ultra rotor used for sale

Pressure booster system, dry rotor pump heating pump centrifugal pump, water pump, inline pump used 2 pumps Manufacturer: Grundfos Type TP 150-250/4 A-F-A-BQQE Q 2x 295 m³/h at 20.4 m 16 bar 120°C 22 kW with pump control 96754726 Dimensions approx. 2500 x 1300 x 1600 mm All articles are checked for function before delivery, if technically possible! Changes and errors in the technical data, information and prices as well as prior sale reserved.

The machine has received a new rotor, with spare parts and documentation, without electrics and controls, an on-site inspection is possible.

Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction unknown, was overhauled in 2022.

-Granulator with sound insulation -Working width: 600 mm -Rotor diameter: 400 mm

Key data: 900 , 134 , 35

Now fully refurbished and in our stock in Wellingborough, Northamptonshire is this tie-bar-less Engel Victory 330/90 Tech injection moulding machine. Fitted with a 35mm plasticising unit which gives a maximum shot weight of 134 (PS) (g). This is a high specification machine with double core pull, CC100 controller, singe pneumatic core pull and 8 zone hot runner controller built in. It comes complete with system disks to suit the machine. The unique design of these machines allows for large tools to be installed with ease and often much larger than could go in comparable 90T machines with tie-bars. A very versatile machine with proven technology and good support from the people at Engel UK. This machine is now holding maximum lock, has no detectable wear in the plasticising unit and is cosmetically excellent. You can find out more about the work we’ve done to this specific machine by ...

Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction unknown, was overhauled in 2022.

Ultrasonic banderolier ATS US 2000 LD; good condition; cleaned and tested; Bandwidth 30mm; loop machine; soft voltage; fixed loop size; Sheet width 340mm; Arch height 180mm; Score 437,000. Ultra sonic banding machine ATS US 2000 LD; good condition; cleaned and checked; band width 30mm; loop machine; soft loop; fixed loop; arch width 340mm; arch hight 180mm; counter 437,000.

Opening dimensions: 450x500mm, rotor diameter: 400mm, rotor speed: 450/min, length: 1090mm, width: 1700mm, height: 2120mm, weight: 1.75t, connected load: 22kW, with cyclone separator and documentation, decommissioned since 2016, on-site inspection is possible.

Working width: 3500mm, with circumferential unwinding, fettling box, accumulator, inspection table, ultrasonic cutting unit, fettling box and circumferential rewinding.

There are 8 identical Enercon E58 wind turbines available, year of construction: 2003, operational since: 2005, control system: CS58b, rated power: 1000kW, hub height: 70.5m, rotor diameter: 58m, operating hours: 132,303h, yield since start of operation: approx. 30 million kWh. Documentation available. On-site inspection is possible.

Specifications: Drill diameter: 3 - 32 mm Center angle: 90° - 140° Speed grinding wheel: 4800 1/min Connection: 230 V Motor power: 0.25 kW Weight, approx.: 32 kg Dimensions LxWxH, approx.: 360 x 250 x 310 mm Characteristics: - Ideal for grinding HSS/carbide twist drills - Easy to use - Safe operation due to forced grinding process - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including spout alignment for flawless centering of the drill on the workpiece and to reduce the feed force during drilling - Device for back grinding the drill edges to reduce friction between drill and workpiece - Rotor with precision ball bearing - Vibration-free running due to high dead weight - CE Scope of delivery: - Grinding wheel CBN - 30 ER collets ER 40, 13 - 32 mm (suitable for intermediate sizes) - ...

Volume flow: 7650m³/h, heating output: 21kW, connected load: 87kVA, weight: 960kg.

Specifications: Drill diameter: 3 - 20 mm Center angle: 90° - 140° Speed: 4800 1/min Connection: 230 V Motor power: 0.12kW Weight, approx.: 8.6 kg Dimensions, approx.: 290 x 150 x 180 cm Characteristics: - Ideal for grinding HSS/carbide twist drills - Safe operation due to forced grinding process - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including propping alignment to reduce feed force - Device for back grinding the drill edges to reduce friction between drill and workpiece - Rotor with precision ball bearing - CE Scope of delivery: - Grinding wheel CBN - 11 collets ER 20, 3 - 13 mm - 7 collets ER 24, 4 - 20 mm - Collet holder ER 20, ER 25

An inspection is possible.

