typ used for sale

Single piece loading dimensions: 400 x 600 x 200 mm (box 50 pcs) Auction-ID: A7-51355-1035

Detailed manual attached Loading dimensions: 600x200x200 mm Auction-ID: A7-51355-1023

Detailed manual attached Loading dimensions: 600x200x200 mm Auction-ID: A7-51355-1018

Single piece loading dimensions: 400 x 600 x 200 mm (box 50 pcs) Auction-ID: A7-51355-1028

Detailed manual attached Loading dimensions: 600 x 410 x 210 mm Auction-ID: A7-51355-1003

Westeria conveyor belt type BFV AA approx. 11.6 m x GB 1,160 (1,200) mm Conveyor belt center distance approx. 11.6 m x belt width 1,160 (1,200) mm Year of manufacture 2007 Belt with carrier, troughed without drive divisible  operational condition Sale against bid from location D - Saxony-Anhalt Code No. Q40

Diameter 800mm Height 145mm Total height 225mm Short cone size 8 Bolt circle 235mm Passage 130mm Condition: untested Auction-ID: A7-51438-639

Westeria conveyor belt type BMF I AA approx. 12.7 m x GB 710 (800) mm Conveyor belt center distance approx. 12.7 m x belt width 710 (800) mm Year of manufacture 2007 smooth belt + good guide  E-motor 4 kW + gearbox operational condition  Sale against bid from location D - Saxony-Anhalt Code No. Q36

Load capacity 16000 kg Length 6000 mm Width 2000 mm Height 730 mm Rear axle: rigid Front axle: steerable Wheel diameter 400 mm Machine weight approx. 3.5 t Dimensions L x W x H 6.65 x 2.0 x 0.75 m Condition: functional Auction-ID: A7-51438-490

Column drilling machine with: - Feed via handwheel - Spindle speeds via belt drive Drilling capacity in steel 32 mm Projection 300 mm Drilling stroke 140 mm Holder MK 3 Table size 380 x 360 mm Feeds via handwheel Speed 85 - 1100 rpm Total power requirement 1.3 KW Machine weight approx. 0.27 t Dimensions L x W x H 0.95 x 0.6 x 1.92 m Condition: untested Auction-ID: A7-51438-590

Manual underfloor aluminium circular saw saw blade diameter 400 mm Cutting range at 90 degrees: around 120 mm Speed 1400 / 2800 rpm Motor power 4.0 kW Machine weight approx. 180 kg Dimensions L x W x H 1.0 x 0.9 x 1.2 m Condition: functional Auction-ID: A7-51438-419

Jaw width 160mm Jaw height 50mm Wingspan 305mm see pictures Condition: unchecked Auction-ID: A7-51438-656

Drilling and milling machine (demonstration machine) with - Cross support - Feed via hand crank- Chip protection - 16mm Drill chuck - Mechanical MK tool clamping Drilling capacity in steel 16 mm Projection 180 mm Drilling stroke 85 mm Spindle holder MK 2 Spindle diameter 47 mm Spindle speeds 320 - 3300 rpm Table adjustment transverse 230 mm Table adjustment longitudinal 100 mm Table clamping surface 420 x 155 mm Connection voltage 230 V Total power requirement 0.75 kW Condition: never used / new (5) Auction-ID: A7-51438-563

Deep hole drilling machine incl. 3 pcs. wood drill bit diameter 34mm holder MK2 support table 2100mm drill lengths 1100mm workpiece clamping cylinder see pictures Condition: functional Auction-ID: A7-51438-609

bore capacity in steel (diameter): 35 - 40 mm throat: 320 mm bore stroke: 180 - 200 mm tool adaptor: MK 4 dimensions: 750 x 900 x 1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Screw ø 75-36D; approx. 660 kg/h Co Extruder Year 2015

Key data: 40 mm, 28

Werner & Pfleiderer ZSK 40 twin-screw extruder – very good condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin screw extruder. Technical data: - Screw diameter: 40 mm - Screw length: 7 housing x 4 D, approx. 28 L/D - Main drive: 34.5 kW - Engine speed: 1,800 rpm - Screw speed: 40-400 1/min - Max. torque per worm shaft: 325 Nm - Electric heating: approx. 17 kW - Cooling: Water cooling unit - Temperature control zones: 6 - Housing temperature measuring points: 6 - Material temperature measuring point: 1 - Material pressure measuring point: 1 Housing configuration: - Inlet housing with liquid addition opening - Open housing with insert and two liquid addition ports - Several closed housings with holes for liquid addition or measuring points - Degassing housing Co-rotating, densely interlocking and self-cleaning screws. High mixing and di ...

