u bolt press used for sale

Technical data for the pallet rack traverse: Shelving system: Link 51 Type: Boltless XL Included in delivery are: 01x pallet rack traverse, used Material color: yellow Truss type: 4BST Box profile: 80x45 mm Agraffe: 3 hooks Clear width: 2,700 mm incl. inner position angle: W = 20 mm H = 28 mm load per pair of trusses 900 kg, at the same. distributed load 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. A desired Transport or dispatch of this article is associated with additional costs, which can be queried separately from us depending on the place of delivery or scope of delivery. Our services at a glance: (Prices on request) A Assembly, assembly our general assembly conditions must be observed Shelf insp ...

Like NEW! Never used Inductive hardening machine for bolts M8 and M10 with year of manufacture 2019 The equipment is designed for automatic inductive hardening of screws and bolts M8 and M10. The plant was built by the company Grimm Zuführtechnik. It is designed for approx. 70-80 parts per minute (depending on the component) and has various monitoring options (temperatures, component heights, component types, rotation, etc.). The components are conveyed from a hopper belt via a steep conveyor to a linear sorter and from there are separated and transferred to an 8-station indexing table with 2 nests per station. A 50kW HF generator from IDEA is connected, which provides further monitoring (energy quantity, earth fault monitoring, flow quantity and water temperature of the inductor, etc.). The plant has its own tank for quenching water, from which the components are transported out  ...

Schubert Press The platen size is 1390 mm (52”) x 2490 mm (98”) Electric heaters Make - Schubert Daylight – 305mm Floor standing Total number of rams: 16 Ram diameter: 2 ¾” Working pressure 3500 PSI The overall dimensions are length 3850mm x width 1500mm x height 2200mm Operational The condition of the hydraulics and pump unit along with ram seals is good Spare seals maybe possible (video link available on request)

Hydraulic press Pellegrini Hot water Pressing area 4000 mm x 1300 mm manual glue application incl. Insertion table Acceptance: Vacuum - Gantry forklift SIRIO

SERGIANI 2 - Floor Continuous Press Model Leopida/Leomatic Slide-in table 6,000 mm x 1,400 mm Press 5,000 mm x 1,400 mm Discharge roller conveyor 4,000 mm x 1,400 mm

HF Press Manufacturer Ormamacchine High-frequency continuous belt press Manual glue application incl. Laying table / filling bed 5000 x 1400 mm Press 4600 x 1400 mm Roller conveyor outlet 5000 mm Workpiece thickness max 200 mm Side printing cylinder 10 Pressing force 110 t RF Generator 40 Kw Dimension: 16000 x 3200 mm

Fogg & Young C Frame Press 150ton 3400mm wide Upstroking 3x heating zones Eurotherm controllers

Bradley & Turton Upstroke Presses Tonnage: 50ton Electric Platens Double Daylight 15” (375mm) sq. platen Fully guarded With individual pump units

General SKU338T905 LocationBarneveld MakeUHDE Hagen TypeF650 No.1858022/5 Year of construction1987 Pressure Working pressure6 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume30 Ltr. Pressure6 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4571 (316Ti) Notified bodyTÜV Capacity30 ltr Vessel sizesDia: 228x959 mm Dished bottomcheck With covercheck Top connectionsDN 40 OutletG 3/8 Max. temperature-40/120°C Information Mounted on legscheck Weight200 kg Floorspace0,7x0,6 m Total height1,85 mPressure vesselsUhde HagenTanks > Pressure vesselsBrand > Uhde Hagen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Neth ...

General SKU430W1384 LocationBarneveld MakeEdelstahlbau Tannroda Type350 l No.1765 Year of construction2017 Specified Features - Pressure vessel Material finishMirror polished Pressure Working pressure6 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume350 Ltr. Pressure6 Bar Pressure vessels MaterialStainless steel 1.4404 (316L) Notified bodyClosed Capacity450 l., (350 l.) Vessel sizesDia. 800x800 mm Dished bottomcheck ManholeDN400 Top connectionscheck OutletDN30 Max. temperature-20°C/+200°C Information Mounted on legscheck and wheels Weight500 kg CEcheck Floorspace1,10x1,10 m Total height1,70 m Extra Specifications- mirror polished inside - pressure gauge attached Pressure vesselsEdelstahlbau TannrodaTanks > Pressure vesselsBrand > Edelstahlbau Tannroda What you can expect from Foeth: -- Machine is  ...

