typ used for sale

Plastic diaphragm valve, pneumatically actuated GEMÜ Typ 630 25D 78711412/N 88242046-00 DN25 PN10 Installation dimensions: 120 mm Control pressure: 5,0 - 6.0 bar Valve body material: PP diaphragm material: EPDM Base plate: 132 x 71 x 15 mm hole spacing: 110 mm 2x bore: Ø 9.5 mm New ! Dimensions: 145 x 132 x 210 mm

Plastic diaphragm valve, pneumatically actuated GEMÜ Typ 630 32D 78711413/N 88278021-00 DN32 PN10 Installation dimension: 135 mm Control pressure: 5,5,0 - 6.0 bar Valve body material: PP diaphragm material: EPDM Base plate: 150 x 85 x 10 mm hole spacing: 125 mm 2x bore: Ø 9.5 mm New ! Dimensions: 165 x 150 x 280 mm

Plastic diaphragm valve, pneumatically actuated GEMÜ Typ 610 15D 7851411/N 88037717 DN15 PN6 Installation dimensions: 90 mm Control pressure: 5,0 - 7.0 bar Valve body material: PP diaphragm material: EPDM New Dimensions: 100 x 90 x 115 mm

Angle seat valve, pneumatically actuated GEMÜ Typ 550 550 25D 1734 512G1RS113 88284925 4,0 - 8,0 bar 180°C 15 m3/h DN25 PN25 Installation dimensions: 80 mm 7.0 bar Material valve body: stainless steel (1.4435) New, with documents ! Dimensions ( valve ): 270 x 110 x 65 mm Dimensions ( packaging ): 290 x 120 x 110 mm

Metal diaphragm valve, pneumatically actuated GEMÜ Typ 615 15D 1121321/N 88090958 DN15 PN6 Installation dimensions: 75 mm Control pressure: max. 5,5,5 bar Valve body material: Brass diaphragm material: EPDM New Dimensions ( valve ): 75 x 70 x 112 mm Dimensions ( packaging ): 150 x 100 x 85 mm

Plastic diaphragm valve, pneumatically actuated GEMÜ Typ 690 25D 7711411/N 88072419 4758987 DN25 DA32 PN10 Installation dimensions: 117 mm Control pressure: 5,5 - 7.0 bar valve body material: PP diaphragm material: EPDM mint ! Dimensions: 146 x 128 x 262 mm

Plastic diaphragm valve, pneumatically actuated GEMÜ Typ 690 32D 7711412/N 88052558 4758988 DN32 DA40 PN10 Installation dimension: 135 mm Control pressure: 5,5 - 7.0 bar Valve body material: PP diaphragm material: EPDM mint ! Dimensions: 175 x 160 x 330 mm

Plastic diaphragm valve, pneumatically actuated GEMÜ Typ 690 25D 7711411/N 88072419 47858983 DN25 DA32 PN10 Installation dimensions: 117 mm Control pressure: 5,, 5 - 7.0 bar Valve body material: PP diaphragm material: EPDM mint ! Dimensions: 146 x 128 x 233 mm

Plastic diaphragm valve, pneumatically actuated GEMÜ Typ 690 15D 7711411/N 88072417 47858986 DN15 DA20 PN10 Installation dimensions: 109 mm Control pressure: 5,5 - 7.0 bar Valve body material: PP diaphragm material: EPDM mint ! Dimensions: 146 x 128 x 233 mm

Plastic diaphragm valve, pneumatically actuated GEMÜ Typ 690 32D 7711412/N 88052558 4758984 DN32 DA40 PN10 Installation dimensions: 135 mm Control pressure: 5,5 - 7.0 bar Valve body material: PP diaphragm material: EPDM mint ! Dimensions: 175 x 160 x 270 mm

Plastic diaphragm valve, manually operated GEMÜ Typ 677 25D 771140 88072076 582850 DN25 DA32 PN10 installation dimensions: 116 mm valve body material: PP diaphragm material: EPDM as good as new Dimensions: 116 x 85 x 130 mm

