un used for sale

Auction-ID: A1-50275-43

General Description TRUMPF laser cutting head assembly (Schneideinheit) for FIBER laser cutting systems. The unit is designed as a replacement cutting head for TRUMPF TruMatic/TruLaser machines equipped with TruFlow laser resonators. The assembly includes the autofocus unit, height sensing system, gas connections and electrical interfaces. Technical Details Manufacturer: TRUMPF Component: Laser cutting head (Schneideinheit) Material No.: 2014986 Serial No.: Partially visible Compatible with TRUMPF laser systems Integrated autofocus drive Height sensing unit Pneumatic and electrical connections Condition: Used Condition Complete assembly supplied in the original protective packaging. Connectors and housing appear intact with minimal cosmetic wear. Lens condition, focus cartridge, cooling circuit and operational status have not been tested. Delivery Available immediat ...

EDI system mounted on steel frame for the fully automatic production of ultrapure water. Normally, the system is operated following a UO system. The plant consists essentially of: 1.The EDI system consists of 3 parallel stacks of the type MK2E (total of 6 stacks and 2 centrifugal pumps). Both roads are mounted on a common frame. one below, the other above in the frame. 2. Piping and EDI cells 3. Fittings, flow meters and centrifugal pumps

Control touch panel Siemens MP277 10 SD - 4 x Siemens Sirius power contactor 3RT1015-1BB42 - 2 x Siemens Sirius power contactor 3RT1034-1B - 2 x ABB S201 B10 circuit breaker - Control cabinet lighting Bosch Compliant 2002/95/EC - Switch cabinet socket 18A / 250V - Control cabinet lighting RoHS Rittal automatic 250V / 26W - Service unit Festo LFR D Mini - Festo valve terminal MPAL - VI - Pilz 2 channel safety relay s2 / 24 V dc / 2 x safety contacts - ABB S201-C4 automatic circuit breaker - Siemens selectivity module SITOP PSE2000U - Siemens Sirius circuit breaker 2.2-3.2 A - Siemens Sirius Innovation motor protection switch 3RV1011-0GA10 / 0.45 - 0.63 A 3RV1 - 2 x Siemens Sirius thermal motor-protective circuit-breaker 3RV1011-1DA10 / 3.2A 690 V AC DC - 1 x Siemens Sirius circuit breaker 3RV1011-1FA10 / 3.6 - 5A - 2 x Siemens Sirius motor protection switch 3RV2021-4DA10 / 20 - 25 A 3RV1  ...

System separator type BA300 System separator - Ductile iron with backflow preventer on input and output side, 3 ball valves, drain valve Flanges according to DIN EN 1092-2 for safeguarding drinking water systems against backpressures, backflow and back suction, for residential buildings, industrial and commercial purposes, horizontal installation position with drain valve downwards, discharge volume in case of failure: 35 m3 / h, 3 ball valves for connecting a differential pressure gauge

Double softening system consisting of: - 2 GRP pressure vessels (Pentair) - 2 control heads (1 control head must be renewed) - 1 sole tank - Control unit MMP 81 (Gebrüder Heyl) - Piping with pneumatic diaphragm valves The plant is dismantled and stored in Warburg.

Sameka SAM 65, No Fab 3504, Hydraulic power unit Auction-ID: A7-50270-192

Mori Seiki DuraVertikal 5080 3Axis Machining Center (11/2006) Manufacturer: Mori Seiki Type: auto_awesome Source language: English 587 Table length 1350 mm Table width 600 mm Number of T-profiles 6 T-profile width 18 mm Max. table load 1000 kg Longitudinal travel (x-axis) 1050 mm Transverse travel (y-axis) 530 mm Travel (z-axis) 510 mm Max. tool diameter 125 mm tool weight 8 kg Spindle nose bt 40 Distance spindle nose table 150 - 660 mm By 0 rpm Until 10,000 rpm Voltage 50 Hz 3x 400 volts Spindle performance 22 kW Total power requirement 58 kVA Machine weight approx. 8,030 kg Length 2,500 mm Width 2,350 mm Height 2,700 mm Give feedback Translation results available Year of manufacture: 11/2006 Condition: used, good, in production Incl. tools in the turret Auction-ID: A7-50270-26

