un used for sale

Filter unit, dimensions: 3560 mm x 2050 mm x 2650 mm.

used hydraulic power unit with accumulator, for the operation of a screen changer �

Overview  This carbonator from German manufacturer Unitec GmbH was built in 2001. It was installed between flash pasteurizer and filler. The buffer tank, which is included in the scope as used as a sterile buffer tank between carbonator and filler. The juice factory is planning a completely new processing plant and filler, therefore this equipment is available.  Technical Details  Capacity: 13,000 litres per hour Products that can be processed: beer, cider, soft drinks etc. Max. carbonation levels 0-8 g/l CO2 8200 l buffer tank CO2 content can be adjusted on control panel Siemens S7 control panel Level regulation in the buffer tank was done by flash pasteurizer PLC and would need to be integrated into carbonator plc

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 mm, 350 mm, 200 mm

Travel of the axles: X: 300 mm Y: 350 mm Z: 200 mm Weight: approx. 800 kg

feed pressure: 60 bar liter capacity: 40 l power capacity: 5,5 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 1,2 x 0,8 x 1,55 m No. 4972 Hydraulic Aggeregat 250 l / 60 bar / 40 l/min formerly HEYLIGENSTAEDT Heynumat 10 Drive: 5,5 approx. 300kg ( estimated ) Transport dimensions approx. 1.2 x 0.8 x 1.55 m ( EUR exchange pallet ) Dimension: 1200 x 750 x 1550 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: R1144, Litre: 350, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Grinder, Standing: On wheels, Construction: Combined mixer, pre-chop and emulsification machine with circulation, Motor: 9/18,5 kW - 380 Volt

2,090 litre, Stock number: T3638, Litre: 2090, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 5 pcs., Item: Filter tank, Standing: Hanging in legconsol, Top: Dished, Bottom: Dished, Filter: In the top and bottom, Inner diameter: Ø 800 mm, Total height: H 4240 mm

weight:400 kg 8 clamping jaws each ca. 600 x 210 x 170 mm , hole dia. 22 mm, center distance ca. 170 mm was used for clamping rings on a Vertical Turning Machine

x-travel: 2800 mm y-travel: 1000 mm z-travel: 1200 mm table surface area: 2000 x 800 mm rotary table dia.: 800 mm spindle taper: SK 50 spindle turning speed - stepless: 50 - 2000 U/min max. torque on the spindle: 3000 Nm spindle drive: 30 kW feeds longditudinal/cross/vertical: 2 - 2000 mm/min rapid motion -longitudinal/cross/vertical: 7 m/min control: SIEMENS control: SINUMERIK 850 M no. of tools in magazin: 56 workpiece diameter at full load: 114 mm wotkpiece diameter with 2 vacant positions: 200 mm workpiece length: 400 mm weight of tools max.: 16 kg tool changing time: ca. 8 - 9 sec internal coolant system feed: ja / yes total power requirement: kW weight of the machine ca.: 25,4 t = 5-axis CNC-bed-type milling machine with integrated NC-rotary table and NC-swivelling milling head - Acc.: tool pre-setting device, various tool fixtures, chip conveyor, coolant with high pressure pump ...

bore capacity in steel (diameter): / mm x-travel: 1750 mm y-travel: 1250 mm z-axis: 1250 mm total power requirement: kW weight of the machine ca.: 13 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal lathe Harrison M250 - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Universal lathe Harrison M250 Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Universal lathe Harrison M250 Price: 6000 EUR Download PDF Universal lathe Harrison M250 The machine is in very good condition, not used in production. It served as an auxiliary machine in the maintenance department of the printing house. Technical data: Turning diameter over the bed: 280 mm Turning diameter over the slide: 170 mm Turning Length: 680MM Rotation speed: 40 – 1500/9 step U / min Spindle bore: 35 mm Tailstock taper MK: 3 ...

This 3-axis Unisign uniport 6000 gantry milling machine was manufactured in 2010. It features an impressive X-axis travel of 10,000 mm, Y-axis travel of 1,500 mm, and Z-axis travel of 1,000 mm. The machine is equipped with a powerful 36 kW main drive and a 30-pocket automatic tool changer. If you are looking to get high-quality milling capabilities, consider the Unisign uniport 6000 gantry milling machine we have for sale. Contact us for further details.

