un used for sale

A universal external and internal cylindrical grinding machine Tachella, refurbished in 2021, is available. Center distance: 600mm, center height: 120mm, max. grinding diameter: 240mm, max. grinding length: 600mm, X/Z travel: 600mm/250mm, max. workpiece weight: 100kg/40kg. Machine dimensions X/Y/Z: approx. 2700mm/1900mm/1700mm, weight: approx. 2500kg. Documentation available. An on-site inspection is possible.

2 KSB centrifugal pumps with frequency control from the ice water circuit of a refrigeration system. Capacity: 2 x 15 m³/h at 2 bar, Additional title: centrifugal pumps, Delivery rate: 15 m³/h, Delivery pressure: 2 bar delivery head 20 m, Running direction: clockwise

A mobile Höcker dust extraction and filtration unit is available. Inlet diameter: 140mm/160mm, max. airflow: 1950m³/h, max. vacuum: 2600Pa, filter category: H3, machine dimensions X/Y/Z: approx. 1450mm/1050mm/2000mm, weight: approx. 350kg. Documentation available. An on-site inspection is possible.

Additional title: Control cabinet with touch panel, Voltage: 110-240 V AC, Frequency: 50-60 Hz, Length: 500 mm, Width: 580 mm, Height: 210 mm, Weight: 35 kg, Operation / Control: touchpanel

internal grinding spindles: . centre height: 240 mm grinding length: 2500 mm grinding wheel diameter: 750 mm Dimensions (L/W/H): 6000 x 3000 x 2500 mm weight of the machine ca.: 9 t Internal grinding attachment with grinding spindle Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offered is a special drilling and thread-cutting machine Frielingsdorf, equipped with four Ayen drilling units. Machining directions: 3×side, 1×top, setup: rotary indexing table, speed of side drilling units: 960rpm, speed of drilling unit from above: 1400rpm, motor power per drilling unit: approx. 0.73kW, control: conventional. Machine dimensions X/Y/Z: approx. 2600mm, 1500mm, 2600mm, footprint without side lines/containers: approx. 3.5m², weight: approx. 1500kg. Inspection possible by arrangement.

Newtec H3013MD 13-Lane Linear Weigher with Elevating Belt – Double PCS (2013), The Newtec H3013MD is a high-capacity 13-lane linear weigher featuring an integrated elevating belt and a Triple PCS (Portion Collection System). This dual collection system enables significantly higher throughput by collecting and discharging two weighed portions simultaneously, making it an excellent solution for high-speed fresh produce packing lines., Designed specifically for products such as potatoes, onions, carrots, tomatoes, citrus fruits and other fresh produce, the H3013MD combines accurate weighing with gentle product handling and exceptional reliability. The hygienic stainless steel construction and proven Newtec technology make it a popular choice for demanding packing operations., Technical Specifications, - Manufacturer: Newtec, - Model: H3013MD, - Type: 13-lane linear weigher with elevating  ...

Additional title: 4 container CIP, Capacity per tank: 3000 l , Number of tank: 4 pieces , Width: 1,3 m, Height: 3,4 m, Weight: 500 kg, Position: vertical, Features: Pressureless tanks, 3 tanks, every with 30 hl, d = 1,2 m, h = 2,8 m,1 tank with 25 hl for fresh water, d = 1,2 m, h = 2,2 m, feeding in of water of the main

This 4-axis SCHÜCO Profilbearbeitungscenter 299 650 was manufactured in 2004. It features a powerful 21 kW motor and operates at a voltage of 380 V. With a maximum operating pressure of 0.8 MPa and a weight of 5,000 kg, this machine is designed for robust performance. If you are looking to get high-quality machining capabilities, consider the SCHÜCO Profilbearbeitungscenter 299 650 universal machining centre we have for sale. Contact us for further details.

This 5-axis SCHÜCO AS 100 was manufactured in 2022. It features a machine bed length of 9,000 mm and allows for 6-sided processing with two 5-axis towers. The machine includes 5 movable clamping blocks with independent drives and a saw blade diameter of 450 mm. If you are looking to get high-quality profile machining capabilities, consider the SCHÜCO AS 100 universal machining centre we have for sale. Contact us for further details.

