u used for sale

accuhead machine for containers up to 40 ltr. Extruder 90/24D. accuhead 6 ltr. Clamping force 350 kN. Cables partially renewed. Oil tank and pipes cleaned. New control system is prepared (B&R) and can be installed at short notice

Description: serial number 95490202 working dimensions X-Y-Z (mm) X-axis - 3000 mm Y-axis - 1250 mm Z-axis - 250 mm number of routing spindle 1 main motor power 9 KW spindle cooling - air tool changing system - ISO 30 number of consoles - 6 number of cups - 18 serial number: 95,490,202, Approx. Onsite Dimension. (l x w x h): 4,500 x 1,600 x 2,000 mm, weight approx.: 2,300 kg

SPECIFICATIES Merk Unisign Machine nr 4711 Type Uniport 4 CNC Merk Siemens CNC Type 840 D Bouwjaar 2001 Tafellengte 4.600 mm Tafelbreedte 1.500 mm X 4.700 mm Y 1.500 mm Z 400 mm Machine afmeting 6.000 x 3.450 x 3.150 mm Gewicht machine 19.000 kg

Description: Flat iron bending machine Flat irons 100 x 5 mm Square steel 16 x 16 mm Round steel 18 mm Angle steel 100 x 8 mm Dimensions 0.9 x 0.25 x 0.3 m Weight 0,025 t weight approx.: 25 kg, Approx. Onsite Dimension. (l x w x h): 900 x 250 x 300 mm

Description: Welding turntable with - Footswitch - tilt / swivel by hand - Speed continuously adjustable - 400 amp welding current transmission Table length 400 mm Table width 400 mm Table load 0.2 t Table diameter 400 mm Swivel range 90 degrees Speed 0.2 - 2 stepless rpm Table load 100 kg. vertical Total power requirement 220 kW Machine weight approx. 0.065 t Space required approx. 0.56 x 0.42 x 0.46 m Approx. Onsite Dimension. (l x w x h): 560 x 420 x 460 mm, weight approx.: 65 kg

Description: Welding table with - Foot switch - tilt / swivel by hand - Speed continuously adjustable - Welding current transfer 250 Amp Table diameter 450 mm Table load 300 Kg Swivel range 90 degrees Speed 0,2 - 2 stepless rpm Table load 300 kg vertical Total power requirement 220 kW Machine weight approx. 0.078 t Space requirement approx. 0.66 x 0.45 x 0.48 m Approx. Onsite Dimension. (l x w x h): 660 x 450 x 480 mm, weight approx.: 78 kg

Description: Welding turntable - footswitch - Tilt / swivel hand - Speed adjustable - 250 amperes welding current transmission Table diameter 300 mm Table load 50 Kg Swivel range 90 degrees Speed 1 - 12 out continuously U / min Table load 50 kg vertically Total power requirement 220 kW Machine weight about 0,036 t Space needs about 0.45 x 0.43 x 0.38 m Approx. Onsite Dimension. (l x w x h): 450 x 430 x 380 mm, weight approx.: 36 kg

Description: Welding turntable with - Footswitch - tilt / swivel by hand - Speed continuously adjustable - 250 amp welding current transmission - Hole in face plate 40mm. Table diameter 350 mm Table load 100 kg Swivel range 90 degrees Speed 0.2 - 2 stepless rpm Table load 50 kg. vertical Machine weight approx. 0.055 t Space required approx. 0.46 x 0.4 x 0.42 m weight approx.: 55 kg, Approx. Onsite Dimension. (l x w x h): 460 x 400 x 420 mm

Description: Scissor lift table with - Contact strip - Emergency stop switch - Remote control Table length 1300 mm Table width 800 mm Lifting height 1010 mm Load capacity in kg 2000 kg Height min. 190 mm Connection voltage 400 V Total power requirement 0.75 kW Lifting speed - upward empty 40 sec. Lifting speed - downwards empty 30 sec. Machine weight approx. 0.28 t Dimensions approx 1,3 x 0,8 x 0,4 m Approx. Onsite Dimension. (l x w x h): 1,300 x 800 x 400 mm, weight approx.: 280 kg

