typ used for sale

Manufacturer: Frenostat Bremsgerät Typ 2000 Hilger und Kern, Type: 400/60/3132000, Model: 137700,

Crane arm for forkliftWeight 220 KGApplicable lifting force: 2500 KGAload: 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CATERPILLAR/ MWM type TCG 2020 V12 -> 0.999 MWe. The engine and generator are fully operational. Engine mileage - approximately 33000h. Year of manufacture 2015; fuel: natural gas / biogas Generator: Manufacturer MARELLI MOTORI SP. A type MJB 500 MB4; CODE MJB5042K33380; No. MC 16586; year of manufacture 2015. Control cabinet complete with panel. Engine taken out of service with the customer in August 2022 due to the purchase of a new one. The engine has no visible signs of leakage. If interested, I can send a real -film on WhatsAp.

JENBACHER TYPE 4 Heat Exchangers Charge Air Coolers Intercoolers J414 / J416 / J420 PNo:1202340

JENBACHER TYPE 3 Heat Exchangers Charge Air Coolers Intercoolers 6141424 / 1212197 / 369829

JENBACHER TYPE 4 J414 / J416 / J420 PNo: 1202340

General SKU283X1422 MakeTyphoon No.98TY0219 Year of construction1998 Mounted on framecheck Main Features MaterialStainless steel Motor0.9 KW Length870 mm Specified Features - Stirrer Stirrercheck Shaft length870 mm Without stirring headcheck Motor0,30/0,90 kW 400 V 960/2890 rpm Speed mixing shaft233—700 / 1166—3500 rpm Adjustable heightcheck MaterialStainless steel 1.4552 Information LocationBarneveld Mounted on wheelscheck With switchcheck Floorspace1,20 x 1,10 m Total height1,85 m Weight200 kg CEcheckStirrersTyphoonMixers > StirrersBrand > Typhoon What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Sell granulator for plastic strands of extrusion. 7,5 kW power. Sale, clearance there. If it works, I don't know, therefore the reasonable sale price.

Key data: 1067 KW

we are looking for a Jenbacher 3 1067 kw we have a biogas plant

Bij het mengen van vloeistoffen spreken we van homogenisatie of blending wanneer twee niet (volledig) gelijke vloeistoffen worden gemengd met als doel een homogeen mengsel te verkrijgen. De moleculen van de ene stof worden dan volledig gelijkmatig verdeeld in de andere stof en concentratie- en temperatuurverschillen worden volledig geëgaliseerd. Bij dit proces is de mengtijd van belang, dat wil zeggen de tijd die nodig is om de concentratie- of temperatuurverschillen tot een bepaald niveau te reduceren.

This 7-axis Star SR-20J type C Swiss Type Turning was manufactured in 2015. It features a maximum machining diameter of 32mm, headstock stroke of 310mm, and spindle speeds up to 7,000rpm. Equipped with a Hydrajet BF20-2000 high-pressure coolant system and an Absolent A.Mist 10S mist extraction unit, the Star SR-20J type C represents a robust addition to any machining setup. Contact us for further details regarding this Swiss Type Turning.

This Star SR 20 J Type C was manufactured in 2011. It features a max turning diameter of 20 mm, spindle speeds up to 8,000 rpm, and a spindle power of 2.2 kW. The machine includes six fixed turning tool positions and five radial motorized tools. Ideal for precision Swiss-type turning, it has a compact footprint of 2.20 × 1.20 m. Contact us for more information about this machine.

VHM shank cutter from Garant (20 3160 - 20) lightly used, DIN 6527, type N, D= 20 mm number of teeth - 8, ask also for other quantities from the cutters. Price for 10 pieces 240,-€ for 1 piece 25,- €

Handheld control unit Schleicher type HGB 2P-0301 for Battenfeld

The roll slitter type RKS is well suited for slitting narrow rolls of micro-finishing films, tape qualities as well as light abrasive materials with a roll width up to 620 mm., SWISS QUALITY MANUFACTURING, Roll width up to 320 mm and 620 mm., Unwind station for rolls up to ø750 mm., Shear cut knife system on knife shafts consisting of upper and lower knife., Variable speed drive up to 100 m/min., Rewind station for rolls up to ø500 mm., For light abrasive materials like micro-finishing films, tapes and other special qualities., Unwind station:, Unwind station for rolls up to ø750 mm., Unwinding with pneumatically expandable unwind shaft for cores with ø75 mm., Pneumatically adjustable unwind brake., Cutting system:, Shear cut knife system on knife shafts consisting of upper and lower knife for fast change of cutting width., Rewind station:, Rewind station for rolls up to ø500 mm., R ...