Technical Specifications & Performance Data The Nortan New Sleever Machine Unwinder 2022 is a single-station supply module designed to feed shrink-sleeve material reliably to a sleeve applicator within a labeling section of a used bottling line or new beverage production setup. Engineered for high-throughput industrial packaging, it ensures steady web delivery to maintain consistent labeling quality across diverse formats. Manufacturer: Nortan Model: Sleeve Year of manufacture: 2022 Category: Labeling Machine – sleeve material unwinder Number of stations: 1 Nominal speed: up to 20,000 bundles/hour Container types supported: PET, glass, aluminum Product applications: water, juice, beer, wine, and related beverages Condition: In storage Included: Safety features, operating manuals Label feed: Continuous sleeve web unwinding for shrink-sleeve application Advanced Automation & Control Syst ...

Technical Specifications & Performance Data The Zalkin MS 24/858 is a high-speed rotary cap unscrewer engineered for demanding beverage production and industrial packaging environments. This second hand 2013 unit delivers reliable decapping performance on modern used bottling line layouts while preserving product integrity and line efficiency. Manufacturer: Zalkin Model: MS 24/858 Year of manufacture: 2013 Category: Decapping Machine (Cap Unscrewer) Operating speed: up to 25,000 bottles/hour (format and product dependent) No. of heads: 24 rotary unscrewing heads Container types: PET and glass bottles; can be adapted for aluminum bottles with threaded necks depending on tooling Closure compatibility: plastic screw caps (HDPE/PP) and selected aluminum screw closures, subject to configuration Format range: accommodates a wide range of beverage bottle formats with the appropriate change part ...

Used Posimat bottle unscrambler - year 2021Technical Specifications & Performance DataThis Bottle Unscrambler POSIFLEX-A-20 is a proven solution for high-efficiency bottle handling at the start of a used bottling line. Manufactured by Posimat, it is engineered to orient and feed empty bottles reliably into downstream industrial packaging equipment, supporting beverage production environments that demand consistent uptime and gentle container treatment.Manufacturer: PosimatModel/Type: POSIFLEX-A-20Manufacturing year: 2021Production speed: up to 100 bpm (bottles per minute)Application: Automatic bottle unscrambling and infeed to conveyorsCompliance: CE marked; designed according to 2006/42/CE (Machinery), 2014/30/CE (EMC), 2014/35/CE (Low Voltage)Container handling: Optimized for bottle feeding in beverage production linesUse case: Ideal for second hand installations and upgrades of existi ...

UsedPaal RS40 residual roll saw / splitter and roll unwinders. Year of manufacture: 1998 Max. roll diameter 400 mm Max. roll length 2.500 mm Saw blade diameter 600 mm Drive power 19 kW Max. enclosure width approx. 1000 mm Max. machine length approx. 9000 mm Machine weight about 2,400 kg max. transport chain speed: 2.45 to 11.75 m/min. Throughput capacity depending on roll length and saw cut depth: 87.5 to 175 m/h

This 5-axis DMG MORI HSC 70 linear was manufactured in 2014. It features impressive travel dimensions of 650 mm in X, 600 mm in Y, and 380 mm in Z. The machine is equipped with a spindle speed of up to 18,000 rpm and a tool magazine with 30 positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI HSC 70 linear universal machining centre we have for sale. Contact us for further details.

grinding diameter: 450 mm grinding length: 1000 mm centre height: 225 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Fotos von bereits gelieferten Maschinen. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -FANUC Steuerung mit BLUE-SOLUTION -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Fotos von bereits gelieferter Maschine mit anderen Optionen. Schleikopfvariante UR/RS: -Schleifscheibenanordnung für Aussen -und für Schrägeinstichschleifen hintereinander! -Dadurch jeweils 400mm Scheibendurchmesser! -Dadurch wesentlich geringere Kollisionsgefahr -Einfacheres programmieren -Sch ...

Ref.nr 00925 A and Ref.Nr 00926 B Please note in the video: the gray left Esta filter system is Ref.nr. 00925 A (sold separately) Ref.nr. 00925 B Designation of the system Filter + Extraction System Manufacturer Esta Extraction Technology Model EU 562-2 Year of construction ? KW 15 kW Volt 400/690 A 28 Hz 50 IP 55 B3 2930min Housing position LG 0 Remark: Outside under power Ref.nr. 00925 A Name of the filter system For sale is an ESTA Dustex F84 filter system for the extraction of grinding, polishing and processing dust. The system is suitable for industrial workplaces and ensures a clean working environment. Manufacturer: Esta Model Dustex F 84 Year of construction ? Research found: The ESTA DUSTMAC F-84 (often referred to synonymously with the Dustex F series) is a high-performance, IFA-certified central extraction system. It is special ...