There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-49784-55

CONTROLS   Point-to-point control (NC) HEIDENHAIN TNC 124 WORKING RANGE -CUBIC-   X-axis travel: 600 mm   Y-axis travel: 400 mm   Z-axis travel: 400 mm TABLE   table surface (left-right): 800 mm   table surface (front-back): 425 mm   workpiece load (max): 250 kg SPINDLE / HEAD   spindle revolutions (max): 4500 /min   tool fixture: ISO SK 40   drive power: 7.5 kW ELECTRICAL SPECIFICATIONS   mains power supply: 13 kVA DIMENSIONS / WEIGHTS   space requirements -left/right-: 2720 mm   space requirements -front/back-: 1850 mm   total height: 2300 mm   total weight approx.: 2025 kg ca 2000 h

Mikron VCE 1600 Pro Type VCE 1600 PRO Year of construction 2014 Control CNC Heidenhein iTNC 530 Country of origin Switzerland Technical details x-travel 1,600 mm y-travel 900 mm z-travel 800 mm Control Heidenhein iTNC 530 Table size 1,700x850 mm Inclusion ISO ISO 40 Speed 14,000 rpm Tool Random 40 pos. Table load 2,000 kg Rapid traverse: 24 m/min Internal cooling supply 20 bar Total power requirement 18 kW Machine weight approx. 18,600 kg Pick-up date will be announced after the auction ends. Machine is loaded with a truck-mounted crane. Without screwing rods, zero clamping system and tools. A whole truck is required for transport, width 3m and interior height 3.2m Transport dimensions of the machine body (L x W x H): 4,500 x 2,900 x 3,200 mm, weight: approx. 20 tons Auction-ID: A7-50270-31

x-travel: 600 mm y-travel: 400 mm z-travel: 320 mm table-size: 900 x 420 mm control: konventionell tool adaptor: SK40 turning speed range: 35,5 - 1800 U/min quill stroke: ja mm total power requirement: 5,0 kW weight of the machine ca.: 1,45 t dimensions: 1,6 x 1,2 x 1,9 m Features: - Digital display - Coolant system - Milling head with quill The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table surface area: 720 x 410 mm spindle turning speed range: 40 - 2000 U/min : mm/min feeds Z-axis: mm/min tool taper: SK 40 total power requirement: 3,0 kW weight of the machine ca.: 1,4 t dimensions: 1,8 x 1,6 x 1,9 m Milling machine with - Toolmakers table - Heidenhain digital readout - Rapid traverse - Coolant system - Central lubrication - Machine feet - incl. drawer unit with contents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-50275-76

For Ungerer cut-to-length line Auction-ID: A1-50529-558

Universal Milling Machine Operating hours 2672 according to meter Universal milling head can be swivelled 360° Mounting SK 30 Table eyelet 900 × 300 mm with three T-slots Including machine vise Machine in very good condition immediately ready for use Auction-ID: A1-50529-6

Thread cutting unit Suhner Tapmaster, serial no.: 623302-00101/12 Auction-ID: A1-50529-228

Factory No.: D 200739 Rated voltage 230V 50 Hz Total cooling capacity 1490 W Temperature range 20 - 55° C Year of construction 12/072012 Weight 30 kg Auction-ID: A1-50529-26

Year of construction 18.11.2003 Factory No.: D 7489 Rated voltage 230V 50 Hz Temperature range 20 - 55° C Weight 13 kg. Auction-ID: A1-50529-32

Stroke per jaw: 6 mm, Clamping force: 580 N, Opening force: 640 N Auction-ID: A1-50529-600

Threading unit Suhner Tapmaster GEM 20, serial no.: 3132, as good as new, in original packaging with documents Auction-ID: A1-50529-229

Unimog 403A Agricultural design Ready to drive without TÜV as a spare parts carrier / restoration Registration date: 1970 Engine is running. large gearbox installed! Top speed: 74 km/h Front and rear PTO - Tilting cylinder - Zugmaul Rockinger - Hydraulic connections:   Rear: 2 pieces forward + return   Front: 4 pieces forward + return Operating hours / kilometer 22811 Viewing by arrangement, questions will be answered by email Auction-ID: A1-50529-2

Hydraulic unit comes from a Waldrich long planing machine Weight 400Kg LxWxH 1200 x 800 x 1200mm Condition: untested (6) Auction-ID: A7-50523-920

Composed of: ATLAS COPCO - G A15 compressor, approx. dimensions: 780 × 1300 × 1250 mm Year: 2020 Power: 3 kW Operating pressure: 10 bar ATLAS COPCO Compressor - GA15VSD, approx. size: 640 × 650 × 1450 mm Year: 2019 Power: 15 kW Operating pressure: 13 bar ATLAS COPCO FX 7 chiller, with R 134A coolant, approx. 400 × 500 × 800 mm in size TANK NOT INCLUDED. Auction-ID: A7-50524-875

