135,042 used machines on RESALE, but how to find them? Machine Search
Mopac MKM-1-6000-2500 Sandwich Panel Production Line – Unused Specifications: Brand: Mopac Type: MKM-1-6000-2500 Application: Sandwich Panel Production Condition: Unused Maximum panel length: 6,000 mm Maximum panel width: 2,500 mm Number of press cylinders: 52 Connection: 400 V Maximum machine weight: 15,300 kg Total machine dimensions: approx. 22,000 x 5,200 x 2,500 mm Dimensions of compacting surface: approx. 2,600 x 6,000 mm Conveyor belt width: approx. 2,600 mm Conveyor belt length: approx. 8,500 mm Features: Conveyor belt Overhead bonding installation Conveyor belt Adhesive installation with laser control Granulate supply from big-bag Mopac Pneumatic Panel Press 52 pneumatic press piston machines Handbook Particularities: Unused production line for sandwich panel production Suitable for panels up to 6,000 x 2,500 mm Pneumatic panel press equipped w ...
Technical data Article: Universal dividing head with machine vice Three-jaw chuck: Ø approx. 135 mm Vise jaw width: approx. 150 mm Vise version: swivelling Condition: used Configuration Partial head: available Three-jaw chuck: available Handwheel: available Machine vise: available Degree scale: available Scope Included are universal dividing head with three-jaw chuck and a swivelling precision machine vice with angle scale. Auction-ID: A1-50643-5
Unused, Hatz diesel engine, electric start, forward/reverse Auction-ID: A1-47392-111
Equipped with insulated walls and roof; 2 bedrooms; living room with corner kitchen; bathroom with shower, toilet and sink; each room equipped with lighting and sockets 230V; meter cupboard; PVC floor; aluminum windows and doors; lockable; water, electricity and drainage can be easily connected is prepared; unused and ready for transport (note furniture not included) (transport dimensions 590x220x248 cm, weight 3100 kg) Auction-ID: A1-47447-41
Equipped with clean entrance; dirty entrance; battery; diesel heater; Auction-ID: A1-47392-279
(PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Auction-ID: A1-47392-79
New, Material is available on location to load container. Auction-ID: A1-47419-213
Technical data Manufacturer: Wilhelm Kocherscheidt, Kempen-Nrh. Machine type: Universal milling machine with special design Model: MFM Configuration Horizontal spindle available Cross table with manual adjustment Pneumatic clamping device Workpiece pick-up between tips Protective cover over processing area Retrofitted control cabinet with emergency stop Special body available for special machining tasks Auction-ID: A1-50643-36
A Keller extraction system in need of repair is offered for sale. Extraction capacity: 7500m³/h, negative pressure: 250daPa, extraction ductwork: DN355/DN400, exhaust stack: DN560 including silencer, fan type: MAE 025-012530-00, shaft power: 6.89kW, speed: 2915rpm. A service check including inspection of the filter elements and air-flow measurements was carried out in 2024. This revealed increased differential pressure across the filter cartridges, leaks and insufficient air flow. Including wall bracket. Documentation available. An on-site inspection is possible.