Key data: 83 mm

Twin screw extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly serviced. Technical details: - Model: ZSK 83 - Screw system: co-rotating twin screws - Engine power: 46 kW - Cylinder: water-cooled - Degassing zone: present - Dosage: included (as in the pictures) - Replacement screw elements: available - Control / control cabinet: good condition, fully functional The plant is ideal for compounding, masterbatch, recycling, polymer and filler applications. The extruder has been overhauled if necessary and has been technically tested. On-site inspection and test run possible by arrangement. Transport worldwide possible. Further photos, data sheets and videos are available.

Key data: 30 mm

Twin Screw Extruder / Laboratory Extruder - 2 x 30 mm screw diameter - 4 heating zones - Dosage - Control Used machine, fully functional.

Modern whirlpool built-in oven, type FXHPS. The device is in almost mint condition, has been checked and is fully functional. • Electric built-in oven • Various baking, grilling and heating functions • Elegant dark finish • Intuitive operation • Easy-care cooking chamber • Connected load: approx. 3.65 kW • Voltage: 220–240 V, 50 Hz • Standard built-in dimensions for modern kitchens An attractive and powerful built-in oven for everyday use. Auction-ID: A1-51488-92

Key data: 2200 mm, 1500 mm, 1000 mm

Description, subject to prior sale. CNC 5-axis gantry milling machine with high dynamics Manufacturer: Parpas Type: Diamond linear Year of manufacture: 2013, Acceptance: 2014 Control: Heidenhain iTNC530 X (longitudinal travel): 2200 mm (+330) Y (transverse travel): 1500 mm (+330) Z (vertical travel): 1000 mm Distance between uprights: 2700 mm Max. distance between table surface and spindle tip with mounted milling head 1220 mm Linear axis feed speed: X and Y axis 0-60 m/min Z-axis 0-40 m/min Table surface: 2300 x 1600 mm Max. weight with optimal distribution: 6000 Kg/m2 T-slots 22 mm, distance between T-slots 200 mm. 5-axis orthogonal milling head with electrospindle Max. spindle speed 20,000 min-1 Spindle cone HSK 63 A A-axis ±105° (torque 830 Nm), C-axis ± 370° (torque 1200 Nm) 42 Stations Tool Changer Tool holder HSK 63A-100 Max. tool∅ 80mm  ...

Sintering furnace used in dental prosthesis laboratories Good working condition and cosmetics Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. An exhibition beforehand is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the price of the packing is integrated into the sale price. For shipping, you can have your transport pass or go through the carrier JMA express, or ask us for a shipping quote by Fedex. See General Terms and Conditions of Sale Auction-ID: A1- ...

Pallet of 120 toys – All types – New Pallet composed of 120 new toys of all types. Important information – to be read before bidding Goods from end-of-series and surplus, sold as is. The information in this description (quantities, capacities, dates, composition) is communicated by the seller. The photos, quantities, dimensions and weights are not contractual. The appearance of the packaging and products may vary from one item to another. Lot with variable content: the exact composition, number and condition of each item are not detailed; packaging may vary from one item to another. A visit is strongly recommended before bidding. The buyer bids with full knowledge of the facts and remains solely responsible for his or her appreciation of the lot. Auction-ID: A1-51086-167

LS - X is a heavy-duty benchtop shaker designed for continuous work THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-51527-146

The Precisa 520 PT scale offers optimal accuracy with a reading accuracy of 0.1 mg and a maximum capacity of 120 g Auction-ID: A1-51527-127

