u used for sale

We offer, in its current state, from the location Fruit juice concentrate plant Was operated for juices from apple, sour cherry Manufacturer: Unipektin Still installed, ready for operation, in well-maintained, maintained condition Year of Manufacture: 1990 Type: Falling Film Evaporator Number of levels: 5 Water evaporation per hour: 9 Including aroma column With pre-evaporator Subject to prior sale

Mixer Tiltable 300 litres Without vacuum

: . max. swing diameter: 350 mm centre distance: 1000 mm : 1980 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical details drive: - Drive motor: Yanmar L100 Electric - Starter: E-Start - Fuel type: Diesel - Fuel tank capacity: 24 litres - Runtime at 100% load: 12.37 h - Fuel consumption at 75% load: 1.45 l/h - Oil tank capacity: 1.6 litres - Sound power level (Lw): >97 dB(A) - Power factor: 0.9 Cos ɸ Technical details Power generator: - Type: Synchronous - Nominal voltage: 230 - Apparent power at LTP: 5.9 kVA - Active power at LTP: 5.3 kW - Apparent power at COP: 4.8 kVA - Active power at COP: 4.4 kW - Generator protection class: IP 23 - Sockets: 1 x Schuko 230V 16A IP54, 1 x 2P+T CEE 230V 16A IP44, 1 x 2P+T CEE 230V 32A IP44 - Protection class of sockets: IP 44 / IP 54 - Insulation monitoring - Thermal circuit breaker - Oil monitoring - Digital display for voltmeter and hour meter (LTP = time-limited generator power (max. power of the generator within 500 h/yea ...

Stock# U2410-1 Used stainless steel cutter/mill by Urschel Laboratories (USA) Comitrol Processor model 1700. Machine is designed for size reduction of free-flowing, dry and semi-dry, products and is equipped with microcut head. Urschel Comitrol Processor 1700 is able to work on three types of heads - slicing head, cutting head or microcut head. Machine is driven by 22,3 kW, 2955 rpm, 380 V, 50 Hz electric motor. Cutting chamber is sealed and deters escape of dust, vapor and liquid. Includes switchboard and control panel. Dimensions are approximately 1300 mm lenght x 900 mm wide x 1800 mm high, weight approx 500 kg.

THERMOFORMER, ULMA, TYPE: TF-OPTIMA Technical description: Format: (x4) 114 x 159 mm Power supply: 380-440 V/50-60 Hz Power : 30 kW Dimensions: 6600 x 1100 x 2050 mm

SLICING-CUTTING AND DICING MACHINE, URSCHEL, TIPO RA-A Technical description: It works with meat and vegetables. Serial number: 1027 Material: Stainless steel Power supply: 380/440V - 50/60Hz Dimensions: 1000 x 930 x 1590 mm Includes spare parts kit Slice thickness: 1/16 a 3/8 inch. (1,6 a 9,5 mm) Circular blade cuts: 1/8 a 1 inch. (3,2 a 25,4 mm) Cross cut blades: 0,05 a 3 pulg (1,3 a 76,2 mm) The RA-A model produces a wide range of diced and shredded cuts of a variety of products, such as fruits, vegetables, seasonings, nuts, and processed meats. Maximum product inlet size is 3-1 / 2 in. (88.9 mm) in any dimension. The RA-A offers continuous operation for uninterrupted production and a simplified design for easy cleaning and maintenance.

Key data: 3000 , 1050 , 6000

Free transport to Austria, Germany, Slovakia, Poland, Czech Republic, Romania, Slovenia, Northern Italy, Racking system. Frame 1050 mm x 6000 mm , 80 pieces Beam 2700 mm , 384 pieces Load capacity per pallet: 1000 kg Frame in galvanized Beam in orange Frame assembled Item location: Hungary Contact by e-mail. ustor@ustor.hu Ustor Sytem Kft. is more than 20 years old. More than 1000 customers.

material width: 1650 mm material thickness: 2,00 mm no. of straightening rolls: 23 sheet thickness - min.: 0,50 mm diam. of the rolls ca.: 53,60 mm straight. rolls-needle bearings: ja / yes between stands ca.: 1750 mm barrel length ca.: 1820 mm straight. speed ca.: m/ min total power requirement: 58 kW weight of the machine ca.: 19,60 t dimensions of the machine ca.: 6,00 x 3,00 x 2,90 m Number - supports 14 (7 x above/7 x below) with support rollers Number - support rollers 174 ( 84 x above / 91 x below) Support roller dia. approx. 112mm Drive power - main drive 55 kW Motorized height adjustment Electromotive tipping device Crowning (support adjustment (below) mechanical/manual) and individually deliverable 1 set of straightening rollers (replacement rollers) diam. 53.68mm Central grease lubrication of the straightening rollers bearing rails Circulating oil lubrication of gears and card ...