Premixer Falterbaum Typ: Famix 5000 Capacity: up to max. 5.000 l/h Year of manufacturing: 1973 2-component mixer with Bran + Lübbe pump (syrup and water) including vacuum pump

Key data: 17 mm, 40 , 1200 U/min

Kategorie / Category: Twin-screw extruder / Twin-screw extruder Nummer / Number: DE27684 Manufacturer / Manufacturer: Leistritz Typ / Type: ZSE 18 HPe Baujahr / Year: 2009 Capacity: approx. 40 - 60 kg/h Motor: 9.4 kW AC max. screw speed: 1,200 rpm Screw diameter: 2 x Ø 18.8 mm L/D: 40:1 Material: PE, PP, PS, ABS + fillers // more details: synchronous, atmospheric degassing, segmented screws and barrels // Control: MacromateXX Siemens with visualization //

Lainox combi steamer, type: NAEB201R, model: LX TYP NAEB201, number: LA020154398, year of construction: 2019, 400 V, 3 Ph, 50 Hz, 31.8 kW, electric heated, dimensions: 1000 mm x 960 mm x 1820 mm. Including 3 s/s trolleys, 15 floors, floor dimensions: (15x) 530 mm x 330 mm, trolley dimensions: (3x) 700 mm x 480 mm x 1700 mm.

MATEC forklift blades are robust and easy to build and can be attached to almost any commercial lyklift. With a fuse bolt, the tilting device can be blocked for special inserts. The front shutter flap can be mounted on any shovel. The interchangeable scraper is suitable for planing work such as removing ice, repelling soil, gravel or feed, etc. - Bucket width 1950 mm - Bucket depth type 1: 1000 mm, shovel depth type 2: 1330 mm - Bucket height without attachment 450 mm - Weight approx. 220 kg - Payload 2000 kg - Steel sheet 4 mm industrial lypainted - Fork shoes axle distance 800 mm - Fork tine width max. 170 mm - Fork thickness max. 60 mm - 4 lifting eyelets for krange slopes - Tilting device for cable pull with lifter and spring reset, securing bolt Options at extra cost: - Type 2 shovel depth 1330 mm Total price € 1590.00 - Front shutter € 590.00 - hydr. Liftin ...

Ladies and gentlemen, Below we can offer: Manufacturer: Make: 1 piece used continuous furnace, make: Safed Type: 11Bd40/24 Built: 2005 max. working temperature: 1100C Heating capacity: 60 kW Dimensions Length: 15,000 mm Usable width: 340 mm Useful height: 150 mm Heating chamber length: 2,380 mm Muffle, cooling channel new Prices and pictures on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty e ...

Manufacturer: PAMA, Italy Model: AT 130/3 CNC Year of manufacture: 1996 Control: CNC SIEMENS SINUMERIK 828 Condition: Excellent, complete, machine will be equipped with a new CNC control SINUMERIK 828! Location: Machine in our warehouse Rudniki, Poland. Technical details Spindle diameter: ø 130 mm Rotary table: 1600 x 1600 mm Table capacity: 12000 kg X axis travel: 2500 mm Y axis travel: 2400 mm Z axis travel: 750 mm W axis travel: 2030 mm Max spindle speeds: 2200 RPM Main motor Power: 35 KW ATC magazine: 100 pcs Rapid feeds: - X- 10,000 mm/min - Y- 12,000 mm/min - Z- 6,000 mm/min - W – 12,000 mm/min - B – 2 Gear steps 2 ranges Torque in axes: X- 55 Nm; Y- W-B- 37 Nm; Z- 27 Nm Weight: 35 kg Max. tool diameter with all places occupied: 140 Max. tool length: 600 mm Equipment: - 1 psc.Rotary table - ATC for 100 pcs - APC 2 pcs 1600 x 1600 mm - External  ...

