134,310 used machines on RESALE, but how to find them? Machine Search
Damas Sigma 753 Grain cleaner. Total refurbished with new bearings. New brushes Sandblasted and painted. Comes with pulco, aspirator and valve
internal dimension: 550 x 730 x 400 mm 0: 185 l operating pressure: 5-8 bar weight: 50 kg dimensions: 0,7 x 0,6 x 1,35 m Specification: Large lockable flap. Comfortable gloves. Multifunctional cleaning sprayer. LED lighting. Air blower. Readable pressure gauge. Adjustable air pressure regulator. Removable cleaning grid. Removable filter for dirt. Removable water collection tray. Internal dimensions (LxWxH) 550 x 730 x 400 mm Interior volume 185 l Operating pressure 5-8 bar Weight 50kg Dimensions L x W x H 0.7 x 0.6 x 1.35 m Since this parts cleaner has a thermostat that sets the degreaser to 50 Degrees Celsius can heat up, it is advisable to use this degreasing cabin To be used in combination with the Eurol cold degreaser HF Plus. This degreaser has a higher flash point than the usual cold degreasers. The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...
SPECIFICATIONS: Power supply: Lithium battery Water tank: 30 l Width of the washing lane: 450 mm Speed: max. 3.5 km/h Dimensions: 96 x 55 x 122 cm Weight: 98 kg
Coolant cleaning system Manufacturer: Cyclomat Type: CCNR 14/350 Year of Make: 2016 For cleaning the abrasive emulsion Supply with max. approx. 250 L/min. at approx. 3.5 bar water Lifting into the filter system is done on site, Air- and foam-free. Max. temperature: 50°C Cleaning capacity: 350 L/min. Recirculation from clean tank to turbidity tank: 100-350 L/min. Machine supply max.: 250 L/min. Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Separation grain limit: approx. 5 μm Medium: Emulsion 3-6 % Operating Temperature: Ambient Temperature Solid particles: approx. 5.14 m3 Max. operating volume: approx. 4.58 m3 Min. operating volume: approx. 3.60 m3 Procedure: Fully automatic full-flow filtration Sludge discharge: Fully automatic, with a solid consistency The dirty liquid is supplied via on-site lifting sta ...
length: 1900 mm width: 810 mm height: 860 mm internal dimension: 1,5 x 0,74 x 0,78 Contents: 600 l The containers are chip bins ! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 1900 mm width: 810 mm height: 860 mm internal dimension: 1,5 x 0,74 x 0,78 Contents: 600 l The containers are chip bins ! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
P3 Foam Cleaning for Fillers and Rinsers Pumps and valves in a stainless steel control cabinet Attached control cabinet with Siemens S7 control
temperature: 80/130 °C 0: 100 kg filling capacity: 750 l basket dimensions: 670x480 mm number: 25 total power requirement: 43 kW weight of the machine ca.: 890 kg dimensions of the machine ca.: 185x190x150 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tank capacity: 775l, max. batch weight: 100kg, heating capacity: 26kW, max. temperature: 75°C, basket dimensions X/Y/Z: 660mm/480mm/338mm, fine filtration tank 1/2: 100µm/50µm. Machine dimensions X/Y/Z: approx. 1850mm/1400mm/1800mm, weight: approx. 950kg. The machine was overhauled in 2024 and has not been used since. Including basket rotation with swivel drive, automatic water filling and oil separation with coalescence separation unit and oil collection container. Documentation available. On-site inspection is possible.