turning diameter over bed: 510 mm turning diameter over slide rest: 310 mm centre distance: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m turning length: mm 3-jaw chuck (diameter 250mm) tool holder device tail stock 3x steady rest Technische Daten / technical details: Spitzenweite / center to center 2000 mm Umlaufdurchmesser über Bett / rotary diameter over bed 510 mm Umlaufdurchmesser über Schlitten / rotary diameter over sledge 310 mm Spindelbohrung / spindle hole 52 mm Drehzahlbereich / spindle speed 44-2240 UpM /rpm Gewicht der Maschine ca. / weight ca. 2500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
POS PosMill Type 1100 3-axis CNC milling machine Vertical CNC machining center with a machine table of approx. 1,050 x 600 mm. Equipped with a CNC control HEIDENHAIN TNC 430. Automatic tool changer. Equipment: Cooling system with IKZ, hydraulic system and chip conveyor. Auction-ID: A7-50677-25
POS PosMill Type C1050 – Universal Milling Machine Universal milling machine with travel distances X 1,050 mm / Y 530 mm / Z 630 mm and table size 1,150 x 560 mm. CNC control HEIDENHAIN iTNC 530. Hydraulic system for precise movements. Equipment: Coolant system and chip conveyor. Machine with protective devices and emergency stop system. Auction-ID: A7-50677-1
Manufacturer: Hermle Model C 12 U Year 2018 Condition Used Stock number 9565 Heidenhain TNC 640 control system Switch-on hours 17121 h Operating hours 7065 h Number of Stack Positions 36 Table diameter 320 mm Maximum table load (even) 100 kg Number of axles 5 pieces X-axis travel 350 mm Y-axis travels 440 mm Travel Z axis 330 mm Maximum vertical spindle speed 18000 1/min Taper HSK-63 Machine weight 7200 kg Additional Magazine ZM35 High-pressure cooling max. 80 bar Paper filtration Renishaw Workpiece Probes BLUM LC50 Tool Measuring System
unused low-loader, max permissible mass 60000kg, air suspension Wabco, Hydraulic tailgate Belgian registration Auction-ID: A1-50335-12
GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmMaximum load (table centre)1000 KgSpeed max.12000 rpmDrive power (100% DC)11 kWDrive power (25% DC)15 kWTool Magazine with60 PositionsSpindle taperBT 40 Movement X / Y / Z1100/560/510 mmRapid feed X / Y / Z36/36/30 m/minDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont) Spindle Taper 7/24 Taper #40/ Grip MAS <BT40>Spindle Taper 7/24 Taper #40/ Grip MAS <BT40> This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately. Retention Kn ...
GeneralVertical Machining centre; Control: DMG MORI ERGOline X Multi-Touch control CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z42/42/42 m/minSpindle speed range 20 to 12.000 rpmSpindle speed range 20 to 12.000 rpm AC main drive:13/9 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872 Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring System Production Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar - Chip conveyor (scraper type) with tank capacity: 200 l(left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electronic handwhe Air coolant internal (through spindle centre)Air Coolant Internal (through spindle centre) switchable via M-F ...
Mikron HSM 800 – High-speed machining center built in 2007 | Heidenhain iTNC 530 | 24,000 rpm | High-precision CNC machining center from Mikron / GF AgieCharmilles, designed for demanding HSC machining in mold making, graphite and electrode areas as well as for flexible series production. Travel distances of X 800 mm / Y 600 mm / Z 500 mm with a pallet size of 800 x 600 mm. Equipped with a 3-fold pallet changer for efficient production processes. The machine has a high-speed spindle with up to 24,000 rpm, HSK-A63 adapter and a 50-fold tool changer. Extensive equipment including IKZ high-pressure system (18–70 bar) with belt filter, chip conveyor, minimum quantity lubrication, oil mist extraction, rotating viewing window and measurement technology (M&H). Additionally equipped with APS (Advanced Process System) and ITC (Intelligent Thermal Control) for maximum process reliabil ...
GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Longitudinal350 mmCross420 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWTorque (100% DC) 41 NmTorque (40% DC) 48 NmSpeed range 20 - 15000 rpmSpindle taper BT 30 Clamping System ISO 7388-3 - JD30 Toolchangertoolchanger Type of magazine Wheel Number of tools 15 TableTable surface 740 x 420 mmMaximum load (table centre) 400 KgPreparation NC-Devider EA510 indirectPreparation 4.th axis Lehmann EA 510.L indirect measuring System Attention: Customer specific optimisations and adjustments are not part of delivery! Chip removal package with chip conveyorChip removal package with chip conveyor ...
GeneralVertical Machining Centre; Control: 3D control Heidenhain iTNC 530 Technical DataFeed rate longitudinal/transverse/vertical1-90000/1-90000/1-90000 mm/minRapid traverse longitudinal/transverse/vertical90/90/90 m/minWorking area 1Longitudinal885 mmCross600 mmVertical600 mmMiscellaneousClamping SystemHSK-A 63 Colour Floor space/WeightDimensions (L x W x H)4,9 x 4,3 x 3,2 mWeight approx.12000 KgCabineFull protection cabin DMC 75 V linear in 5-axes-versionAdditional price DMC 75V linear in 5-axes-version - motion in X=885mm und Z=600mm - spindle speed up to 18.000rpm, - tool-taper HSK-A 63, - swiveling range B-axis +10° to -110°, - swiveling speed B-axis 50rpm, - max. torque 750Nm / 553ft/lbs - clampi Tool magazine 150 pocketsTool magazine 150 pockets Tower type magazine Only available for HSK Tool holders. (differently from standard) Number of tools 150 Preparation measuring probe T ...