Stock Laminating machine, Type: 134R5-1500 P, Year 2001, Max.Size: 1420x1620 mm, Min.Size: 500 x 500 mm, Printers sheet:, Paper from about 180 g/m², Carton from about 400 g/m², Carrier sheet:, corrugated cardboard up to about 7.0 mm thickness, Cardboard/Chipboard from 0.6 mm

This 7-axis STAR MICRONICS SR-32JII-typeA was manufactured in 2017. It features a bar capacity of Ø32 mm and includes a main spindle and sub-spindle with C axis. The machine is equipped with a synchronized guide bushing and a gang tool plate with 6 positions. If you are looking to get high-quality turning capabilities, consider the STAR MICRONICS SR-32JII-typeA swiss type turning machine we have for sale. Contact us for further details.

Cantilever racks SPECIFICATIONS Mast height: 4000 mm (blue) Truss length: 1200 mm or 1200+1200 mm (orange) Item 1 05 Supports 10 trusses Grid/round POSTS 2 07 Supports 14 trusses Grid/round Item 3 11 Double-sided supports (re-li) 44 trusses Grid/round Base 2600 x 30 x 30 mm Item 4 17 double-sided supports (re-li) 68 trusses Crossbars Base 2600 x 30 x 30 mm

Pallet lift table for industrial and Euro pallets, lifts whole pallets of frozen blocks to an ergonomic working height, enabling quick and injury-free operation for the machine operator., Pallet lift table for industrial and Euro pallets, Load capacity: 1,000 kg, Dimensions / weight: L x B x H: 1.850x1.230x2.180 mm, Weight: 520 kg

GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mRapid feed X / Y / Z36/36/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...

Key data: 16 mm, 275 mm, 160 mm

Solid Inratirea Column Drilling Machine, Type G-16 Ready to use. technically flawless, except for the cover of the motor fan (Replacement can be provided with purchase) Details: Machine Type: Column Drilling Machine Make: Infratirea Type: G16 Year of construction: 1975 Control Type: Conventional Country of origin: Romania Freight base: from the Neubrandenburg location, freely loaded Location: 17034 Neubrandenburg Price: € 1650,00 net Technical details Drilling capacity in steel (diameter): 16 mm Projection: 275 mm Drilling stroke: 160 mm Spindle speeds - infinitely variable: 150 - 2360 / 9 step rpm Spindle holder MK: 3 Distance spindle/table max.: max: 580 / min: 100 mm Feed rate: 0.10 - 0.16 - 0.25 - 0.40 mm/rev Table clamping surface: 300 x 400 mm Table adjustable: vertical 360 mm Table swivel approx.: rotatable 360° Clamping surface of the base p ...

Chip Conveyor, Chip Conveyor Belt, Coolant Cleaning, Chip Disposal, Scraper Conveyor, Scraper Conveyor, Chip Chain Conveyor, Hinge Belt Conveyor, Scraper Belt Conveyor – Subject to change – Manufacturer: RUEZ GmbH Type: Chip Conveyor, Scraper Conveyor Year of Make: 2002 TYPE: KF0WW2/306 DAS Conveyor belt width: 310 mm -Outlet height: 1300 mm -Total dimensions: L:4.370/W310/H1.820 mm -Total weight: approx. 800 kg Drive: Manufacturer: Getriebefabrik Cowig GmbH TYPE: SSMAH63 11-362.7 B3 TYPE: Worm Gear Specifications: Gear ratio(s2): 3.82 min-1. Torque (T): 337 Nm. Weight (m): 28 kg

1 -Teste revisionate in permuta dell'usato serie 3 Jenbacher- reUp exchange cylinder head (overhauled) type 3 Jenbacher. Jenbacher cod. REM9016986 In this case you will have to return the used cylinder head to us. If your cylinder head cannot be overhauled, you will have to pay us €1000.00 for failure to exchange goods. 2 -Teste revisionate senza permuta dell'usato serie 3 - NO EXCHANGE cylinder head (overhauled) type 3 Jenbacher. REM9016986 In this case you will not have to return the used cylinder head to us. EMAIL: sales@punto4srl.com administration@punto4srl 1 -Teste revisionate in permuta dell'usato serie 3 Jenbacher- reUp exchange cylinder head (overhauled) type 3 Jenbacher. Jenbacher cod. REM9016986 In questo caso dovrai restituirci la testata usata. Se la testa del cilindro non può essere revisionata, dovrai pagarci €1000,00 per la mancata sostituzione dell ...