Automatic cut off saw for cutting pre-programmed fixed lengths and fault trip caps after chalk marking. Not much worked top condition.

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

MAX. TEMP.: 1000 °C, CAPACITY: 60 TON, NO. OF BURNERS: 20,

Tool cabinet for bending tools Suitable for WILA/TRUMPF Tools or type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -extendable drawers, allows the two-sided access to the tools -arbitrary adjustment of the inserting roofs -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) run drawers Roller slide rails (serve as additional stabilization) - the cabinet can be disassembled - number of drawers: 4 sets - Mass of a drawer : - total height 1200mm / total width 850mm / total depth 1180mm - Mass of the Fa echer in a drawer: compartment hoehe set to 210mm (is varriabel) technical height total usable without intermediate boeden 990mm - specialist width usable 130mm depth usable 1100mm - Number of intermediate boeden: 4 Stueck / completely continuous; new ready for use

Technische Daten: - Schnittlänge 2200 mm - Schnittbreite 1300 mm - Schnitthöhe 90C 130 mm - Schnitthöhe 45C 90 mm - Sägeblatt 45C schwenkbar - max. Sägeblattdurchmesser 400 mm - Durchmesser Ritzsägeblatt 120 x 20 mm - Drehzahl Hauptsägeblatt 3000 / 4000 / 5000 Upm. - Drehzahl Ritzsägeblatt 8000 Upm. - Motor 5,5 kW / 400 V - Motor Vorritzer 0,75 PS - Schiebetischprofil Breite 420 mm - Gusstisch 1020 x 690 mm - Absaugstutzen 90 mm und 100 mm - Platzbedarf L=4600, B=3350, H=1500 mm - Transportabmessungen L=2240, B=1150, H=1150 mm   L=2450, B= 460, H= 300 mm - Gewicht 900 kg Inklusive: - Parallelanschlag 900 mm mit Feineinstellung - Tischverlängerung 750 x 690 mm - Tischverbreiterung 1020 x 680 mm - größflächiger Tischausleger 1280 x 630 mm (verschiebbar) mit Materialrolle,   Winkel- und Gehrungsanschlag (ausziehbar bis 3400 mm) - Tischöffnung 250 x 150 mm für schnellen und e ...

Technische Daten: - Schnittlänge 3200 mm - Schnittbreite 1300 mm - Schnitthöhe 90C 130 mm - Schnitthöhe 45C 90 mm - Sägeblatt 45C schwenkbar - max. Sägeblattdurchmesser 400 mm - Durchmesser Ritzsägeblatt 120 x 20 mm - Drehzahl Hauptsägeblatt 3000 / 4000 / 5000 Upm. - Drehzahl Ritzsägeblatt 8000 Upm. - Motor 5,5 kW / 400 V - Motor Vorritzer 0,75 PS - Schiebetischprofil Breite 420 mm - Gusstisch 1020 x 690 mm - Absaugstutzen 90 mm und 100 mm - Platzbedarf L=6700, B=3350, H=1500 mm - Transportabmessungen L=2240, B=1150, H=1150 mm L=3350, B= 460, H= 300 mm -Gewicht 1000 kg Inklusive: - Sägewagen mit wartungsarmer Rundstangenführung - motorische Höhenverstellung - motorische Schwenkverstellung mit digitaler Anzeige - Parallelanschlag 900 mm mit Feineinstellung - Tischverlängerung 750 x 690 mm - Tischverbreiterung 1020 x 680 mm - größflächiger Tischausleger 1280 x 630 mm (versch ...