General SKU430W1390 LocationBarneveld MakeHermann Waldner Type1450 l. No.5064 Year of construction2016 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1000 Ltr. Pressure6 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4404 (316L) Capacity1450 l.( 1000l) Vessel sizesDia. 1200x1500 mm Dished bottomcheck ManholeDN500 Top connectionscheck OutletDN50 Max. temperature-20°C/+200°C With jacketcheck Information Mounted on legscheck Weight1400 kg CEcheck Floorspace1,50x1,30 m Total height2,30 m Extra Specifications- mirror polished inside : - pneumatic outlet valve - no lid Pressure vesselsHermann WaldnerTanks > Pressure vesselsBrand > Hermann Waldner What you can expect from Foeth: -- Mach ...

General SKU430W1385 LocationBarneveld MakeEdelstahlbau Tannroda No.1764 Year of construction2017 Specified Features - Pressure vessel Material finishMirror polished Pressure Working pressure6 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume40 Ltr. Pressure6 Bar Vacuumcheck Pressure vessels MaterialStainless steel 1.4404 (316L), Stainless steel 1.4435(316L) Capacity64 l, (40 l.) Vessel sizesDia. 450x400 mm Dished bottomcheck With covercheck ManholeDN250 OutletDN25 Max. temperature-20°C/+200°C Information Mounted on legscheck and wheels Floorspace0,94x0,94 m CEcheck Total height1,25 m Weight160 kg Extra Specifications- With ball spray, pressure gauge and windowPressure vesselsEdelstahlbau TannrodaTanks > Pressure vesselsBrand > Edelstahlbau Tannroda What you can expect from Foeth: -- Machine is in wo ...

General SKU338T910 MakeUhde Hagen TypeB 560 No.1858022/6 Year of construction1987 Mounted on legscheck Pressure Working pressure25 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume111.6 Ltr. Pressure25 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel Capacity111.6 Ltr. Vessel sizes370x1120 mm Dished bottomcheck With covercheck Top connectionsDN 40, DN 25 OutletDN 25, DN 15, 1/2 Max. temperature-40/50 °C Information LocationBarneveld Floorspace0,75x0,9 m Total height2,2 m Weight400 kgPressure vesselsUhde HagenTanks > Pressure vesselsBrand > Uhde Hagen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for man ...

Used Used Presses Preform PET ENGEL 2004: Year: 2004 Condition: Good Used Presses Preform PET ENGEL: Model: MacPET 4550-320 maszyna nr 52890 Year: 2004 Speed: preform 24,5g ca 21.900 pcs/hrs preform 29,0g ca 20.100 pcs/hr Number of molds: 72 Code: W 111 More details: https://bottlingscout.com

Used Used PET Prefom Presses Husky 2010: Year: 2010 Condition: Good Used PET Prefom Presses Husky: Model: HyPET300 HPP P100/110E 120-hpp 26 Year: 2010 Speed: preform 11,4g ca 39.800 pcs/hrs preform 13,0g ca 38.100 pcs/hrs Number of molds: 72 Code: W 109 More details: https://bottlingscout.com

Used Used Husky preform press: Year: 1989 Condition: Good USED HUSKY PREFORM PRESS Year: 1989 Model: XL225PET Press to 32 cavities Stamp: 31,8 Gr (made by husky in 2010) Safety protections Code: W 95 More details: https://bottlingscout.com

Palletizer Kettner Manufacturer: Kettner Type: Press uni KEG EP - BP Year of construction: 1995

3x Bradley & Turton 50ton Upstroking Presses 380mm x 380mm (15”) sq platens Electrically heated platens 540mm (22”) daylight Fully guarded With individual temperature controls