Description: Tank rotating device with Capacity 1000 Kg Workpiece diameter 20-800 mm Drum diameter 200 x 50 mm Feed 80-1600 mm / min Total power requirement 0,23 kW Dimensions about 600x500x500mm Approx. Onsite Dimension. (l x w x h): 600 x 500 x 500 mm, weight approx.: 70 kg

Description: Scissor lift table with - Contact strip - Emergency stop switch - Remote control Approx. Onsite Dimension. (l x w x h): 1,300 x 80 x 320 mm, weight approx.: 220 kg

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 3   X-axis travel: 4000 mm   Y-axis travel: 800 mm   Z-axis travel: 600 mm SPINDLE / HEAD   spindle revolutions (min): 10 /min   spindle revolutions (max): 6000 /min   tool fixture: ISO SK 50   drive power: 26 kW TOOL MAGAZINE   number of positions: 128 ELECTRICAL SPECIFICATIONS   mains power supply: 83 kVA   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 9500 mm   total height: 4500 mm   total weight approx.: 25000 kg ATTACHMENTS   angular milling head: yes   central lubrication system: yes   chip conveyor: yes   coolant unit ...

Dosing Machine Unifiller Universal 1000i Year of construction: 2014 Speed and portion control Stainless steel construction Easy product change Up to 120 cycles per minute depending on dispensing volume Servings from 9ml to 1064ml Hopper size: 52 l Even portioning of soft pieces possible

Offer about 40 TRANSPORT Grain wagons TYPE Uagps Pictures can be sent immediately. TECHNICAL DATA Gauge 1435 mm Loading gauge UIC Length between buffers 14840 mm Length of the body 13600 mm Height of the wagon from the rail 4053 mm Wheel base of the wagon 9800 mm Tare of wagon 23.3 t Y25 Bogie type - Y25 Bogie wheel base 1800 m Maximum load 56.7 t Load capacity 80 m3 Brake type - KE-2c-AL-SL Maximum speed 100 km/h Number of discharging gates 3 Aperture of discharging gates 800x770 mm Aperture of loading gates 508x10088 mm All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are ap ...

Ladies and gentlemen, Offer: TRANSPORT Grain wagons TYPE Uagps For rent All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire transport process is carried out at the buyer's own expense and at the buyer's own expense. We cannot be liable for personal injury and damage to property in the case of dismantling by the buyer in this context. Place  ...

Very good condition, like new. We plan and build the whole plant exactly for your needs. Are you looking for something else? Write us below!

for crushing fruit and vegetable tins made of plastic and cardboard, Packing material dimensions max W 450 x max H 450 mm L unlimited with 1 discharge conveyor belt, B=500 mm with 1 big-bag holding device with extractor belt

UNION Model: BFT 90/3 Manufacturer: UNION - Germany Model: BFT 90/3 Year of manufacture: 1982 Condition: very good, complete, no broken or missing parts Technical details: Spindle diameter: 90 mm Spindle taper: Morse'a 5 Working surface: 1400 x 1250 mm X axis travel: 1600 mm Y axis travel: 1250 mm Z axis travel: 1475 mm W axis travel: 710 mm Max. load on table: 2500 kg Installed power: 23 kW Machine weight: 9300 kg

CNC Boring Machine Table Type UNION Model: BFT 110 Manufacturer: UNION - Germany Model: BFT 110 Condition: very good, complete, no missing or broken parts CNC Control: HEIDENHAIN 150 Technical details: Spindle diameter: 110 mm Spindle taper: ISO 50 Table size: 1400 x 1600 mm X axis travel: 1985 mm Y axis travel: 1620 mm Z axis travel: 1960 mm W axis travel: 710 mm U axis travel: 250 mm

Stackable container Manufacturer GEMP and UDE inside polished Pharma Manhole diameter 450 mm Drain valve DN 80 Weight: 300 kg Number of pieces: 8 pieces available

