un used for sale

1 set ( 4 pieces ) clamping jaws for Vertical Borer T-slot distance 180 mm Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.

floor-plate length:6000 mm floor-plate width:2000 mm floor-plate height:460 mm weight of the machine ca.:12,5 t dimensions of the machine ca.:6 x 2 x 0,46 m

Weinig Unimat 23 four-sided planer Working width 230mm Working height 160mm Number of spindles 5 Spindle arrangement Bottom 5.5kw Rights Left 7.5kw Top 11kw Bottom 5.5kw Pneumatic material clamps divided into 4 sections Feed speed adjustable by variator 4-24m/min Input table length 1980mm Drive on cardan shafts Thick soundproof cab Machine dimensions 380x226x178cmH CE Certified

floor-plate length:6000 mm floor-plate width:2000 mm floor-plate height:460 mm weight of the machine ca.:12,5 t dimensions of the machine ca.:6 x 2 x 0,46 m

length:500 mm width:320 mm height:800 mm weight of the machine ca.:0,25 t Angular clamping device made by cast iron with 5 T-slotss 22 mm

Samco Unilev 15 edge sander Tape dimensions 150 x 2170 mm Two belt speeds Adjustable Boot Table top adjustable at 0-30 degrees Adjustable sanding height Pneumatic tensioning of the sanding belt Sanding belt oscillation Motor power 3kw

turning diameter: max 300 mm turning length: max. 2000 mm control: Siemens Serie 810D turning spindle: Durchlass 90 mm : 300 mm Feed speed: 6/6 m/min. number of tools: 8 quill stroke: 300 mm diameter of quill: 105 mm taper MK: 6 coolant tank: 100 l total power requirement: 15 kW weight of the machine ca.: 4650 KG dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal Machine Mixer Type 45 Bowl capacity approx. 45 litres with tilt function 180° Capacity approx. 10 to 180 litres/hour E-system NEW Connection 400V, 5.5 kW,16A-CEE plug Machine More blenders in stock!

Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 28 cooling units are available. All 28 cooling units fit into a 40Hc container for transport.

Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 17 cooling units are available. All 17 cooling units fit into a 40Hc container for transport.

Shredder UNTHA RS-60 Main shaft speed: 17.3 rpm Secondary shaft speed: 20.5 rpm Chopping discs width: 19 mm Drive power 2x30 kW 400 V, 50 Hz Screen perforation round: Ø 35 mm External dimensions of the cutting unit with drive: LxWxH: 2440x1470x1040 mm Total weight without base: approx. 7,500 kg Control cabinet with wiring : complete incl. 1xComplete second knife set after overhaul at Untha Incl. funnel and base clean machine, checked, always maintained, 1 owner !

Baked goods freezer Double Door Freezer for Euro sheets 60/80 - 58/78 Dimensions: 810 x 1020 x 2200 mm, WxDxH Connection 220V, 1500 Watt Occasion

table length: 2000 mm table width: 1800 mm table load: 12,5 t Travel: 1250 mm width of T-slots: 28 mm T - slots distance: 160 mm total power requirement: 6 kW weight of the machine ca.: 9,2 t dimensions of the machine ca.: 3,7x2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter 130 mm - ISO 50 tool - rated power of the spindle rotation motor 18.5 kW - installed power 4 0kW - spindle drive motor speed range 722-1455 rpm - spindle rotation range 2.25-900 rpm, 27 degrees - disc rotation range 2.25-180 rpm, 18 degrees - X axis feed speed range 0-5000 mm/min, stepless - Y axis feed speed range 0-5000 mm/min, stepless - Z axis feed speed range 0-3150 mm/min, stepless - B axis feed speed range 0-4000 mm/min, for Ø1m, steplessly Bg2Ltmk8Gq - machine weight 30 t

