typ used for sale

Thermohydrograph WILHELM LAMBRECHT Type 252

Rühle VR1 packaging machine, tray sealer, with 2 different sealing tools, for tray sizes 187x137mm and 325x265mm (1/2 GN), including 4 boxes with trays 187x137x83mm Year of manufacture 2016, very little used, approx. 60 operating hours, Dimensions WxDxH 65x72x172cm, connection 230V, very good used condition, fully functional

Can filler Leibinger Type Canvasa Capacity: approx. 1.000 cph set up for standard cans - can type: 211 / 202 without can table with Siemens S 7 control system Counter pressure filling technology O2 Pickup: 10-60 ppb The machine has the footprint of a standard Euro pallet. The Canvas is a compact, semi-automatic can filling machine. Suitable for carbonated and still drinks. The filler is still in production in a brewery until July 2026 and can be inspected during production.

This TORNOS DECO 2000-10 was manufactured in 1999. It features a loading magazine with drum, integrated hydraulic unit, and supports both front and rear with a center height of 1100 mm. It includes a movable headstock, directional spindle stop, and cross slide with tool holders. Ideal for precision turning, it operates on AC drive motors with an absolute measuring system. Contact us for more information about this machine.

Thermohydrograph WILHELM LAMBRECHT Type 252

This TORNOS DECO 2000 swiss type turning machine was manufactured in 2000. It features a movable headstock, directional spindle stop, and cross slides with tool holders. Includes an independent counter spindle, lubrication device, and a loading magazine with drum. Equipped with a HYBRIDE 10+5 drum for bars up to 10 mm and an integrated hydraulic unit. Contact us for more information about this machine.

Thermohydrograph WILHELM LAMBRECHT Type 252

This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. The machine includes a Robobar SSF 3m loading magazine and a FANUC 16i-TB control system, ensuring precise and efficient operations. Ideal for intricate Swiss-type turning tasks. Contact us for more information about this machine.

Thermohydrograph WILHELM LAMBRECHT Type 252

This 7-axis TSUGAMI BS32CE-V was manufactured in 2008. It features a maximum turning diameter of 32 mm and a turning length of 250 mm. The machine is equipped with two spindles, offering main spindle speeds of 200 – 7000 rpm and sub-spindle speeds of 200 – 6000 rpm. If you are looking to get high-quality turning capabilities, consider the TSUGAMI BS32CE-V swiss type turning machine we have for sale. Contact us for further details.

Swiss type turning machine manufactured in 2006. This TORNOS DECO 10a features an automatic and integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. It includes a Robobar SSF 3m loading magazine and is equipped with a FANUC 16i-TB control system. If you are looking to get high-quality turning capabilities, consider the TORNOS DECO 10a machine we have for sale. Contact us for further details.

Swiss type turning machine manufactured in 2000. This TORNOS Deco 10a features a movable headstock, independent counter spindle, and a pivoting workpiece holder. It includes a loading magazine with a drum and a lubrication device for guide bushing. If you are looking to get high-quality turning capabilities, consider the TORNOS Deco 10a machine we have for sale. Contact us for further details.

Universal Dishwasher / Hood Type WasherProduct DescriptionManufacturer: HobartModel: UXTLH-10NByear of construction: 2015400V 50Hz 3N 21.6kW 35.1AMaterial: Stainless Steel Digital Control3 ProgramsCondition: Baker's ConditionDetails see pictures

Stretch wrapper Robopac type Helix HS40 with rotating arm speed: 45 - 50 pallets/hour voltage: 400 V top sheet cover insertion possible delivery without pallet transport and safety fencing

Inv. Num. : 9019 Type: W 100 A Producer: TOS Generated: Parameters: Work table length: 1250 mm Work table width: 1250 mm X-axis travel: 1600 mm Y-axis travel: 1120 mm Travel travel Z-axis: 1250 mm

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)Tropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperatureSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