GeneralVertical-Machining centre Stealth Design; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Longitudinal1450 mmCross700 mmVertical550 mmIntegrated motor spindle speedMASTER®Integrated motor spindle speedMASTER® At speeds > 18.000 min-1, the use of tools with dual contact system (BIG-PLUS®) is stipulated. Drive power (100% DC) 25 kWDrive power (40% DC) 35 kWTorque (100% DC) 86 NmTorque (40% DC) 130 NmSpeed range - 20000 rpmSpindle taper SK40 Tool holder DIN ISO 7388-1-A Clamping System DIN ISO 7388-3-AD TableTable surface 1760 x 750 mmMaximum load (table centre) 1500 KgSlot width 14 mmNumber of Slots 7 Distance between T-Slots 100 mmCabin roofCabin roof In sheet steel design Open and close via front door Special equipmentClampin ...
GeneralVertical-Machining centre Stealth Design; Control: CELOS X with Siemens 840D SL Operate CharacteristicsTable surface1460 x 750 mmMaximum load (table centre)1500 KgTool Magazine with40 PositionsMovement X / Y / Z1150/700/550 mmRapid feed X / Y / Z42/42/42 m/minWeight approx.12900 KgSpindle speed 20 - 12,000 rpm SK50, 288NmSpindle speed 20 - 12.000 rpm SK50 for tool taper according to DIN ISO 7388-1-A50 with power 44/32 kW // 59.0/42.9 hp with torque 288/187 Nm (40/100% DC) (differently from standard) Tool magazine 40 pocketsTool magazine 40 pockets SK50 chain magazine with pockets and double gripper, incl. manually direct loading into the tool magazine Coolant-air blast change-overCoolant - Air-blast changeover external switchable via M-Function Air blast through spindle centreAir blast through spindle centre activated by M function, maintained air with low oil rate Internal coolan ...
GeneralVertical machining center in C-frame-design New DMG MORI Design Direct Measuring system X,Y,Z; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Longitudinal650 mmCross520 mmVertical475 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools30 TableTable surface 960 x 570 mmMaximum load (table centre) 800 KgSlot width 14 mmNumber of Slots 5 Distance between T-Slots 100 mmSpindle speed 15,000 rpm, 200 NmMotor spindle speedMASTER® SK 40 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle) BIG-PLUS® tools possible Tool magazine 30 pockets SK40Tool magazine 30 pockets SK40 Chain magazine with pockets and with double gripper ...
GeneralVertical machining center in C-frame-design New DMG MORI Design Direct Measuring system X,Y,Z; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Longitudinal650 mmCross520 mmVertical475 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 TableTable surface 960 x 570 mmMaximum load (table centre) 800 KgSlot width 14 mmNumber of Slots 5 Distance between T-Slots 100 mmSpindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) Tool magazine 60 pockets HSK-A63Tool magazine 60 pockets HSK-A63 Chain magazine with pockets and with double gripper, incl. manually direct ...
GeneralVertical-Machining centre Stealth Design; Control: CELOS X with Siemens 840D SL Operate CharacteristicsTable surface1460 x 750 mmMaximum load (table centre)1500 KgTool Magazine with30 PositionsMovement X / Y / Z1150/700/550 mmRapid feed X / Y / Z42/42/42 m/minWeight approx.12900 KgSpindle speed 15,000 rpm, 200 NmMotor spindle speedMASTER® SK 40 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle) BIG-PLUS® tools possible Tool magazine 30 pockets SK40Tool magazine 30 pockets SK40 Chain magazine with pockets and with double gripper, incl. manually direct loading into the tool magazine Coolant-air blast change-overCoolant - Air-blast changeover external switchable via M-Function Air blast through spindle centreAir blast through spindle centre activated by M function, maintained air with low oil ...
GeneralVertical Machining centre; Control: DMG MORI ERGOline IV HEIDENHAIN TNC 7 CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872 Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring System Production Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar - Chip conveyor (scraper type) with tank capacity: 200 l(left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electronic handwhe Air coolant internal (through spindle centre)Air Coolant Internal (through spindle centre) switchable via M-Function maintained air ...
