un used for sale

Automatic: Yes; description: Unused; welding helmet/cap/lens for tig mag mig

Automatic: Yes; description: Unused; welding helmet/cap/lens for tig mag mig

Automatic: Yes; description: Unused; welding helmet/cap/lens for tig mag mig

Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin  ...

Two-station machine for stacking canisters up to 10 ltr. Year of construction 2000. With PWDS and SFDR. Clamping force 200 kN. With aftercooling stations and needle bubbles. Also included is the conveyor belt for canisters. Good condition

Draw-off length: 225-320mm, max. packing width: 260mm, compressed air consumption: 500l/min, length: 5300mm, width: 1100mm, height: 2200mm, without tools.

Max. draw-off length: 320mm, max. packing width: 260mm, compressed air consumption: 500l/min, length: 5500mm, width: 1200mm, height: 2000mm, without tools.

Working width: 2300mm, yarn count E: 8.

Yarn count: 10, nominal width: 90inch.

Technical details on demand.

Nominal width: 2500mm/ 96inch, yarn count E: 10.

Working width: 2290mm.

Working width: 90inch, yarn count E: 10.

There are 22 machines available, 4x Singer 770 D41PE, 2x Singer 990 E3, 1x Singer 993 E3 FA320, 1x Singer 460 K73, 1x Union Spezial Klasse 75300 A, 1x Rimoldi 446930, 1x Romoldi 416498, 1x Rimoldi S60, 1x Rimoldi 7142, 1x Rimoldi 7143, 1x Lewis 150-2, 2x Kettma Klasse 100KA, 1x Kettma Klasse 100 KAS and four additional machines.

There are 4 identical UNOX ovens available. Max. Temperature: 260°C, capacity: 6 trays, tray dimensions X/Y: 600mm/400mm, distance between trays: 80mm. Dimensions X/Y/Z: approx. 860mm/900mm/900mm, weight: approx. 90kg. Defects: The front glass of one oven is broken, but it works perfectly.

With accessories and documentation.

Nominal load: 250kVA, weight: 950kg.

With cryogenic cooling system, was maintained regularly, including spare parts and extensive documentation.

With documentation, was maintained regularly, an inspection is possible.

There are 3 cabinets full of frequency inverters available. More detailed list available in the pictures. All frequency inverters work perfectly. Documentation available. On-site inspection is possible.

As good as new, reach: 850mm, payload: 5kg, repeat accuracy: 0.03mm, weight: 20.6kg. With teach panel, control box, manuals. On-site inspection is possible.

Unitech Tray washer 2012, Stainless tray washer, belt dimensions 2000mm x 530mm, recirculation tank with filter, hot or cold wash, 3Ph

Uniz TC-280 manual band saw. Cutting capacity: 280mm. Power: 1,5cv.

Key data: 120

Extruder 1 spindle : 120 mm Ø 35 L/D, make: Union, motor: 110 Kw (150 hp). 4.2 m. long. With degasser, filter changer: 220 mm, overhead cutting to the water with centrifuge and screen. Electrical panel with variable speed drive.

Working width 2000 mm, depth stop approx. 500 mm, YOC 84 Control

Key data: 120

Extruder 1 spindle: 120 mm Ø, 35L/D, brand: Union, with degasser, hydraulic filter changer: 150. Year: 1987.

Untha RS40 Shredder Year: 12/2019 Technical data RS40 Rated capacity 30/37/44 kW Cutter clearance 750/1000 x 700mm Number of shafts 4 pcs Speed of the main shafts 24 rpm Speed of the secondary shafts 32 rpm Ø perforated screen 15-40 mm Weight 3300/3600kg

Universal Pack Gamma-M5D Sachet Machine – 5 lane This machine has come direct from a closed sauce manufacturing company, was producing small sachets of barbecue sauce. 2015 machine with fillers for hot fill and cold fill.

