type used for sale

Automatic sub-u. Upper feeder Top rolled rivet, shank diameter bottom record cap 10 mm The rivet length is variably adjustable With cross-light target facility Safety trigger The machine is in very good condition, as the machine was only used for a short time

Packaging line Ishida / Prewa The packaging line was used for packaging accessories. Available now. The facility consists of: 1 St. Ishida multihead weigher (10 heads), built in 2004 1 St. Ishida multihead weigher (10 heads), built in 2003 1 St. Prewa vertical packaging machine (type 25/40), built in 2005 2 Z-shaped conveyor belts 2 St. vibrating gutters 1 piece of bunker tape

Rovema Type GS+ SPA 644+DAS 128 Year of construction 1998 Outer carton folding, lid folding and packaging

Rovema Type ETO Year of construction 2009 Outer carton folding and packaging

Mixers, make Haarup, planetary mixers = - Make Haarup, type 2250/1500 (2,250 l mixer) - 75 kW, dead weight 6,600 kg - Condition very well maintained and maintained - Available from the end of August 2026

General SKU291Y830 MakeJohnson LocationBarneveld Main Features MaterialRubber Lined Volume20000 Ltr. Motor1.1 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 Capacity± 20 m³/h With motor1,1 kW (230/400 V 680 rpm) InletDN40 OutletDN40 Eccentric Screw Pumps MaterialRubber, Stainless steel 1.4408 General Floorspace0,75 x 0,36 m Total height0,4 m Weight50 kgStarchOther chemicalRubberAgrochemicalsPlastic & polymersEccentric Screw PumpsFeed additivesDetergent & surf.Food additivesLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicPaints & coatingsJohnsonIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersPumps > Eccentric Screw PumpsIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & s ...

Lift-tilt device, lifting tipper Make Itec, type 2700, built in 2017 for 200 and 300 litre standard loading trolleys Max. lifting capacity: 350 kg Dumping height: 2,231mm incl. 1 standard loading trolley 3x460V 50 Hz 0.75 kW - very good condition, hardly used - Was used to feed a piston filling machine - Documentation/operating instructions available Viewing possible in Korntal-Münchingen

Key data: 1000 kN, 157 g/PS, 42 mm

1.0 pcs. Two-component injection moulding machine electric Manufacturer: DR. BOY Type: 100E Type: 552 Year of Make: 2017 Clamping force: 100 tons Spar spacing (hxv) 430 x 360 mm Installation height MIN. 250 mm Screws DN 1: 42 mm Moulded part weight 1: 157.6 g/hp Screws DN 2: 24 mm Moulded part weight 2: 39.1 g/hp Control: PROCAN ALPHA Equipment: 1 x Core Pull Highly wear-resistant plasticizing unit Control Pneumatic Needle Gate Nozzle Dryer, manufacturer: FARRAG, year of manufacture: 2016

machine number type model year clampingforce distance between openingstroke screw shotvolume tiebars diameter ton mm mm mm cm3 1 2000-1450 S+ 2011 200 530x530 550 62 845 E-screwdrive 2 2000-850 S+ 2012 200 530x530 550 52 499 E-screwdrive 3 2000-850 S+ 2012 200 530x530 550 45 374 E-screwdrive 4 2500-850 S+ 2006 250 585x585 575 45 374 E-screwdrive 5 2500-1450 S+ 2009 250 585x585 575 62 845 E-screwdrive 6 3300-2150R S+ 2010 330 630x630 620 62 513 E-screwdrive 7 3300-5650 SXS 2006 330 630x630 620 84 1247 E-screwdrive 8 4400-3550 S+ 2010 440 730x730 720 72 1547 E-screwdrive 9 4400-3550 S+ 2010 440 730x730 720 72 1547 E-screwdrive 10 4400-5650R-2K SXS 2007 440 845x845 850 84 1247 E-screwdrive 11 4400-5650R-2K SXS 2007 440 845x845 850 84 1247 E-screwdrive 12 4400-5650R S+ 2008 440 730x730 720 84 1247 E-screwdrive 13 4400-5650 S+ 2009 440 730x730 720 84 249 ...