Technische Daten: - Schnittlänge 3200 mm - Schnittbreite 1300 mm - Schnitthöhe 90C 130 mm - Schnitthöhe 45C 90 mm - Sägeblatt 45C schwenkbar - max. Sägeblattdurchmesser 400 mm - Durchmesser Ritzsägeblatt 120 x 20 mm - Drehzahl Hauptsägeblatt 3000/4000/5000 Upm. - Drehzahl Ritzsägeblatt 8000 Upm. - Motor 5,5 kW / 400 V - Motor Vorritzer 0,75 PS - Schiebetischprofil Breite 430 mm - Grauguss Maschinentisch 548 x 896 mm - Tischverlängerung 320 x 830 mm - Tischverbreiterung 890 x 950 mm - Absaugstutzen 1 x 120 , 1 x 80 mm - Abmessungen L=3200, B=3500, H=1500 mm - Gewicht 1100 kg Inklusive: - Ein-/Aus-Schalter am Sägewagen - Sägewagen mit wartungsarmer Rundstangenführung - motorische Höhenverstellung - motorische Schwenkverstellung mit digitaler Anzeige - motorische Breitenverstellung mit digitaler Anzeige - Bedienpaneel in Augenhöhe mit Vorlagenhalter,schwenkbar - Längenanschla ...

Technische Daten: - min./max. Sägebandbreite 15 - 200 mm - Zahnteilung 5 - 60 mm - Zahnhöhe max. 30 mm - Zahnformen PV, NV, KV - Spanwinkel - 10C / + 30C - Blattstärke 0,6 - 3,2 mm - Vorschubgeschwindigkeit 0-30 Zähne / min. (Drehzahlgeregelt über Potentiometer) - Schleifscheiben Durchmesser 200 mm - Schleifscheiben Bohrung Durchmesser 20 mm - Schleifscheinendicke 10 mm - Drehzahl stufenlos einstellbar 1400 - 4500 Upm - Spannung 400 V / 50 Hz - Gesamtanschluß 1,2 kW - automatisches präzises Schleifen - Wasserkühlung - Mikroprocessor Steuerung - 24 V Steuerpaneel - 8 Stufen Drehzahlgeregelte Vorschubgeschwindigkeit - THK - Linearführungen - integrierte Maschinenbeleuchtung - Abmessungen L=800, B=1200, H=1750 mm - Gewicht 600 kg

Technische Daten: - min./max. Sägebandbreite 15 - 250 mm - Zahnteilung 0 - 60 mm - zahnhöhe max. 25 mm - Zahnformen PV, NV, KV, SB - Spanwinkel - 10C / + 30C - Blattstärke 0,6 - 3,2 mm - Vorschubgeschwindigkeit 12/90 Zähne / min.(8 Stufen Drehzahlgeregelt) - Schleifscheiben Durchmesser 200 mm - Schleifscheiben Bohrung Durchmesser 20 mm - Schleifscheinendicke 10 mm - Drehzahl stufenlos einstellbar 1400 - 4500 Upm - Spannung 400 V / 50 Hz - Gesamtanschluß 1,5 kW - automatisches präzises Schleifen - Schutzkabine - Wasserkühlung - Mikroprocessor Steuerung - 24 V Steuerpaneel - 8 Stufen Drehzahlgeregelte Vorschubgeschwindigkeit - THK - Linearführungen - integrierte Maschinenbeleuchtung - Abmessungen L=1000, B=1500, H=1800 mm - Gewicht 600 kg

Table Type Boring Machine STANKO Model: 2A620 Technical Details: Spindle diameter: 90 mm Planning shield diameter: 630 mm Table working area: 1120 mm x 1250 mm Max table travel: Longitudinal: 1000 mm Transverse: 1250 mm Max headstock vertical travel: 1000 mm Spindle travel: 710 mm Spinle taper: 7: 24 Number of spindle speeds: 23 Main motor power: 10 kW Machine dimensions: Length: 6770 mm Width: 3900 mm Height: 3100 mm Net weight: 16000 T

