un used for sale

Kallfass universa 5050 sealing machine, kallfass compact 650 shrinktunnel, year 2000, welding width 525 mm, clearance: 150 mm, speed up to 35 cycles per minute, fully automatic

1x champagne cork orienter Cames / Kematec, used, type: P UNO E 94, built in 1994, capacity max. 5,000 corks/h, the machine ran flawlessly until the end, dimensions: D: 2.20 m, W: 1.35 m, H: 2.40 m, NP 17 ́ +, technical data see mail Kematec 22.11.19 Price: €6,900 plus VAT from stock Dolgesheim more offers..: vino-tec

accuhead machine for containers up to 40 ltr. Extruder 90/24D. accuhead 6 ltr. Clamping force 350 kN. Cables partially renewed. Oil tank and pipes cleaned. New control system is prepared (B&R) and can be installed at short notice

automatic baler Manufacturer: UNOTECH Type: UPAMAT 100 V 5 Factory overhauled by the manufacturer in 2024 Technical data: Cutting force: 1,000 / 315 KN / bar Specific pressing pressure: 12.12 kg/cm² Filling opening 2,000 x 1,020 mm Channel format: 750 x 1,100 mm (H x W) Bale weight: 500 - 800 kg (depending on material and bale length) Binding: 5-fold vertical Drive power: 1 x 75 kW Nominal current consumption: 175 A Connection fuse max. 200 A Pump: Internal Gear Pump Noise emission: 82 - 85 dB/A Machine weight: 32,000 kg Control: Siemens S7 - IM-151 Capacity: approx. 340 m²/hour under operating conditions Throughput: with a bulk density of 30 kg/m³ approx. 10.0 t/h with a bulk density of 50 kg/m³ approx. 16.0 t/h at 100 kg/m³ bulk density approx. 32.0 t/h Equipped with: Press box planked with HARDOX central l ...

spindle diameter: 110 mm weight: ca. 130 kg Used spindle support for a Table Type Borer, for example UNION BFK with 110 mm spindle dia. Good condition ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 7000 mm y-travel: 2000 mm taper ISO: 50 w-axis: 1100 mm z-axis: 350 mm voltage: 400 V total power requirement: 30 kW weight of the machine ca.: . t dimensions of the machine ca.: . m Universal milling head Heidenhain D.R.O. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Collet set 15 pieces with drill chuck Vertical Drilling and Milling Head - T-Slot Width 12 mm Cutter head Coolant Setup x - travel 500 mm y - travel 200 mm z - travel 400 mm Feed: 5.6 - 238 mm/min with quill stroke Speed: 35.5 - 1800 rpm with rapid traverse Clamping area: 800 x 300 mm Total power requirement 16 A Spindle holder ISA 40 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

Weinig Unimat 23 four-sided planer Working width 230mm Working height 160mm Number of spindles 5 Spindle arrangement Bottom 5.5kw Rights Left 7.5kw Top 11kw Bottom 5.5kw Pneumatic material clamps divided into 4 sections Feed speed adjustable by variator 4-24m/min Input table length 1980mm Drive on cardan shafts Thick soundproof cab Machine dimensions 380x226x178cmH CE Certified

Samco Unilev 15 edge sander Tape dimensions 150 x 2170 mm Two belt speeds Adjustable Boot Table top adjustable at 0-30 degrees Adjustable sanding height Pneumatic tensioning of the sanding belt Sanding belt oscillation Motor power 3kw

turning diameter: max 300 mm turning length: max. 2000 mm control: Siemens Serie 810D turning spindle: Durchlass 90 mm : 300 mm Feed speed: 6/6 m/min. number of tools: 8 quill stroke: 300 mm diameter of quill: 105 mm taper MK: 6 coolant tank: 100 l total power requirement: 15 kW weight of the machine ca.: 4650 KG dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Portable firewood saw for cutting up strips, branches and other waste wood. Technical data: Length: 950 mm Width: 600 mm Cutting height: approx. 60 mm Motor: 2.2 kW Connection: 16 A / 400 V Condition: Gebraucht Location: Tauberbischofsheim, Germany

Technical data: Conveyor belt width: 150 mm Motor: 3 kW Weight: 490 kg Condition: Gebraucht Location: Tauberbischofsheim, Germany

WEINIG UNIVAR 10 automatic rebating machine from a UC-Matic window production line, not in working order. Technical data: Year of manufacture: 1997 Condition: Gebraucht Location: Tauberbischofsheim, Germany

A wide range of second-hand spare parts, as well as complete units, control systems and switchboards for Weinig Univar (and other brands) are always in stock. Please contact us. Sample images. Condition: Gebraucht Location: Tauberbischofsheim, Germany

A block separator or block trap in mint condition for sorting out wooden blocks in extraction systems. Technical data: Pipe: 300 mm Length: 1,170 mm Width: 380 mm Height: 820 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

A compact and lightweight portable extraction system for removing wood shavings and sawdust. Technical data: Motor: 0.37 kW Length: 650 mm Width: 500 mm Height: 1,800 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

used baler Manufacturer: UNOTECH Type: UPAXX 70 Year of Make: 2020 Machine was only in operation for about 6 months and was removed from the plant in 2022. Technical data: Press force: 700 kN Specific pressing force: up to 450 N/cm² Channel cross-section (h x w): 350 x 500 mm Filling opening (l x w): 1,250 x 420 mm Main pump drive power: 45 kW Performance under operating conditions: - At 85 kg/m³ bulk density in 1-stroke operation approx. 2.5 t/h - At 85 kg/m³ bulk density in 2-stroke operation approx. 4.2 t/h Package density for tin cans: up to 1,200 kg/m³ Machine weight depending on equipment: 10.3 t Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Photos will be added at short notice.

