ultra rotor used for sale

Inlet: 1080 x 1000mm Rotor: 1000 x 1060mm Weight: about 11.5 t. Interior armour renewed

Shredding plant / chipper / shredder for shredding wood waste - Waste wood waste - Pallets - Packaging material and waste of many kinds Make: VECOPLAN - MASCHINENBAU Type: VAZ 300/180 Silent and slow-running. Propulsion:132. Kw. Rotor width:1800.mm. Rotor diameter:420.mm.(solid steel.) Rotor speed:80-120 rpm Capacity: 1500-2000.kg/h.je by material and task. Tools-knives ( cutting crowns 80x80 mm ) Sieve: 30.mm. round hole reinforced design Hydraulic strainer and rear flap with lowerable counter knife Conveyor belt cut-out 1000.mm. Insertion: approx. 1800 x 3000.mm. Weight: approx. 18.500.Kg. Included: control cabinet system + hydraulic system + operating instructions + electrical circuit diagrams. Dealer price 34.500.00€ net ex location. The machine is in good general condition

Inlet opening: approx. 300 x 600 mm Rotor width: approx. 600 mm Rotor diameter: approx. 300 mm Stator knife: 2 Rotor blade: 4 x 2 Drive: 30 kW Feed opening: approx. 300 x 600 mm Rotor width: approx. 600 mm Rotor diameter: approx. 300 mm Stator knives: 2 Rotor knives: 4 x 2 Drive: 30 kW

Entrideting machine Bar Gar Bg9a min130mm/ max 900mm motor 30 kw Rotor on ball or raderlager, rotor with 5 or 6 Formwork knives, switchboard mi control panel

Continuous stuffer from the manufacturer SIA, consists of a hopper that receives a dough and by means of a rotor with stainless steel blades, with or without vacuum, pushes the dough at a graduated pressure towards the interior of a casing, bag, etc. Built entirely in stainless steel. AISI-304. High versatility. PRODUCTION CAPACITY 6.500Kg/h HOPPER CAPACITY 270 liters ELECTRICAL VOLTAGE 380 V Three-phase 50Hz, 9 KW 19 AMP VACUUM PUMP Vacuum pump 21m3/h. INCLUDES Various funnels (different calibers) + Disassembly tools OPERATING SYSTEM Through stainless steel rotary blades. Different production schedules, including portioner. With vacuum and filter to prevent the entry of the product to the vacuum pump.

Granulator Load area: 140x140 mm Overall size: 950x500x1300 mm Power: 2,5 kW Weight: 200 kg Technical data: • Designed for beside the press operation (injection and blow moulding) • 3 knives open rotor • Reversible hopper • Slow rotor speed (250 RPM) • Lateral end discs which turn with the rotor • Standard screen in stainless steel • Quick opening and easy cleaning Processes: • Injection • Blow moulding • Extrusion Designed for: • Small wastes from purgings and castings • Tubes and profiles with small diameter • Trimmings

WEINIG / GreCon Short Wood Finger-jointing Line Ultra TT Data of the system: • Wood inlet length (min. - max.) 150 - 1000 mm (1300 mm) • Reference timber inlet length at the finger-jointing line 400 mm • The length of the wood to be processed must be at least 25 percent longer than the width of the wood to be processed • Wood thickness (min. - max.) 20 - 80 mm • Reference wood thickness 28 mm • Wood width (min. - max.) 40 - 205 mm • Reference wood width 90 mm • Reference wood cross-section 28 mm x 90 mm • Wood outlet length (min. - max.) 3000 - 6100 mm • Reference wood outlet length 6100 mm • Tine profile (length) 10 – 11 mm • Max. wood cross-section for processing softwoods (with specified tine length) 100 cm² • Max. wood cross-section for processing hardwoods (with specified tine length) 80 cm² • Glue type PVAC • Species: Softwood / ...