Manufacturer: UNION - Gemany Model: BFT 130 / 5 Condition: very good New in.: 1978 / 2000 , the machine was completely modernized for Company ALSTOM Control: conventional with Heidenhain Linear readings in 3 axes Technical details: Spindle diameter: 130 mm Spindle speed: 4.5 - 900 rpm Spindle cones: MORSE 5 ( the price of the machine will deliver free of charge adapter for ISO 50 ) X axis: 1600 mm Y axis: 1600 mm Z axis: 2500 mm W axis: 1000 mm Table: 1600 x 1400 mm Table Rotation: 360 Charging the table: 8000 kg Speed: 4.5 to 180 rpm Power range: 0.63 to 2000 mm / min Fast forward: 2 m / min Total required power: 35 kW Approximate Weight: 47000 kg EQUIPMENT: Heidenhain readings line in three axes, flat disc

working width 600 mm Still in operation: Yes Available: sofort

Cardridge filter single, 1 x with TI Max. Operating pressure: 10 bar Max. Operating temperature:-25 / + 150 ° C Content: 9.3 L Price/piece Negotiable

Tip height: workpiece or grinding diameter 500 mm centre distance: approx. 2000 mm maximum workpiece weight: 1200 kg wheel dimensions: 600 Ø x 300 mm wheel speeds: 965 RPM elect. Supply: 380 V, approx. 15 kW space: 2300 x 9000 x 2000 mm weight: 13000 kg

Spindle speed min: 9,000 Umd.min Max: 15.000 Umd.min Tip height min: 230 mm Max: 510 mm Spindle stroke: 210 mm Horiz. Table large: 700 x 1000 mm Table stroke: 1,800 mm Equipped with: - feed table - feed Hor. Grinding movement - coolant equipment - protection doors table

various types of waelz bearings

High pressure - piston pump Flow water pump Manufacturer: UDOR Type: GAMMA 162 TS 1C. Detailed information on the manufacturers page, see pictures. Condition: Used, fully functional Scope of delivery: see the pictures.

UHDE adjustable Feeder, vibrating. Lxw = 1200x600mm Capaciteit 80 m3/h Adjustable from 0% to 100% With magnetic vibrator UHDE MA220 380Volt 16Amp 50 Hz IP54 And new thyristor control.

UHDE adjustable, vibrating feeder Lxw = 1200x1000mm Capaciteit 110 m3/h Adjustable from 0% to 100% With magnetic vibrator MA 220 380Volt 13Amp 50 Hz And new thyristor control.

adjustable, vibrating feeder. Lxw = 1500x800mm Capaciteit 100 m3/h Adjustable from 0% to 100% With magnetic vibrator MA 220, MVE50, M60/130, MV 100/50 And new thyristor control.

Uhlmann C 100 horizontal cartoning machine -fully automatic blister Strip packaging and simultaneous feeding of leaflets -Max power 100 FS / min Format: L = 70 x 150 mm B = 30 x 100 mm H = 15 x 85 mm Accessories: -GUK leaflet folding apparatus 4 Pocket fold -Laetus Argus 6012 control unit for prospectus leaflets and folding box code -Luminizenskontrolle, presence control for leaflet in folded box -Switching to blister double stack -prolonged discharge conveyors for labelling area -Stamping station -Prospectus before insertion -Vacuum pump -4 point pad blister tray Overtaken by 2015

Uhlmann C 100 modified fully automatic blister Strip packaging and simultaneous feeding of leaflets 2016 - horizontal cartoning machine -Max power 100 FS / min Format: L = 70 x 150 mm B = 30 x 100 mm H = 15 x 85 mm New hardware and software PLC Mitsubishi control and 8 inch color touch panel Accessories: -GUK leaflet folding apparatus 4 Pocket fold -Cognex 1 d barcode and 2D matrix code reading system for prospectus leaflets and folding box code -Luminizenskontrolle, presence control for leaflet in folded box -Stamping station -Prospectus before insertion -Vacuum pump

Accessories: -Fixed and revolving bezel -Rapid steel holder type B Turning diameter: 225 mm top width 1000 mm Spindle bore 42 mm Spindle speeds 35 1500 rpm.