GeneralVertical Machining centre; Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsTable surface900 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872 Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring System Production Package 40 barProduction Package 40 bar Option includes: - Internal coolant supply 40 bar; - Tank capacity: 600l with papertype filter; - Chip conveyor (scraper type) with tank capacity: 200 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - Tool clamping buttons on the headstockTool Clamping and Unclamping Buttons placed on the Headstock Cover Air coolant internal (through spindle centre)Air C ...
GeneralVertical Machining centre; Control: Control SIEMENS ERGOline IV CharacteristicsTable surface1400 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z1100/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872 Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring System Production Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar - Chip conveyor (scraper type) with tank capacity: 220 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electronic handwh Air coolant internal (through spindle centre)Air Coolant Internal (through spindle centre) switchable via M-Function maintained air with lo ...
GeneralVertical Machining centre; Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsTable surface900 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872 Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring System Touch Probe Heidenhain TS 460Touch Probe HEIDENHAIN for workpiece measuring Option includes: - TS 460 Touch probe with optical signal transmission - measuring cycles - calibration ring - case for equipment Touch probe Heidenhain TT160Touch Probe HEIDENHAIN for tool length and diameter measurement Option includes: - TT160 probe for tool measurement - measuring cycles with tool breakage monitoring - calibration tool Note: Additionally ...
x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm B - axis: -120 / + 30 ° NC- swivellable rotary table - Ø: 700 mm control: iTNC530 Heidenhain number of spindle speeds: 10.000 1/min spindle taper: SK 40 DIN 69871 max. torque at 40% / 100% load: 28 / 19 kW tool change unit: 2 x 16 Pos. table-size: 1250 x 700 mm table load capacity: 650 kp total power requirement: 44 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 3,50 x 3,20 x 2,60 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
GeneralVertical Machining centre; Control: DMG MORI ERGOline IV HEIDENHAIN TNC 7 CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z42/42/42 m/minSpindle speed range 20 to 12.000 rpmSpindle speed range 20 to 12.000 rpm AC main drive:13/9 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872 Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring System Production Package 80 barProduction Package 80 bar Option includes: - Internal coolant supply 80 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 200 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - E Active cooling systemActive cooling system for selected mechanical components in order to increase machine thermal stability Air c ...
used
GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmSpeed max.10000 rpmDrive power (100% DC)9 kWDrive power (40% DC)13 kWTorque (100% DC)43 NmMax. torque64 NmTool Magazine with24 PositionsSpindle taperSK 40 DIN 69871 Movement X / Y / Z550/550/510 mmRapid feed X / Y / Z24/24/24 m/minDimensions (L x W x H)3,07 x 2,67 x 2,84 mWeight approx.5600 KgSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872
used
GeneralVertical-Machining centre Direct Measuring system X,Y,Z; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Longitudinal1450 mmCross700 mmVertical550 mmTool changerType of magazineWheel Type of gripperDouble gripper Number of tools30 TableTable surface 1760 x 750 mmMaximum load (table centre) 2000 KgSlot width 14 mmNumber of Slots 7 Distance between T-Slots 100 mmSpindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) Tool magazine 30 pockets HSK-A63Tool magazine 30 pockets HSK-A63 Chain magazine with pockets and with double gripper, incl. manually direct tool loading into the tool magazin ...
used
GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Longitudinal700 mmCross420 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minSpindle speed 24,000 rpmSpindle 24,000rpm with tool taper ISO 7388-2 - J30 BT30 / BBT 30 (BIG PLUS) possible for pull-studs ISO 7388-3 - JD30 (MAS 403-45°) at spindlespeed higher than 20.000 rpm BBT 30 (BIG PLUS) stipulated! AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spin Integrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Inclusive Software package Sinumerik Mdynamics 5-ax Rot ...