Two Gallus rotary screen printing units for the Arsoma EM 280 with peripheral equipment are available. Printing process: rotary screen printing, roller width, max. screen printing width: 270mm, side register adjustment range: +/-5mm, max. speed: 150m/min. Including various screen rings, welding unit, bonding fixture, mounting plate and trolley. Documentation available. An on-site inspection is possible.

This 5-axis DMG DECKEL MAHO DMU 100T was manufactured in 2003. It features impressive travels of 1,080 mm in the X-axis, 635 mm in the Y-axis, and 710 mm in the Z-axis. The machine includes a fully refurbished Nikken CNC rotary tilting table and an Erowa Robot Easy automation system with 12 pallet stations. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 100T universal machining centre we have for sale. Contact us for further details.

Key data: 735 mm, 650 mm, 630 mm

Inv. Num. : 9327 Type: DMC 65 V Producer: DMG Created: 2001 Parameters: Control system: HEIDENHAIN TNC 426/430 M Table diameter: 630 mm Maximum table load (uniform): 600 kg X-axis travel: 735 mm Y-axis travel: 650 mm Z-axis travel: 630 mm

Marel MS2730 Filleting Machine with Back Bone Trim, High-performance automatic salmon filleting machine, Available from August / September., This Marel MS2730 Filleting Machine is equipped with an automatic Back Bone Trim system, delivering excellent fillet yield and consistent product quality. The machine has been professionally maintained by Marel on an annual basis and is currently in good working condition. (Complete overhaul in 2018)., Designed for medium to high-capacity fish processing operations, the MS2730 automatically adjusts to different fish sizes, ensuring maximum yield while reducing manual labor., Key Features, - Automatic salmon filleting machine, - Equipped with Back Bone Trim, - High fillet yield and excellent cutting accuracy, - Automatic adjustment to varying fish sizes, - User-friendly touchscreen control, - Hygienic stainless-steel construction, - Easy access for c ...

x-travel: 560 mm y-travel: 320 mm z-travel: 400 mm turning speeds: 25 - 2000 U/min turning speeds: 18 Stufen spindle taper ISO: 40 SK quill stroke: 100 mm table:: 320x1000 / 450x950 mm table load: 125 kg feed range: 5 - 600 mm/min feed: 18 Stufen rapid traverse: 1200 mm/min total power requirement: 5,4 kW weight of the machine ca.: 1780 kg. range L-W-H: 1800 x 1500 x 1780 mm From a training workshop - good condition () Commissioned in April 2017 Features: - 3-axis digital display - Ball screws on the X and Y axes - Rapid traverse in all 3 directions - Electromagnetic brake for spindle stopping - Coolant system - Chip tray - Vertical milling head with quill adjustment Milling head rotation 90° ISO 40 tool holder - Fixed box table 950 x 450 mm Number/size of T-slots: 7 / 14.0 mm T-slot spacing: 63 mm Minimum distance between base table and spindle axis: 163 mm - Machine light - S ...

Used KOSME blower unit 6 cavity - 12000 BPHTechnical Specifications & Performance DataThis rotary blow molding machine by KOSME delivers reliable PET bottle production with a proven 6-cavity configuration. Optimized for beverage production and industrial packaging, it achieves a maximum output of 12,000 bottles per hour on the 0.5L format. An energy-saving ceramic oven and an additional air recovery system support efficient operation, reducing both power and compressed air consumption. The machine comes customized for 28 mm neck finishes, aligning with common beverage closures used in water and CSD packaging.Manufacturer: KOSMEYear: 2012Architecture: RotaryNo. of cavities: 6Maximum output: 12,000 bottles/hour (0.5L)Container type: PET bottlesNeck finish: 28 mm customizationHeating system: Energy-saving ceramic ovenAir system: Additional air recoveryElectrical: 400 V, 50 Hz, 27 kWOperatin ...