Key data: 1600 , 600 , 500

Unisign Univers 4000 (UV 4000) Chassis CNC Vertical Machining Center Table size (2) 825 x 625 mm. Number of pallets: 2 Travel x-axis 1600 mm. Travel y-axis 600 mm. Travel z-axis 500 mm. 4. Axis (rotary table) NC Maximum table load 600 kg Number of tools in the magazine 51 pieces. Maximum spindle speed 12,000 rpm. Tool holder DIN 69871A CNC control Fanuc 21i MB If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a complete overview of our inventory.

General SKU379W1132 LocationBarneveld CEcheck MakeUniequip Main Features MaterialStainless steel Motor0.79 KW Specified Features - Miscellaneous Capacity1500 l. Motor0,79 kW, 1233 watt, 230 volt MaterialStainless steel General TypeUnichromat 1500 Mach.No.8765 Year of construction2003 Floor space1,45x0,80 m Total height2,08 m Weight250 kg Extra SpecificationsR404a, chamber dimensions 145x128x67 cm, allowable temperature +1°C to +18°CThe Unichromat HO_1500 BEM/S is a two-door chromatography refrigerator with glass doors, 2 double sockets in the interior, 1 reinforced and pull-out stainless steel platform and 2 stainless steel platforms that can be adjusted in height. In addition, both side walls are equipped with a large cable entry of 40 mm. The double-door refrigerator is easy to move thanks to the castor wheels.Temperature range: +1°C to +18°CCooling System: Dyna ...

A Unisign CNC 5-axis large-format portal milling machine is available. Portal clearance height: 1200mm, tool stations: 35/53, tool interface: SK50, travel X/Y/Z: 10000mm/2000mm/800mm, table dimensions X/Y: 11750mm/1670mm, max. table load: 2500kp/m², max. table-to-spindle nose distance: 1200mm, main spindle power: 26kW, spindle speed: 6000rpm, feed rate: 24m/min, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 14000mm/5800mm/4000mm, weight: approx. 45t, control: Siemens Sinumerik 840C. Including automatic angular milling head coupling and decoupling, spindle orientation system, rigid tapping, through-spindle coolant, workpiece probing system and two-station pendulum operation. Documentation available. An on-site inspection is possible.

Unicom 6000 groot 5-assig draai- amp; frees bewerkingscentrum (verticaal draaibank met 5-assig freesbewerking) Frezen: - 36 kW vermogen op de spindel - Type: HSK100A - 1 gt; 6000 tpm - 720 Nm - hogedrukkoeling via de spindel 50 bar - Universele frees- en boorkop (2x automatische indexering 2,5°) Draaien: - 70 kW vermogen op tafel - 2 gt; 450 tpm - 25.000 Nm koppel - max swing: dia 2000 mm - max werkstukhoogte: 1330 mm Gereedschapsmagazijn voor draaien en frezen: - Type: HSK100A - 141 posities Tafel: - 3 tafels: Ø 1250 mm / Ø 1600 mm / Ø 1800 mm - automatisch (ont)laden Radio-meetsensor Brankamp botsingsmonitoring Geïntegreerd meetsysteem op de glijbaan Spanentransportband Beeldsysteem met camera en apart scherm Swing over bed: Ø 2000 mm Max longitudinal travel Z-axis: 1000 mm Max cross travel X-axis: 2150 mm Power on the spindle: 70 kW Number of speeds: 2 > 450 rpm (25 ...

Untha RS30 S Motor 2 x 11KW Weight 1.3t 4 Waves Control cabinet Machine is immediately ready for use

full drawer cabinet cca 350 pcs various pinball, thread edging, etc.

x-travel: 10000 mm y-travel: 1500 mm z-travel: 1000 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Copy part head, copy head, part head -Copy head: for lathe -Dimensions: 280/260/H245 mm -Weight: 15.5 kg

sheet width: 300 mm coil weight: 0,5 t coil internal dia.: 480-530 mm coil outside dia.: 1200 mm weight of the machine ca.: 0,3 t dimensions of the machine ca.: BxTxH 1200x1200x1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mm y-travel: 2500 mm z-travel: 1000 mm Control: Siemens type: Sinumerik 840 D Feed: 5-30.000 mm/min Table area: 2000x2170 mm table load: 1500 Kg/m² T-slots: 22 H9 distance between uprigths: 2500 mm spindle turning speed range: 6000 U/min spindle drive: 36 kW spindle taper: HSK 100 Tool changer: 30 Rotary table: 2000 mm speeds: 250 U/min turning diameter: 2500 mm table load: 10 t Torque: 33000 Nm total power requirement: kW weight of the machine ca.: 45 t dimensions of the machine ca.: 8x6,4x4,4 m Gentry gantry milling machine with carousel rotary table Head change station Tool changer The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,0 ...