AEG Double Grinding and Polishing Machine – Type DP 300/2200 -Operating voltage: 380 V -Motor power: 2.2 kW -Max. disc diameter: Ø 300 mm -Max. pane width: 50 mm -Polishing spindle speed: 1,400 rpm Dimensions: LxWxH 1.2x0.4x0.9 meters / Weight 180Kg

for sale 30 units nozzoles Fram

CTP Computer to Plate Heidelberg Topsetter 102 Type 2310 CTP Computer to Plate Heidelberg Topsetter 102 Type 2310 Baujahr / Year 2001 - Serial-No. 013940157 Plate Format min. 370 × 323mm - max. 930 - 1140mm Plate thickness 0.15 - 0.40mm Up to 15 plates/h Auto loading Without RIP and Dongle. Up to 15 plates/h

Swing cut shears Make: Simat Type: SST 3010 Year of Make: 1990 Cutting length: 3010 mm Sheet thickness: 10 mm -Cutting line lighting -Adjustable cutting gap - Motor power: approx. 19 kW -Backgauge Length: 3750 mm Width: 1700 mm Height: 1530 mm Weight approx. 8700 kg Return stroke by nitrogen cylinder Nitrogen cylinder: resealed in 2024 no guarantee, no return, no warranty Machine is still in commercial use and can be viewed by appointment. Transport from the hall and removal is carried out by the buyer and at his expense.

Key data: 3050 mm, 20 mm, 800 mm

Hydraulic Sheet Metal Shear / Hydraulic Guillotine Shear Make: Steiner Type: HTS 30/20 Year of manufacture 1978 -Cutting length: 3050 mm -Cutting thickness: 20 mm -Back gauge: 800 mm, via handwheel - Motor power: approx. 30 Kw -Spare blade Basic machine: 4650 mm long, 2610 mm wide, 3200 mm high Weight: approx. 27,000 kg -Mechanical, in good condition- -Optical, in good condition- Hydraulics leak slightly no guarantee, no return, no warranty Machine is still in commercial use and can be viewed by appointment. Transport from the hall and removal is carried out by the buyer and at his expense

Key data: 650 , 152 , 35

Presse à injecter BILLION Proxima 65 T type 650-H310 Année : 2005 Commande : DIXIT 2 Groupe d'injection : H310 Force de verrouillage : 65 T Diamètre vis : 35 mm Rapport L/D : 20 Volume injectable : 168 cm3 Pression d’injection : 2025 bars Distance entre colonnes : 500 x 460 mm Dimension des plateaux : 660 x 600 mm Distance maximum entre les plateaux : 730 mm Course d’ouverture maximum : 330 mm Epaisseur moule min/max : 200/400 mm Dimensions : 4,17 m x 1,43 m x 1,85 m Poids : 5,9 T

Key data: 4300 , 1645 , 80

NEGRI BOSSI 430 T, model 4300H-2920 Year: 2019 Clamping force: 430 T Injection volume: 1810 cm³ Injection capacity: 1645 g (PS) Screw diameter: 80 mm Injection pressure: 1615 bar Mold thickness (min/max): 250 – 800 mm Opening stroke: 730 mm Distance between tie bars (H x V): 760 x 680 mm Platen dimensions: 1135 x 1060 mm Machine dimensions: 9340 x 2150 x 2315 mm Weight: 16,500 kg

ENGEL - 1100 T type ES 16050/1100 DUO Clamping force: 1100 T Year: 1999 good condition Working hours: 85 000 Screw diameter: 150 mm Column diameter: 230 mm Injection volume : 10 955 cm³ Injection pressure: 1330 bar Ejection force: 215 N Opening stroke: 1800 mm Platen dimensions (H x W): 1150 mm x 1400 mm Heating capacity: 113 kW Total weight: 77 000 kg

Key data: 4200 , 70

DEMAG 420 T type 800-1450 Commande : NC4 Année : 2001 Force de fermeture : 420 T? Diamètre vis : 70 mm? Volume injectable : 1039 cm³? Pression d'injection : 1 450 bars Entre colonnes : 810 x 710 mm? Dimensions des plateaux : 1200 x 1100 mm? Épaisseur du moule min : 380 mm Quantité d’huile: 760 L Poids : 20 200 kg? Dimensions : 7,90 x 2,40 x 2,20 m

The machine is in good technical condition; testing is possible by prior arrangement. Dimensions (m): 8.8 × 2.25 × 3 (estimated). Magnet (mm): 3500 × 700.