Universal machine Manufacturer: Stephan Type: KG 160 Technical specifications : kW 1.1/1.8 RPM 152/296 HZ 50 Suitable for cutting, grating, pureeing, grating depending on the tool used

throat: - mm tool adaptor: siehe Fotos power requirement: 0 kW internal diameter: ca. 240 mm max. pitch circle: ca. 200 mm total power requirement: 0 kW Shipping weight: 230 kg Packing: ca. 800 x 500 x 400 mm Multi-spindle drill head Drilling bell incl. a total of 34 drilling plates The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: - mm power requirement: 1 kW total power requirement: 1 kW weight of the machine ca.: 0,16 t dimensions of the machine ca.: 1,20,81,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle taper ISO: 40 throat: ca. mm Shipping weight: 45 kg Packing: 400300300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 - 800 mm y-travel: 200 - 400 mm z-travel: 200 - 400 mm total power requirement: 3 kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m Short-term free from current operational resolution Untested, wear and tear due to age and use Price EXW / ex foundation Machine package 3 x Bridgeport 1 x Bridgeport design 1 x Kunzmann 2 x Fritz Werner 1 x DETOMBAY 2 x Reckermann The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mm y-travel: 200 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m SK40, xyz 400mm/200mm/400mm, table size 750mm x 300mm spindle speed 40-1600rpm, infeed 8-320mm/min weight ca. 2000kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mm turning diameter over slide rest: 190 mm centre distance: 650 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m turning length: mm 3-jaw chuck Multifix tool holder device tail stock coolant device Technische Daten / technical details: Spitzenweite / center to center 650 mm Dreh-Ø über Bett / turning diameter over bed 330 mm Dreh-Ø über Schlitten / turning diameter over sledge 190 mm Spindelbohrung / spindle hole 36 mm Drehzahlbereich / spindle speed 30-2500 UpM /rpm Antriebsleistung / drive capacity 2,2 kW Gewicht der Maschine ca. / weight ca. 600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 800 mm centre height: 150 mm Control: FANUC grinding wheel size: max. 400 x 63 x 127 mm workpiece weight: 120 kg engine output: 7,5 kW turning speed range - grinding wheel: 45 m/s m/s swivelling range: +45/-15° Grad work piece spindle speed: 22-313 / 51-750 U/min workpiece spindle swivable +/-: 90 ° tailstock quill taper MT: MK 4 x-travel: 355 mm z-travel: 4,0 mm Working speed: 0 + 7,5 m/min weight of the machine ca.: 4,0 t dimensions of the machine ca.: BTH 3,7 x 2,2 x 1,9 m -incl. Coolant system -incl. Lynette -incl. Sharpening diamond -incl. open Lynette -incl. 3 pieces of grinding discs -incl. 3 pieces of flanges -incl. Internal grinding spindle attachments The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

carrying capacity: 500 kg number of suction cups: 6 suction cup dia.: 215 mm Vacuum lifter VH 6-500 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. is routed to the lifting device nex ...

x-travel: 1.000 mm y-travel: 340 mm z-travel: 450 mm table:: 1.300 x 400 mm spindle taper ISO: 40 SK turning speeds: 32 - 1.400 U/min spindle stroke: 80 mm total power requirement: 7,5 kW Features: - Universal console milling machine with HEIDENHAIN digital display - Mechanical tool clamping - Cooling system - Various SK 40 tool holders - Machine documentation in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

carrying capacity: 1000 kg number of suction cups: 8 suction cup dia.: 280 mm Vacuum lifter VH 8-1000 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 4x galvanized crossbeams with a length of 1,000 mm - 8x Springy, articulated and adjustable suction cup holders - 8x suction cups Ø 280 mm, in case of wear the seal can be separated whose metal supports can be changed inexpensively and without tools - 8x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. is routed to the lifting device ne ...

x-travel: 400 mm y-travel: 350 mm z-travel: 400 mm tool taper: SK 40 spindle turning speed range: 1,0 - 4.000 U/min feeds: 0 - 2000 mm/min quill stroke: 60,0 mm table-size: 650 x 350 mm T-slots: 14 H7 Control: TNC 124 engine output: 5,5 kW weight: 1800 kg dimensions of the machine ca.: 2000 x 1000 x 2100 mm New price ~ 55.000 euros () Furnishing : - Universal tool milling machine - HEIDENHAIN pattern control TNC 124 - The control panel can be swiveled to the right of the machine - hydraulic tool changer (DIN 69872) - Vertical milling head - SK 40 - X-axis feed .. 0 - 2000 mm / min - Y-axis feed .. 0 - 2000 mm / min - Feed Z-axis .. 0 - 2000 mm / min - Central lubrication, electrical - coolant device - Chip tray - Operating instructions for machine + control Special accessories included: - hydraulic machine vice - many tool holders - HEIDENHAIN HR 410 electronic handwheel The data for ...