Prallbrecher Prallmühle Steinbrecher Einwellenshredder used Manufacturer: HAZEMAG / KLEEMANNs Type: WMS 800/1 Rotor diameter: approx. 800 mm without a fallback mechanism Filling shaft approx. 800 x 600 mm Ejection shaft approx. 1200 x 800 mm Dimensions without motor: approx. 2600 x 2300 x 2300 mm The drive succeeds via V-belts and can be individually adapted to the requirements.

workpiece weight: 100 - 3.000 kg workpiece length: 5.000 mm diameter: 1.260 - 1.600 mm Control: CAP920 total power requirement: 11 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 20 Container m Mobile balancing system SCHENCK for use anywhere in the world The balancing system is permanently installed in a 20 open-top container. The container is equipped with everything you need for balancing • Lighting • Metal base plate 12,000 kg as a base plate for accuracy • Compressor for working air supply distributed in the container • Compressed air connections. • A circumferential power strip • A tool cabinet equipped with tools • A hydraulic lifting device for aligning the container from the outside • In addition to a tarpaulin for the roof, the container also comes with movable roof segments made of sheet metal. • The container has a central plug through whic ...

Granulator - Wanner D25.38 s Year of construction: 2011 Location: Lodz, Poland Slow-rotating granulator with gearbox, with cyclone and dust removal Power: 7.5 kW 2 stator blades, 18 rotor blades, the sieve - interchangeable Rotor and blade are cooled with water Hopper inlet: 430x380 mm Grinding chamber opening: 390x290 mm Automatic feeding of the regrind to the big bag It is very easy to clean the grinder, which is especially recommended if the color of the ground fabric is changed often All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request

CATALOG NUMBER 6114 TECHNICAL DATA - 800x1000mm loading hopper inlet - rotor working width 800mm - pump motor 0.75kW - 15kW main engine - number of knives 21 pcs - dimensions of the knives 30x30mm - 0.8x10mm sieve - pressure drawer - electric reverse - 2 × 1.1kW discharge augers - dimensions length / width / height 2460x1800x2250mm - weight 1660 kg - German production - reverse - pressure drawer - unpainted - very good condition - used chipper Net price: 69 900 PLN Net price: 16069 euros depending on the price, 4.35 euros (Prices may vary for greater fluctuations)

unused, new Kleenoil filter system for workshop use Type S6-103 Year of construction 2023 Execution: Mobile oil filter system Steel construction, powder-coated 6 ultra-fine filter units SDU-H8 incl. 6 filter elements SDFC with the option of use 1 x 6 or 2 x 3 Filtration capacity (average) 500 l/h (40 cSt) For oil quantities up to 10,000 l Self-priming gear pump Pre-filter unit with washable filter cartridge Automatic low-pressure shutdown Pressure gauge display Component protection IP55 Transfer function - oil pumping without filtration 6 m suction and return hose with quick couplings Starting viscosity: max. 1,000 cSt. Filtration viscosity: < 200 cSt.

Furnace 1200 temperature range 100 - 1200 Celsius inner dimensions 1x1x2m power 50kW PLC could be various size industrijskih peći INDUSTIJSKIH PECI NIKOTIRANJE CEMENTIRANJE TERMIČKA OBRADA ČELIKA KALJENJE INDUKCIONO PLAMENO ALATNIH I KONSTR. ČELIKA ŽARENJE MEKO NORMALIZACIONO STABILIZACIONO CNC obradni centri za struganje Završno precizno struganje Brušenje nakon termičke obrade, Zatvaranje tolerancija - lanci mjera, Kombinovani postupci struganja i glodanja, Dijelovi za automobilsku industriju i industriju mašina od čelika obojenih metalą CNC 3-osni obradni centri, Konvencionalno glodanje za pripremu i doradu, Kombinovano CNC struganje i glodanje, Zat varanje tolerancija - lanci mjera, PEĆI ZA TERMIČKU OBRADU ZAŠTITNE ATMOSFERE PEĆI ZA TERMIČKU OBRADU SA ZAŠTITBNOM ATMOSFEROM NITRIRANJE,CEMENTACIJA, POBOLJŠANJA, ŽARENJA, CARBONITRIRANJE NITROKARBURIRANJ ...

CLEARANCE of high-speed drawing line, for hot dogs and sausages cooked in cellulose or collagen casing. Manufacturer: HANDTMANN, model: FPVLH 242. The FPVLH 242 consists of the following functional modules: Module Support, Travel Unit, Suspension Unit and this all powered by a vacuum stuffer NOT INCLUDED. The FPVLH 242 is excellent for mono productions of cooked sausages and hot dogs in cellulose and collagen casing, and offers maximum yields of up to 3000 servings per minute. With integrated vane rotor The FPVLH 242 ensures cooked sausage products with maximum portioning precision and exact lengths thanks to the patented weight-compensated Handtmann vane rotor. Its impeccable condition. Equipment overhauled, rebuilt and warranted. OCCASION. NEGOTIABLE PRICE. Transport costs to be borne by the buyer.

