un used for sale

Current consumption: 230 V, 1 phase, 50/60 Hz Power: 150 VA / 0.65 A Compressed air: 4–6 bar Air consumption: 51 l/min Please note: Lot 2 and lots 51-56 are sold only with reservations. The seller still has to confirm the bid Lot 2: the complete processing line. There you will also find a video on the individual process steps and machines Lot 51-56 Individual parts of the machining line. These are the same parts as Lot 2. Either Lot 2 OR Lot 51-Lot 56 is sold Auction-ID: A7-50858-54

Doses product into trays under a weigher, The JASA filling station from 2015 sits under a weigher and catches the weighed portions in a hopper. Two flaps drop the product into the tray below, so you can fill trays of vegetables, fruit or salads neatly and without spillage., The station stands on a mobile stainless frame and has its own control box with on/off and two adjustable fill times. It runs on 230 V., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/jasa-tray-filling-station/, Type: Tray filling station, Filling: Hopper with two flaps, Controls: On/off and two adjustable fill times, Electrical: 230 V, Construction: Stainless frame on castors

Three-pump vacuum unit with control cabinet for food processing plants, This used unit consists of three Bora vacuum pumps, type SAP 450, mounted on a single shared frame. Each pump has a filter housing on top and all three are connected to a common manifold. The accompanying control cabinet holds three Omron Hitachi frequency inverters (JX series, 4 kW, 400 V). It also contains a Moeller controller with display and motor protection switches. Three rotary switches are fitted in the door. The frame stands on adjustable feet., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/bora-2/, Type: Vacuum unit with three pumps and control cabinet, Pumps: 3 × Bora SAP 450, on a shared frame with common manifold, Frequency inverters: 3 × Omron Hitachi JX, 4 kW, 400 V, Controller: Moeller controller w ...

container depleted, toilets closed on lock(no key) Auction-ID: A1-50627-16

5 wooden shelves; Easy assembly; Delivered in package; unused; 3862 Auction-ID: A1-50865-683

5 wooden shelves; Easy assembly; Delivered in package; unused; 3862 Auction-ID: A1-50865-680

Type: Fold-out house Surface area/ Volume: approx. 28 m²/ 69 m³ Door: Lockable door Windows: - 7 sliding windows - 1 tilt window Floor: Vinyl floor Sanitary: Without sanitary facilities Extra facilities: - Adjustable legs - Step stool - 2 hand winches to lower the floor - Lifting eye - Spoon slots available Unused Transport dimensions (folded): 5890 × 720 × 2550 mm Auction-ID: A1-50865-49

container worn out, corroded frame, sheet metal and hole in the roof Auction-ID: A1-50627-13

5 wooden shelves; Easy assembly; Delivered in package; unused; 3862 Auction-ID: A1-50865-676

Control: Grundig Numerik NC Pilot Table dimensions: 800x360 mm The machines are generally offered without documentation. If documents are available, they are attached to the respective machine. Auction-ID: A7-50868-3

UNUSED IN ORIGINAL PACKAGING Auction-ID: A1-50766-437

5 wooden shelves; Easy assembly; Delivered in package; unused; 3862 Auction-ID: A1-50865-682

Manufacturer: LAGUN Year: 1991 Type: CNC universal milling machine Numerical control: Heidenhain TNC 355 Axes: 3 axes (X, Y, Z) Strokes: X 1100 mm / Y 600 mm / Z 600 mm Table: 1200 x 550 mm Spindle: 50 to 3000 rpm – motor power 20 kW Equipment: HURON universal head type, coolant system Remarks: Robust CNC universal milling machine for heavy and versatile milling. Auction-ID: A1-50714-4069

Manufacturer: VOLLMER / ELITE Working parameters: Universal manual grinding machine for sharpening and grinding cutting tools. Equipment included: longitudinal table with T-slots, swivelling grinding head, grinding wheel, swivelling and adjustable tool holder, manual movements via handwheels and integrated electric controls. Auction-ID: A1-50714-4307

5 wooden shelves; Easy assembly; Delivered in package; unused; 3862 Auction-ID: A1-50865-677