x-travel: 1600 mm y-travel: 400 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Seven UNIVERSAL MC flat knitting machines are available as a package, 1) UNIVERSAL MC-825 CXL, gauge: E3, year of manufacture: 2004, width: 64in/1630mm, 2) UNIVERSAL MC-835, gauge: E5, year of manufacture: 2004, width: 48in/1220mm, 3) UNIVERSAL MC-720, gauge: E5, year of manufacture: 1995, width: 90in/2300mm, 4) UNIVERSAL MC-720, gauge: E8, year of manufacture: 1995, width: 90in/2300mm, 5) UNIVERSAL MC-720 PJ, gauge: E8, width: 90in/2300mm, 6) UNIVERSAL MC-720 PJ, gauge: E10, width: 90in/2300mm, 7) UNIVERSAL MC-720, gauge: E10, width: 90in/2300mm, documentation partially available, an on-site inspection is possible, not connected to power.

Ekato Unimix Vacuum Processing System SRT 50 Order# 4808/2, Series# 70888. Year of manufacture 2004 Description • GMP compliant • EKATO PARAVISC agitator with EKATO UNIMIX scraper system Power 3 Kw, 5.2 Kw at 87 Hz Speed 21-121 rpm • Patented homogenizer EKATO UNIMIX S-JET, located at the lowest point of the container, for internal and external homogenization Power 5.5 kW, 9.5 Kw at 87 Hz Speed 1,000 – 4,800 rpm • Lid lifting device can be swivelled • Integrated CIP cleaning system • Integrated heating/cooling system Electric heating 12 Kw Control Siemens S7 with OP 17 Pressure and vacuum resistant with integrated vacuum system Product space: Capacity 85 litres / 50 l usable volume, Pressure -1/2 bar, Temperature 10/152 °C, Thermal system / double jacket: Capacity 11 l Pressure -1/+4 bar, Temperature 10/152 °C, Complete document ...

Homogenizing Mixer Manufacturer: Ekato Unimix Type SRT 50 Order# 4808/2, Series# 70888. Description • GMP compliant • EKATO PARAVISC agitator with EKATO UNIMIX scraper system Power 3 Kw, 5.2 Kw at 87 Hz Speed 21-121 rpm • Patented homogenizer EKATO UNIMIX S-JET, located at the lowest point of the container, for internal and external homogenization Power 5.5 kW, 9.5 Kw at 87 Hz Speed 1,000 – 4,800 rpm • Lid lifting device can be swivelled • Integrated CIP cleaning system • Integrated heating/cooling system Electric heating 12 Kw Control Siemens S7 with OP 17 Pressure and vacuum resistant with integrated vacuum system Product space: Capacity 85 litres / 50 l usable volume, Pressure -1/2 bar, Temperature 10/152 °C, Thermal system / double jacket: Capacity 11 l Pressure -1/+4 bar, Temperature 10/152 °C, Complete documentation in ...

Manufacturer: Universum J. Kasper GmbH Type: LWT 3/80 Prem-50J-EB2W/40 A used Universum cone winder and pretzel roller is currently for sale and immediately available in our warehouse in Bielefeld. Universum Cone Wrapper / Pretzel Long Roller Type: LWT 3/80 Prem-50J-EB2W/40 More information and pictures on request.

Various used extruder screws of the brand Bekum & Uniloy - S30 to S100 - good condition - tested - immediately available Various used extruder screws of the brand Bekum & Uniloy - S30 to S100 - good condition - tested - immediately available

Amico Uniflair SDC0200B precision air conditioner Model No.: SDC0200B Coolant Type Water Fan/s: Vent. with forward-drawn Shovel Power Voltage Device: 230V/1ph/50Hz SERVICE CONDITIONS Drying Ball Temperature 24.0 °C Wet bulb temperature 17.1 °C Relative humidity 50 % Altitude a.s.l. 0 m Air back pressure 20 Pa Entry Temp. d.Coolant 7.0 °C Outlet temp. d. Coolant 12.0 °C Glycol content 0 % Freezing temperature 0.0 °C Coolant flow rate 1237 l/h Coolant flow rate 0.34 l/s SERVICES AND FEATURES Total cooling capacity 7.2 kW Sensitive cooling capacity 6.4 kW Total net cooling capacity 6.7 kW Net sensitive cooling capacity 5.9 kW SHR 89.0 % EER ( Cooling Capacity / System Power Consumption 13.9 kW/kW Air flow rate of air conditioner (dry) 1600 m³/h Air flow rate of air conditioner (dry) 0.44 m³/s Air temperature outlet/unit outlet 12.9 °C Relative humid ...