Rotorless rotational shear vulcameter with filter mats, calibration weights, new stepper motor and documentation. The device has been recalibrated and the chamber renewed, control unit has been replaced with a standard PC connection, on-site inspection is possible.

Key data: 1000 , 158 , 40

In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 40mm plasticising unit which gives a maximum shot weight of 158 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines from STV Machinery undergo  ...

Ultrasonic banderolier ATS US 2000 LD; good condition; cleaned and tested; Bandwidth 30mm; loop machine; soft voltage; fixed loop size; Sheet width 340mm; Arch height 180mm; Meter reading 253,000. Ultra sonic banding machine ATS US 2000 LD; good condition; cleaned and checked; band width 30mm; loop machine; soft loop; fixed loop; arch width 340mm; arch hight 180mm; counter 253,000.

Process paths (X/Y/Z): 300mm/320mm/100mm, 3-axis interpolated, 16 inputs and 16 outputs, programming control panel, memory card, with CE. ULTRASAVER dosing kit: pressure range: 0-7bar, viscosity: low to high. Cartridge holder for automatic dispensing systems: Holder size: 3cc, 5cc, 10cc, 30cc or 55cc, with spacers. JR-1001 mechanical zero point correction.

COMPOSED OF: 1 x Rotor Remanufactured + balanced+ equipped 2 x Rotor (need to be refurbished) 1 x Clamping device for balancing 9 x Impact strips (Large) 6 x Impact bar (small) 2 x Enema cone 3 x tear-off edge various rotor protection plates CONSISTING OF: 1 x Rotor newly reconditioned + balanced+ fitted 2 x Rotor (must be reconditioned) 1 x Clamping device for balancing 9 x Blow bars (large) 6 x Blow bars (small) 2 x Inlet cone 3 x Tear-off edge Various rotor protection plates

Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h

NEW HERBOLD granulator Universal mill – heavy design -Year of construction 1998 - made in stainless steel - from the technical center (machine was used exclusively for experimental/demonstration purposes) - Rotor diameter: 300 mm - Working width: 500 mm - 3 rows of knives

Inlet: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor blades: 3 Dzk8qe Stator knives: 2 Drive: 7.5 kW Double slope With roller feeder, electric switch box and soundproofing box

Cutting mill - Martiplast Year of construction: Description: Slow-raining granulator with gearbox Power: 2.2 kW 2 stator knives, 2 x joints, rotor with the milling cutters Hopper inlet: 230x300 mm Grinding chamber opening: 230x230 mm Cutting mill without sieve, regulation of the grinding thickness by means of the hole adjustment between milling machine and stator knife Granulate mill is used to grind the very hard details, waste - just like the crusher Hole for material case is prepared for connection with suction conveyor Price: On request

Granulator - Rapid G-100-34 Year of construction: 2009 Description: Slow-raining granulator with gearbox Power: 1.5 kW 6 stator knives, 2 x joints, rotor with the milling cutters Hopper inlet: 360x520 mm Grinding chamber opening: 240x350 mm Cutting mill without sieve, regulation of the grinding thickness by means of the hole adjustment between milling machine and stator knife Granulate mill is used to grind the very hard details, waste - just like the crusher Hole for material case is prepared for connection with suction conveyor Price: On request

Inlet: approx. 500 x 490 mm Rotor width: approx. 500 mm Rotor diameter: approx. 300 mm Stator knives: 2 Rotor blades: 3

Main characteristics: -Designed for automatic dosing, twisting and filling of various mixtures under vacuum; -Funnel 240 liters; -With a rotor head; -Microprocessor control; -Electronic setting of the portion in the range from 5 to 100,000 grams with precise adjustment in steps of 0.1 grams; -The pressure of 35 bar; -Low noise level; -Ability to save about 80 user programs; -Productivity: 3500 ÷ 5000 kg / hour; -Installation power: 7 kW;

Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h

Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h

Ultrasonic tube filling and sealing machine with the following equipment: - Basic machine - Blank tube magazine incl. tube feeding chute for autm. Entering the blank tubes - automatic tube alignment according to the typeface or identification mark - Ultrasonic capping unit for closing PE and laminate tubes - Coding device on the tube fold, one-sided, incl. 4 set of coding numbers (0-9) - Cutting device on the tube fold - 1 format set for PE tube size D.35 mm - Format range 19mm - 50mm tube diameter - Cycle rate 15 - 30 tubes/min. Depending on product Please also note our current machine offers ( NEW + USED ) on Resale under : abc://abc.resale.de/angebotelinkd-user.php?myid=35837&dealer=1&order=1 & abc://abc.resale.de/angebotelinkd-user.php?myid=35846&dealer=1&order=1 & Visit us also on : cbv-pack