MATEC forklift blades are robust and easy to build and can be attached to almost any commercial lyklift. With a fuse bolt, the tilting device can be blocked for special inserts. The front shutter flap can be mounted on any shovel. The interchangeable scraper is suitable for planing work such as removing ice, repelling soil, gravel or feed, etc. - Bucket width 1950 mm - Bucket depth type 1: 1000 mm, shovel depth type 2: 1330 mm - Bucket height without attachment 450 mm - Weight approx. 220 kg - Payload 2000 kg - Steel sheet 4 mm industrial lypainted - Fork shoes axle distance 800 mm - Fork tine width max. 170 mm - Fork thickness max. 60 mm - 4 lifting eyelets for krange slopes - Tilting device for cable pull with lifter and spring reset, securing bolt Options at extra cost: - Type 2 shovel depth 1330 mm Total price € 1590.00 - Front shutter € 590.00 - hydr. Liftin ...

STILMAS pure steam generator - type PSG 3OO DTS - produce saturated dry pyrogen-free pure Steam by using industrial steam as heating fluid. Pure steam DN 50 PN 16 Sampling discharge: ½” Triclamp Industrial steam DN 40 PN 16 Condensate discharge: DN 25 PN 16 Cooling water outlet: ½” Triclamp Safety valve: DN 40 PN 16 Cooling water inlet: ½” gas M. Electric line 380 V/50 Hz Compressed air 6 bar Main components: A) E 020 DOUBLE TUBE SHEET EXCHANGER - Construction in AISI 316 - ISPESL tested - Design pressure: shell side 10 bar – tube side 6 bar B) ER 020 EVAPORATION CHAMBER AISI 316 L construction ISPESL tested - Design pressure: 6 bar C) SUPPORT FRAME Painted carbon steel construction D) FEEDWATER PUMP P 020 AISI 316 stainless steel construction Type GRUNDFOS CRN 2 – 70 ( See Annex n° 24) E) SAFETY VALVE PSV 020 - SN - AISI 316 STAINLESS STEEL CO ...

Re circulation pump, used Horizontal type NPR 500 system KÖSTER Manufacturer Ritz Atro Built in 1992 Temperature of pumped liquid of 40 ° C Flow 240 l / s Pumping height 1.00 m Power 3 kW Pump speed 480 min Direction of rotation of the impeller left TMU submersible motor drive type Performance of the drive machine 4 kW Installation type horizontal Sufenzahl 1 Axial impeller shape Number of propeller blades 5 adjustable More info and photos on request.

Casing holder device ALPINA type DOE9 Manufacturer: Alpina Type: DOE 9 Supply: 400 V Casing holder device ALPINA type DOE9 Ask for offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-BiaÅ?a USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter wiba.com.pl

Jenbacher Type 4 J412 Jenbacher Type 4 J416 Jenbacher Type 4 J420 Orginal Part Number 1202340

General Electric Power Jenbacher Type 3 J312 General Electric Power Jenbacher Type 3 J316 General Electric Power Jenbacher Type 3 J320 Orginal Part Number 6141424 / 1212197 / 369829

Stock No. 2590k 1 used compounding pelletizing line, throughput up to 1200 kg/h depending on material, consisting of: 1x Grav. Dosing system 5-component SITECOM incl. control 1x Extruder twin screw THEYSOHN type TSK 90 Screws 2x Ø 90 mm – 36 LD synchronization Segment screw and barrel, water / medium cooled Screw speed up to 300 rpm-1 Extruder drive 255 kW-DC 1x side dosing extruder TSD 75 twin screw with drive 3 kW 3x degassing openings 1x melt filter No. 1 type K –HS- Y with sieve 176 mm, incl hydraulic 1x melt pump with drive 22 kW 1x meelt filter No.2 type K-SWE 180 RS back-flush self-cleaning incl. hydraulic 1x strand head with 32 x Ø3.5 mm holes 1x strand cooling pool 620 x 5000 mm 1x string granulator SG 300, drive 11 kW Screen control ResoTec / control cabinet Visit / demonstration at short notice by arrangement. Further compounding lines and access ...

Key data: 40 mm, 315 mm, 200 mm

Solid column drilling machine of the brand WMW, model BS 25 B Mk4 Ready to use. Technically flawless Machine Type: Column Drilling Machine Make: WMW Saalfeld Type: BS 25 B Year of construction: 1962 Control Type: Conventional Freight base: ex-site, freely loaded Location: 17034 Neubrandenburg Shipping time: immediately Price: 2.250,00 net Technical details Drilling performance in steel (diameter): 6 - 40 mm Projection: 315 mm Drilling stroke: 200 mm Headstock adjustment: 280 mm Spindle speeds - infinitely variable: 63...1000 rpm Spindle mount MK: MK 4 Feed: 0.08...1.2 rpm Clamping surface table L x W: 700 x 600 mm Clamping surface of the base plate: 440 x 490 mm Distance Spindle / Base Plate: 1100 mm Total Power Requirement: 2.61 kW Machine weight approx.: 1000 kg Dimensions machine approx. LxWxH: L:1010 x 700 x 235 ...