Universal Machine Mixer Type 45 Bowl capacity approx. 45 litres with tilt function 180° Capacity approx. 10 to 180 litres/hour E-system NEW Connection 400V, 5.5 kW,16A-CEE plug Machine More blenders in stock!

Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 16 cooling units are available. All 16 cooling units fit into a 40Hc container for transport.

UNBEKANNT 120 ist ein Schraubstock, konzipiert für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitskapazität: Backenbreite 120 mm. Erreicht enge Toleranzen; typische Einsatzbereiche: Automotive, Uhrenindustrie, Werkzeugmaschinen, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 17 cooling units are available. All 17 cooling units fit into a 40Hc container for transport.

Shredder UNTHA RS-60 Main shaft speed: 17.3 rpm Secondary shaft speed: 20.5 rpm Chopping discs width: 19 mm Drive power 2x30 kW 400 V, 50 Hz Screen perforation round: Ø 35 mm External dimensions of the cutting unit with drive: LxWxH: 2440x1470x1040 mm Total weight without base: approx. 7,500 kg Control cabinet with wiring : complete incl. 1xComplete second knife set after overhaul at Untha Incl. funnel and base clean machine, checked, always maintained, 1 owner !

spindle diameter 130 mm - ISO 50 tool - rated power of the spindle rotation motor 18.5 kW - installed power 4 0kW - spindle drive motor speed range 722-1455 rpm - spindle rotation range 2.25-900 rpm, 27 degrees - disc rotation range 2.25-180 rpm, 18 degrees - X axis feed speed range 0-5000 mm/min, stepless - Y axis feed speed range 0-5000 mm/min, stepless - Z axis feed speed range 0-3150 mm/min, stepless - B axis feed speed range 0-4000 mm/min, for Ø1m, steplessly Bg2Ltmk8Gq - machine weight 30 t

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Quantity: 10 collets -Various sizes: 5-25 mm -Drawing in the pictures -Price/Sale: complete -Weight: 2.1 kg

Homogenizing Mixer Manufacturer: Ekato Unimix Type SRT 50 Order# 4808/2, Series# 70888. Description • GMP compliant • EKATO PARAVISC agitator with EKATO UNIMIX scraper system Power 3 Kw, 5.2 Kw at 87 Hz Speed 21-121 rpm • Patented homogenizer EKATO UNIMIX S-JET, located at the lowest point of the container, for internal and external homogenization Power 5.5 kW, 9.5 Kw at 87 Hz Speed 1,000 – 4,800 rpm • Lid lifting device can be swivelled • Integrated CIP cleaning system • Integrated heating/cooling system Electric heating 12 Kw Control Siemens S7 with OP 17 Pressure and vacuum resistant with integrated vacuum system Product space: Capacity 85 litres / 50 l usable volume, Pressure -1/2 bar, Temperature 10/152 °C, Thermal system / double jacket: Capacity 11 l Pressure -1/+4 bar, Temperature 10/152 °C, Complete documentation in ...

REF-2366 TATOMA MT-13-E HORIZONTAL UNIFEED MIXER 6000KG WITH LOAD CELLS Horizontal unifeed mixer for solids with load cells Manufacturer: TATOMA Type: MT-13-E Serial no.: 1000 Year: 1998 Capacity: 6,000 kg Volume: 13 m3 ABB motor: 75 HP/55 kW. 1,500 rpm Tank dimensions: length 4,450 mm, width 1,780 mm Outfeed height: 700 mm Overall dimensions: length 6,500 mm, width 2,300 mm, height 2,700 mm CE marking

Cylindrical grinding machine manufactured in 2015. This OKAMOTO OGM 250 UNC III features a maximum machining diameter of 200 mm and a distance between centres of 500 mm. It includes an X-axis travel of 215 mm and a Z-axis travel of 762 mm, providing efficient grinding capabilities. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO OGM 250 UNC III machine we have for sale. Contact us for further details.

Danmatic Spray unit spray glazing machine 2017, stainless, spray glazing machine, belt dimensions 2150mm x 820mm, stainless mesh belt, four top mounted spray jets, adjustable pressure controls, can work with a great variety of liquids from pure water to oil and glaze egg, mobile, 3Ph

Travel X/Y/Z/W: 1500mm/1250mm/1000mm/550mm, B-axis: 360°, boring spindle diameter: 110mm, spindle speed: 4000rpm, gear ranges: 2, rapid traverse: 15m/min, tool taper: SK50, table dimensions X/Y: 1000mm/1250mm, T-slot width: 22mm, height of clamping surface above floor: 1050mm, max. table load: 6000kg, control: Heidenhain TNC 426. With electronic handwheel. Weight: approx. 13500kg. An on-site inspection is possible.