This 3-axis Unisign uniport 6000 gantry milling machine was manufactured in 2010. It features an impressive X-axis travel of 10,000 mm, Y-axis travel of 1,500 mm, and Z-axis travel of 1,000 mm. The machine is equipped with a powerful 36 kW main drive and a 30-pocket automatic tool changer. If you are looking to get high-quality milling capabilities, consider the Unisign uniport 6000 gantry milling machine we have for sale. Contact us for further details.

x-travel: 1150 mm y-travel: 350 mm z-travel: 500 mm table surface area: 1500x380 mm turning speeds: 42-1400 U/min spindle taper ISO: 50 tool clamping electrical: bore stroke: 110 mm total power requirement: kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This machine tool was manufactured in 2003. The Dürr Universal 71C features a comprehensive setup including a work tank, flood tank, continuous distillation, and an automatic sliding door. It also boasts a vacuum unit for drying, a condensate tank, and a drying cooler. Optional equipment like a control panel and ultrasound enhances its versatility. A great opportunity to buy this Dürr Universal 71C machine tool. For more information about this machine tool, please reach out to us.

REF-2366 TATOMA MT-13-E HORIZONTAL UNIFEED MIXER 6000KG WITH LOAD CELLS Horizontal unifeed mixer for solids with load cells Manufacturer: TATOMA Type: MT-13-E Serial no.: 1000 Year: 1998 Capacity: 6,000 kg Volume: 13 m3 ABB motor: 75 HP/55 kW. 1,500 rpm Tank dimensions: length 4,450 mm, width 1,780 mm Outfeed height: 700 mm Overall dimensions: length 6,500 mm, width 2,300 mm, height 2,700 mm CE marking

This 6-axis Universal Robots UR5 e was manufactured in 2023. It features a payload capacity of 5 kg and a reach of 850 mm. The robot arm is equipped with a 12-inch touchscreen and a user-friendly graphical interface for programming. If you are looking to get high-quality automation capabilities, consider the Universal Robots UR5 e robot arm we have for sale. Contact us for further details.

Danmatic Spray unit spray glazing machine 2017, stainless, spray glazing machine, belt dimensions 2150mm x 820mm, stainless mesh belt, four top mounted spray jets, adjustable pressure controls, can work with a great variety of liquids from pure water to oil and glaze egg, mobile, 3Ph

turning diameter: . mm turning length: . mm control: . turning diameter: . mm turning length: . mm swing diameter over bed slide: . mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

charge load: - Cleansing load time: - internal dimension: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 60 bar liter capacity: 40 l power capacity: 5,5 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 1,2 x 0,8 x 1,55 m No. 4972 Hydraulic Aggeregat 250 l / 60 bar / 40 l/min formerly HEYLIGENSTAEDT Heynumat 10 Drive: 5,5 approx. 300kg ( estimated ) Transport dimensions approx. 1.2 x 0.8 x 1.55 m ( EUR exchange pallet ) Dimension: 1200 x 750 x 1550 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 4 St. Number of tools: 11 St. Spindle diameter: 50,40 mm Spindle length: 285,125 mm length: 4000 mm width: 2000 mm height: 2200 mm Weinig Univar 10/3 folding machine --------------------------------- Machine will be cleaned and chcked before delivery For milling around windows, doors and the like with uneven circumferential profiles. Machine suitable for wood thickness 68 to 92 mm Time required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes. The available tool positions are selected using a selector switch on the control panel retrieved. Machine with 3 hydraulically controlled right precision Lifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindle The spindle stroke takes place in a U-movement, so that the opening is possible for short parts The milling stop remains as small as possible. Spindle stroke horizontally fine Adjusta ...

