-travel: 2000 mm z-travel: 1600 mm spindle diameter: 150 mm spindle taper ISO: 50 spindle stroke: 700 mm spindle turning speed - stepless: 5 - 2500 U/min rapid traverse: 10000 mm/min table surface area: 1600 x 2000 mm workpiece weight: ca. 20 t spindle drive motor: 50 kW feeds x/y/z -stepless: 1 - 9999 mm/min table positioning: 360.000 ° total power requirement: ca. 70 kW weight of the machine ca.: 40 t dimensions of the machine ca.: 6,0 x 8,0 x 4,5 m Horizontal drilling and milling machine / machining centre in cross-table design with: 2005 new 5-axis CNC control Dr. Heidenhain TNC 430 - electronic handwheel HR 410 for all axes with V24 interface, punched tape reader, new electrics, new hydraulics, new servo motors, measuring probe for workpiece measurement - 60-position chain tool changer model WM III k02 - B-axis (table rotary adjustment) 360,000 ° - IKZ - interna ...
Technical data: Printing width: 600 mm Colors: 4 Chamber doctor blade units: 3 Application: Inline with bag-making machine Condition: used Features: • Manufactured by Windmöller & Hölscher (W&H) • Designed for inline use with bag-making equipment • 3 chambers with doctor blades for precise ink transfer • Compact, robust construction for easy integration • Ideal for retrofitting or adding inline print capability
Tenoning spindle: 1 St Number of milling agregates: 4 St. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled -------------------------------------------------------------- The machine was factory overhauled by Weinig in 2024. The control system was also upgraded to a Siemens S 7 677 C, with a new membrane panel Touch. With the following machining units: Crosscut saw -------------------------------------------------------------- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ------------------------------------------------------------- Axially adjustable with crosscut saw Tenon and slotting spindle -------------------------------------------- ...
Working width: 230 mm Working height: 15-120 mm Number of spindles: 2 St. Weinig Hydro Planer Type Uniplan 23 -------------------------------------------------------------------- Machine was factory overhauled by Weinig in 2024. Description: For two-sided horizontal woodworking with two working spindles. Spindle arrangement: horizontal, bottom and top. The two horizontal spindles are equipped with hydraulically tensioned counterbearings without axial adjustment. Built-in straight jointers on both spindles with automatic stone feed, remotely controlled with the hood closed. Machine with continuous, chainless feed, equipped with rubber rollers. Electric up/down adjustment of the spindles according to a mechanical digital display (SIKO). On/off switch for limiting the up/down adjustment. Feed roller pressure pneumatic. Stops and table tops are not adjustable. Machine with steel table tops. ...
Number of spindles: 8 St. Working width: 230 mm Working height: 120 mm Weinig Planing and moulding line ------------------------------- Consisting of the following individual machines: Item 1: Weinig Profimat 23 E, four-side planer, stock number: 2803 5 spindles + glazing bead saw Item 2: Weinig Uniplan 23, stock number: 2804 Fine and hydroplaner with 2 horizontal spindles Item 3: Weinig RF 15, stock number: 2805 Longitudinal-cross-longitudinal conveyor with workpiece return to the operator Detailed descriptions of the machines can be found under the mentioned stock numbers. (Technical specifications according to the manufacturer, without guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SPECIFICATIONS: Heating capacity: 928 kW - 800,000 kCAL/h Maximum operating pressure: 2 bar Fuel: wood waste Electrical power: 10.6 kW COMPLETE WITH: -Damper flap - Chip hopper - Safety thermostat - Operating pressure gauge - Motor variator - Combustion air blower - Spiral screw - Electrical control cabinet - Burner (EcoFlam MAIOR P 35 TL)
Pewag Uninet snow chains, like new!, Ideal for agricultural and construction machinery, the optimal self-cleaning effect ensures smooth running and a comfortable ride!, 8.2mm link thickness, suitable for, 405/70R18, 360/70R20 Continental/Mitas AC70T, 360/70R20 Pirelli/Trelleborg TM700, 375/70R20
Type: Pressant Uni 1N Year of Make: 2009 Capacity: max. 25,000 W/H Hours: >8500 Scope of delivery: Pallet transport at the infeed Collection table at the outlet Intermediate layer lifter Intermediate Layer Magazine Pallet magazine Control Siemens S7 Protective cladding Switchboard
Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm # 6971 Weinig Unicontrol 6 -------------------------------------------- Technical Specifications Summary (Please inquire about any additional accessories included) Item 1: Crosscut Saw ------------------------------------------- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.7 kW > Laser alignment light for detecting the saw cut CNC-controlled length stop -------------------------------------------- > Length 3,500 mm > Electronic length stop including positioned crosscut saw Item 2: Tenon and slotting spindle --------------------------------------------- > Number of tools: 3 (stroke 2 x 100) mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > S ...