GeneralVertical machining center in C-frame-design New DMG MORI Design Direct Measuring system X,Y,Z; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Cross520 mmLongitudinal650 mmVertical475 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 TableTable surface 960 x 570 mmMaximum load (table centre) 800 KgSlot width 14 mmNumber of Slots 5Distance between T-Slots 100 mmSpindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Tool magazine 60 pockets HSK-A63Tool magazine 60 pockets HSK-A63 Chain magazine with pockets and with double gripper, incl. manually direct t ...

This 8-axis Tornos-Bechler Deco 20a was manufactured in 2002. A Swiss type turning machine featuring a max turning diameter of 20mm, equipped with a Fanuc control system, motorized tools, main and sub-spindle, and a ROBOBAR SSF automatic bar loader. Includes tool holders and collets. A great opportunity to buy this Tornos-Bechler Deco 20a Swiss type turning machine. Contact us for further details regarding this Swiss type turning machine.

This 4-axis Citizen K16 VIP swiss type turning machine was manufactured in 2005. It features a max machining diameter of 16 mm, with spindle speeds up to 15,000 rpm on the main spindle and 10,000 rpm on the sub-spindle. Ideal for precision work, it supports a variety of tooling options. A great opportunity to buy this Citizen K16 VIP swiss type turning machine. For more information about this swiss type turning machine, please reach out to us.

GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsTable surface900 x 560 mmDimensions (L x W x H)3,03 x 3,49 x 2,94 (5,8 x 5,5 x2,94) mMovement X / Y / Z600/560/510 mmRapid feed X / Y / Z30/30/30 m/minSpindle taperSK 40 DIN 69871 Tool Magazine with60 PositionsMax. torque82 NmTorque (100% DC)54 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmMaximum load (table centre)600 KgWeight approx.5300 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the hProduction Package 40 barProduction Package 40 bar Optio ...

Wire rope diameter to be used: 4.0 - 5.0 mm https://reutlinger.de/de/typ-50-sv-iii https://reutlinger.de/de/typ-50-sv-iii/item/drahtseilhalter-typ-50-sv- iii-ring-integral-schwarz Auction-ID: A1-45889-2534

Pallet with electrical installation material Mennekes type flail, various CE plugs + type 13523 and sockets type 14523, controls for ceiling cranes ABUS, clamp cable connectors Auction-ID: A7-45960-43

Karl Schnell grinder, type: 445R, serial number: 24349, year of construction: 2007, 400 V, 3 Ph, 50 Hz, 280 A, 150 kW, plate diameter: 400 mm, total dimensions grinder: 3500 mm x 3500 mm x 3500 mm. Karl Schnell elevating belt, type: 638, serial number: 14151, year of construction: 2007, 400 V, 3 Ph, 50 Hz, 2.8 A, 1.1 kW, s/s chain belt with dividers, distance between dividers: 1030 mm, divider height: 200 mm, elevating height: 3300 mm, total dimensions: 5300 mm x 1300 mm x 3500 mm. Nimo KG elevator for pallet boxes, type: SK 800 MK-S, serial number: 10548, year of construction: 2007, maximum load: 800 kg, clearance: 1000 mm x 870 mm, elevating height: 2580 mm, total dimensions: 2060 mm x 2300 mm x 4400 mm, including switch cabinet, dimensions: 1210 mm x 440 mm x 1960 mm, and tool trolley, dimensions: 1200 mm x 700 mm x 1350 mm.

We are here to provide an L type automatic sealing machine, which is widely used in a variety of industries due to various reasons. Our machine is available in a variety of specifications. A loading and cooling zone is supplied as standard output. A heat-resistant, powder-coated carrier was used. It is very easy to install and easy to use. Conveyor roller made of stainless steel and silicone coated. Power-coated tunnel covers for heavy duty and an electrical control panel are included. Capacity: 50 pieces/min Voltage 380V/50-60Hz/3-phase Main Material: Stainless Steel The internal circuit type is suitable for PVC. PP. POF packaging material. Extra-long shrink tunnel, intelligent temperature controller with figure and closing heat wind inner circuits.