UNION Model: BFT 90/3 Manufacturer: UNION - Germany Model: BFT 90/3 Year of manufacture: 1982 Condition: very good, complete, no broken or missing parts Technical details: Spindle diameter: 90 mm Spindle taper: Morse'a 5 Working surface: 1400 x 1250 mm X axis travel: 1600 mm Y axis travel: 1250 mm Z axis travel: 1475 mm W axis travel: 710 mm Max. load on table: 2500 kg Installed power: 23 kW Machine weight: 9300 kg

Tool cabinet for bending tools / exhibition object suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg - for AMADA/Promecam tools -extendable drawers, allows double-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated -side fork rails for transport by forklift (cavity under the cabinet) -the drawers run on roller slide rails ( serve as additional stabilization) -the cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Fachbreite usable 130mm - Technical depth usable 980mm - Number of intermediate boeden: 3 stueck

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Tool cabinet for bending tools suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allows the two-sided access to the tools -any adjustment of the inserting -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) Cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: compartment hhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Tray width usable 130mm - Depth usable 980mm - Number of intermediate boeden: 3 stueck

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Technische Daten: - max. Arbeitsbreite 950 mm - min. / max. Durchlasshöhe 2 / 160 mm - min. Werkstücklänge 420 mm - Schleifbandabmessungen 980 x 2200 mm Schleifaggregat: - Kombiaggregat Walze / Schuh - gummierte und gerillte Kalibrierwalze 70 sh - Durchmesser Kalibrierwalze 120 mm - Motor 15 kW - Schleifbandgeschwindigkeit 18 m/s - Motor Vorschub 1,5 kW - Motor Höhenverstellung 0,37 kW - Gesamtleistung 16,87 kW - Spannung 400 V / 50 Hz - Druckluft 8 bar - automatische Teppichzentrierung - automatische Stern-Dreieck Schaltung - pneumatisch Bandspannung - Überdicken-Sicherung mit Selbstauslösung - Ampermeter zur Überwachung der Spanabnahme - Sofort-Stop mit Scheibenbremse bei Störung - pneumatische Schleifbandreinigung - Absaugstutzen 2 x 120 mm, 2 x 100 mm - Absaugvolumen 3500 m3/h - Abmessungen L=1780, B=1760, H=2080 mm - Gewicht 1700 kg

Collar shelving used, 4.20 m x 1.20 m condition very good, no content 4 shelf stand unilaterally 4200 mm high -usable foot and arm depth 1200 mm -Holes for the arm fixation all 100 mm -with 12 height-adjustable standard rack arms (3 PCs per rack) -Load capacity at load Centre 600 mm -750 kg each arm / 2250 kg per stand -Wheelbase with longitudinal and diagonal associations: 1.30 m / length shelf number approximately 4.00 m -all parts galvanized -including all screws and nuts, without ground anchor.

Collar shelving used, 4.70 m x 1.20 m condition very good, no content -4 shelf stand unilaterally 4700 mm high -usable foot and arm depth 1200 mm -Holes for the arm fixation all 100 mm -with 12 height-adjustable standard rack arms (3 PCs per rack) -Load capacity at load Centre 600 mm -900 kg each arm / 2700 kg per stand -Wheelbase with longitudinal and diagonal associations: 1.30 m / length shelf number approximately 4.00 m -all parts galvanized -including all screws and nuts, without ground anchor. The shelf is available in stock in stock and within 4-12 working days. Freight charges please enquire. Pickup is also possible in 32339 Espelkamp. Phone: 05743-933770 Email: info@bruckamp.de For questions we are gladly available.

Spindle diameter 120 mm X-axis 1200 mm Y axis 1200 mm Z axis 600 mm W axis 1000 mm Table load 6000 kg

Collar shelving used, 4.20 m x 1.20 m condition very good, no content -4 shelf stand double-sided 4200 mm high -usable foot and arm depth 1200 mm -Holes for the arm fixation all 100 mm -with 24 height-adjustable standard rack arms (3 PCs per rack page) -Load capacity at load Centre 600 mm -750 kg each arm / 2250 kg per stand side -Wheelbase with longitudinal and diagonal associations: 1.30 m / length shelf number approximately 4.00 m -all parts galvanized -including all screws and nuts, without ground anchor. The shelf is available in stock in stock and within 4-12 working days. Freight charges please enquire. Pickup is also possible in 32339 Espelkamp. Phone: 05743-933770 Email: info@bruckamp.de For questions we are gladly available.