Used foil bottler with a capacity of 0.25 - 1 L Unipak, model ASG-3, PLC control, operational, production in the 90s. Technical data: performance -for a bag 1 / 4L 40 / min, 600 L / h -for a bag 1 / 2L 35 / min, 1060 L / h -for a 1L bag 30 / min, 1800 L / h bag sizes -width standard 140 mm, special 110-180 mm -length 60-300 mm electropneumatic control -pressure 0.6-0.8 MPa - demand 20 m3 / h 220V 50 Hz power supply - 1500W power dimensions 880x900x1950 mm -weight 360 kg 2 pieces available.

ORDER NO. 6955 TECHNICAL SPECIFICATIONS - loading hopper inlet L x W 1070x710mm - outlet for shredded wood fi 200mm - rotor working width 700mm - main engine 18,5kW - pump motor 1,5kW - number of knives 21pcs - knife size 35x35mm - sieve 50mm - pressure drawer - electric autorewers - dimensions length / width / height 1700x1300x1640mm - weight 1780kg ADVANTAGES – German production – autorewers – pressure drawer – very good condition – used chipper Net price: 67900 PLN Net price: 15089 EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

Boring mill turntable, used Boring table, used Typ/ type: TI 2 Manufacturer/ make : UNION Year of construction: 1984 Table size: 1800 x 2000 mm ; > 360° Fahrweg/ way : 1250 mm Feed speed: 0.5 to 1600 mm/min Tischbelastung/ table load: 15000 kp Gesamtlänge/ total length: 3500 mm Gesamtbreite/ total width: 2250 mm Weight/ weight: 7 t Feed motor: 6 kW

Cartoner for closing blister in corresponding boxes. Machine incl. GUK-leaflet folder, unit for booklet feeding system etc. Machine is in line with the blister machine, type UPS 1040.

weight max.: 2,2 t workpiece diameter: 101 - 1524 mm feed speeds infinitely variable: 0 - 3600 mm/min gear diameter: 254 mm gear width: 76 mm total power requirement: 0,5 kW weight of the machine ca.: 0,245 t dimensions of the machine ca.: 1,02 x 0,82 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5,0 t workpiece diameter: 303 x 2438 mm feed speeds infinitely variable: 0 - 1745 mm/min gear diameter: 305 mm gear width: 100 mm total power requirement: 0,5 kW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,5 x 1,05 x 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year: 2007 - technically efficient, ready to work (after full service) - 3-spindle (high-speed motors) - possibility of setting for various profiles (frame / sash) - pneumatic profile clamping

PLC – controlled universal thread chasing machine suitable for all external and internal threads, as well as for peeling operations on rods and shafts (with peeling heads of different sizes), with 7" color touch screen. External and internal threads from M10 to M60 can be cut with the machine on all rotationally symmetrical workpieces such as pipes, bushings, shafts and reinforcing steel rods (taped external threads, drilled internal threads or rolled external threads with rolling heads). All thread types - male and female - metric ISO thread - Whitworth thread - trapezoidal thread - pipe thread - round thread - saw thread - UNC/UNF - and other USA threads etc. Strehlkopf speeds infinitely variable from 25 to 300 rpm Hollow spindle bore Ø 64 mm Maximum thread length 300 mm in one clamping (optional up to 600 mm length) The strehlkopf can also be used to peel wave-shaped  ...

Ulma Etna 380 Hitec, fully overhauled, in excelent condition. Manual with spare parts list and drwaings: Available Electrical schematics : Available Final inspection by ULMA. 400 V 50HZ 7Amp

equipped with 2 sealing tools for shell format (1): 1.6 (sixfold, vacuum and gas) rectangular – corners rounded. Inside dimensions: each tray 177 x 177 mm (W/L) for tray format (2): 1.7 (sevenfold, vacuum and gas) oval, inner dimensions per tray 90 x 140 mm (W/L) Output: 16 to 21 cycles/minute further shell formats can be retrofitted.