Univap TCM/E 5ED Evaporator with electric defrost unit 2021, Evaporator with electric defrost unit, comes with controls and external KD external fridge plant

Eight segments available

Key data: 102 mm, 1530 mm, 900 mm

Spindle diameter Ø 102 mm Taper ISO 50 Horizontal spindle travel 710 mm Cross travel (X) 1,530 mm Vertical Travel headstock (Y) 900 mm Longitudinal travel (Z) 1,500 mm Table 1,250 x 1,400 mm R.P.M. 8 – 1,600 (18x) kW 11 Volts 380 Cycles 50 Including: Digital readout

Key data: 102 mm, 1600 mm, 900 mm

Spindle diameter Ø 102 mm Taper ISO 50 Horizontal spindle travel 710 mm Cross travel (X) 1,600 mm Vertical Travel headstock (Y) 900 mm Longitudinal travel (Z) 1,520 mm Table 1,250 x 1,400 mm R.P.M. 8 – 1,600 (18x) kW 11 Volts 380 Cycles 50 Including: 3-axis Digital readout with point to point control Heidenhain 310

Key data: 102 mm, 1600 mm, 1250 mm

Spindle diameter Ø 102 mm Taper ISO 50 Horizontal spindle travel 710 mm Cross travel (X) 1,600 mm Vertical Travel headstock (Y) 1,250 mm Longitudinal travel (Z) 1,500 mm Table 1,250 x 1,400 mm Table load 5 ton R.P.M. 4 – 1,250 (18x) kW 23 Volts 380 Cycles 50

Heidenhain TNC 426 Table 1600 x 2000 mm Max. load 12.500 kg Spindle diameter 130 mm Taper ISO 50 Cross travel (X) 3,500 mm Vertical travel headstock (Y) 1,600 mm Longitudinal travel (Z) 1,250 mm Horizontal spindle travel (W) 850 mm RPM 4 – 1,120 kW 45 Volts 380 Cycles 50 Including: Facing head Ø 720 mm Facing head slide travel 240 mm Machine weight 31,1 ton

Control Heidenhain TNC 426 Mach.no. 11648 Table 1,600 x 1,250 mm Spindle diameter 130 mm Taper ISO 50 Cross travel (X) 2,000 mm Vertical travel headstock (Y) 1,600 mm Longitudinal travel (Z) 1,050 mm Horizontal spindle travel (W) 850 mm RPM 4 – 1,120 kW 45 Volts 380 Cycles 50 Including: Machine weight 26,3 ton

WITH BASE CABINET Ser. No.: 12075 Book format: 320 x 220 mm (Max. 320 x 300 mm) Cover format: Cover size: 330 x 480 mm (Max. 330 x 680 mm) Book thickness: 2 - 50 mm Cycle speed: up to 300 cycles per hour Heat-up time: 30 - 40 minutes Equipment / Additional information: Adhesive: Planamelt R 1323-2

surface area: 700 250 mm no. of flutes: 5 groove width: 12 mm total power requirement: 0 kW weight of the machine ca.: 75 kg dimensions of the machine ca.: 700250320 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Autom. tube filling machine for metal tubes. Machine incl. the following accessories: heatable product container, stirrer, coding device etc. Furthermore 4 pcs. format parts for tube Ø: approx. 13,5, 28, 30 and 35 mm. PLC TELEMECANIQUE.

used baler Manufacturer: UNOTECH Type: UPAXX 70 Year of Make: 2022 specifications: Press force: 700 kN Specific pressing force: up to 450 N/cm² Channel cross-section (h x w): 350 x 500 mm Filling opening (l x w): 1,250 x 420 mm Main pump drive power: 30 kW Performance under operating conditions: - At 85 kg/m³ bulk density in 1-stroke operation approx. 1.7 t/h - At 85 kg/m³ bulk density in 2-stroke operation approx. 2.5 t/h Package density for tin cans: up to 1,200 kg/m³ Machine weight depending on equipment: 9.5 t Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Machine has slight fire damage and will be completely repaired if the order is placed.