Collar shelving needed, 4.70 m x 1.20 m, state very well, without content -4 shelf stand double-sided 4700 mm high -usable foot and arm depth 1200 mm -Holes for the arm fixation all 100 mm -with 24 height-adjustable standard rack arms (3 PCs per rack page) -Load capacity at load Centre 600 mm -900 kg each arm / 2700 kg per stand side -Wheelbase with longitudinal and diagonal associations: 1.30 m / length shelf number approximately 4.00 m -all parts galvanized -including all screws and nuts, without ground anchor. The shelf is available in stock in stock and within 4-12 working days. Freight charges please enquire. Pickup is also possible in 32339 Espelkamp. Phone: 05743-933770 Email: info@bruckamp.de For questions we are gladly available.

100 lfm shelf shepherd type R3000 Ne- and used goods, see pictures Height 2.5 m Depth 40 cm Load/fold 150 kg Field width 128 cm Negotiation price: € 6,220,-- net from stock Offer consists of: 78 pcs stand or frame, 2.5 m, galvanized new 462 pcs. shelves, 150 kg load/compartment, galvanized used 26 St. Cross Associations for Stiffening 6 levels per field (several are of course possible at an extra cost) Field width also available in 100 cm! Goods are in stock. Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, or ...

25 lfm shelf shepherd type R3000 Ne- and used goods, see pictures Height 2.5 m Depth 40 cm Load/fold 150 kg Field width 128 cm Negotiation price: € 1,560,-- net from stock Offer consists of: 20 pcs stand or frame, 2.5 m, galvanized new 114 pcs. shelves, 150 kg load/compartment, galvanized used 7 St. Cross Associations for Stiffening 6 levels per field (several are of course possible at an extra cost) Field width also available in 100 cm! Goods are in stock. Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, or o ...

Drilling capacity in steel/GG: 23 mm spindle retainer: 2 MK projection: 300 mm table size: 300 x 300 mm Quill stroke: 100 mm spindle speeds: 190-1500 rpm drive motor: 380 V, 0.5/0.75 kW space: 410 x 670 x 1950 mm weight: 180 kg

Drilling capacity in steel/GG: 50/60 mm spindle retainer: 5 MK projection: 400 mm table size: 700 x 600 mm Quill stroke: 275 mm spindle speeds: 32-1030 rpm feeds: 4: 0.1 ? 0.4 mm drive motor: 380 V, 2.2/3.7 kW space: 700 x 1200 x 2700 mm weight: 1240 kg

STILMAS pure steam generator - type PSG 3OO DTS - produce saturated dry pyrogen-free pure Steam by using industrial steam as heating fluid. Pure steam DN 50 PN 16 Sampling discharge: ½” Triclamp Industrial steam DN 40 PN 16 Condensate discharge: DN 25 PN 16 Cooling water outlet: ½” Triclamp Safety valve: DN 40 PN 16 Cooling water inlet: ½” gas M. Electric line 380 V/50 Hz Compressed air 6 bar Main components: A) E 020 DOUBLE TUBE SHEET EXCHANGER - Construction in AISI 316 - ISPESL tested - Design pressure: shell side 10 bar – tube side 6 bar B) ER 020 EVAPORATION CHAMBER AISI 316 L construction ISPESL tested - Design pressure: 6 bar C) SUPPORT FRAME Painted carbon steel construction D) FEEDWATER PUMP P 020 AISI 316 stainless steel construction Type GRUNDFOS CRN 2 – 70 ( See Annex n° 24) E) SAFETY VALVE PSV 020 - SN - AISI 316 STAINLESS STEEL CO ...