Pallets of 500 to 800 bazaar items per pallet – All types – New Pallets consisting of 500 to 800 new bazaar items of all types per pallet. Food items that have passed their minimum durability date may be included. Important information – read before bidding End-of-series and surplus goods, sold as is. The information in this description (quantities, capacities, dates, composition) is provided by the seller. Photos, quantities, dimensions and weights are not contractual. The appearance of packaging and products may vary from one item to another. Lot with variable content: the exact composition, number and condition of each item are not detailed; packaging may vary from one item to another. Foodstuffs: the dates (BBD) are those indicated by the seller. The buyer checks the condition of the products before any consumption or resale and complies with the applicable regulations ...

The Leica CM1900 is a fast-cutting cryostat for advanced diagnostics in histology and clinical histopathology. Reliable results in just a few minutes! THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-51527-180

Pallets of 500 to 800 bazaar items per pallet – All types – New Pallets consisting of 500 to 800 new bazaar items of all types per pallet. Food items that have passed their minimum durability date may be included. Important information – read before bidding End-of-series and surplus goods, sold as is. The information in this description (quantities, capacities, dates, composition) is provided by the seller. Photos, quantities, dimensions and weights are not contractual. The appearance of packaging and products may vary from one item to another. Lot with variable content: the exact composition, number and condition of each item are not detailed; packaging may vary from one item to another. Foodstuffs: the dates (BBD) are those indicated by the seller. The buyer checks the condition of the products before any consumption or resale and complies with the applicable regulations ...

Amersham Typhoon Laser Scanner Platform Designed for Versatile Imaging and Accurate Quantization of Fluorescent, Colorimetric and Radiolabeled Nucleic Acids THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-51527-16

Small automatic/cam lathe with enclosed working area, bar/feed area and motorized unit. Used machine with visible wear; suitable for repair, parts or workshop use. Manufacturer/model and full specs to be confirmed. Auction-ID: A1-51153-39

THERMO SCIENTIFIC MULTISKAN SkyHigh Type 1550 Spectrophotometer UV/Vis microplate spectrophotometer designed to be convenient and easy to use for virtually any photometric research application, especially DNA, RNA, and protein analysis, as well as turbidity measurements Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. A prior exhibition is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the price of the packing is integrated into the sale price. For shipping, ...

A charge amplifier converts electrical load signals into low-impedance voltage signals for accurate measurement and analysis THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-51527-176

Precisa Analytical Balance max capacity 220 g accuracy from 0.1 mg Auction-ID: A1-51527-162

Pallets of 500 to 800 bazaar items per pallet – All types – New Pallets consisting of 500 to 800 new bazaar items of all types per pallet. Food items that have passed their minimum durability date may be included. Important information – read before bidding End-of-series and surplus goods, sold as is. The information in this description (quantities, capacities, dates, composition) is provided by the seller. Photos, quantities, dimensions and weights are not contractual. The appearance of packaging and products may vary from one item to another. Lot with variable content: the exact composition, number and condition of each item are not detailed; packaging may vary from one item to another. Foodstuffs: the dates (BBD) are those indicated by the seller. The buyer checks the condition of the products before any consumption or resale and complies with the applicable regulations ...

Pallets of 500 to 800 bazaar items per pallet – All types – New Pallets consisting of 500 to 800 new bazaar items of all types per pallet. Food items that have passed their minimum durability date may be included. Important information – read before bidding End-of-series and surplus goods, sold as is. The information in this description (quantities, capacities, dates, composition) is provided by the seller. Photos, quantities, dimensions and weights are not contractual. The appearance of packaging and products may vary from one item to another. Lot with variable content: the exact composition, number and condition of each item are not detailed; packaging may vary from one item to another. Foodstuffs: the dates (BBD) are those indicated by the seller. The buyer checks the condition of the products before any consumption or resale and complies with the applicable regulations ...