Type HFFS Output: up to 100 packs per minute Bag length variable: min. 125 mm to max. 625 mm Product length: min. 90 mm to max. 500 mm Product width: min. 10 mm to max. 150 mm Product height: min. 5 mm to max. 150 mm equipped with print mark control

Spindle diameter: 110 mm Cross X: 2500 mm Vertical Y: 2000 mm Table length: 1600 mm Table width: 1250 mm Positions ATC: 60   Number of pallets: 0   CNC Brand: Heidenhain Spindle SK-50 with 2000 Nm torq 60 Position Chian ATC ( Optional toling package) Backlash free ball screws in all linear axes with absolute valvue High pressure coolant and paper filtration 40 bar Fully enclosre housing guarding area Chip conveyor X - Travel:              2500mm Y - Travel:              2000mm Z - Travel:              1500mm W - Travel:              550mm Table Length:            1600mm Table Width:             1250mm Table load:              6000 S ...

Adjustable jaw from 90 to 45 degrees, High: 1210 mm, Long: 1280 mm, Width: 710 mm, Weight: 410 Kg, Voltage: 220/380 V, Total power: 2.5 Cv, Ø max. cut: 260 mm, Blade length: 450 x 38 mm (18 ), Specification: Hydraulics

Solvent-base & water-base combi laminating machine Max. coating width 1.100 mm Mechanical speed 450 m/1' Working speed up to 400 m/1' Roll diameter of the main unwinder 1.000 mm Roll diameter of the secondary unwinder 1.000 mm Reel diameter of the rewinder 1.000 mm Inner diameter of the main roller cores 152 mm Inner diameter of the secondary cores 152 mm Inner diameter of reel cores 152 mm Max. reel weight of the main reel 1.200 kg Max. roll weight of secondary unwinder 1.200 kg Max. reel weight of the rewinder 1.200 kg Tape tension range main unwinder 2 – 40 kg Tape tension range secondary unwinder 2 – 40 kg Tape tension range of the rewinder 2 – 40 kg Max. temperature in the dryer at a room temperature of 20°C 120°C Solventless lamination with one-component adhesive trolley cart with 4 solventl ...

TIG hose package, welding torch, hand welding torch, TIG torch -with torch body -Length: 4 m -Tuchel connector: 3-pin -Water: chilled -Number: 2x hose packages available -Price: per piece -Weight: 2.4 kg

Flame cutting pliers, electrode pliers, hose package -Length: 3 m -Price: per piece -Number: 6x available -Weight: 3.5 kg/piece

Cooling capacit: 276 kW (10/15 - 35°C) Year of manufacture: 2013 Options: Hydromodul, Free cooling Hydraulic module: 2 pcs. pump, 500 liters expansion tank. Refrigerant circuit: 2 pcs. Number of fans: 4 pcs. Type of refrigerant: R407С Compressors: 4 pcs. Danfoss (scroll) Heat exchanger: Shell-and-tube Dimensions: 3,6 x 2,26 x 2,3 m. Weight: 3 147 kg. Working hours: 28300 h. Condition: Excellent Product quantity: 1 pcs.

Gear motor with brake SEW K37 DT71D/BMG ( K37DT71D/BMG ) 0,37 kW 46 rpm 230 / 400 V shaft diameter: Ø 25 mm New ! Dimensions: 470 x 200 x 165 mm

Gear motor with brake SEW-USOCOME SF37 DT71D2/BMG/HR ( SF37DT71D2/BMG/HR ) 0,55 kW 88 rpm 220 - 380 V 50 / 60 Hz shaft diameter: Ø 20 mm Dimensions: 410 x 180 x 200 mm

Gear motor with brake SEW-USOCOME Type: R40DT71D4/BMG/HR 0.37 kW 98 rpm 230/400 V shaft diameter: Ø 25 mm New ! Dimensions: 470 x 200 x 190 mm

Gear motor SEW-USOCOME R40 LP71 DT71D4 ( R40LP71DT71D4 ) 0.37 kW 59 rpm 230/400 V shaft diameter: Ø 25 mm New ! Dimensions: 500 x 200 x 180 mm

Gear motor with brake UNELEC Type: AT 90 L63 ( AT90L63 ) 1.1 kW 28.2 rpm i 30 220 / 380 V New ! IP 54

Gear motor SEW-USOCOME RF40DT71C4 0.25 kW 35 rpm 220-380 V protection class: IP: 55 shaft diameter: Ø 25 mm used, tested ! Dimensions: 430 x 170 x 190 mm

Gear motor with brake SEW-USOCOME DFT100LS4BMG/HR/TF/VS 2.2 kW 100 rpm i 14.5 230-400 V New ! Protection class: IP 55 shaft diameter: Ø40 mm Dimensions: 950 x 27 x 27 mm

Gear motor SEW-USOCOME R63 LP90 DT90L4BMG/HR ( R63LP90DT90L4BMG/HR ) 1.5 kW 61 rpm 230 / 400 V shaft diameter : Ø 30 mm Dimensions: 740 x 200 x 245 mm