5 wooden shelves; Easy assembly; Delivered in package; unused; 3862 Auction-ID: A1-50865-675

UNUSED IN ORIGINAL PACKAGING Auction-ID: A1-50766-438

more details see photos Auction-ID: A7-50868-67

OKK VC-X350L 5-axis continuous vertical machining center with turning function (C-axis), Fanuc 31i-A5 control. Machine from 2011 in very good condition, very well equipped, in operation. Features Brand / Model: OKK VC-X350L Serial No.: 125 (Manufacture No. MAJ15026) Year of Manufacture: 2011 CNC Control: Fanuc Series 31i-Model A5 with Data Server 5-axis continuous with TCP function Spindle: 12,000 rpm, BT 40 taper Turning function (C-axis): 1,000 rpm Coolant center high pressure 40 bar Coolant refrigeration unit Renishaw OMP60 workpiece probe Renishaw TS27R probe Tool magazine: 60 positions Power supply: 380 V / 50 Hz / 3 phases – 54 kVA, current 82 A Equipment and accessories included Set of 60 tool holders of different types Chip conveyor Fanuc data sheet and original purchase invoice provided History and condition Spindle completely ...

Manufacturer: CME Year: 1991 Type: CNC Universal Milling Machine Numerical Control: Heidenhain TNC 124 Axes: 3 Axes (X, Y, Z) Strokes: X 1100 mm / Y 700 mm / Z 500 mm Table: 1400 x 450 mm Spindle: ISO / SK 40 – 40 to 1800 rpm – motor power 10.6 kW Dimensions: 2400 x 2150 x 2100 mm Weight: approx. 3800 kg Notes: Robust universal CNC milling machine made in Spain. Auction-ID: A1-50714-4076

5 wooden shelves; Easy assembly; Delivered in package; unused; 3862 Auction-ID: A1-50865-678

ul> CNC control: Heidenhain TNC 530 5-axis (B-axis head ±90°, C-axis table 360°) Strokes: X = 1060 mm, Y = 710 mm, Z = 710 mm Spindle speed: 20 – 12,000 rpm Spindle power: 15 kW Cone: ISO40 Fast feeds: 30 m/min Table: 1500 x 795 mm Max table load: 900 kg Tool magazine: 32 positions Spindle centre coolant + refrigeration unit + mist suction Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-50714-4006

see photos for more details Auction-ID: A7-50868-48

5 wooden shelves; Easy assembly; Delivered in package; unused; 3862 Auction-ID: A1-50865-681

container worn out, corroded roof sheet metal, frame Auction-ID: A1-50627-12

5 wooden shelves; Easy assembly; Delivered in package; unused; 3862 Auction-ID: A1-50865-684

Unused; toilet; shower; washbasin; medicine cabinet; forklift slots; crane hooks; ventilation; cold hot water connection; marble look; 220v connection; 2 sockets; Auction-ID: A1-50865-48

Working parameters: Universal manual grinding machine on a rack for tool sharpening. Equipment included: longitudinal table with T-slots, swivelling tool head, spindle/grinding wheel with protective housing, manual adjustments via handwheels, visible dial dial and pneumatic device. Notes: Industrial cast iron construction. Auction-ID: A1-50714-4302

5 wooden shelves; Easy assembly; Delivered in package; unused; 3862 Auction-ID: A1-50865-679

CONTROLS   CNC controls HEIDENHAIN ITNC 530 BASIC DESIGN   basic design: moving column WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 5   X-axis travel: 3000 mm   Y-axis travel: 1000 mm   Z-axis travel: 1100 mm TABLE   table surface (left-right): 3000 mm   table surface (front-back): 1035 mm SPINDLE / HEAD   tool fixture: HSK A63 TOOL MAGAZINE   tool manipulator: change gripper ELECTRICAL SPECIFICATIONS   mains power supply: 60 kVA   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 14000 mm   space requirements -front/back-: 3760 mm   total height: 3770 mm   total weight approx.: 24000 kg ATTACHMENTS   tool breakage detector: yes   zero-point workholding system: yes   chip conveyor: yes   band filtration unit: yes   closed cabin: yes   European CE standards: yes ...