Complete skid-mounted Tetra Pak Tetra Alcross Bactocatch MB Microfiltration (MF) plant, type 1 x M74 / 1 x M19, manufactured in 2011 and specifically designed for hygienic dairy processing applications., The Tetra Alcross Bactocatch system is designed for the highly efficient removal of bacteria and bacterial spores from milk by means of ceramic membrane microfiltration combined with High Temperature Treatment (HTT) of the cream fraction. The process can achieve a bacterial and spore reduction of up to 99.9999%, depending on the product and operating conditions., The fully skid-mounted installation is designed for continuous microfiltration of milk and is suitable for applications including the reduction and removal of bacteria and spores from skim milk, cheese milk and ESL milk, as well as protein fractionation. The plant was previously operated for the treatment of skim milk for the re ...

Conveyor Belt Straight Type GL MTF Technology Length 3.30 m Width 0.57 m is operated with 230 V – cable (missing) is wired directly in the control box with usual signs of use Price is exclusive of VAT

Swivel spindle milling machine VEMA TFMS 2-4 very good condition, as good as new, the machine comes from a penitentiary and has only stood for the last few years, it has been used very little and only operated by one person the company VEMA comes from northern Germany, the machine is similar in design to the KÖLLE F45 or the PANHANS 240 everything works perfectly all bearings and guides are OK Year of construction 1998 the machine has the control panel at the top with milling stop, which can be adjusted in depth on one side or completely, this is possible with a handwheel, there is a mechanical counter for the complete adjustment, the counter can be set to zero at any point at the touch of a button, so the stop can be adjusted quickly and very precisely both stop jaws can also be adjusted individually, there are also 2 mechanical counters, due to the one-sided adjustment, dres ...

Baler Bramidan Model HDX50 Type PEV Year of manufacture 2005 Electric drive 5.5 kW Pressing force 50 t Filling opening 1,090 x 610 mm Bale size 1,200 x 800 x 1,100 mm Stroke 1,210 mm Cycle duration avg. 22 s 4 lacing + lacing ribbon or steel wire Automatic bale ejection Dimensions: Length 1,965 mm x Width 1,365 mm x Height 2,540 mm Weight 2.5 t Sale against bid from location D - BL Thuringia Code No. Q53

Technical specifications: Manufacturer: FLENDER Type: CDA 250 Series: BA 6610TU (worm gear) Drive speed: 917 rpm Output speed: 12.4 rpm Side: Ascending to the right Wavelength: 105 mm Shaft diameter: 65 mm

TECHNICAL SPECIFICATIONS: Manufacturer: FLENDER Type: CFA 250 Series: BA 6610TU (worm gear) Drive speed: 870 rpm Output speed: 24.86 rpm Side: Ascending to the right Wavelength: 105 mm Shaft diameter: 65 mm

TECHNICAL SPECIFICATIONS Manufacturer: AUMA (GFC) Type: S 250.1 Type: Worm gearbox Reduction ratio (i): 7.75 Side: Ascending to the right Oil: PG460 / 14.0 Ltr. Shaft length: 135 mm Shaft diameter: 65 mm

TECHNICAL SPECIFICATIONS Manufacturer: AUMA (GFC) Type: S 160.1 Type: Worm gearbox Drive speed: 940 rpm Output torque: 1,922 Nm Reduction (i): 30 Oil: PG460 / 4.5 Ltr. Side: Left and right ascending Weight: 170 kg SPECIFIC COMMENT - Matching pair of gearboxes