Univap TCM/E 5ED Evaporator with electric defrost unit 2021, Evaporator with electric defrost unit, comes with controls and external KD external fridge plant

This 6-axis Universal Robots UR10 was manufactured in 2015. It features a load capacity of 10 kg and a working range of 1300 mm, making it suitable for various applications. If you are looking to get high-quality collaborative capabilities, consider the Universal Robots UR10 machine we have for sale. Contact us for further details.

This 6-axis Universal Robots UR5e was manufactured in 2019. It features a payload capacity of 5 kg and a reach of 850 mm, making it suitable for various automation tasks. If you are looking to get high-quality robotic capabilities, consider the Universal Robots UR5e robot arm we have for sale. Contact us for further details.

1 Gebr. Hose press Uniflex HM 18.2, built in 1982 Technical data: Manufacturer: Uniflex-Hydraulik GmbH Model: HM 18.2 (robust production hose press with the proven, lubricant-free plain bearing technology for less wear and cleaner work) Application / Suitable for: 2-wire hoses: up to DN 60 4-wire hoses: up to DN 60 6-wire hoses: up to DN 50 Press jaws / tools: Number of press jaws per set: 8 pieces Overall dimensions (W x D x H): approx. 780 x 860 x 1,500 mm Electrical connection: 400 V / 380 V (three-phase current) Motor power: approx. 7.5 kW Typical features Plain bearing technology: Requires no grease, which means that dirt and scale do not stick to the crimping jaws, minimizing wear and extending the service life. Control: A wide range of programs can be selected (fully automatic, semi-automatic, manual control) for precise and repeata ...

A used wrapping machine Universum 50/70-3MM EB3 is currently for sale. These and many other machines are immediately available in our warehouse in Bielefeld. Universum 50/70-3MM EB3 Horn Winding Machine Winding Machine - Winding machine for wrapping croissants, croissants, etc. - Machine is completely rebuilt - all straps renewed - 400 volts 50 Hz - Year: 2008

This 6-axis Universal Robots UR10e cell was manufactured in 2020. It features a load capacity of 10 kg and a range of 1300 mm. Weighing 33.5 kg, this robot arm is designed for tasks requiring precision and flexibility. Consider the opportunity to buy this Universal Robots UR10e cell. Contact us for more information.

Used cone wrapping machine Universum 50/70The machine needs to be overhauledManufacturer : Kasper UniversumType : 50/70400 V 50Hz 1,1AAn rollersRoll out croissant pretzel sticks, roll out spots, fold in ribs, roll out pretzel strands and braid strands. The Universum 50/70 croissant wrapping machine is a special machine used in bakeries and pastry shops to shape and wrap croissants or croissants. This machine helps to portion, shape, and wrap the dough for croissants automatically, which makes the process more efficient and faster. The

Cone wrapping machine with dough strand long moulder Universum 40/60 EZ Manufacturer : Universum Type : 40/60 EZ 380 V 50Hz On rollers Roll out croissant pretzel sticks, roll out spots, fold in ribs, roll out pretzel strands and braided strands. Details see picture

Control unit, control panel, control panel, control unit, keyboard, screen, control, two-hand control panel -Manufacturer: Unseld, two-hand control panel from Dorstener APE80-3050 press brake -Type: SEP03.0.L1/stand STP 01.4.1 -Accessories: including foot switch -Dimensions: Ø 500 x 1000 mm -Weight: 23 kg

A used Universum cone winder and pretzel roller is currently for sale and immediately available in our warehouse in Bielefeld. Universum Cone Wrapper / Pretzel Long Roller Type: LWT 3/80 Prem-50J-EB2W/40 More information and pictures on request.

x-travel: 4000 mm y-travel: 2500 mm z-travel: 1500 mm bore diameter: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The UNION KC 110 CNC boring mill in rigid T-type cross-bed design offers outstanding precision, power and reliability for efficient complete machining of prismatic workpieces. Equipped with a HEIDENHAIN iTNC 530 control, a 110 mm spindle and continuously variable spindle speeds up to 3,000 rpm, the machine is designed for demanding heavy-duty machining applications. With travels of X 2,500 mm, Y 2,000 mm and Z 1,500 mm, the UNION KC 110 is perfectly suited for large-scale machining tasks in modern production environments. Additional highlights include a 60-position automatic tool changer, high-pressure coolant system and an extensive refurbishment package ensuring long-term performance and accuracy. The data for this ad was cr ...