Type: Ultrasonic welding machine #4711 Manufacturer: Telsonic #4709 Model: USP300+MPS-4+DHG2030 USP3000 vibration unit MPS4 controll unit DHG 2030 generator P1 pneumatic unit Frequency 20kHz Power 3000W Dimension : 850x700x2400mm Machine weight: 230 kg

table-size: 300 x 300 mm frequency: 20 kHz control: HS DIALOG 2012 control: active control connected load: 4,5 kW = ultrasonic welding machine - - price new 36.000,00 EUR - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Web guider ElGuider, DRB1402, Erhardt+Leimer, new -40% Special price ! We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price of a similar product is about € 4.300. If you have an UID number, we will gladly issue an invoice without VAT Top condition like a demonstration unit The part was removed from a new machine, which can be proven to have run only about 100 hours. ELGUIDER - DRB1402 Rotary frame system Profinet with rotary frame DR 1401 in compact version for the control of a running web, with digital position controller and brushless actuator, Control frame for D100 rollers, - Size: Size 2, - Nominal width NB: 250 mm, - transfer length LUE: 250 mm - Sensor: FX 46 ultrasonic sensor, - Incl. existing cables - Sensor adjustment: Manual, Standard, - F ...

Hobart Universal Dishwasher XXL Model: UXTL-11 Genius-X Fine Filter System Easy Clean Concept - Basket size: 1140 x 680 mm - Insertion height 850 mm - 3 programs with color display - Drain pump - Rotor X washing system - Dishwashing agent dosing - Clear-spuse agent dosing agent - DGUV V3 tested Dimensions: 1380 x 950 x 1980 mm, WxDxH Connection: 400V, 21 kW, 32A-CEE plug Used machine cleaned and tested More top bakery machines in stock!

Gallus R200 B02 10-color – Age: 2007  Manufacturer: Gallus Ferd. Rüesch AG Configuration:  10 x Letterpress Units  2x unwinder, 2 DW left, 3 DW left, 3 DW right, 2 DW left, K250  Year of construction: 2007 (extension 10 colours)  Rotastance 360° servo drive  Rotastanze 360° servo-drive (middle 6's block)  Rotor dryer servo-drive  IS UV system M25-8x1-R-HP-SLC, UCS 6  Chill-roller technology  2 Web Edge Controls  Softal corona system VS  Tecknek web cleaning  Sensotec register control system (LCD touch screen monitor)  K250 winder automatic Tech. Specifications: Colour: Gallus NCS blue  7 red blanket printing units left  3 units red blanket printing unit right  1 screen printing unit left  1 screen printing unit right  1 hot stamping unit incl. temperature control unit  All positions prepared for ...

The CIMAT CMT 30 V2 balancing machine was manufactured in 2015 in Poland. Bvcilkrj7m Basic technical data: - software: ROTOTEST - component weight: 0.2 to 30 kg - maximum rotor diameter: 400 mm - maximum rotor height: up to 200 mm - compressed air pressure: 0.6 MPa - balancing machine dimensions: 1200 x 1200 x 1500 mm - control panel dimensions: 600 x 600 x 1800 mm - weight: 500 kg

Rotor Diameter: 800 mm // Output Capacity: 1200 kg/h

Rotor Diameter: 1000 mm

Output Capacity: 500 kg/h // Rotor Diameter: 560 mm

Slip ring, slewing ring, rotary transmitter, slip ring rotor, slewing ring slip ring, column slip ring, slip ring transmitter -Comes from HUSS Rides manufacturer of leisure facilities -Slip ring: 38 x copper rings -Outer diameter: 300 mm

Ultrasonic insulator ATS US 2100 AB; good condition; serviced and tested at ATS Germany; Bandwidth 75mm; Frame 430x205mm; suitable for paper or foils. Ultra sonic banding machine ATS US 2100 AB; good condition; checked by the support of ATS Germany; band width 75mm; frame 430x205mm; used for paper or foil.