PALLETIZER KRONES ALONG WITH THE CONVEYORS AS SHOWN IN THE DRAWING ATTACHED Palletizer KRONES PRESS UNI, production year 2007. • Palletizer for collective packages, capacity: approx. 50 pallets / h for specific palletizing formats, • Top loading, packs served in 2 tracks, • Pallet magazine, • A feeder for cardboard pads with a magazine for cardboard pads, • Control cabinet based on Siemens S7 control, • A platform for the operator in accordance with the dimensions presented in the layout, • Operator Panel, • Divider, • Packs turner Packs and pallet conveyors in accordance with the presented layout 1. Empty pallets infeed conveyors 2. Packs conveyors

Palletizer KRONES PRESS UNI, production year 2007 Along with the conveyors presented in the layout. • Palletizer for collective packages, capacity: approx. 50 pallets / h for specific palletizing formats, • Top loading, packs served in 2 tracks, • Pallet magazine, • A feeder for cardboard pads with a magazine for cardboard pads, • Control cabinet based on Siemens S7 control, • A platform for the operator in accordance with the dimensions presented in the layout, • Operator Panel, Packs and pallet conveyors in accordance with the presented layout 1. Empty pallets infeed conveyors 2. Packs conveyors

Palletizer KRONES PRESS UNI, production year 2007 Along with the conveyors presented in the layout. • Palletizer for collective packages, capacity: approx. 50 pallets / h for specific palletizing formats, • Top loading, packs served in 2 tracks, • Pallet magazine, • A feeder for cardboard pads with a magazine for cardboard pads, • Control cabinet based on Siemens S7 control, • A platform for the operator in accordance with the dimensions presented in the layout, • Operator Panel, Packs and pallet conveyors in accordance with the presented layout 1. Empty pallets infeed conveyors 2. Packs conveyors

Type: Pressant Uni 1N Year of Make: 2009 Capacity: max. 25,000 W/H Hours: >8500 Scope of delivery: Pallet transport at the infeed Collection table at the outlet Intermediate layer lifter Intermediate Layer Magazine Pallet magazine Control Siemens S7 Protective cladding Switchboard

General SKUCX003 MakeBHS Werk Sonthofen Maschinen- und Anlagenbau GmbH LocationBarneveld TypeFEST A9 -UNI Main Features MaterialStainless steel Motor15 KW Surface2.16 m2 Specified Features - Rotating vacuum filter MaterialStainless steel 1.4571 (316Ti) Rotating vacuum filtercheck Rotary pressure filter Filter surface2.16 m² Drum sizesDia. 800x1800 mm Motor15 kW, 690/400 volt, (EExdellCT4) With variable speed drivecheck Drum speed300-1500-1800 rpm Information No.300263 Year of construction1994 Floorspace2,80x1,90 m Total height2,30 m Weight±7600 kgRotating vacuum filtersBHS SonthofenFilters > Rotating vacuum filtersBrand > BHS Sonthofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pl ...

Krones Pressant Universal Year of Make: 2020 Neuglass Pusher Output: Operates at 45,000 bph

General SKU001A039 LocationBarneveld MakeUHDE Hagen No.2578 Pressure Working pressure300 Bar Main Features MaterialStainless steel Volume20 Ltr. Motor0.55 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4306 (304L) Stainless Steel Reactors ReactorHigh pressure Capacity20 Ltr Vessel sizesdia. 215x600mm Dished bottomcheck Dished top sidecheck With jacket/Electric heating Internal heating spiral(0,8 Ltr) Max. temperature350 Degr. C. With anchor stirrercheck (built in 1991) Motor0,55 KW, 220/380 Volt (Ex) Speed mixing shaftvariable (± 155-1120 Rpm) Information Year of construction1978, Internal coil built in 1991 Mounted on legscheck Floorspace0,9x0,9 m Total height2,2 m Weight850 kg Extra Specifications- Vessel does not have a bottom outlet Fine chemicalsOther chemicalRubberAgrochemicalsPlastic & polymersCatalysts & fillersSolventsD ...