Vogelsang static Unifeed hopper with a capacity of approximately 40 m³ (40,000 litres), equipped with three counter-rotating mixer augers, weighing system using load cells, motors and gearboxes, level and temperature sensors, pressure gauge, hydraulic circuit, instrumentation and electrical components. The equipment was used for the reception of solid waste, such as sludge, eggs, and other by-products. It was removed in 2019 and was working properly at the time of its removal. It is currently stored in the plant's yard and shows significant signs of deterioration due to oxidation in the metal chassis, as well as deterioration of the hydraulic circuit. Due to the downtime, motors, transmissions, planetary gearboxes, bearings, augers, electrical elements and instrumentation require a complete overhaul and in-depth maintenance before putting the equipment back into operation. The hopper ...

Stroke per jaw: 6 mm, Clamping force: 580 N, Opening force: 640 N Auction-ID: A1-50529-601

Thread cutting unit Suhner Tapmaster, serial no.: 616466-00201 Auction-ID: A1-50529-227

Built-in control unit Type: BUS6-VC-EC-0016 Art. Item No.: 232691 Auction-ID: A1-50529-37

x-travel: 760 mm y-travel: 381 mm z-travel: 450 mm quill stroke: 152 mm table-size: 1300 x 305 mm control: Heidenhain TNC 360 tool adaptor: SK40 turning speed range: 100- 4.000 U/min rapid speed: 5000 / 7000 m/min feed speeds: 2,5 bis 3000 mm/min power requirement: 2.2 kW diameter of quill: 101 mm total power requirement: 15,0 kW weight of the machine ca.: 2,4 t dimensions: 2,4 x 2,3 x 2,2 m Equipment: - Heidenhain TNC 360 - Coolant system - Hydraulic tool clamping - Milling head with quill - Machine light - Chip tray - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stephan UMC5 Universal Machine used Stepless speed Bowl capacity: 5 litres Double coat Frequency Inverter 300-3000rpm Knife insert good condition with vacuum pump and temperature control unit Pointer of the pressure gauge is crooked, does not affect the function should be thoroughly cleaned before use. It is fully functional and runs neatly and smoothly. Video about test run available

Hydraulic pump unit Part Number : Moog - D954Z8001 Arburg - A10VDC 18 DFR1/31R The spare part is in good condition Nevertheless, this is a used items, which shows slight signs of wear, or may have.

Universal Thermal Blender, Heating / Cooling incl. 1 replacement container Auction-ID: A1-50564-14

Pump output infinitely adjustable via variable speed gearbox Auction-ID: A1-50564-55

incl. double-walled process vessel, accessories, WITHOUT trolley Auction-ID: A1-50564-17

Mixer tool missing Auction-ID: A1-50564-49

Model No.: 143783 Maximum load: 300 kg Equipment / Additional information: Loading direction: left

Model No.: 143784 // S. No.: H - 6026 Maximum load: 300 kg Equipment / Additional information: Loading direction: right

Model No.: 143784 // S. No.: H - 6025 Maximum load: 300 kg Equipment / Additional information: Loading direction: right

Model No.: 143784 // S. No.: H - 6024 Maximum load: 300 kg Equipment / Additional information: Loading direction: right

Model No.: 144148 // S. No.: H - 6042 Maximum load: 300 kg Equipment / Additional information: Loading direction: front

Model No.: 144148 // S. No.: H - 6043 Maximum load: 300 kg Equipment / Additional information: Loading direction: front

Model No.: 144148 // S. No.: H - 6041 Maximum load: 300 kg Equipment / Additional information: Loading direction: front

Model No.: 144148 // S. No.: H - 6040 Maximum load: 300 kg Equipment / Additional information: Loading direction: front

Never used / sold in original carton Auction-ID: A1-50556-2003

Resolution of the displacement measuring system X/Y/Z axis 0.001 mm, position tolerance X/Y/Z axis 0.01 mm, feed speed X/Y/Z axis 20-15000 mm/min, rapid traverse X/Y/Z axis 50 m/min, max. table load 400 kg, 60 tool positions on chain magazine, 4-fold pallet storage with pallet changer incl. 5 pallets, with chip conveyor and belt filter Auction-ID: A1-50575-1

Power consumption 500 W, power output 270 W Auction-ID: A1-50575-102

Never used / sold in original carton Auction-ID: A1-50556-602

Never used / sold in original carton Auction-ID: A1-50556-508

Never used / sold in original carton Auction-ID: A1-50556-2016

Auction-ID: A1-50575-83