Te Coop: Westfalia Centrifugaalpomp type MZB 10 6 fans. Seal on watercooling op flens 1 P11 96 PD 6 bar. Machine no. 1713-935 Max type 1700 rotation/minFlender ATB-Loher Electorpomp ANGa 132MB 06D 4 KW 220 / 380 V 16/9.3 A

Vertical -consol milling machine, used    Vertical -milling machine, used Make/make: WMW HECKERT Type/ model: FQS 400 Year built: 1978 Control type / control: conventional   x-way: 1190 mm   y-way: 530 mm z-way: 540 mm Table size/ table: 1600 x 400 mm Spindle power/ spindle power: 11kW Tool holder/tool taper: ISO 50 Speeds/ speeds: 28 - 1400 rpm Feeds: 16- 800 mm/min Total power requirement: 21 kW Machine weight: 4.8 t  

Stock# U2308-7 Used stainless steel contact parts polish made V type tumbling blender with total volume 4500 l. Working volume 3000 l. Mixer has two inspection/feeding inlets with bolted lids, each with diameter 450 mm. Central conical discharge with diameter 245 mm, with manually operated valve. There is an internal supporting shaft/baffle inside the mixing chamber. Machine is driven by el. motor 18.5 kW, 1480 rpm, 380 V, 50 hz, through belts and gearbox type WD650. Working rotation of mixing chamber up to 8 rpm. Supporting frames and operating platform designed in carbon steel. Includes technical documentation.

Kragarm regal, double-sided, 3.50m height, 1.20m arms, 750kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 stands 1.900.-€ (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelf racks double-sided approx. 3.50m high, hot-dip galvanized IPE 160 / 100 with 2x3 adjustable each. Arms 1.20 m, 750kg load capacity per arm with dressings approx. 1.30 m Shelf stand on two sides approx. 3500mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at load centre 600 mm 750 kg per arm / 2250kg per stand side with longitudinal and diagonal bandages e = 1300 mm, standard is 1.30m – so if they do not give any different information, we deliver the shelf with an axle distance of 1.30m. Other axle distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dime ...

Manufacturer | Manufacturer: Chemnitzer Maschinenbau GmbH Chemnitz Type | Type: CMB 16 Pinole Lift | Quill stroke: 120 mm Speed (infinitely variable) | speed (stepless): 460 - 1840 rpm ; 140 - 560 rpm Dimensions table | Table dimensions: 280 x 360 mm Adjustment range table | Adjustment travel table: 540 mm Recording | Holder: MK 2 Connected load | Connection Value: 0.8 kW Total weight | Total Weight: 350 kg

Multivac top and bottom labelling machine, type: L310, machine number: 260232, year of construction: 2018, 230 V, 50 Hz, type labelling units: (2x) LD200, plastic belt, belt width: 290 mm, total dimensions: 1800 mm x 1100 mm x 1880 mm.

GeneralVertical machining center in C-frame-design New DMG MORI Design Direct Measuring system X,Y,Z; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Longitudinal650 mmCross520 mmVertical475 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools30 TableTable surface 960 x 570 mmMaximum load (table centre) 800 KgSlot width 14 mmNumber of Slots 5Distance between T-Slots 100 mmSpindle speed 15,000 rpm, 200 NmMotor spindle speedMASTER® SK 40 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle) BIG-PLUS® tools possibleTool magazine 30 pockets SK40Tool magazine 30 pockets SK40 Chain magazine with pockets and with double gripper,  ...

1. Qty. 1 Second-hand slab gas fired pit type furnace Manufacturer: Tehnika Set Type: Gas heated (2 Zones) Built: 2001 Stopped: 2019 Power: 110kW Number of heating units: 8 Dim.: 2622 5084 x 6294 mm – H x W x L Inner dimension per zone: LxWxH – 380026001635 mm Load weight max. / 2 zones: 42.000 kg Max. Slab number per zone: 5 Slab length: 3000 mm Voltage supply: 380 V, 50 Hz Compressed air: 5 bar Max. Temp.: 630 °C

2. Qty. 9 Second-hand slab pit type furnaces Mfc.: Ebner Type: Electrical heated Built: 1970 Stopped: 2019 Power: 600 kW Number of heating units: 5 Weight capacity: 20.000 kg Voltage supply: 380 V, 50 Hz Compressed air: 5 bar Max. temperature: 650 °C Slab number: 7 slabs; 8 slabs, if the width 700 - 800 mm and 10 slabs, if the width 700 mm Slab length: Max. 3300 mm (in furnaces 1 to 5) and Max. 3000 (in furnaces 6 to 9) DIMENSIONS (outer): 2000 x 2580 x 4080 mm – H x W xL