Used Membrane Filter Press, Chamber Filter Press for sludge dewatering Rittershaus & Blecher / VEB Stassfurt 1000x1000 ( Mix-Paket) Plate size: 1000x1000mm Cake thickness: 40 mm length: 5500 mm Number of Plates: 60 filter pressure: 8 Bar Membrane pressure: 15 Bar Plate transport: manuell filterclothes: optional Membranmix-Paket The machine is in a goog condition and 15 machines like this availabe.

The BTS-Bag Press is ideal for compacting your dry and wet waste into a garbage bag. Large bulky rubbish, but also recyclable materials can be compacted easily and safe to a minimum of its size. The bag compactor impresses with its ease of use and its enormous volume reduction. By compacting these waste and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you also create a safe and clean working environment. Pressing force: 3 Ton Compaction: up to 90 % (material depending) Machine size: 1861 H x 1200 W x 630 D mm Machine weight: 325 kg Transport height: 1861 mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Optimum utilization of garbage bins Reduces the number of waste bins No more climbing into bins Reduces fre ...

VERTICAL PRESSURE: 2 x 315 T, HORIZONTAL PRESSURE: 2 x 200 T, VERTICAL STROKE - UPPER PISTON: 200 MM - BOTTOM PISTON: 150 MM, HORIZONTAL STROKE: 200 MM, OPERATION PRESSURE: 280 BAR,

Ironing Pressing Line composed by In feeding Belt System Hot Press Cold Press Out Feeding Belt System

To the fully automatic Assembly of frame parts. Frame dimensions: min. 120 x 120 mm Max 700 x 2,500 mm

Herman Schwabe Die Cutting Shaping Press Mechanical Press Model DG-HD Platen size 770mm x 1000mm Die cut shapes Manual cut / load pressure 4" stroke, 7" bore, 10 H.P. Motor, 415 volts 50 cycles 3 phase 14.84 full load current Made in Brooklyn, New York Serial number 50367 Complete with starter Overall dimensions 1.2m x 1.5m high x 3.3m long

Hydraulic glue press with heating base, infinitely variable temperature setting, stuffenlose setting of the adhesive holding time, Power: 5 kW, 380 v 50 Hz; Two-hand operation.

Qty. 1 Second-hand extrusion press Mfc.: Kobe Steel Built: 1985 Force: 1500 MT Type: Horizontal 4 cylinders, indirect press, independent Control Billet dimensions: dia. 175 mm x 400 – 800 mm Length Application: Extruded?Copper?Alloys

PRESS FOR PRODUCTION ALUMINIUM TRAYS FOR ALIMENTARY USE COMPLETE WITH DOUBLE IMPRESSION MOULD-1100 CC. COMPOSED OF: A LUBRICATION UNIT 4-COLUMN MOLDING UNIT TOW-SCRAP CONTROL PANEL. 55 STROKES/MINUTE DEPENDING ON THE MOULDS. PASS COLUMNS FOR MOULDS UP TO 800 MM

Weingarten Excenter Press

Veneer Press Dryer Manufactured by BABCOCK Model: BDI420/12 Working Width: 4200 mm N. of Heated Sections: 6

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of the force adjustment: . . . . . . . . . . . . . . . . . Maximum opening speed: 50mm/s Approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing f ...

PressOne P1S-8 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-8 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 80 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Progra ...

PressOne P1S-10 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-10 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 100 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - P ...

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Program ...

Tool cases for press-fit machines Tool holder type Haeger (compatible) 22 press-in tools for press-fit-in contact-press-persefesters Manufacturer: PressOne - Made in Finland

pressure:15 t stroke:160 mm weight of the machine ca.:330 kg Oil tank capacity:10 l

was used to fill sugar cane molasses into containers open lubrication Dimensions 700 x 500 x 1200 mm

Vertical baler HSM V-Press 1160 plus, built in 2016 Specifications: Manufacturer: HSM Type: V-Press 1160 plus Stock No.: 9960 Year of Make: 2016 Press force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (WxDxH) Weight: 2430 kg Materials: paper, cardboard, foil The instruction manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and guarantee. Our payment term is 100% prepayment.