Drilling Ø to: 30 mm Spindle holder: MK 3 Quill stroke: 120 mm Table clamping surface: 335 x335 mm Table swivels horizontally: 360° Table adjustment via hand crank approx.: 550 mm Largest distance between table and drilling quill: 550 mm Largest distance between machined base plate and drill quill approx.: 1120 mm 12 spindle speeds: 160 - 930 rpm Drive motor: 380 V, approx. 0.8/1.3 kW Space requirement: 900 x 470 x 1780 mm

High Speed Bench Drill, Made in Germany -Clamping table: 290 x 225 mm -Travel distance: 150 mm with hand crank -Spindle mount: Drill chuck included -Drilling capacity in steel D 1 - 6 mm -Projection: 180 mm -Speeds: 900 - 10,000 rpm 8 steps -Column: Diameter 75 mm -Spindle stroke: 60 mm, with fine stop -Voltage: 380 V -Dimensions: 640/330/H740 mm -Weight: 92 kg

Column drilling machine ALZMETALL ALZSTAR 30/S Year of Make: 2012 Drilling capacity in steel 30 mm Threading in ST 60 M16 Clamping surface table 514 mm x 360 mm Guard Drilling depth 140 mm Spindle mount MK 3 Spindle speeds 225 rpm – 4300 rpm infinitely variable with digital display Drill Table Lighting 1 drill chuck up to 13 mm Machine vise

GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Cross420 mmLongitudinal700 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWClamping System ISO 7388-3 - JD30Spindle taper BT 30Speed range 20 - 15000 rpmTorque (40% DC) 48 NmTorque (100% DC) 41 NmDrive power (40% DC) 8,5 kWToolchangertoolchangerType of magazine WheelNumber of tools 25Integrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Rotary joint, 4-channels Inclusive Software packageProduction package band filter ICS 40b ...

CONTROLS   CNC controls TRAUB TX8I-S BASIC FUNCTIONS   number of spindles: 2   number of c-axes: 2 WORKING RANGE TURNING   turning diameter (max): 20 mm   bar diameter (max): 20 mm MAIN SPINDLE   spindle revolutions (max): 10000 /min   c-axis: yes COUNTER SPINDLE   spindle revolutions (max): 10000 /min   c-axis: yes ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz ATTACHMENTS (TURNING)   chip conveyor: yes   through spindle coolant attachment: yes   hydraulic system: yes   European CE standards: yes - Interchangeable operation: Can be used as a short- or long-turning lathe Equipment: Number of axes: 12 (15) - Main spindle C - Sub-spindle D20 with X/Z/C axes - Upper tool gantry with X/Y/Z/H/B axes and 8 tool ho ...

Key data: 72 mm, 28 , 50 U/min

Parallel twin screw extruder Cincinnati ARGOS 72R-28D Output capacity: max. 400 kg/h (depending on material and processing conditions) Power main drive: 47 kW (AC motor) Screw diameter: 72 mm, L/D = 28 Screw speed: max. 50 rpm Screw geometry for u-PVC pipe or technical profiles Original screws and barrels in very good condition 12 x Tool heating zones 3-ph/5-pin CEE 32A/10.5 kW 1 x adapter heating zone 1-ph/5-pin CEE 32A/5.5 kW 13 x TC Type J 16 mm Tuchel C70B 3-pin 4 m Incl. mass pressure and temperature sensor Successor interface: Interface 1 (analogue) and Can Open Bus 3 x Add on Plasticolor 0–10V Machine control Cincinnati EXc ProXP Horizontal conveyor incl. material hopper Total connected load: 184 kW Dimensions (L x W x H): 4,018 x 1,250 x 2,463 mm Weight: 4,700 kg Condition: used, overhauled & functionally tested

Quantity: about 190 pieces Type: HSK63 Status: Opportunity Set including numerous HSK63 tool holders, ER collet chucks, cutter holders, face heads, boring heads, adapters, cones and various accessories, presence of mounted carbide cutters, different diameters and lengths, storage in wooden crates Auction-ID: A1-44765-54