workpiece weight: 4 kg workpiece length: 200 mm dia. on complete length: 200 mm Control: Schenck-Lauer electrics - voltage/frequency: 400 / 50 V/Hz dimensions: 4,1 x 4,2 x 2,5 m connected load: 12 kVA flange diameter: 250 mm weight: 4,5 t Balancing machine for rotors - Turbocharger fuselage groups - hydraulic measuring station - Compensation station - Pulsation measuring table - Chip extraction - Measuring instrument CAB 950T - feeding device - Schenck/Lauer Control on Dase of Windows The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used agitated ball mill Hosokawa Alpine PV 800 Pulvis Scope of supply: Pulvis grinding system including gas distributor, feeding screw, flap valve, classifier mill Pulvis PV 800 with TTD 315 classifier head, mill motor 37kW, classifier motor 45kW, filter, flap valve, blower and switch cabinet. Technical details: Non Pressure Shock Resistant (NPSR), non ATEX, not suitable for inert operation. Normal steel with wear protection - ceramic (mill only) A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant W ...

Banding system ATS US 2000 AB Cornerline; good condition; serviced and tested by ATS customer service; bandwidth 30mm; frame size 360x160mm; Min. Product width 80mm, max.165mm; Max. Product length 270mm; Max. Produnkt height 110mm; Compressed air required. Ultra sonic banding machine ATS US 2000 AB Cornerline; good condition; cleaned and checked by the support of ATS Germany; band width 30mm; frame size 360x160mm; min. product width 80mm, max.165mm; max.product lenght 270mm; product hight 110mm; pressure air needed.

MICAFIL Winding Lathe Type WBD-5 -100/300 Winding, shrinking, turning lathe / Type V-B-V Max Rotor Diameter 1800 mm Max Carriage Length: 450 mm Tray diameter: 1200 mm

CATALOG NUMBER 6114 TECHNICAL DATA - 800x1000mm loading hopper inlet - rotor working width 800mm - pump motor 0.75kW - 15kW main engine - number of knives 21 pcs - dimensions of the knives 30x30mm - 0.8x10mm sieve - pressure drawer - electric reverse - 2 × 1.1kW discharge augers - dimensions length / width / height 2460x1800x2250mm - weight 1660 kg - German production - reverse - pressure drawer - unpainted - very good condition - used chipper Net price: 69 900 PLN Net price: 16,069 euros depending on the price, 4.35 euros (Prices may vary for greater fluctuations)

Plastic crusher, industrial shredder, cutting mills Wanner 20/20 E-SS for sale in very good condition. This slow-speed gear grinder is used next to an injection molding machine or in a separate room for grinding angles and middle parts. Due to the low speed, it is also suitable for grinding low-melting elastomers and sensitive engineering plastics. On the rotating rotor there are 6 knives. The crushing capacity of the grinder is approx. 60kg/h. The mill is equipped with a 4 kW engine.

The machine is in very good condition Control Unit: PLC with touch screen Feeding: Automatic Product can be filled: Liquid or cream, gel Filling Capacity: 10 ml to 500 ml Capacity: 700-1200 pieces per hour stainless chrome Tube closing system: Ultrasonic

Helme refrigerated centrifuge including rotor for 1.5/2 ml eppendorf. Condition like new in the sense that it will have approximately 30 hours of work. Production year 2017-2018.

Inlet opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knife: 3 Rotor blades: 5 Drive: 45 kW Feed opening: approx. 600 x 580 mm Rotor width: approx. 580mm Rotor diameter: approx. 450mm Stator knives: 3 Rotor knives: 5 Drive: 45 kW

working width: 4700 mm Number of rotors: 1 St Tine arms per rotor: 16 St The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sigma 6-16HS Heated Centrifuge in perfect working order and conservation. Accessories included: rotor, 500, 50 and 15mL adapters. 500mL jars. Table not included.

Thermo Fisher Scientific Ultra low temperature freezer Thermo Fisher Scientific Ultra low temperature freezers - 2 pcs Working temp.-150C, 193L capacity, made 2019 in good working condition.