IMA KILIAN PRESSIMA (mint condition, just over 100 operating hours, year of construction 2007) Accessories include a multi-tool set (5 × 4 mm) (new price: €12,000, 6 months old) and a single tool set (5 mm) Optionally, a control retrofit can be carried out with a Siemens S7-1200 and a Siemens TP panel. Tablet press as in the delivery condition, as new, with complete documentation, functional software etc. ! The IMA KILIAN PRESSIMA tablet press is a compact, universally applicable press for R&D. Thanks to its small dimensions, the PRESSIMA can be easily installed even in small spaces. Tool and die system The PRESSIMA has a replaceable die disc. This means that B or D tools can be used (EU or TSM standard). Operation and display • The PRESSIMA can be equipped with a measurement of the main press force including a digital display on the machine panel for the production of s ...

used cabinet press Manufacturer: HSM Type: V-Press 825 plus pro Year of construction: 2018 Machine no.: 6152.324. Series No.: 570001118 specifications: Pressing force: 25 t Filling opening: 1,195 - 540 mm (W x H) Press box dimensions - 1,200 x 780 x 1,300 mm (L x W x H) Bale size: 1,200 x 780 x max. 700 mm Bale weight: up to 280 kg Drive power: 4 kW Cycle time at idle (theoretical): 39 sec. Binding: 4-fold - vertical with polyband Machine dimensions: 1,700 x 1,248 x 2,370 mm (W x D x H) Machine weight: 1,210 kg (Subject to errors in the technical data)

Vertical baler HSM V-Press 860 plus B, built in 2019 Technical data: Manufacturer: HSM Type: V-Press 860 plus B Year of Make: 2019 Hours: 119 Pressing force: 60 t Drive power: 4 kW Filling opening: 1500 x 651 mm Filling height: 1129 mm Bale size: approx. 1500 x 1200 x 780 mm Bale weight: 550 kg Binding: manual Theor. Idle cycle time: 25 s Theor. Pressing capacity: 32.5 cbm/h Dimensions: 2099 x 1245 x 2985 mm (WxDxH) Weight: 2340 kg Materials: foil, paper, cardboard boxes Note: The press is in very good condition. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and g ...

Vertical baler HSM V-Press 860 plus, built in 2019 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of Make: 2019 Hours: 311 Pressing force: 60 t Drive power: 4 kW Filling opening: 1195 x 645 mm Filling height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Binding: manual Theor. Idle cycle time: 25 s Theor. Pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (WxDxH) Weight: 2213 kg Materials: foil, paper, cardboard, punching residues, clothing, big bags, polystyrene Note: The press is in very good condition. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale i ...

Vertical baler HSM V-Press 860 plus, built in 2019 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of Make: 2019 Hours: 433 Pressing force: 60 t Drive power: 4 kW Filling opening: 1195 x 645 mm Filling height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Binding: manual Theor. Idle cycle time: 25 s Theor. Pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (WxDxH) Weight: 2213 kg Materials: foil, paper, cardboard, punching residues, clothing, big bags, polystyrene Note: The press is in very good condition. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale i ...

Vertical baler HSM V-Press 860 plus B, built in 2019 Technical data: Manufacturer: HSM Type: V-Press 860 plus B Year of Make: 2019 Engine hours: 141 Pressing force: 60 t Drive power: 4 kW Filling opening: 1500 x 651 mm Filling height: 1129 mm Bale size: approx. 1500 x 1200 x 780 mm Bale weight: 550 kg Binding: manual Theor. Idle cycle time: 25 s Theor. Pressing capacity: 32.5 cbm/h Dimensions: 2099 x 1245 x 2985 mm (WxDxH) Weight: 2340 kg Materials: foil, paper, cardboard boxes Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and guarantee. Our payment term is 100% p ...