Materials: PET, APET, RPET, GRG, GAG, G-PET, PS, PP // Film Width (Max): 700 mm
Neck: PCO 1881 // Output: 12000 U/h
Neck: PCO1880, 1881 // Output: 24000 U/h
used
1 UNITECH stenter type Redevo, year 2014, width 220 cm, 6 fields, gas heating, combined pin and clip horizontal chain, BIANCO finishing padder, MAHLO weft streigthener
General SKU379W1132 LocationBarneveld MakeUniequip TypeUnichromat 1500 Mach.No.8765 Main Features MaterialStainless steel Motor0.79 KW Specified Features - Miscellaneous MaterialStainless steel Capacity1500 l. Motor0,79 kW, 1233 watt, 230 volt Information Year of construction2003 Total height2,08 m CEcheck Floor space1,45x0,80 m Weight250 kg Extra SpecificationsR404a, chamber dimensions 145x128x67 cm, allowable temperature +1°C to +18°C The Unichromat HO_1500 BEM/S is a two-door chromatography refrigerator with glass doors, 2 double sockets in the interior, 1 reinforced and pull-out stainless steel platform and 2 stainless steel platforms that can be adjusted in height. In addition, both side walls are equipped with a large cable entry of 40 mm. The double-door refrigerator is easy to move thanks to the castor wheels. Temperature range: +1°C to +18°C Cooling Syste ...
General SKU316S537 LocationBarneveld MakeGericke Typeingredënten dosering Main Features MaterialStainless steel Motor0.55 KW Inlet diameter250 mm Specified Features - Metering screw MaterialStainless steel 1.4571 (316Ti) Metering screws Metering screwcheck Screw diameter85 Pitch85 Shaft diameter21 Screw length600mm With hoppercheck InletDia: 250mm(2x), Dia: 100mm, 150x150mm OutletDia 145 and 100mm (3x) With motor0,55kW, 400Volt, 1400rpm Screw speed10,5-104 rpm Information Year of construction2010 Mounted on framecheck Floorspace2,3x2,1m Total height3,1m CEcheck Weight1000kg Extra Specificationsfitted with Gericke DBW-300 metering belt specifications: length: 1800mm width: 300mm this dosing unit includes 3 dosing screws: #1 Screw Dia: 85mm pitch: 85mm Length:600 with ribbon mixer:± 165mmx75, Length :250mm #2 screw Dia: 40mm pitch: 30mm length:600mm with rib ...
General SKU347W885 LocationBarneveld MakeLaborTecnic Typemezclador universal No.57.829 Year of construction2009 Main Features MaterialStainless steel Volume80 Ltr. Motor1.5 KW Specified Features - Tumbler mixer Tumbler mixercheck Capacity5l and 30l (max 80 kg) Diameter400 mm Length/Depth300 mm Cylindrical length120 mm Conical length180 mm InletDia. 400 mm OutletDia 70 mm With motor1,5 kW, 230/400 volt, 1400 rpm MaterialStainless steel 1.4552, Stainless steel 1.4301 (304) Information Total height0,85 m Weight300 kg CEcheck Floorspace1,40x0,70 m Extra SpecificationsWith extra pan, dimensions Dia. 170x280 mm :Tumbler mixersLabortecnicMixers > Tumbler mixersBrand > Labortecnic What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ...
General SKU209W124 LocationBarneveld MakeHaagen & Rinau Typeunimix No.301014/1 Year of construction1998 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume200 Ltr. Motor0.18 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacitybruto 260 Ltr. ( netto 200 Ltr.) Vessel sizesDia. 600x1057 mm Dished bottomcheck Dished top sidecheck Manholecheck Dia. 600 mm Top connectionscheck Outletcheck bottom flange DN40 Half coil jacketedcheckVolume 28 Ltr. Max. temperature151°C With turbo stirrercheck magnetic ( agitator is missing) Motor0,18 kW, 220-240 volt, 380-420 volt, 1370 rpm Stainless Steel Reactors MaterialStainless steel 1.4435 (316L) Information Mounted on legscheck Weight430 kg Floorspace1,05x0,90 m Total height1,90 m Extra Specifications- bottom agitator is missing. ...