TECHNICAL SPECIFICATIONS Manufacturer: AUMA Type: S 160.1 Type: Worm gearbox Drive speed: 940 rpm Output torque: 1,922 Nm Reduction (i): 30 Oil: PG460 / 4.5 Ltr. Side: Left and right ascending Weight: 170 kg SPECIFIC COMMENT - Matching pair of gearboxes

Gripper Kröger UWS-5 Type 3003 for dredgers/ duty cycle crawler cranes Year of manufacture 2022 + was only in use for 1.5 years 3.5 m³ + rope Ø 22-24 mm + rope roll Ø 400/470 mm Closing stroke 1,970 mm + Closing rope stroke 9,850mm incl. brand new wheels with shafts Weight 3,750 kg Good, operational condition Net price 29.900,-- € + VAT   Sales from location Hungary (West) Code No. P67

Key data: 17000 mm, 4800 mm, 1270 mm

We are also pleased to offer the following Waldrich Coburg Gantry Milling Machine, located in Illinois, USA. Machine Details: Total Weight: Approximately 90 Metric Tons CNC Control & Upgrades: Siemens 840D CNC control (retrofitted in 2013) New CNC control system Complete new electrical wiring and electrical cabinets New Siemens AC motors and drives New main drive and motor Heidenhain glass scales on all axes Rigid tapping capability Included Equipment: (1) Right-Angle Head, Model WFU 250, ISO 50 taper, automatic indexing (1) Right-Angle Head, Model WFU 500, ISO 60 taper, automatic indexing Tool trolley with tool holders Steel sliding-way covers on X and Y axes (2) Chip conveyors Machine Capacities: X-Axis (Gantry Travel): 669” (16,993 mm) Y-Axis (Head Travel): 189” (4,800 mm) Z-Axis (Ram Stroke): 50.05” (1,271 mm) Distance Betwe ...

very well preserved BLUTHARDT, power 50 mm

Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible.

Perfect standing Auction-ID: A3-46100-2890

Flotjet 2000 table-type circular saw, model 480003, for precise rip, cross and mitre cuts in small pieces of solid timber, sheet materials and plastic. The robust construction, the swivelling table and the integrated sliding table enable flexible and precise workpiece guidance and high cutting accuracy. Suitable for furniture making, interior fit-out and craft workshops. Technical data: Pitch: ~ 650 mm Cutting width: ~ 170 mm Cutting height: ~ 40 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

HSE HUGO SACHS Simulator C Type 224 (16076) + TAM-A Type 705-1 (16556) The Stimulator C is a compact and highly stable square pulse stimulator with precise digital time control. Its large LCD display (2 lines of 40 characters) and reduced controls simplify installation and use. Ideal for pacing with isolated cardiac systems. Auction-ID: A1-51527-161

HSE HUGO SACHS Simulator C Type 224 (15064) + TAM-A Type 705-1 (15545) The Stimulator C is a compact and highly stable square pulse stimulator with precise digital time control. Its large LCD display (2 lines of 40 characters) and reduced controls simplify installation and use. Ideal for pacing with isolated cardiac systems. Auction-ID: A1-51527-216

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

Automatic cut off saw for cutting pre-programmed fixed lengths and fault trip caps after chalk marking. Not much worked top condition.

Ladies and gentlemen, Below we can offer: Manufacturer: Make: 1 piece used continuous furnace, make: Safed Type: 11Bd40/24 Built: 2005 max. working temperature: 1100C Heating capacity: 60 kW Dimensions Length: 15,000 mm Usable width: 340 mm Useful height: 150 mm Heating chamber length: 2,380 mm Muffle, cooling channel new Prices and pictures on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty e ...

