137,845 used machines on RESALE, but how to find them? Machine Search
This 5-axis DOOSAN VC 630/5Ax was manufactured in 2013. It features an impressive X-axis travel of 650 mm, Y-axis travel of 765 mm, and Z-axis travel of 520 mm. The machine includes a maximum workpiece weight capacity of 500 kg and a spindle speed of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 630/5Ax universal machining centre we have for sale. Contact us for further details.
Dear Ladies and Gentlemen, the machine has not run much, it has been treated with care and is fully functional.
Hello Ms. Bader, for sale is a used, fully functional milling machine of the brand - Schaublin 53 incl. accessories.
Stock # U2439-2 Used Erweka (DE) multi-task lab size set with drive AR400. Unit is driven by el motor 0.5 kW, 3000 rpm, 220 V, 50 Hz. Output rotation adjustable in range from 0-400 rpm. As a set there are included: - planetary mixer type PRS with agitators - frame, wall scrapper, hack type, whisk type. Including electrically heated mixing pan type DER. El heater power 500 W. Total volume of mixing pan about 6,5 l. - single piston homogeniser type HO with stainless steel electrically heated product hopper with volume about 2.8 l. Additional stainless steel hopper with volume about 3 l, and bypass stainless steel pipe. Output up to 30 kg/h. - Stainless steel vertical jacketed mixing tank type SG3W with belt driven 3 level paddle agitator. Bottom discharge. Total volume about 5 l. All devices last time had been working in cosmetic industry.
Stock# U2439-3 Used Erweka (DE) multi task lab size set with drive AMD/EX. Unit is driven by el motor 0.37 kW, 920 rpm, 380 V, 50 hz. Ex design and is equipped with vari speed gearbox. Output rotation adjustable in range from 46-410 rpm. As a set there are included: - stainless steel three roll mill type SMS - rolls with width 107 mm x diameter 50 mm. Output in range 2-20 kg/h. - planetary mixer type PRS with agitators - frame, wall scrapper, hack type, whisk type. Total volume of mixing pan about 6l. - single piston homogeniser type HO with stainless steel product hopper with volume about 3 l. Output up to 30 kg/h. - universal drive arm type UG with device for mounting ceramic ball mill type KM 0, mill volume 0.5 l, includes ceramic milling balls. All devices last time had been working in cosmetic industry.
Deckel Maho Universal Milling Machine DMU 125 P 1,250 x 880 x 800 mm Motor spindle 18,000 1/min. Tool holder SK 40 Automatic Swivel Milling Head Horizontal tool changer setup Double gripper 30 magazine slots Coolant tank 600 litres Internal cooling IKZ Form AD Conveyor Rotating viewing panel 3D path control TNC 430 NC rotary table diameter 1,250 x 1,000 mm Universal milling head with controlled B-axis Electronic handwheel Probe Infrared Heidenhain TS 631
Consists of a cooking cabinet and smoking unit, including documentation. On-site inspection is possible.
Stitching and folding unit MKW SFT 350; Condition as is; suitable for connection to MKW gathering machines or as a stand-alone; 2 Hohner 52/8 stitching heads; folding device; Front cut; 2.Knife; open format 10x14cm to 50x70cm, folded format 10x7cm to 50x35cm. Stitch-fold unit MKW SFT 350; condition as is; used for MKW machines or offline; two stitching heads 52/8; folding unit; front cut; secound knife; open size 10x14cm to 50x70cm, folded size 10x7cm to 50x35cm.
This 3-axis Matec HV30 was manufactured in 2004. It features an X-axis travel of 2,000 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm. The machine is equipped with a Heidenhain TNC 426/430PB control and a maximum spindle speed of 15,000 rpm. If you are looking to get high-quality machining capabilities, consider the Matec HV30 universal machining centre we have for sale. Contact us for further details.
Travel X/Y/Z: 650mm/500mm/475mm, table dimensions X/Y: 1530mm/450mm, max. table load: 400kg, spindle taper: SK40, max. spindle speed: 4000rpm, spindle power: 7.5kW, milling head swivel range: 140°, control: Heidenhain TNC 620. Weight: approx. 2750kg, machine dimensions X/Y/Z: approx. 2200mm/2300mm/2050mm. An on-site inspection is possible.