The Cartoner C 2205 belong to the continuous cartoners for the exible packaging of small and medium sized batches. Convincing attributes include the GMP and pharmaceutically compliant cantilever design with V2A stainless steel lining of the inner surfaces, the modular structure for subsequent upgrading of separate stations, as well as the consistent separation of the drive elements and operating assemblies. Thanks to the patented carton feeders TwinStar and TriStar, the cartoner offer uniform top quality and productivity – not only under ideal production conditions but also when cartons of critical quality are processed. The 5 pitch Cartoner C 2205 is designed for a maximum output of 250 cartons/minute with an option of up to 300 cartons/minute. The machine packages blisters, ampoules . Technical details : Max Output 250 cartons per minute Pitch 5” Max carton size (AxBXH) 100 x 90 x  ...

Uhlmann C2504 continuous motion cartoner, carton size range min. 30x15x65 mm (AxBxH), max. 80x90x155 mm (AxBxH) Blister/tray size range min. 30x3.5x60 mm (LxWxH), max. 75x12x150 mm (LxWxH), suitable for blister count from 1 - 12 blisters per carton, Leaflet/Booklet feeder (leaflets/booklets are automatically taken from their carton/trays and placed into the infeed system), the machine is also prepared to accept a GUK leaflet folder and feeder. Includes Wolke m600 advanced inkjet printer for variable data and codes, set up for reverse tuck cartons with Nordson PROblue 4 hot melt glue system for tamper evidence. The cartons discharge though a Pago Pagomat 6/2 labeller for top labelling (vignette/bollino) Electrics 400 V/230 V/50 Hz, 20 A, connected load 10kW Compressed air 6-10 bar Machine footprint ca. 7289 x 2041 mm (LxW) Height ca. 2254 mm Machine nett weight ca. 8000 kg Output u ...

Complete gas measuring station / gas detector device, including Dräger Polytron 2 IR Ex 334 etc. used Manufacturer: Dräger Type: Polytron 2 IR Ex 334 Condition: Used - top condition Price: The total price of the complete system is only 50% compared to the sum of the usual market prices of all assembled used parts. The complete gas measuring device is mounted on a mounting plate of a control cabinet and consists of: - Mounting plate 110 x 170 cm - Air suction pump - Gas measuring device Dräger Polytron 2 IR Ex 334 - Brooks variable area flow meter 1355 / D1D4A1Z5BA00 - Switching amplifier Pepperl u Fuchs KFD2-SR2-Ex1.W - 2 Pepperl u Fuchs KFD2-STC4-EX2 transmitter power supplies The air is sucked in by the pump and fed into the gas detector and measured. Function guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. Since we  ...

Qty. 1 Second-hand recoiler Mfc.: United Type: Q610 mm Built: 1958 Model: Reversing Coiler right to left Capacity: Max. 45 ton

Flute laminating machine CA1300 Side register heel. The bottom feed stack can be adjusted for suction intensity from the touch screen, including an automatic cleaning system. The input pile has a non-stop system Monitoring by PLC with alarm in case of power supply error. Automatic gluing system that regulates not only the flow but also the recirculation. Features: · Max sheet size: 1300 X 1250 mm · Min sheet size: 400 X 400 mm · Thickness of the upper sheet: 175-600gsm / 145 - 450gsm Kraft · Bottom sheet thickness: Four-ply corrugated paper: A/B/C/E/F - Grey cardboard · Max speed: 7000 sheets per hour · Gluing accuracy: ± 1 mm · Weight: 5000 kg · Dimensions: 11500 X 2000 X 2400 mm · Electric power: 10 Kw / 380V