x-travel: 800 mm y-travel: 700 mm z-travel: 600 mm turning speeds: 12000 1 U/min : control: Heidenhain total power requirement: 59 kW weight of the machine ca.: 10,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

vacuum pump: Fezer RA 0100t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 360 mm z-travel: 420 mm control: Heidenhain 355 tool taper: SK 40 weight of the machine ca.: 1,7 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Angle welding system and shrink tunnel Manufacturer AVC Sealing Solutions Angle Welder Type HS-500 Welded frame: 500 x 600 mm Machine Dimensions: 1780 x 1020 x 1120 Shrink tunnel type 1000 Tunnel opening: 440 x 300 mm Shrink length: 1000 mm Machine Dimensions: 1800 x 1100 x 1600 Heating capacity max. 11 kW Very good condition, the equipment has been little used.

centre height: 100 mm weight of the machine ca.: 30 kg dimensions: 300 x 250 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

coolant capacity: 500 l Filter capacity: 800x900 mm dimensions of the machine ca.: 2x1,4x1,5 m total power requirement: kW weight of the machine ca.: 1 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1700 mm y-travel: 1200 mm z-travel: 1600 mm table surface area: 1700x1200 mm turning speeds: 35-1800 U/min feed: 20-1550 m/min throat: 1200 mm spindle stroke: 300 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mm y-travel: 920 mm z-travel: 900 mm table surface area: 1800x700 mm T-slot - distance: 120 mm Table load: 3000 kg spindle taper ISO: 50 power capacity: 22/30 kW spindle turning speed range: 60-3000 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Magnetic clamping plate can be purchased optionally The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your  ...

x-travel: 500 mm y-travel: 300 mm z-travel: 380 mm spindle stroke: 100 mm turning speeds: 40-2000 U/min Table area: 380x800 mm Feed: 10-500 mm/min Feed: 10-500 mm/min Rapid movement: 1500 mm/min spindle taper: ISO: 40 digital readout: Elesta total power requirement: 3 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1,2x1,2x1,7 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your  ...

x-travel: 560 mm y-travel: 500 mm z-travel: 450 mm table surface area: 900x520 mm turning speeds: 4000 U/min tool taper: SK 40 Control: Heidenhain type: TNC 355 : elec. coolant: total power requirement: kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the sof ...

x-travel: 700 mm y-travel: 450 mm z-travel: 450 mm Control: Heidenhain type: TNC 355 table surface area: 800x500 mm universal head: : spindle taper ISO: 40 total power requirement: kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of Log ...

x-travel: 550 mm y-travel: 350 mm z-travel: 400 mm table surface area: 1130x330 mm number of T-slots: 5 T-slot - width: 14 mmH8 T - slots distance: 63 mm number of tools: SK 40 quill stroke: 80 mm milling-head swivable +/-: 180° total power requirement: kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The  ...

x-travel: 800 y-travel: 650 mm z-travel: 542 mm Control: Heidenhain type: TNC 426 table surface area: 800x600 mm c-axis: 1/1000 ° table - tiltable: 45 Grad swing dia.: 1200 mm spindle taper ISO: 40 turning speeds: 0-5000 U/min Tool changer: 30 Pos : chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m SHW License Spindle head rotatable for horizontal machining. Tool table tilts forward up to 45° (not controlled) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contac ...

x-travel: 800 y-travel: 650 mm z-travel: 542 mm Control: Heidenhain type: TNC 426 table surface area: 800x600 mm c-axis: 1/1000 ° table - tiltable: 45 Grad swing dia.: 1200 mm spindle taper ISO: 40 turning speeds: 0-5000 U/min Tool changer: 30 Pos : chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m SHW License Spindle head rotatable for horizontal machining. Tool table tilts forward up to 45° (not controlled) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contac ...

x-travel: 2000 mm y-travel: 1500 mm z-travel: 1460 mm Control: Heidemhain type: TNC 426 CB mm Rotary table: 1350x1550 mm turning speeds: 10-3000 U/min spindle taper ISO: 50 Table load: 6000 kg T-slot - width: 28h7 mm T-slot - distance: 150 mm number of T-slots: 150 Feed: 10-3000 mm/min total power requirement: kW weight of the machine ca.: 24 t dimensions of the machine ca.: m B-axis 0.1-1.5 rpm Feed rate 3 rpm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours a ...