Table clamping surface: 500 x 1600 mm table movement x: 1220 mm table movement y: 500 mm table movement z: 500 mm spindle retainer: SK 50 spindle speeds: 56-2800 rpm feeds longitudinal & cross: 10-1800 mm / min feed vertically: 2.5-450 mm / min. Supply: 400 V, 16 kVA kW space: 2000 x 2250 x 2150 mm weight: 4500 kg

Drilling capacity: 40 mm tool holder: MK 4 speed (spindle): 90-1455 K rpm projection: 320 mm drilling table swivel: +/-50° distance spindle to table maximum: 590 mm distance spindle to base plate: 1155 mm column diameter: 120 mm table size: 505 x 425 mm worktop base plate: 360 x 370 mm motor power: 1.0 / 1.5 kW machine dimensions (W x D x H): 500 x 930 x 1870 mm weight approx.: 450 kg Accessories: - Chuck Dorn MK 4 / B 18 - coolant system - digital speed display - keyless drill Chuck 1-16 mm / B 18 - reduction sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 - halogen lamp - automatic tool ejector - protective cover

Spindle: MK 3 Dauerbohrleistung: 25 mm standard ALB ear performance: 30 mm of thread cutting performance: M 20 depth: 125 mm projection: distance 260 mm spindle/table: 90 to 840 mm table surface: 500 x 365 mm column diameter: 110 mm overall height: 1,855 mm weight: 250 kg motor pole shift bar: 0.8/1.5 kW spindle speeds continuously variable range: 80 - 1440 min-1 range: 180 - 3,200 RPM digital display for speed as standard.

Dauerbohrleistung in St 60: 15 mm standard ALB ear performance: 18 mm thread cutting performance: M 8 spindle: MK 2 drilling depth: 80 mm projection: 180 mm spindle speeds of stepless 200 - 4,000 rpm spindle speeds threads 200-700 rpm distance spindle/table: up to 380 mm tabletop: 250 x 220 mm column diameter: 65 mm total height: 910 mm weight: 80 kg three-phase motor frequency controlled: 1,1 kW with full thread cutting device and programmable digital display

Dauerbohrleistung in St 60: 18 mm standard ALB ear performance: 20 mm thread cutting performance: M 12 spindle: MK 2 drilling depth: 100 mm projection: 225 mm from spindle/table: 55 up 880 mm table area: 450 x 315 mm column diameter: 90 mm overall height: 1,745 mm weight: 170 kg frequency-controlled three-phase motor: 1.5 kW spindle speeds continuously variable range: 100 - 2,000 rpm range: 200 - 4,000 min-1 digital display for speed as standard.

Dauerbohrleistung in St 60: 35 mm standard ALB ear power: 40 mm thread cutting performance: M 30 spindle: MK 4 feed adjustable: 20-400 mm / min drilling depth programmable: 175 mm projection: 300 mm spindle/table: 70-830 mm surface: 550 x 400 mm column diameter: 120 mm total height: 1,980 mm weight: 450 kg motor pole shift bar: 1.5 / 3.0 kW spindle speeds continuously variable range: 120-2,500 rpm spindle speeds stepless area B: 60-1,200 RPM

Kragarmregal, one-sided, 3.70m height, 1.20m arms, 500kg per arm - new product - : Price from location incl. loading! 1 shelf unit with 4 stands 1.655.-€ (net)! Price transport within D (without islands): 325.-€ (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: Shelf stand on one side approx. 3,700mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at load centre 600 mm 500 kg per arm / 2,700 kg per stand at 4 stands per arm level 4 x 500 kg = 2,000 kg with longitudinal and diagonal bandages e = 1300 mm, standard is 1.30m – so if they do not give any different information, we deliver the shelf with an axle distance of 1.30m. Other axle distances possible e.B. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 ...