Ultrasonic tube filling and sealing machine with the following equipment: - Basic machine - automatic tube alignment according to the typeface or identification mark - Ultrasonic capping unit for closing PE and laminate tubes - Coding device on the tube fold, one-sided, incl. 4 set of coding numbers (0-9) - Cutting device on the tube fold - 1 format set for PE tube size D.35 mm - Format range 13mm - 50mm tube diameter - Cycle rate 10 - 15 tubes/min. Depending on product and operator Please also note our current machine offers ( NEW + USED ) on Resale under : abc://abc.resale.de/angebotelinkd-user.php?myid=35837&dealer=1&order=1 & abc://abc.resale.de/angebotelinkd-user.php?myid=35846&dealer=1&order=1 & Visit us also on : cbv-pack

Lindner Mircromat 2500 HP, 160 kW, with direct drive. Control cabinet with frequency converter. Knife size 43 x 43 x 19.5 mm (carbide). Number of blades 131. Max rotor speed 265 rpm With large filling shaft (5.6 cbm) and filling hood. Internal pusher 7.5 kW. Perforated sieve 30 mm. New machine

SMT Lathe 80001350 The machine was designed and manufactured to produce rotor shafts for power tools. The machine is designed and manufactured to perform the following operations automatically. - Load/unload parts automatically from/to tool carrier line with a pick-up & placement unit between the shaft ends. - Rotate ring seat + flat rotate commutator + rotate commutator. - Ring mounting - Commutator side - Ring mounting - Drive wheel side The machine has several production programs to produce different parts. Each program uniquely corresponds to a wave type Specifications Anchor wavelength from up to 92.5 - 163.1 mm Bearing pin diameter commutator side 8; 10; 12.5 mm Drive side 12; 8 mm Min. Available length bearing position 3.6 mm Package diameter 52; 55; 59 mm Ring dimensions Outer diameter 40 - 57.4 mm Inner diameter 37.4 - 56 mm Ring width 4 - 8 mm R ...

Colloid mill Manufacturer: Fryma Type: MZ-150/B Inline machine, horizontal Power: approx. 22-28 kW (type plate missing) with cross-toothed stator, normally toothed rotor installed on movable aluminium frame, on fixed castors with cable & plug Weight: approx. 350 kg LBH: 1000 x 550 x 650 mm

machine measurements: 3200x1700x2100 mm machine weight: -- kg power capacity: -- kW Condition: used Specification: Ultrasonic cleaning system type: Fisa 3VSD 150D - ultrasonic cleaning system consisting of: (see description) 1. tub 1 - cleaning agent 2. tub 2 - tap water 3. tub 3 - preservative 4. cleaning area 5. control - Cleaning cycle in tub 1 approx. 10-20 minutes - Operating temperature between 70-75°C - Extraction ON during cleaning process (Extraction fans are not are not included in the scope of delivery. - Cleaning with water in tub 2 - Cycle time in tub 2 approx. 10-20 minutes - Preservation in tub 3 - Preservation cycle time in tub 3 approx. 10 minutes - Blowing off the parts in the cleaning area under suction - incl. two cleaning baskets - The motors for the suction system in tub 1 and in the cleaning area are not included in the scope of delivery.  ...

Sorvall Discovery 90 Centrifuge Digital temperature setting: 0 to 40°C Speed 90,000 rpm without rotor

Colloid mill Manufacturer: Probst & Class (PUC) Type: JVM Item No.: 59201 Power: 9 kW with hopper with outlet chute with switchgear, cable & plug Rotor normally toothed, stator cross-toothed Weight: approx. 150-200 kg LBH: 600 x 430 x 960 mm

Gardner Denver V-VC 75 Vacuum Pump Oil-flooded rotary vane vacuum pumps with IE2 motors Easy maintenance. Final partial pressure 0.1 mbar Suitable for industrial applications Flange motor, double-sided rotor bearing, oil/air cooler. Fine screen filter, suction check valve, gas ballast valve, protective cover and oil separator mobile use equipped with Siemens Simatic Display Specifications: Elmo Rietschle Gardner Denver Product Oil-lubricated rotary vane vacuum pump V-Series V-VC 75 Operating hours approx. 6684 Power 2.2 kW 1,745 rpm Pump capacity 70/84 m³/h Pressure 0.5 mbar Item condition: used