CNC control: Heidenhain TNC 530 Machine 5 simultaneous axes Strokes: X = 730 mm, Y = 560 mm, Z = 560 mm Spindle speed: up to 12,000 rpm Cone: SK40 Feeds: 20 – 20,000 mm/min Fast feeds: 30 m/min Table: 1000 x 600 mm Max load table: 800 kg Tool changer: 24 / 30 positions Machine hours≈ 31,481 h Spindle hours≈ 25,087 h Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-50714-4011

x-travel: 620 mm y-travel: 420 mm z-travel: 400 mm turning speeds: 50- 4000 U/min total power requirement: 17,5 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 2,0 x 2,7 x 2 m Description: - excellent condition - Heidenhain ND780 digital readout - infinitely variable speed control - infinitely variable feed drives - hydraulic tool clamping - mechanical handwheels - electronic handwheel - drilling quill - horizontal milling spindle - coolant system X-travel 620 mm Y-travel 420 mm Z-travel 400 mm Spindle taper ISO 40 DIN 69871A Spindle speeds 50 - 4000 rpm Table size 800 x 400 mm Table load 400 kg Feed rates infinitely variable, max. 2000 mm/min Rapid traverse 5 / 4 m/min Drive power - milling spindle (S1) 10.5 kW Quill stroke 80 mm Coolant system Operating voltage 400 V Total power requirement 17.5 kW Machine weight approx. 1.9 t Space requirement approx. 2.00 x 2.76 x  ...

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmSpeed max.12000 rpmDrive power (100% DC)9 kWDrive power (40% DC)13 kWTorque (100% DC)57 NmMax. torque83 NmTool Magazine with24 PositionsSpindle taperSK 40 DIN 69871 Movement X / Y / Z550/550/510 mmRapid feed X / Y / Z24/24/24 m/minDimensions (L x W x H)3,07 x 2,67 x 2,84 mWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm) Tropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperature SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872 Signal lamp with 4 colours standardSignal lamp with 4 colours Red: General error Yellow: Intervention nec ...

- Includes: - 1 x OLEOMEC hydraulic power unit: 3 KW-1430 rpm motor, maximum pressure 100 Bars. - 1 x OLEOMEC hydraulic power unit: 4 KW-2850 rpm motor, maximum pressure 100 Bars. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-58

- Total installed power 16 KW. - Part length from 240 mm to 3000 mm. - Maximum part width from 240 mm to 1200 mm. - Part thickness from 10 mm to 40 mm. - Maximum part weight 50 kg. - Maximum pile height approx. 1500 mm. - Production capacity between 12 and 15 cycles/min. - Head with suction cups, vacuum pump with 3 KW motor. - Output transfer of roller-belts motorized at 90°, dimensions approx. 3900 x 2600 x 1000 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-22

Lathe STANKO 1M63/2800

Hydra Rig / NOV Hydraulic Spooler Unit Manufacturer: Hydra Rig / NOV Completion & Production Solutions Country of manufacture: United Kingdom Manufacturing date: 02/2020 Equipment type: Hydraulic Coiled Tubing Spooler Unit Location: 84107 Bratislava Heavy-duty hydraulic spooler unit designed for handling, supporting and spooling coiled tubing and reel assemblies in drilling and well-service operations. Skid-mounted construction with an adjustable reel-support arrangement. Configuration / equipment: Hydraulic reel-support arms Powered drive assembly / gearbox Hydraulic cylinders Hydraulic hose assemblies Control and manifold components Adjustable reel-support arrangement Heavy-duty skid-mounted frame Note: Reel / drum is not included with the photographed unit. Condition: Never used. Operational condition and hydraulic functionality have not been verifie ...