General: Power 1.5 kW 16 A Other equipment and accessories included: Coolant device 2 saw blades

technical details generator: - Type: Synchronous - Rated voltage: 230 V - Apparent power at LTP: 4.18 kVA - Active power at LTP (emergency power): 3.8 kW - Apparent power at COP: 3.63 kVA - Active power at COP (continuous power): 3.3 kW - Protection class generator: IP 23 - Version sockets: 2 x 230 V, Schuko - Protection class sockets: IP 44 technical details drive: - Drive: SC170B - Power factor: 0.9 cosφ - Starter: Hand start - Engine oil quantity: 0.25 (min) - 0.6 (max) liters - Fuel: Gasoline - Tank volume: 15 liters - Runtime at 50% load: 14.0 hours - Runtime at 100% load: 9.5 hours - Sound pressure level Lp: 75 dB(A) - Sound power level Lw: 96 dB(A) Dimensions and weight: Length: approx. 595 mm Width/depth: approx. 460 mm Height: approx. 527 mm Weight: approx. 55 kg Scope of delivery: - 1 x wheelset with folding handle (Changes and errors regard ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer, as it is where it is Fruit juice concentrate plant Was running with Juices from Apple, sour Cherry Manufacturer: Unipektin Still installed, ready to work, in maintained condition Year of manufacture: 1990 Type: Falling film Number of evaporation effects --> 5 Water Waterevaporation --> 9 to/h Inclusive aroma column Pre-evaporator Prior sales reserved

We offer, in its current state, from the location Fruit juice concentrate plant Was operated for juices from apple, sour cherry Manufacturer: Unipektin Still installed, ready for operation, in well-maintained, maintained condition Year of Manufacture: 1990 Type: Falling Film Evaporator Number of levels: 5 Water evaporation per hour: 9 Including aroma column With pre-evaporator Subject to prior sale

Technical details drive: - Drive motor: Yanmar L100 Electric - Starter: E-Start - Fuel type: Diesel - Fuel tank capacity: 24 litres - Runtime at 100% load: 12.37 h - Fuel consumption at 75% load: 1.45 l/h - Oil tank capacity: 1.6 litres - Sound power level (Lw): >97 dB(A) - Power factor: 0.9 Cos ɸ Technical details Power generator: - Type: Synchronous - Nominal voltage: 230 - Apparent power at LTP: 5.9 kVA - Active power at LTP: 5.3 kW - Apparent power at COP: 4.8 kVA - Active power at COP: 4.4 kW - Generator protection class: IP 23 - Sockets: 1 x Schuko 230V 16A IP54, 1 x 2P+T CEE 230V 16A IP44, 1 x 2P+T CEE 230V 32A IP44 - Protection class of sockets: IP 44 / IP 54 - Insulation monitoring - Thermal circuit breaker - Oil monitoring - Digital display for voltmeter and hour meter (LTP = time-limited generator power (max. power of the generator within 500 h/yea ...

unused machine. Was set up at the customer's site at the end of 2021, some samples were run and then the machine was never used again. Extruder 70/24D, single head, nozzle up to 120 mm. B&R control. All movements proportionally controlled. With waste and bottle conveyor. Optional moulds for 1-tr and 0.5 litre round bottles available

material width: 1650 mm material thickness: 2,00 mm no. of straightening rolls: 23 sheet thickness - min.: 0,50 mm diam. of the rolls ca.: 53,60 mm straight. rolls-needle bearings: ja / yes between stands ca.: 1750 mm barrel length ca.: 1820 mm straight. speed ca.: m/ min total power requirement: 58 kW weight of the machine ca.: 19,60 t dimensions of the machine ca.: 6,00 x 3,00 x 2,90 m Number - supports 14 (7 x above/7 x below) with support rollers Number - support rollers 174 ( 84 x above / 91 x below) Support roller dia. approx. 112mm Drive power - main drive 55 kW Motorized height adjustment Electromotive tipping device Crowning (support adjustment (below) mechanical/manual) and individually deliverable 1 set of straightening rollers (replacement rollers) diam. 53.68mm Central grease lubrication of the straightening rollers bearing rails Circulating oil lubrication of gears and card ...

Used foil bottler with a capacity of 0.25 - 1 L Unipak, model ASG-3, PLC control, operational, production in the 90s. Technical data: performance -for a bag 1 / 4L 40 / min, 600 L / h -for a bag 1 / 2L 35 / min, 1060 L / h -for a 1L bag 30 / min, 1800 L / h bag sizes -width standard 140 mm, special 110-180 mm -length 60-300 mm electropneumatic control -pressure 0.6-0.8 MPa - demand 20 m3 / h 220V 50 Hz power supply - 1500W power dimensions 880x900x1950 mm -weight 360 kg 2 pieces available.