used
GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmSpeed max.12000 rpmDrive power (100% DC)9 kWDrive power (40% DC)13 kWTorque (100% DC)57 NmMax. torque83 NmTool Magazine with24 PositionsSpindle taperSK 40 DIN 69871 Movement X / Y / Z550/550/510 mmRapid feed X / Y / Z24/24/24 m/minDimensions (L x W x H)3,07 x 2,67 x 2,84 mWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm) SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872 Tropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperature Electronic HandwheelExternal electronic Handwheel
GeneralHorizontal machining centre - Horizontal milling head; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/70000 mm/minRapid traverse longitudinal/transverse/vertical60/60/70 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical900 mmCabineFull protection cabin Direct measuring systemDirect path measuring system NC rotary table with pallet changerType of Measuring system Direct measuring system Table surface 630 x 630 mmCentre bore 50 mmMaximum load (table centre) 900 KgSlot width 14 mmNumber of Slots 5 Distance between T-Slots 100 mmRotation speed max.4. Axis 40 rpm4. Axes (swivelling range) 360 x 0,001 degreePackage recirculation ballscrew spindlePackage recirculating ballscrew spindle X-,Z-axis:max. feed speed: 60.000 mm/min Y-axis: max. feed speed: 70.000 mm/min (basic machine without linear drive X-, Y-, Z-axis) ...
GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsTable surface900 x 560 mmMaximum load (table centre)600 KgSpeed max.12000 rpmDrive power (100% DC)9 kWDrive power (40% DC)13 kWTorque (100% DC)54 NmMax. torque82 NmTool Magazine with30 PositionsSpindle taperSK 40 DIN 69871 Movement X / Y / Z600/560/510 mmRapid feed X / Y / Z30/30/30 m/minDimensions (L x W x H)3,03 x 3,49 x 2,94 (5,8 x 5,5 x2,94) mWeight approx.5200 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring System DMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the h Safety Package for Power FailureSafety Package for Pow ...
GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsTable surface1100 x 560 mmMaximum load (table centre)800 KgSpeed max.12000 rpmDrive power (100% DC)9 kWDrive power (40% DC)13 kWTorque (100% DC)57 NmMax. torque83 NmTool Magazine with30 PositionsSpindle taperSK 40 DIN 69871 Movement X / Y / Z800/560/510 mmRapid feed X / Y / Z30/30/30 m/minDimensions (L x W x H)3,3 x 2,7 x 2,94 mWeight approx.5550 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring System inlineMASTER® spindle 12.000 rpminlineMASTER® spindle 12.000 rpm Spindle speed range 20 to 12.000 rpm Tool Taper SK40 DIN69871 with BIG PLUS inteface Tool clamping according to DIN69872 Power: 13kW (40% DC) / 9kW (100% DC) Torque: 83 Nm (40% DC) / 57 Nm (100% DC) bearings oil-air lubr SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872 N ...
GeneralHighly productive compact machining centres; Control: Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical1-60000/1-60000/1-60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross420 mmVertical380 mmMiscellaneousClamping SystemMAS 403 - 45° Floor space/WeightDimensions (L x W x H)1,65 x 2,34 x 2,5 (1,65 x 2,95 x 2,55) mWeight approx.4100 KgSpindle speed up to 24,000 r.p.m. BT30Spindle 24,000rpm with tool taper BT30 JIS B 6339 (MAS 403-45°) AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spindle and Spindle motor via heat exchanger (fan) TableTable surface 840 x 420 mmMaximum load (table centre) 300 KgSlot width 14 mmNumber of Slots 2 Clamping grid M 12, 100 x 100 mmTool clamping for BBT 30 (Big+)Tool taper BBT 30 - Big+ Pull stud MAS 403 - 45° Tool magazine 25 placesTool magazine 25 places (su ...
Stephan UMC12-F Universal machine Stainless, Bowl capacity 12L, jacketed bowl, with vacuum, variable speed, with Haake D8 circulating waterbath, top mounted bowl scraper, on mobile stainless frame, 3Ph
Manufacturer: Brandt Kantentechnik GmbH Model: Optimat KDN 350 C Machine type: single-sided edge banding machine Year of Make: 2005 Engine No.: 0-261-06-3872 Electrical connection: 400 V / 50 Hz / 3~ Control voltage: 24 V Fuse: 16 A Edge thickness: 0.4–3 mm Workpiece thickness: 8–50 mm Workpiece width: min. 70 mm Workpiece length: min. 140 mm Feed rate: 11 m/min Edge magazine: automatic for roll material and fixed lengths Cross-cut unit: 2 motors, 0.18 kW / 12,000 rpm each Milling unit: top/bottom, 2 × 0.27 kW / 12,000 rpm Shape milling unit: top/bottom Scraper unit: for PVC edging Buffing unit: 2 motors, 0.09 kW each Control: electronic PC control Accessories: existing edge rollers and edge material to the right of the machine included Suction: separate small suction unit behind the machine included Auction-ID: A ...