The capacity declared by the manufacturer: 250-600 kg / h Adjustable speed range: 500-3800 rpm, Mobile device, Additional equipment included: conical sieves with a mesh of fi = 1mm, fi = 0.7mm and fi = 0.5mm Cleaner rotor seal, rotor shaft on which the chafer is mounted.

- Oil extraction unit KAISER, 100-400 l/min - Screening belt, belt width: 800 mm, length: 2,000 mm, SEW-Eurodrive 0.37 kW - Monopump NETZSCH NM045BT, YOC 2001, GETRIEBEBAU NORD Gear Motor - Rotor of progressing cavity pump - Peristaltic pump DEPA ELRO ME5 - Gate valve, length: 275 mm, Ø 200/80 mm (outside/inside) - Control cabinet - 2 x agitators - 2 x stainless steel pipe with branch (approx. 1 m long)

Rental system Hosokawa Alpine AS 100 Aeroplex, not for sale. The Hosokawa Alpine Aeroplex AS spiral jet mill is a simple jet mill without dynamic classifier (different to our Hosokawa Alpine AFG) that allows the ultrafine micronization with a final fineness of around 10 to 150µm of different products. Mainly dry non abrasive materials up to 3 Mohs hardness can be pulverized although some models allow wear protection inserts within the grinding chamber (pending availability). The micronizer design without rotating parts (thus no bearings or grease) makes this mill especially suitable for pharmaceutical and food applications, although it´s used as well on the chemicals industry for instance. The comminution takes place inside the grinding chamber where the product is accelerated by the compress gas injected through the grinding nozzles causing the different particles to collide with ...

Year 2000 CNC SIEMENS 840 D Longitudinal Traverse ( X Axis) 22.000 mm Cross Traverse (Y Axis) 1.500 mm Vertical Traverse (Z Axis) 3.000 mm Stoller Table 6000 X 2000 X 300 mm 2 Unid/ 2 Units Rapid Traverse X Axis 10.000 mm/min Rapid Traverse Y – Z Axis 15.000 mm/min Maximum Working Feed 5.000 mm/min Taper ISO 50 DIN 69871 AD 50 Turning Speeds 6.000 r.p.m. AutoIndex Head 45 º Head 360.000 Pos. Elbow 360.000 Pos. Main Motor Power 37 Kw. Nº Change Range 2 Ranges Automatic Tool Charger INCLUDED Tools at ATC 30 Coolant Through Tool 20 Bar INCLUDED Soluble Oil Tank with filter paper INCLUDED Head Coolant System + CF Box INCLUDED Longitudinal Chip Conveyor INCLUDED Operator?s Platformd with 2000 mm Vertical movement. INCLUDED Ready for Rotor Translating Table (Regulator + Wires) /INCLUDED Coolant System in Electrical Cabinet INCLUDED Machine Weight 68.000 Kg. Mach ...

Shredder | Cutting mill 18/45/ 7.5 kWt VGA for plastic 18/45 VGA Cutting mill for plastics, cable 7.5 KW, 80-140 kg/h. Model: VESPA 18/45 / 7.5 kWt VGA Throughput Kg/h: 80-140 Rotor diameter мм: 180 Rotor knife quantity/dimensions piece x mm: 6×225 Stator Knife Quantity/Dimensions Piece x mm: 4×225 Motor kW: 7.5 Weight Kg: 320 Capacity (cable) kg/h: up to 140 Capacity (plastic) kg/h: 80-120 Dimensions (mm) A 860 B-670 C-1480 D 1250 E 460 F 220

Scodix Ultra 202 Year 2019 Counter 230.000 copies 
Paper size Min: 29 x 42cm Paper Size Max: 54x78cm Printing size Max: 74x 50 cm Foil technology Digital in-line with Scodix PAS foil technology Foil roll width (min/max 50-500 mm Foil roll size Diameter:max 30 cm; Length:max 2,000 m; Core:77mm/3 in Max number of simultaneous rolls Up to 4 rolls Polymer layer thickness From 5 up to 250 microns Substrate weight 135-675 gsm/6-30 points Substrate thickness Up to 700 microns Foil film type Wide variety of industry standard hot/cold foil films Substrate Offset, Plastics, laminated and coated/uncoated substrates Resolution Up to 2540 x 450 DPI Variable Data Enhancement (VDE) PDF, optimized PDF, barcode system (optional) Scodix RSP™ Technology 4 CCD camera system, RSP™ (Rotate, Scale, Position) algorithm, automatic position ...