ORDER NO. 6955 TECHNICAL SPECIFICATIONS - loading hopper inlet L x W 1070x710mm - outlet for shredded wood fi 200mm - rotor working width 700mm - main engine 18,5kW - pump motor 1,5kW - number of knives 21pcs - knife size 35x35mm - sieve 50mm - pressure drawer - electric autorewers - dimensions length / width / height 1700x1300x1640mm - weight 1780kg ADVANTAGES – German production – autorewers – pressure drawer – very good condition – used chipper Net price: 67900 PLN Net price: 15089 EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

Boring mill turntable, used Boring table, used Typ/ type: TI 2 Manufacturer/ make : UNION Year of construction: 1984 Table size: 1800 x 2000 mm ; > 360° Fahrweg/ way : 1250 mm Feed speed: 0.5 to 1600 mm/min Tischbelastung/ table load: 15000 kp Gesamtlänge/ total length: 3500 mm Gesamtbreite/ total width: 2250 mm Weight/ weight: 7 t Feed motor: 6 kW

Spindle diameter: 110 mm Cross X: 2500 mm Vertical Y: 2000 mm Table length: 1600 mm Table width: 1250 mm Positions ATC: 60   Number of pallets: 0   CNC Brand: Heidenhain Spindle SK-50 with 2000 Nm torq 60 Position Chian ATC ( Optional toling package) Backlash free ball screws in all linear axes with absolute valvue High pressure coolant and paper filtration 40 bar Fully enclosre housing guarding area Chip conveyor X - Travel:              2500mm Y - Travel:              2000mm Z - Travel:              1500mm W - Travel:              550mm Table Length:            1600mm Table Width:             1250mm Table load:              6000 S ...

Adjustable jaw from 90 to 45 degrees, High: 1210 mm, Long: 1280 mm, Width: 710 mm, Weight: 410 Kg, Voltage: 220/380 V, Total power: 2.5 Cv, Ø max. cut: 260 mm, Blade length: 450 x 38 mm (18 ), Specification: Hydraulics

TIG hose package, welding torch, hand welding torch, TIG torch -with torch body -Length: 4 m -Tuchel connector: 3-pin -Water: chilled -Number: 2x hose packages available -Price: per piece -Weight: 2.4 kg

Flame cutting pliers, electrode pliers, hose package -Length: 3 m -Price: per piece -Number: 6x available -Weight: 3.5 kg/piece

Cooling capacit: 276 kW (10/15 - 35°C) Year of manufacture: 2013 Options: Hydromodul, Free cooling Hydraulic module: 2 pcs. pump, 500 liters expansion tank. Refrigerant circuit: 2 pcs. Number of fans: 4 pcs. Type of refrigerant: R407С Compressors: 4 pcs. Danfoss (scroll) Heat exchanger: Shell-and-tube Dimensions: 3,6 x 2,26 x 2,3 m. Weight: 3 147 kg. Working hours: 28300 h. Condition: Excellent Product quantity: 1 pcs.

Gear motor with brake UNELEC Type: AT 90 L63 ( AT90L63 ) 1.1 kW 28.2 rpm i 30 220 / 380 V New ! IP 54

Working width: 1350 mm Number of sanding units: 2 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370x2150 mm Weight: 1900 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Squirrel wrapping machine, Fabr. Universum, Type 30/3

Pretzel strand machine , Fabr. Kasper Universe

MACHINE IS ONLY TESTED, DEMO AND IT IS AS BRAND NEW CONDITION. OLEASE LET US KNOW ABOUT YOUR PRODUCT AND WE WILL TELL YOU IF THIS MACHINE WILL FITS FOR YOURS PRODUCTS. MACHINE IS AWAILIBLE IMEDIATELY. WE ORGANIZE DISMANTLING LOADING TRANSPORT WE CAN ORGANIZE WITH FULL RISK INSURANCE FOR THE CUSTOMER.

Specifications: X-axis 2,750 mm Y-axis 2,500 mm Z-axis 2,320 mm W-axis 700 mm Spindle power 50 kW Spindle diameter 130 mm Spindle speed 1.6 – 1,600 rpm. Tool holder SK 50 Control: CNC HEIDENHAIN TNC426 Table dimensions 2,000 x 1,800 mm max. table load 8 tons B-axis 360 A° Weight approx. 37,000 kg