Widefield/Weaver el/hydr unit.4 double-acting valves, in and including stackable unit 1250x850970mm. Auction-ID: A1-50447-33
Shelf to be fixed on a Uniworks workbench, quick fixing with brackets (opening 15 to 70 mm). Condition: New, never used, in its original box. Characteristics (optimachines.com sheet): • Dimensions (L x W x H): 1200 x 300 x 450 mm – net weight 14 kg Auction-ID: A1-50698-31
Shuttle Magazine Unloader Located at the end of the SMT line, this unit consists of a combination of a single shuttle and a double lifter. It stacks printed circuit boards (PCBs) individually into an empty magazine rack using a pneumatic slider mounted on the single shuttle. LED Tower Lamp (with Buzzer) Touch Screen (Control Panel) Controlled by PLC SMEMA Interface Integrated Single Shuttle Conveyor Auction-ID: A7-50729-132
Two FANUC modular industrial CNC I/O assemblies, Made in Japan. Visible module types include AIF01A (A03B-0807-C011), AID32F2 (A03B-0807-C109), AOD32D2, AOD16D2 and AID32E2. Labels show production dates including 1995-04, 1995-05 and 1997-12 Auction-ID: A7-50717-487
Jacking unit Max 800 Ton, equipped with lifting eyes, Hatz 2130C diesel engine Auction-ID: A1-50447-32
Land Reko DE-75 Industrial Dust Extraction Unit Industrial dust extraction and filtration unit with centrifugal fan, flexible hoses, exhaust ducting and associated cyclone separator. Manufacturer: Land Reko Sp. z o.o. sp.k. Model: DE-75 Year: 2022 Serial number: 8/2022 Series: AI 2022 No. 00265 Power: 7.5 kW Rated extraction airflow: 7,350 m³/h Electrical supply: 400 V Operating temperature: 10–50 °C Configuration: Enclosed filter cabinet, top-mounted centrifugal extraction fan/motor, flexible extraction hoses, metal exhaust/silencer duct and separate cyclone separator Condition: Used Operational status: Untested Approximate dimensions: 1,300 × 1,100 × 2,600 mm Approximate weight: 400 kg Description is indicative only and based on the available photographs and information. Auction-ID: A1-50546-1
Folding wall-mounted workbench with storage pegboard: solid wood top on steel structure, 135 kg load on its two legs, cable routing, holding latch. Assembly to be provided. Condition: New, never used, in its original box. Specifications (sheet optimachines.com): • Top: 1,200 x 600 mm • Folded: 1,205 x 265 x 950 mm (W x D x H) • Unfolded: 1,205 x 825 x 1,620 mm (W x D x H) • Load capacity: 135 kg Carton size: 122 x 66 x 17 (cm) Auction-ID: A1-50698-32
Lot of 2 Heimatec precision driven/live tool holders, Made in Germany. Part Nos. 8.010.56.066 and 8.010.57.065. Serial Nos. 10010 / 11:07 and 11778 / 15:01. Both: ratio 1:1, max. speed 6,000 rpm, max. pressure 25 bar (EK+IK), max. torque 50 Nm. Supplied with storage boxes Auction-ID: A7-50717-239
YJ LINK AMB-CE is an automatic magazine unloader used in surface mount technology (SMT) to efficiently unload printed circuit boards (PCBs) from machines and stack them in magazine racks Auction-ID: A7-50729-127
Equipped with ROM/Koks Alkmaar sewer unblocking machine body with Kubota turbo diesel engine, dimensions semi-trailer tractor approx. 5200x2250x3000mm, dimensions semi-trailer approx. 7050x2350x3400mm, length tractor with semi-trailer total approx. 9500mm, mileage not readable, last known mileage dated 01-02-23 is 183453 kilometers, exhaust gas failure. Auction-ID: A1-50447-12
maximum number of results exceeded
please refine your search
2.500 € 