on stainless steel column; incl. digital readout; \"Toshiba\" label printer and \"Alup\" refrigerant dryer Auction-ID: A1-50542-19

x-travel: mm y-travel: mm z-travel: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Extraction system Spänex -as good as new - SPÄNEX extraction, filter and transport system with clean air side Arranged extraction fan with max. 27000 m³/h air output Year of manufacture 2023 CE As good as new – only approx. 20 hours of operation Filter type: FA V/2000-VE-630-37-B-V-F-6-2,2 Filter area 180 m² Filter air flow max. 27000 m³/h Residual dust content less than 0.1 mg/m³ Mode of operation discontinuous Chip buffer volume 6 m³ Motors: 1 x vibration – 0.16 kW, 1 x discharge 2.2 kW, 400 V / 50 Hz Dimensions: L 2.9 x W 2.9 x H 7.3 m Built-in fan type: SU-630-A003-37-M Volume flow max. 30,000 m³/h Total pressure difference max. 4500 Pa Operating point 27000 m³/h Total pressure difference 3800 Pa Fan efficiency 86 % Power requirement 33.5 kW Exhaust fan soundproofed Motor power 37 kW 400 V/50 Hz, IE 3 Weight approx. 5800 kg (with filled chip contai ...

WAF type VZ hook ampliroll container, built in 2007 and intended for the transport and handling of bulk materials, rubble, earth and other construction materials. The container has a capacity of 10.33 m³, a length of approx. 6.10 m and a width of approx. 2.50 m. Its robust construction incorporates Hardox wear-resistant steel, as confirmed by the marking on the container. Equipped with a hook/ampliroll truck gripping system and a double rear door, allowing full access to the crate when unloading. Presence of red and white reflective traffic signs. Professional container with a state of use corresponding to its age and use, with a box, floor and walls visually presenting a good general integrity. 5. Key Elements WAF Manufacturer Type VZ Year 2007 Capacity 10.33 m³ Dimensions: approx. 6.10 × 2.50 m Ampliroll / hook system Construction with Hardox wear-resistant steel Do ...

USED NOVAXESS SPRINKLER UNIT TYPE HP70B PRO WITH OIL COOLING Serial No.: 6694 Year: 2018 Equipped with 1 HP 70 bar pump with flow rate 30 liters/minute 1 930 liter oil tank 1 Hydraulic lifting kit 1 Duo of cartridge filters mounted 90μ + 10μ series 1 Hyfra cooling unit type Gama 13 Dimensions and weight 2500x1100xH1600 mm - weight 450kg Auction-ID: A1-50950-60

Feed rate 8-400 mm/min, rapid traverse 1340 mm/min, incl. 3-axis digital display and hydraulic machine vice Auction-ID: A1-50626-5

Control: Haas X-axis: 1016mm Y-axis: 508mm Z-axis: 635mm Table size: 1219mm x 457mm Max. workpiece weight: 1588kg Spindelsnelheid: 7500rpm Spindle taper: BT-40 Spindel motor power: 15 kW Positions on toolchanger: 20 Machine dimensions: Length: 3200mm Width: 2450mm Height: 2650 mm Weight: 5670kg Machine is equipped with: - chip conveyor - programmable coolant nozzle - tooling as showed in pictures Auction-ID: A1-50690-17

Specifications: X-axis: 400mm Y-axis: 560mm Z-axis: 400mm A-axis: +120° ~ -30° C-axis: 360° Machine is equipped with: - chip conveyor - through spindle coolant - oil cooler - 40 position ATC Auction-ID: A1-50690-18

UNIVERSAL MILLING MACHINE Inv. No. 12.315J1 Make INDUMA Model NL87 Serial number 75479 Table dimensions 2200 x430 mm Longitudinal travel (X) 1500 mm Cross travel(Y) 420 mm Vertical travel (Z) 530 mm Taper ISO 50 R.P.M. 36 – 1,350 (16x) HP 25 Volts 400 Cycles 50 Including: Universal Milling Head Coolant Auction-ID: A1-50718-26

Auction-ID: A1-50718-42

Machine is equipped with: - chip conveyor - through spindle coolant - Heidenhain handwheel - coolant filtration system - 30 position ATC Auction-ID: A1-50690-20

Platform extended 5000mm long platform retracted 3300mm Auction-ID: A1-40984-121

A specialized motorcycle trailer for transporting motorcycles, equipped with a tilting drawbar and a ramp that is concealed under the loading platform. The chassis is made of curved profiles made of galvanized sheet steel and is equipped with numerous lashing points for lashing straps. The adjustable wheel clamp ensures that the motorcycle is securely and securely secured during transport. Auction-ID: A3-46136-17643