A Studer CNC universal cylindrical grinding machine in need of repair is offered. Mains voltage/frequency: 380V/50Hz, control: Siemens SINUMERIK System 3, drive system: Siemens SIMODRIVE, measuring system: Marposs E5. Including various accessories. Documentation available. An on-site inspection is possible.
x-travel: 1000 mm y-travel: 380 mm z-travel: 430 mm total power requirement: 5,5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2 x 2 x 2 m No. 4471 Universal milling machine IBERIMEX U 1000 Working area: 1000 x 540 x 430 Drive: 5.5 kW Control: Visulesta 4 digital display Table clamping surface 1500 x 360 mm documentation Spindle holder ISO 50 Speed range 40 - 1750 min-1 Space requirement approx. 2 (3) x 2 x 2 m Weight approx. 3 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 762 mm y-travel: 508 mm z-travel: 508 mm B-axis (table): +120/-35 Grad c-axis: 360 Grad control: HAAS für 5 Achsen tool piece magazine with: 40 Plätzen number of spindle speeds: 12000 U/min dimensions of the machine ca.: 4.3 x 2.35 x 2.8 m weight of the machine ca.: 8.5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Auction-ID: A1-48959-40
Mikron Universal Milling Machine Type 21D Heidenhain Control TNC 355 Tool holder ISO 40 21 spindle speeds from 40 - 4000 rpm Clamping table 350 x 700 mm Displacement distances: X=450 mm / Y=400 mm / Z=400 mm 400 V Control voltage 24 V Total weight approx. 2410 kg
Fully automatic system for filling nested disposable syringes and closing with plunger stoppers, consisting of 4 Bausch+Ströbel components: TUM 9070 Tub unpacking machine for removing the cups from the bag using a sliding device DVE 9070 Cover and protective film removal SFM 5072 Filling and sealing machine NTS 8140 Transport system Output max. 36,000 disposable syringes/h, infinitely adjustable For disposable syringes 0.5 - 10 ml depending on format set For plunger stoppers diam. 5.00 - 21.00 mm, H 7.00 - 15.00 mm depending on format set For 100 mm nest For tub H max. 130 mm Parts in contact with the product made of stainless steel AISI 316L IQ/OQ qualification documentation in accordance with Annex D5 GAMP 5 and Annex 15 EU-GMP in English Calibration (KAL) for all process-relevant measuring systems Material specification PLC Siem ...
The facility is an exhibition facility or test facility in an absolutely new condition. The plant was built in 2024 for the filtration of cooling lubricants in tool grinding: oil + carbide. Filtration is carried out with the help of 61 filter cartridges located in a cylinder housing. The dirty oil is pressed through the filter surface and runs through the inside of the filter into the clean container. The filter works in fully automatic mode. The filter pressure is monitored during the filtration process and as soon as the filter cake has been formed and the pressure increases, the filter is backwashed with compressed air. Then the filtration process starts all over again. The filtration system can be directly connected to the grinding machine, lapping machine, honing machine, etc. Filtration is carried out without consumables, as the filter is backwashed (filter flow, etc.). Th ...
Suitable for 0.7l-VdF bottles, capacity: 3000bottles/h, running direction: right to left, the packing head is equipped with 12 long-life packing tulips, the machine was used in low-volume operation, is very well maintained and has low operating hours, an on-site inspection is possible.