Gardner Denver V-VC 75 Vacuum Pump Oil-flooded rotary vane vacuum pumps with IE2 motors Easy maintenance. Final partial pressure 0.1 mbar Suitable for industrial applications Flange motor, double-sided rotor bearing, oil/air cooler. Fine screen filter, suction check valve, gas ballast valve, protective cover and oil separator mobile use equipped with Siemens Simatic Display Specifications: Elmo Rietschle Gardner Denver Product Oil-lubricated rotary vane vacuum pump V-Series V-VC 75 Operating hours approx. 883 Power 2.2 kW 1,745 rpm Pump capacity 70/84 m³/h Pressure 0.5 mbar Item condition: used

The machine is in good general condition and is equipped with the following accessories. 1 set of racks with castors 1 set of bearing stands with prisms 1 piece test rotor Various spare parts Operating instructions with spare parts list Price on request

Inlet opening: approx. 500 x 700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor blades: 10 Drive: 110 kW

Technical data for the pallet rack traverse: Shelving system: Nedcon Type: NS Included in delivery are: 01x pallet rack traverse, new Material colour: RAL 2008 light rotor gun Box profile: 130 x 50 mm Truss type: CC1305015A Steel quality: 275 MPa Agraffe type: PR2-5HK90 Clear width: 3,600 mm load per pair of trusses 3,200 kg at the same. distributed load 02x safety pins, new Version: kompl. galvanized To secure the longitudinal members against unintentional lifting

Technical data for the pallet rack traverse: Shelving system: Nedcon Type: NS Included in delivery are: 01x pallet rack traverse, new Material colour: RAL 2008 light rotor gun Box profile: 130 x 50 mm Truss type: CC1305015A Steel quality: 275 MPa Agraffe type: PR2-5HK90 Clear width: 3,300 mm load per pair of trusses 3,500 kg at the same. distributed load 02x safety pins, new Version: kompl. galvanized To secure the longitudinal members against unintentional lifting

Inlet opening: approx. 1000 x 1700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor blades: 10 Drive: 110 kW

Key data: 1300 , 177 , 40

Arburg 470C 1300-350 with 40mm plasticising unit. The ‘C’ variant of machines from Arburg is one of our most popular requests (once refurbished). These machines were market leaders for quite some time and proved reliable and good value for money over the years. With a little refurbished magic from the team to bring them back to ‘almost new’, these machines now have a new lease of life. They might not be the most energy efficient, but they are by no means power hungry and when the low upfront cost is considered with low maintenance costs, it’s a very good value option. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cos ...

Bead Mill Manufacturer: Fryma Type: MS-12 Year of construction: 1992 No.: M15426 Pressure product space: 2.5 bar Pressure double jacket: 2.0 bar Power: 3.0 kW with control cabinet with speed-controlled hose pump speed-controlled rotor with temperature gauge (glass broken) with pressure gauge with double-acting mechanical seal LBH: 800 x 600 x 760 mm

Inlet: 1,440 x 900 mm Rotor diameter x width: 1,250 x 1,420 mm new wear lining

Catalog number 6726 TECHNICAL DATA - 280x300mm loading hopper inlet - outlet for shredded wood fi 310mm - rotor working width 340mm - 22kW main engine - number of knives 6 pcs - dimensions length / width / height 1300x1150x1680mm - weight 720 kg ADVANTAGES - very good condition - used chipper Net price: PLN 19900 Net price: EUR 4422 Net price, calculated at the rate of 4.50 PLN / EUR (with greater fluctuations in the rate, the price may change)

Builder: WILLIBALD Model: MINISHARK Engine: PERKINS 130 kW (175 HP) Data: L. 8.250 x W. 2.500 mm x H. 3.300 mm Year: 2015 Hourly Production: 35 m³/h Shredding System: 22 HAMMER Rotor Data: D. 700 mm Fuel Tank: 140 L Weight: 8.000 kg

Hazemag Impact Mill AP 4 complete with drive, spare rotor + spare parts. Capacity: approx. 150 T/h. Power requirement: 35 to 80 kW. Mouth width : 700 x 1000 mm. Weight: approx. 11000 kg

Kleemann Impact Mill Brand: Kleemann. Inlet opening: 1430 x 900mm Dim. Rotor: 1400 x 1000mm Incl.: electric motor 160 kW