Easy-to-use instrument for photometric and turbidimetric applications, including DNA, RNA, and protein analyses, including endpoint, kinetic, and spectral analyses Auction-ID: A1-51527-57

Wolf Sanoclav Autoclave LaM-3-20-MCS-J. Capacity 20 L. Max. pressure: 3 bar. Max. temp: 143°C. External dimension 410x530 mm. THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-51527-1

Pallets of 500 to 800 bazaar items per pallet – All types – New Pallets consisting of 500 to 800 new bazaar items of all types per pallet. Food items that have passed their minimum durability date may be included. Important information – read before bidding End-of-series and surplus goods, sold as is. The information in this description (quantities, capacities, dates, composition) is provided by the seller. Photos, quantities, dimensions and weights are not contractual. The appearance of packaging and products may vary from one item to another. Lot with variable content: the exact composition, number and condition of each item are not detailed; packaging may vary from one item to another. Foodstuffs: the dates (BBD) are those indicated by the seller. The buyer checks the condition of the products before any consumption or resale and complies with the applicable regulations ...

Pallets of 500 to 800 bazaar items per pallet – All types – New Pallets consisting of 500 to 800 new bazaar items of all types per pallet. Food items that have passed their minimum durability date may be included. Important information – read before bidding End-of-series and surplus goods, sold as is. The information in this description (quantities, capacities, dates, composition) is provided by the seller. Photos, quantities, dimensions and weights are not contractual. The appearance of packaging and products may vary from one item to another. Lot with variable content: the exact composition, number and condition of each item are not detailed; packaging may vary from one item to another. Foodstuffs: the dates (BBD) are those indicated by the seller. The buyer checks the condition of the products before any consumption or resale and complies with the applicable regulations ...

Pallets of 500 to 800 bazaar items per pallet – All types – New Pallets consisting of 500 to 800 new bazaar items of all types per pallet. Food items that have passed their minimum durability date may be included. Important information – read before bidding End-of-series and surplus goods, sold as is. The information in this description (quantities, capacities, dates, composition) is provided by the seller. Photos, quantities, dimensions and weights are not contractual. The appearance of packaging and products may vary from one item to another. Lot with variable content: the exact composition, number and condition of each item are not detailed; packaging may vary from one item to another. Foodstuffs: the dates (BBD) are those indicated by the seller. The buyer checks the condition of the products before any consumption or resale and complies with the applicable regulations ...

EURO F2 – Universal Milling Machine Manufacturer EURO Model F2 Machine Type Conventional Milling Machine Milling Configuration Vertical Control System Manual / Conventional X-Axis Travel (Longitudinal) Approx. 800 mm Y-Axis Travel (Cross) Approx. 350 mm Z-Axis Travel (Vertical) Approx.450 mm Working Table Dimensions Approx. 1,200 × 300 mm Spindle Taper ISO 30 Spindle Speed Range Machine Weight Approx. 1,300 kg Auction-ID: A1-51153-49

bore capacity in steel (diameter): 40.0 / 50.0 mm throat: 320 mm bore stroke: 160 mm turning speeds: 70 - 4000 U/min table:: 770 x 760 mm T-slots: 3x 14 x 112 mm table height: 780 mm distance spindle /table: 988 / 304 mm bore spindles - Morse Taper: 4 Kurzspindel MK feed: 0.1-0.2-0.3-0.4 mm/U column diameter: 145 mm engine output: 1.5 / 2.4 kW weight: 315 kg Current new price approx. 20.000 euros Special price upon request Features: - Robust pillar drilling machine Drive: V-belt – VARIO system Height-adjustable drill head Constant table height - Automatic spindle feed With electromagnetic feed clutch And electrical control via the feed handle 4 feed rates: 0.1–0.2–0.3–0.4 mm/rev - Infinitely variable speed adjustment With digital speed display - Multi-speed (pole-changing) drive motor - Clockwise rotation of the drill spindle - Coolant system with a separate tank - 1x ma ...

FEI - Quanta 200 MK2 Type FP 2012-13 Scanning Electron Microscope The microscope is mainly used for manual topographic and chemical analysis of iron alloys, ores, dusts, and slag. Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. A prior exhibition is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the price of the packing is integrated into the sale price. For shipping, you can have your transport pass or go through the carrier JMA express, or ask us for a s ...