An FGC extraction system for the extraction of oil and coolant aerosols from one or more CNC machines is offered. Volumetric flow rate: 600m³/h, motor power: 1.5kW. Including telescopic stand. The filters should be replaced. An on-site inspection is possible.
table length: 4100 mm table width: 1050 mm table height: 1600 mm total power requirement: 29 kW weight of the machine ca.: 28000 t dimensions of the machine ca.: 11X5X3,8 m Marke Kiheung Maschinen-Nr F668 Typ KNC-U1000 CNC-Marke Heidenhain CNC-Typ TNC 426 Baujahr 2002 Tischlänge 4.100 mm Tischbreite 1.050 mm Maximale Tischbelastung 8.000 kg X 3.600 mm Y 1.250 mm Z 1.600 mm Aufnahme BT50 Schnell 10.000 m/min Geschwindigkeit 0 - 4.000 RPM Beweglicher Tisch Huron-Fräskopf CNC gesteuerter Fräskopf Späneförderer Maschinengröße (LxBxH) 11.000 x 5.000 x 3.800 mm Maschinengewicht 28000 kg Magazinplätze: 30 Spindelantriebsmotor: 29 Kw Ausgestattet mit 4. Achse. Tischdurchmesser: 630 mm Ø Belastung: 900 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm control: Siemens 840D total power requirement: 13/9 kW weight of the machine ca.: 4,7 t dimensions of the machine ca.: 3,4 x 2,5 x 2,2 m Brand DMG Mori Seiki Machine no F652 Type DMU 50 Ecoline Control Siemens 840D Year of make 2012 Table width 500 mm Table diameter 630 mm ø Table adjustable in degrees X 500 mm Y 450 mm Z 400 mm Spindle taper SK40 Speed minimum 20 RPM Speed maximum 10.000 RPM Maximum table load 200 kg Chip transport Machine size 3.400 x 2.500 x 2.200 mm Machine weight 4.700 kg Tool magazine positions: 30 B-as: -5/+110 ° C-as: 360 ° Engine power: 13/9 Kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre height: ? mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: 400330300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Auction-ID: A1-49790-1406
Auction-ID: A1-49790-1405
Refrigeration unit FRASCOL LB2-Q736-0Y-2T with condenser USAC16E and compressor Q7-36.1Y1000. FRASCOL Q7-36.1Y1000 Compressor Power: 7 hp Flow rate: 35.86 m³/h with 2 pcs fan HIDRIA R11R-4525A-4T-5747 Power: 315W and 1420 rpm Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
MAHO Milling Machine MH400 - Mounting SK40 - With digital display - Brake motor for work spindles: 2.2 kW - X-axis: 400 mm - Y-axis: 375 mm - Z-axis: 250 mm - Width: 150 cm - Depth: 120 cm - Height: 180 cm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.
Stephan UM5 Universal Machine Machine is in good condition according to its age Two speeds + pulse button 400V Removable boiler with knife insert Plastic sash in the lid at the tip worn, this does not affect the function Video about test run available
Auction-ID: A1-49818-1406
throat: - mm tool adaptor: MK power requirement: 0 kW max. pitch circle: ca. 250 mm total power requirement: 0 kW weight of the machine ca.: 75 kg dimensions of the machine ca.: Ø 500 x 500 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 720 mm y-travel: 360 mm z-travel: 420 mm total power requirement: 8 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,56 x 2,56 x 1,82 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year of manufacture 1997 Foil Packing Machine Angle welding machine Manual installation Shrink tunnel Mobile substructure Price on request. We deliver and install worldwide!
Auction-ID: A1-49818-1405
x-travel: 720 mm y-travel: 360 mm z-travel: 420 mm total power requirement: 8 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Auction-ID: A1-49922-61
VacuAide 7314P-U QSU: Quiet and efficient suction for home and clinical use The VacuAide 7314P-U QSU from DeVilbiss is a medical device designed to perform airway suctioning safely and hygienically. Thanks to its low noise level, it ensures optimal patient comfort, without compromising the suction power needed for many medical applications. This model in the QSU (Quiet Suction Unit) range is particularly suitable for clinical environments as well as home use, offering flexibility and practicality. One of the main strengths of the VacuAide 7314P-U is its ultra-quiet operation, making it an ideal choice for use in sensitive environments, such as hospital rooms or at home. With a suction performance of 50 to 550 mmHg, this device meets a wide range of needs, while ensuring consistent and reliable performance. Its intuitive design allows for easy handling with a single switch to turn the de ...
maximum number of results exceeded
please refine your search
100 € 