Gear motor with brake SEW-USOCOME DFT90L8/4/BMG/HR at 0,0,44 kW/ 0.88 kW depending on clamping 25/ 12.5 rpm i 55.97 230 V IP 55 shaft diameter: Ø45 mm Dimensions: 720 x 260 x 230 mm

SEW-USOCOME Type: S72 LP100 ( S72LP100 ) 4 kW 32 rpm 220/ 380 V 50 Hz IP 55 Dimensions: 94 x 29 x 32 cm shaft diameter: 45 mm

SEW-USOCOME Type: KF 76 LP112 ( KF76LP112 ) Power: 4 kW Speed: 121 rpm Voltage: 230/ 400 Frequency: 50 Hz Ingress protection: IP 55 Dimensions: 92 x 33 x 31 New ! shaft diameter: 45 mm

SEW-USOCOME Type: KAF 76-LP1325/ H ( KAF76-LP1325/H ) Performance; 4.4 kW Speed: 85 rpm Voltage: 380 V Frequency: 50 Hz protection class: IP 54 Dimensions: 104 x 38 x 36 cm shaft diameter: 50 mm

SEW-USOCOME Type: S82DT 100L4/2BM/HR ( S82DT100L4/2BM/HR ) Power: 1.8 kW Speed: 19 rpm Voltage: 220/380 V Frequency: 50 Hz Protection class: IP 54 Dimensions:75x54x42 cm shaft diameter: 60 mm

three-phase electric motor SEW DT90S4BM ,1 kW 400 rpm 220/ 380 V IP55 Design: B3, with base shaft diameter: Ø 24 mm Dimensions: 420 x 260 x 190 mm

Three-phase electric motor with brake SEW Type: DT71K4BMG/HR/TF 240 / 400 V 0.15 kW 1380 rpm IP 55 shaft Ø 14 mm New ! Dimensions: 300 x 220 x 160 mm

Gear motor SEW Type: K46LP80 DT80K4BM/HR/TF ( K46LP80DT80K4BM/HR/TF ) 0,55 KW 84 rpm 230/ 400 V 50 Hz IP55 Shaft diameter: 30 mm New Dimensions: 660 x 270 x 200 mm

Gear motor SEW Type: R60DT63 K4IS ( R60DT63K4IS ) 0.12 KW 7.2 rpm 230/ 400 V 50 Hz IP55 Shaft diameter: 22 mm New Dimensions: 420 x 250 x 200 mm

Gear motor with brake SEW R302D63N4B03/HR 0,18 kW 63 rpm 220 / 380 V IP54 B3, with foot shaft diameter: Ø 16 mm New ! Dimensions: 340 x 160 x 145 mm

Three-phase electric motor with brake SEW Type: DFT80K8/2BMG/HR/Z/IS Power: 0,0,55 kW Speed: 1360 rpm Voltage: 230/ 400 V Frequency: 50 Hz protection class: IP55 Design: B5, with flange shaft diameter: 19 mm New ! Dimensions: 360 x 250 x 200 mm

Three-phase electric motor SEW Type: DFT80K4/2BMG/HR/Z with brake Power: 0.4 / 0.63 kW New ! Speed: 1380/ 2700 rpm Voltage: 400 V Frequency: 50 Hz Protection class: IP55 Design: B5, with flange

Electric motor with brake SEW USOCOME Type: DFT80K8/2BMG with brake Power: 0,0,1/ 0,4 kW Speed: 660 rpm Voltage: 230/ 400 V Frequency: 50 Hz Design: B5, with flange shaft diameter: 19 mm New ! Dimensions: 360 x 230 x 200 mm

Gear motor with brake SEW Type: SA42LP71 D63L4B03/HR/TF ( SA42LP71D63L4B03/HR/TF ) with brake 0,25 KW 30 rpm 220/ 380 V 50 Hz IP54 Shaft diameter: 30 mm used, tested ! Dimensions: 520 x 150 x 220 mm

Gear motor SEW Type: S47DT90L16/2/BMG/HR Gear ratio: i=24,77 Power: 0.09/ 0.9 KW Speed: 12/ 111 rpm Voltage: 230/ 400 V Frequency: 50 Hz Shaft diameter: 25 mm Type B3, with foot New Dimensions: 540 x 270 x 210 mm

Gear motor with brake SEW Type: KF67 DT100L4BMG/HR/IS ( KF67DT100L4BMG/HR/IS ) Power: 3 KW Speed: 19 2 rpm voltage: 230/ 400 V frequency: 50 Hz protection class: IP54 shaft diameter: 40 mm New ! Dimensions: 680x390x250 mm