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----------------------------------------- Machine will be cleaned and completely checked Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw --------------------------- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Item 2: tenoning spindle ---------------------------- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 32 ...

surface area: 800455 mm no. of flutes: - groove width: - mm weight of the machine ca.: t dimensions of the machine ca.: m Universal swivelling + tilting table Table top rotatable 360 Tiltable forwards/backwards -15 / 45° Sideways swivelling +/- 30 Cross adjustment ( Y ) 160 mm Mounting surface 350 x 250 mm ( additional adapter plate ) Table surface 800 x 455 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Caterpillar C4.4 - Unused - 110 kW - JKT

Folder Gluer Jagenberg Simplex Universal 875 Baujahr/ Year 1982 - Serial-No. 8128 Produktionsmöglichkeiten Längsnaht, 2 und 3-Punkt Material 160 - 600 g/m2, Vollpappe und Wellpappe bis 4mm Format max. 600mm x 875mm / 24" x 34" Format min. 70mmm x 55mm / 2.75" x 2.25" Maschinenabmessung BxL 1500mm x 6800mm / 59" x 268" Länge Pressband 2600mm / 102" Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Qty. 1 Second-hand plate storage system Mfc.: Kasto Maschinenbau GmbH Type: UNITOWER B1.5 Built: 2018 Still in operation! Number of storage spaces: 86 Pallets size: Usable dimensions: 3000 x 1500 x 90 mm – L x W x H External dimensions: 3290 x 1616 x 160 (70) mm – L x W x H Payload per pallet: 1500 kg Use for surface elements made of wood, polycarbonate, etc. Only about 300 movements have taken place since 2018 - one movement takes about 2 minutes. The system is regularly serviced by the manufacturer. Speeds Hoist: 16.0 m/min. Pull and push device: 20.0 m/min. System dimensions approx.: 8855 x 5900 x 5730 mm – H x L x W

Universa 400 Standard Bj 2004 Compact 450 SO Bj 2005 MGZ 400 Hand Feeder Bj 2004 Immediately available from stock

Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine Kallfass KC5050/450 Universal Year 2005 - Serial-No. VD 12.05.741 Mobile on mobile frame After sealing - automatic transport into tunnel Sehr guter Zustand - TOP Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Vollautomatische Einschweißmaschiene mit Einschweißtunnel - Automatic Foil sealing machine Kallfass Universa 400 NT - Universal 450 N Year 2000 - Serial-No. S 04.00.9 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Dräger Protection Unit 6904409 complete unit Year of construction 2013 The item is technically in good condition, Nevertheless, this is a used items, which shows signs of wear, or may have.

Adpak Uniblock 712AD Shrinkwrapper and heat tunnel Automatic shrinkwrapper and heat tunnel, sealing bar 750mm, with hold down, tunnel aperture 600mm x 450mm, mobile, 3Ph

Heftkopf / Stitching Head Hohner Universal 48/5 S Baujahr / Year 2003 - Serien-Nr. / Serial-No. 495026262 Schmalheftkopf / Narrow Stitching Head Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Used Pretzel String Roller / Cone Winding Machine UNIVERSUM, Type: LWT3/80-40J-EB2/20 -Overhauled- - for wrapping croissants - Dough strand roller for pretzels - new belts, new parts, overhauled - Very good condition - Ready for immediate use Visits and test runs are possible by arrangement.

Doka Framax Element 120 x 240 Uni The frames and the formlining are in good condition and can be used immediately. The high-performance steel frame formwork for large-scale formwork with the crane. Large element for fast formwork Easy to clean thanks to powder-coated frames Doka Framax steel panel 120 x 240 Uni Frames and formlining are in good condition and can be used immediately. The high-performance steel framed formwork for large-area forming by crane. Large element for fast forming Easy cleaning due to powder-coated frames

Product number: 3065 Type: UNIMIX 1500L Serial number: 62267 Year of construction: 2002 Mixer: 1500 litres, double shaft paddle mixer Infeed height: 1850 mm Outfeed: 800 mm, double tote bin Weighing cells: Flintec SB4-20kN GP-s Indicator: Bizerba Height open lid: 3500 mm Power: 3 x 400V, 50Hz, 11kW Dimensions: 2600 x 1700 x 2300 mm Machine on weighing cells Suitable for CO2 cooling