Pallets of 500 to 800 bazaar items per pallet – All types – New Pallets consisting of 500 to 800 new bazaar items of all types per pallet. Food items that have passed their minimum durability date may be included. Important information – read before bidding End-of-series and surplus goods, sold as is. The information in this description (quantities, capacities, dates, composition) is provided by the seller. Photos, quantities, dimensions and weights are not contractual. The appearance of packaging and products may vary from one item to another. Lot with variable content: the exact composition, number and condition of each item are not detailed; packaging may vary from one item to another. Foodstuffs: the dates (BBD) are those indicated by the seller. The buyer checks the condition of the products before any consumption or resale and complies with the applicable regulations ...

MECAPACK traysealer, type: Q² 2500 HSK, serial number: O08757, year of construction: 2020, 400 V, 3 Ph, 6 A, 16 kW, dye: 225 mm x 200 mm, film width: 460 mm, total dimensions: 4400 mm x 1300 mm x 2100 mm. Including outfeed belt, plastic belt, belt width: 460 mm, total dimensions: 1550 mm x 740 mm x 1180 mm and pallet with parts. Dye is incomplete.

Koppens belt fryer, type: BR 4500/600, machine number: 1219, year of construction: 1998, 400 V, 3 Ph, 50 Hz, 27 A, 13 kW, s/s belt, belt width: 600 mm, frying length: 4500 mm, total dimensions: 7620 mm x 1620 mm x 1880 mm. Including pallet wiht s/s belt, belt width: 600 mm and s/s switch cabinet, dimensions switch cabinet: 800 mm x 500 mm x 1700 mm. Without transport rollies.

Cabinplant rotating filling machine, type: Rotation filler, number: 7395-03, year of construction: 1998, 400 V, 3 Ph, 50 Hz, 8/30/50 A, s/s infeed bunker, plastic belt, belt width: 800 mm, total dimensions: 2200 mm x 1140 mm x 650 mm, s/s vibrating gutter with plastic outfeed belt, belt width: 740 mm, total dimensions: 2100 mm x 700 mm x 280 mm, s/s rotating station, dye: Ø 50 mm, clearance: 340 mm x 360 mm, total dimensions: Ø 2300 mm x 1800 mm, rotating station, dye: 130 mm, plastic belt, belt width: 120 mm, transport belt with s/s belt, belt width: 120 mm, total dimensions: 7700 mm x 5000 mm x 3600 mm. Including 3 pallets with parts.

Avercon packaging machine, type: WRAP AROUND/TRAY PACKER, number: 663, year of construction: 2009, 380 V, 3 Ph, 50 Hz, 25 A, clearance denester: 480 mm x 560 mm, belt with dividers, clearance belt: 350 mm x 290 mm, plastic rollers, roller width: 550 mm, total dimensions: 4100 mm x 2700 mm x 2420 mm. Product: Apple sirup, 2 types of trays: 350 gram, Ø 94 mm, height: 82 mm, speed: 80 pcs / minute and 450 gram, Ø 94 mm, height: 103 mm, speed: 80 pcs/minute,

GEA Food Solutions Germany GmbH thermoformer, type: PowerPak, serial number: 70600106, year of construction: 2018, 400 V, 3 Ph, 50 Hz, 42 A, 28 kW, film width: 600 mm, dimensions dye: 555 mm x 380 mm, GEA TiroLabel labelling unit, Busch vacuum pump, type: RA 0160 D 5Z1 QLXX, capacity: 160 m³ per hour, total dimensions: 10400 mm x 1550 mm x 2080 mm. Including pallet with extra parts and transport beams.

Multivac thermoformer, type: R085, serial number: 312009, year of construction: 2021, 415 V, 3 Ph, 50 Hz, 24 A, 7 kW, distance between chains: 420 mm, dimensions dye: 375 mm x 250 mm, plastic outfeed roller, roller width: 380 mm, Multivac vacuum pump, type: MRP150, serial number: 2112777, year of construction: 2021, capacity: 106/127 m³ per hour, total dimensions: 3840 mm x 1100 mm x 1700 mm. Including pallet with parts and tools, dimensions dyes: (2x) 250 mm x 180 mm.