This 6-axis Universal Robots UR10 was manufactured in 2018. It features a maximum payload of 10 kg and an impressive reach of 1300 mm. This industrial robot arm is designed for versatility and efficiency in various applications. If you are looking to get high-quality automation capabilities, consider the Universal Robots UR10 robot arm we have for sale. Contact us for further details.

This 6-axis Universal Robots UR10 was manufactured in 2014. It features a load capacity of 10 kg and a working range of 1300 mm, making it suitable for various applications. If you are looking to get high-quality collaborative robot capabilities, consider the Universal Robots UR10 machine we have for sale. Contact us for further details.

General SKU291Y515 MakeUnknown TypeUnknown No.Unknown Year of constructionUnknown LocationBarneveld Main Features MaterialStainless steel Motor11 KW Inlet diameter50 mm Specified Features - Inline mixer Colloid millcheck Colloid mill in linecheck Rotor sizesø 160 x 30 mm Teethed rotorcheck Inletø 50 mm Outletø 55 mm Motor± 11 kW With variable speed drivecheck Inline high shear mixers MaterialStainless steel 1.4408 General Mounted on wheelscheck With switchcheck Floorspace0,8 x 0,8 m Total height1,3 m Weight500 kgGeneric medicinesOintmentsBiotechnologyAgrochemicalsCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal feedConfectioneryBeveragesDyes & pigmentsInline high shear mixersOils & fatUnknownIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndustrie ...

Chopper Untha – Four-Wave Hacker Type: RS 30-4-S Year of manufacture: 8/2007 CE 4 waves of hackers 2 motors of 11 kW each Perforated mesh diameter 20 mm Cutterbar opening 450 x 560 mm Filling opening L1000 mm x W 1280 mm Hopper height 1040 mm Main shaft speed approx. 23 rpm. Speed secondary shaft approx. 34 rpm. Operating hours 2681 h Workplace-related sound pressure level approx. 84 dB (A) Sound power level approx. 97 dB (A) The material to be shredded is pulled in by the cutting unit and pre- and post-shredded in a single operation by the main and secondary cutting unit. Dimensions: L 1340 mm x W 1090 mm x H 1920 mm Weight: 1240 mm

The Unicraft SHT 2000 hydraulic scissor lift table offers a reliable solution for your lifting projects, e.g. for manually feeding whole stacks of timber into a planer or saw. With an impressive load capacity of 2,000 kg and a robust design, this lifting platform is ideally suited for use in industrial environments. This scissor lift table stands out for its precision and user-friendliness, enabling you to lift heavy loads safely and efficiently. With a maximum table height of 1,010 mm, the Unicraft SHT 2000 is the ideal choice for improving your workflows and reducing strain on the machine operator’s back. Technical data: Load capacity: 2,000 kg Minimum table height: 190 mm Maximum table height: 1,010 mm Table surface: 800 x 1,300 mm Cable length: 3 m Safety standard: EN 1570 Drive: Electro-hydraulic Motor: 1.5 kW Condition: New with warranty Condition: Neu Location: Tauber ...

For sale is a new Universal Robots UR12e collaborative industrial robot in original packaging (orig. packaging). The UR12e is a versatile 6-axis cobot for industrial automation tasks and offers a payload of up to 12.5 kg with a reach of 1,300 mm. Technical data: Manufacturer: Universal Robots Model No.: UR12e Robot Type: 6-Axis Collaborative Robot/Cobot Payload: 12.5 kg Reach: 1,300 mm Repeatability: ±0.05 mm Robot arm protection class: IP54 Condition: New / orig. box Country of manufacture: Denmark

for crushing fruit and vegetable tins made of plastic and cardboard, Packing material dimensions max W 450 x max H 450 mm L unlimited with 1 discharge conveyor belt, B=500 mm with 1 big-bag holding device with extractor belt

Qty. 1 Second-hand recoiler Mfc.: United Type: Q610 mm Built: 1958 Model: Reversing Coiler right to left Capacity: Max. 45 ton

Hydraulic rescue scissors operated with hydraulic pump (630bar) internal combustion engine. To be used as e.g. cable scissors for use in areas without power supply. 1 set with fuel-powered hydraulic unit 1 hydraulic scissors 1 hydraulic spreader All the goods in very good, ready-to-use condition. Special price