VHM shank cutter from Garant (20 3160 - 20) lightly used, DIN 6527, type N, D= 20 mm number of teeth - 8, ask also for other quantities from the cutters. Price for 10 pieces 240,-€ for 1 piece 25,- €

MAX. TEMP.: 1000 °C, CAPACITY: 60 TON, NO. OF BURNERS: 20,

Kragarmregal OHRA 3 m high Over 100 m in stock, see pictures. Height 3 m high Boom 100 cm Load capacity/boom 800 kg 4.5 running metres, 4 pcs. stder with boom Negotiation price: € 1,440,-- /net Offer consists of: 4 St. Stander with foot 3 m high 4 adjustable booms, per stand 100 cm, load capacity 800 kg/boom. Diagonal struts, stiffening and distances are included. Frame spacing 150 cm Load capacity per stand per side 3,200 kg Height of 2.5 m, 4 m or 6 m available Other compilation on request: Constantly over 3000 lfm pallet racks in stock by numerous manufacturers. Transport and assembly possible on request. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, ...

Tool cabinet for bending tools Suitable for WILA/TRUMPF Tools or type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -extendable drawers, allows the two-sided access to the tools -arbitrary adjustment of the inserting roofs -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) run drawers Roller slide rails (serve as additional stabilization) - the cabinet can be disassembled - number of drawers: 4 sets - Mass of a drawer : - total height 1200mm / total width 850mm / total depth 1180mm - Mass of the Fa echer in a drawer: compartment hoehe set to 210mm (is varriabel) technical height total usable without intermediate boeden 990mm - specialist width usable 130mm depth usable 1100mm - Number of intermediate boeden: 4 Stueck / completely continuous; new ready for use

Tool cabinet for bending tools / exhibition object suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg - for AMADA/Promecam tools -extendable drawers, allows double-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated -side fork rails for transport by forklift (cavity under the cabinet) -the drawers run on roller slide rails ( serve as additional stabilization) -the cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Fachbreite usable 130mm - Technical depth usable 980mm - Number of intermediate boeden: 3 stueck

Tool cabinet for bending tools suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allows the two-sided access to the tools -any adjustment of the inserting -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) Cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: compartment hhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Tray width usable 130mm - Depth usable 980mm - Number of intermediate boeden: 3 stueck

Drilling capacity in steel/GG: 23 mm spindle retainer: 2 MK projection: 300 mm table size: 300 x 300 mm Quill stroke: 100 mm spindle speeds: 190-1500 rpm drive motor: 380 V, 0.5/0.75 kW space: 410 x 670 x 1950 mm weight: 180 kg

100 lfm shelf shepherd type R3000 Ne- and used goods, see pictures Height 2.5 m Depth 40 cm Load/fold 150 kg Field width 128 cm Negotiation price: € 6,220,-- net from stock Offer consists of: 78 pcs stand or frame, 2.5 m, galvanized new 462 pcs. shelves, 150 kg load/compartment, galvanized used 26 St. Cross Associations for Stiffening 6 levels per field (several are of course possible at an extra cost) Field width also available in 100 cm! Goods are in stock. Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, or ...

Drilling capacity in steel/GG: 50/60 mm spindle retainer: 5 MK projection: 400 mm table size: 700 x 600 mm Quill stroke: 275 mm spindle speeds: 32-1030 rpm feeds: 4: 0.1 ? 0.4 mm drive motor: 380 V, 2.2/3.7 kW space: 700 x 1200 x 2700 mm weight: 1240 kg

Drilling capacity: 40 mm tool holder: MK 4 speed (spindle): 90-1455 K rpm projection: 320 mm drilling table swivel: +/-50° distance spindle to table maximum: 590 mm distance spindle to base plate: 1155 mm column diameter: 120 mm table size: 505 x 425 mm worktop base plate: 360 x 370 mm motor power: 1.0 / 1.5 kW machine dimensions (W x D x H): 500 x 930 x 1870 mm weight approx.: 450 kg Accessories: - Chuck Dorn MK 4 / B 18 - coolant system - digital speed display - keyless drill Chuck 1-16 mm / B 18 - reduction sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 - halogen lamp - automatic tool ejector - protective cover

Table clamping surface: 500 x 1600 mm table movement x: 1220 mm table movement y: 500 mm table movement z: 500 mm spindle retainer: SK 50 spindle speeds: 56-2800 rpm feeds longitudinal & cross: 10-1800 mm / min feed vertically: 2.5-450 mm / min. Supply: 400 V, 16 kVA kW space: 2000 x 2250 x 2150 mm weight: 4500 kg