Engine Brand: IHC/CASE, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/ihc-case-p110-power-unit-u sed/613, , = More information =, , Type: Engine, Year of construction: 1010, Type number: DJA-P110; Transport weight [kg]: 710
UNION SHEET EXTRUSION LINE, for PS for thermoforming sheets up to 1.500 mm wide, Main TR130 extruder with 130 mm screw Ø, 200 kW drive, Elerctrically heated fan cooled barrel., second TR60 extruder with 60 mm screw Ø, 50 Kw drive, 1.500 mm. flat die with flex lip die, 1.500 mm wide 3 roll inclined polishing stack with a.c. drive + inverter individual roll drives., 3 zone thermoregulator, pump group, haul off unit, availability: immediate, working width: 1.500 mm, conditions: good overall conditions, type: flat die
ROMACO NOACK BLISTER PACKAGING LINE, UNITY 300 Year of construction: 2022 Packaging line composed of a single-track blister machine with rotary sealing and a continuous motion cartoner. Modular line ready to be connected to different track & trace systems and end of line packaging solutions. PRODUCTION - Output blisters/minute: 300 max. - Output cartons/minute: 10 – 300 (min-max) - Forming cycles/minute: 100 max. - Die-cutting cycles/minute: 300 max. - Foil width max: 165 mm - Forming area max: 190 × 150 mm - Die-cutting area max: 100 × 150 mm - Forming depth max: 12 mm - Forming material reel diameter max: 700 mm - Lidding foil reel diameter max: 300 mm - Carton dimensions (A × B × C): 35 × 15 × 65 to 105 × 100 × 160 mm (min-max) DIMENSIONS - Machine dimensions (L × W × H): 8,270 × 1,890 × 2,230 mm - Weight (approx): 5,300 kg ...
Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2000 mm Feed motor: 4 kW Feed speed: 5-24 m/min. 1 WEINIG Unimat 23 E Planer and moulder ------------------------------------------ 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ------------------------- Diameter 40 mm Speed 6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ------------------------- Shared motor with left vertical spindle Diameter 40 mm Speed 8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel ...
Code: 0260 Brand: DMC SCM GROUP Model: UNISAND 2000 - CE Standard Automatic wide belt sander with 2 longitudinal units and 1 transverse unit at the inlet for furniture, joinery, custom-made furnishings, panels, wooden doors, window frames, semi-finished products and various - CE Standard Technical data: Max working width 1350 mm Min working width 52 mm Min length 400 mm Min/max working height 4/170 mm Belt feed with variable speed motor Longitudinal abrasive belt length 1370 x 2620 mm Transverse abrasive belt length 150 x 6550 mm Lamellar belt length 140 x 6300 mm Automatic belt centring Automatic table positioning Digital display of working thickness Control panel with dustproof membrane keyboard Electronic system for belt oscillation Rubber-coated pressure rollers Automatic belt centring 1° Group: Transverse Sanding Pad with development 6550 mm and fit ...
Digital Center height 150 mm Circulation over bed 300 mm Center width 1000 mm 3-jaw chuck, Arbor Chip protection Chip tray
Used AVE - Technologies UNIBLOCCO MLK EFS/ESL 12/12/1 filling machine. New: 2006. AVE-Technologies EFS electronic filling systems are based on high-precision technology, guaranteeing high accuracy and high efficiency at all stages of operation. EFS filling machines are suitable for non-carbonated products such as water, fruit juices and nectars, milk, spirits, oils and food sauces in plastic and glass bottles. The set includes a labelling machine and a cap lift.
Form-on multi function clamp - compatible with Doka Framax/Ringer Master †strong, versatile, reliable 🚚 With the Form-on multi function Clamp , you can connect your frame panels in no time. It provides tension-resistant and stiffening connections †whether it’s element, adjustment, or extension connections. This allows you to work safely, stably, and flexibly on the construction site. â The galvanized surface reliably protects against corrosion, while the practical 40 cm length ensures a perfect fit for your formwork solutions. 🔧 And because we know you value efficiency, we deliver the multi function Clamp in a practical packaging unit: 🚚 100 pcs in 1 MWC With the Form-on multi function Clamp, you choose quality that lasts †and a tool that makes your job site smarter. 💪 Price: from € 3 ...
Manufacturer: Soest Type of Machine : Universal Surface Finishing Line – Parquet / Wood Surfaces Year of Manufacture: 2019 Condition: Very good, lightly used Complete Soest universal surface finishing line for oiling, staining, lye treatment, and patination of wood surfaces, especially parquet. Robust industrial design with Siemens frequency-controlled motors and continuously adjustable speeds in forward and reverse. Includes roller coating machine, brushing/spreading machine, and extensive accessories. Components Included: - Roller Coating Machine RCR-400-L Reverse - Brushing/Spreading Machine VP-400-1B-2P-2B - 2 replacement application rollers - Material pump (new, unused) - 4 replacement brushes - Various spreading pads - Pneumatic brush cleaning machine Technical Details: - Maximum workpiece width: approx. 410 mm - Motor control: Frequency-controlled (Siemens) - Speed contr ...
maximum number of results exceeded
please refine your search