Die Cutting Machine Unitec T1060 Die Cutting Machine Unitec T1060 The T1060 automatic machine with or whithout stripping is used to diecutting and creasing paper, cardboard and corrugated and operations for cardboard boxes, paper labels and especially for delicate printing jobs such as cigarette packages, wine, gifts and cosmetics, etc. This machine works automatically throughout its process, with a user-friendly interface to control the cutting speed, number of sheets cut, total operating hours and its working status, as well as to dynamically control the PLC inputs and outputs, and malfunctions to facilitate operation control and troubleshooting. In addition, the machine also features self-testing (e.g., double sheets, missing sheets, accumulated sheets, or fallen sheet detection) and continuous process sampling, while providing you with a solid cutting and accuracy registr ...

in cassette

Article number: KB-1000 Brand: URB Model: NU2308E Year of constr.: Unused Stucco number in stock: approximately 4250 (2125 package x 2 pcs) Weight (kg) ca: 4080 NET / 4235 large Manufactured in: Romania Ã? diameter (mm): 40mm inside / 90mm outside Comments: Unused original packed bearings Price per kg (ex VAT): € 2.50

800 MT extrusion press 1. container size 127mm diam x 560mm lenght 2. capacity: extrusion: 800t/1000t extrusion (low tonnage) at 210kg/cm: 697M Ton Main ram forward at 210 kg/cm: 112 M Ton Main ram return at 210 kg/cm: 63 M Ton Contianer seal at 210 kg/cm: 69 M Ton Contianer open at 210 kg/cm: 94 M Ton Piercing at 210 kg/cm: 102 M Ton Mandrel return at 210 kg/cm: 63 M Ton Die slode at 210 kg/cm: 12 M Ton Stroke Main ram: 1320 mm Container: 250 mm Speed 38.0mm/sec 44.0mm/sec More information on request

Uraca PÜV 8/200 Safety valve, bypass valve, overflow valve (pneumatic and silicone-free) similar but no Hammelmann, Woma, Kamat Ab. Operating overpressure: 50-200 bar Mpf. Flow rate: 10-125 l/min. Dimensions HxWxD: 260x113x113 mm Weight: 10.9 kg with MADER PEU-063-0010-I-P-M Built: 2012 (unused) VE water: Suitable for operation with demineralized water. Electro-pneumatic control: Takes over the switching command and the pressure adjustment of the valve. Slit seal: Serves the exact reproducibility of the response pressure. For more technical data, see data sheet. Keeps the operating pressure constant regardless of the nozzle assembly. Suitable for long-term overflow operation. Excellent dynamic behavior with rapid flow changes. Special features: Very high responsiveness, high response dynamics, cone can be used on two sides.

We offer you 10 new safety pins for purchase. - incl. shipping throughout Germany - Included are: 10x Locking pins, new Material color: complete. galvanized Usage: Universally applicable Head diameter: 9.74 mm Pin diameter: 4.90 mm Weight: 0.007 Kg / Pcs. To secure the longitudinal beams against unintentional lifting Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

We offer 10 new safety pins for purchase. - incl. shipping throughout Germany - Included are: 10x Locking pins, new Material color: complete. galvanized Usage: Universally applicable Head diameter: 17.70 mm Pin diameter: 7.86 mm Weight: 0.030 Kg / pcs. To secure the longitudinal beams Against unintentional lifting Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

Welding machine u TIG 200 DC Machine is fully functional. Machine is in good condition. We love to hear from you.

Uhlmann C 100 horizontal cartoning machine - Fully automatic bottle packaging and simultaneous feeding of    leaflets - Max. Power 100 FS / min - Bottle length max. 150 mm Format: L = 70 x 130 mm B = 30 x 100 mm H = 15 x 85 mm New hardware and software PLC Mitsubishi control and 8 inch color touch panel mechanically overhauled Optional: - GUK folder folder 4 fold folding - Cognex 1D barcode and 2D matrix codes reading system for brochure leaflets    and carton code - Luminance control, presence check for leaflets in carton - embossing station - brochure feed - Vacuum pump / Venturi nozzle