Machine for the production of pantyhose. Equipped with Lycra feeder Massardi or BTSR. Always in use. Can be sold with an extra fan + € 150.00. 4 cylinder, 4002 needles. For sale - 4 machines. The price is for one piece.

VESPA 50/80/45 kW VGA Cutting mill for plastics 45 KW, 500-800 kg/h. Insertion opening mm: 820×650 Rotor diameter mm: 500 Throughput kg/h: 500-800 Rotor blade quantity/mm: 6 x 400 Stator knife quantity/mm: 4 x 400 Engine KW: 45,0 Dimensions LxWxH mm: 2400x1700x3070 Weight kg: 4500 With material conveying blower 7.5 kW and BigBag filling station.

grinding range: 8 - 32 mm sharp cornered angle min./max.: 90 - 140 Grad connected load: 230 V weight of the machine ca.: 16 Kg dimensions of the machine ca.: 0,43 x 0,24 x 0,24 m Drill grinding machine: Additional station for grinding back the drilling cutting surface (clearance angle) 25tk. Collets ER 40 are included in the scope of delivery, these are also suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Hard metals with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Vibration-free running thanks to its heavy weight and rubber feet. Sharpening angle adjustable for all common twist drills. Package dimensions: 430 x 240 x 240mm. Weight 16kg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Screening machine | Vibrating Screening Machine Type ASM-300 New machine | Demonstration machine - Make: S&F GmbH - Type: ASM-300 - Design: TOP LINE - Screening capacity: approx. 35 - 40 m³/h (for wood chips and sawdust) - Screening area: 3.0 m² - Fractions: 3 pieces - Screen decks: 2 pieces - Drive power: 2.2 kW - Machine weight: approx. 1,900 kg - Machine colour: RAL 5002 Ultramarine Blue - Screen inserts freely selectable Suitable, among other things, for screening the following bulk materials: -Wood chips - Sawdust and sawdust -Biomass -Wood pellets -Charcoal - Reclaimed wood -Bark Vibrating screen | Wood chip sieve | Vibrating Screening Machine | Flat sieve | Vibrating screen | Roller classifier | Screening machine for wood chips Screening Machine | Oscillating Screen Type ASM-300 New machine | Demonstration machine - Make: S&F GmbH - Type: A ...

Rental Hosokawa Alpine UPZ 100 cryogenic system (LN2) by Alpine Rentals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX Suitable for cryogenic grinding with LN2 Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system with grinding tools of choice, small feeding hopper with a dosing channel, cooling screw to feed the LN2, LN2 container, filter and barrel to collect the fines. Includes an operating panel, switch cabinet and a vacuum cleaner. LN2 to be provided on-site This small size system with an universal mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. Suitable for the cryogenic grinding with liquid nit ...

50/80/45 kW VGA Cutting mill for plastics 45 KW, 500-800 kg/h. Insertion opening mm: 820×650 Rotor diameter mm: 500 Throughput kg/h: 500-800 Rotor blade quantity/mm: 6 x 400 Stator knife quantity/mm: 4 x 400 Engine KW: 45,0 Dimensions LxWxH mm: 2400x1700x3070 Weight kg: 4500 With material conveying blower 7.5 kW and BigBag filling station.

wheel diameter: 250 mm grinding wheel size: 250 x 25 x 20 mm turning speeds: 2850 U/min voltage: 400 V total power requirement: 2,0 kW weight of the machine ca.: 28 kg. dimensions of the machine ca.: 600 x 290 x 300 mm Furnishing: - Heavy design and high quality equipment - ideal for professional use - Ideal for matting, polishing - up to mirror-smooth surfaces of various materials - with the help of optionally available polishing discs and polishing pastes - Lockable ON-OFF switch according to IP54 with undervoltage release - Including motor with copper winding for a long service life - Standard with rubber feet for vibration-free work - Very smooth running thanks to balanced rotor with quality ball bearings - Elegant machine body made from high quality die-cast - Suitable for polishing metal, plastic and non-ferrous materials Scope of delivery: - Soft polishing pad - Hard polishing pad ...