Including vacuum pumpunit Auction-ID: A1-49790-1436
Stock number: SF056, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Clean air filter house, Design pressure: 16 bars, Test pressure: 26 bars, Connections: Ø 1, Manufacturer: Balston, Type: SA1/80, Other: Excl. filter
Cleaning machine / grinding machine for leather goods/belts / shoes with 2 speeds
New electric scrubber drier, floor cleaning machine KREMER type KR-FL50AByear of construction 2024Theoretical area output 2000 mª/ hWorking width 510 mmCleaning brush 510 mmBrush speed 175 rpm. Suction lip width 850 mmTank volume pure water: 50 litresTank volume dirty water: 50 litresNoise pollution 66 dBaClimbing capacity 2%Battery voltage 24 volts, 100 AH- battery charger 24 volts- battery 24 volts, 100 AH- one cleaning brush- two separate tanks- without drive drive, the device
A Zippel single-chamber cleaning system is available. Number of containers: 2, container volume: 300l, usable volume: 600l, usable height: 850mm. On-site inspection is possible.
used Stainless steel clad with heating, thermostat adjustable up to 90°C with lid External dimensions: 228x 85 H85 approx. 2000 litres with crane 230cm high with boom 130cm with motor functional but not cleaned
Including vacuum pumpunit Auction-ID: A1-49818-1436
Bottle washer Klinger type: Euro Class 24/1/844 Capacity: approx. 10,000 bph Steam-heated incl. PCL Siemens S7 suitable for bottles of 200 ml - 1,000 ml Bottle diameter: 50 - 90 mm Bottle height: 110 - 330 mm Currently set up for: - 330 ml longneck - 500 ml longneck - 330 ml swing-top bottle - 500 ml swing-top bottle Dimensions: Length: 10,000 mm Width: 395 mm Height: 285 mm Weight: approx. 20 t
Ruwac Industrial Vacuum Cleaner DS 2520 M-B1 with Extraction Arm 5.5KW
General: Year of construction 2002 Power 1.5 kW Weight 172 kg
Manufacturer: Festool Model: CTM 48 E LE EC/B22 Type: Industrial Vacuum Cleaner / Dust Extractor Tank volume: 48 litres Filter class: M Power: 1200 W Power supply: 230 V Condition: used Location: Bremen
A tunnel washing machine WB Busser for cans is available. Throughput capacity: 450-600 cans/hour, outlet dimensions X/Y/Z: approx. 520mm/300mm, conveying height: 1040mm, max. product dimensions X/Y: 375mm/180mm, conveying speed: 7m/min, max. throughput capacity: 3600/h. Machine dimensions X/Y/Z: approx. 4800mm/1750mm/2050mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible.
Manufacturer: OspreyFrank Model: iSteam iS18 Type: Dry Steam Cleaner Vapor pressure: 8 bar Steam temperature: approx. 180 °C Power: 3500 W Voltage: 230 V Condition: used
used
Type : R60 - 50 Capaciteit: 3500 kg zijverschuiving
A GM Gera bottle cleaning system is available. Throughput capacity with 1l PET bottles: 13000 bottles/h, bottle cells: 3240 pieces, cells per basket row: 18, cell pitch: 110mm, chain pitch: 169mm, total treatment time: approx. 15min, total immersion time: approx. 7.5min, housing material: stainless steel (SST). System dimensions X/Y/Z: approx. 8900mm/4200mm/3350mm, weight: approx. 23650kg, operating hours (09.2025): approx. 14300h. Documentation available. An on-site inspection is possible. Expected to be available from mid-March 2026.
Used parts cleaning system MOC 50 for operation with solvent or cold cleaner The machine is equipped with a lifting device with a rotation function, through which a basket is immersed in the degreasing medium using the immersion method, thus cleaning the parts. The heating function of the machine is defective, but this is irrelevant in the case of cold cleaner or solvent-containing medium. The system ran flawlessly until the end. Sale due to new acquisition.
A GMS stencil cleaner for the PCB industry is available. Drip pan external dimensions X/Y/Z: approx. 1420mm/1150mm/50mm, max. cleaning tank volume: 65l, max. stencil dimensions X/Y/Z: 755mm/755mm/40mm, extraction nozzle diameter: 100mm, air volume flow: 200m³/h. Machine dimensions X/Y/Z: approx. 1400mm/750mm/1100mm, weight: approx. 140kg. Documentation available. An on-site inspection is possible.
BATTERIJ : 20 kW - 80 V Capaciteit: 3500 kg bouwjaar: 2015 Zijverschuiving automatische vorken
maximum number of results exceeded
please refine your search
500 € 