FLOTT SB 25 STV column drill press was built in 1991 in Germany by Arnz Flott GmbH Werkzeugmaschinen. This extremely efficient machine enables the drilling of precise holes with a maximum diameter of 25 mm in steel and a maximum diameter of 30 mm in cast iron. The machining process is performed by a work head with a reliable spindle, rotating at a maximum speed of 2000 rpm. As many as 6 spindle speed adjustment stages enable precise adjustment of the parameters to the type of workpiece. The work table, in turn, has height adjustment and can be fully rotated around the column. All this makes the FLOTT SB 25 pillar drill the perfect solution for production plants and workshops. The total weight of the machine is approximately 300 kg. Technical specifications of FLOTT SB 25 STV drilling machine - maximum drilling diameter (cast iron): 30 mm - maximum drilling diameter (steel): 25 mm - ...

Main extruder : KME 1-90-36R, main drive 255 kW Co Extruder Inner Layer : KME 45-30 Co Extruder Outer Layer: KME 45-36BR, New Screw Condition : good, straight from production. Compact design, 1 common control cabinet Note : 3-layer pipe head up to 315 mm available

Screw ø 75-36D; approx. 600 kg/h A.C. Engine 182.0 kW

Main extruder : KME 1-90-36R, main drive 255 kW Co Extruder Inner Layer : KME 45-30 Co Extruder Outer Layer: KME 45-36BR, New Screw Condition : good, straight from production. Compact design, 1 common control cabinet Note : 3-layer pipe head up to 315 mm available

Includes flags and carrying chest - excellent condition Auction-ID: A1-45485-16

Various pumps and control unit Transport size: about 3 pallets Auction-ID: A7-45181-44

Key data: 35 mm, 280 mm, 180 mm

Column drilling machine ALZMETALL AB 3 ES – Powerful & immediately ready for use For sale is a high-quality column drill from the renowned manufacturer Alzmetall, model AB 3 ES. The machine impresses with its robust design, precise operation and reliable performance. Ideally suited for workshop, metalworking and industrial applications. General information: Machine Type: Column Drilling Machine Manufacturer: Alzmetall Model: AB 3 ES Condition: Used, good general condition, fully functional Shipping time: Immediately available Technical data: Drilling capacity in steel: approx. 35 mm Projection: approx. 280 mm Drilling stroke: approx. 180 mm Recording: MK 3 Speed: Infinitely variable Table size: approx. 600 × 470 mm Equipment: • Drilling depth stop • Drill chuck Machine data: Dimensions (L × W × H): approx. 1200 × 800 × 2100 mm Weight:  ...

Mobile storage rack with 90 storage bins Dimensions of the red storage bins 9.5 x 16 x 9.5 cm. Dimensions of the blue storage bins 9.5 x 16 x 9.5 cm. Dimensions of the yellow storage bins 12 x 22 x 11.5 cm. Dimensions of the wheels 75 x 20 mm. Total dimensions 67 x 52 x 133 cm Condition: never used / new (5) Auction-ID: A1-45681-800

Machine vise with turntable. Jaw width 100 mm Clamping range 100 mm Clamping height 38 mm Weight 12 kg Dimensions L x W x H 260 x 140 x 120 mm Condition: never used / new (5) Auction-ID: A1-45681-865

Universal tool trolley with 6 storage locations. Overall dimensions 99 x 40 x 87 cm. Container dimensions. 26 x 40 x 16 cm. Inner dimensions container 23 x 35 x 15.5 cm. PP material (polypropylene) Equipped with four wheels, two castors with brakes. Condition: never used / new (5) Auction-ID: A1-45681-888

Shelf with 60 storage boxes. External dimensions of the boxes 100 x 295 x 105mm. Packaging dimensions 420 x 340 x 930mm. Weight approx. 30 kg. Storage spaces 60 boxes Weight 30 kg Dimensions L x D x H 780 x 320 x 1670mm Condition: never used / new (5) Auction-ID: A1-45681-729

Pallet sealing trays type FK 3000 H, manufacturer Dornburger Kunststofftechnik Material PP, size 300x120x115 mm approx. 3000 pieces Auction-ID: A7-45675-8

Dimensions of the containers 26 x 40 x 16 cm. Internal dimensions of the containers 23 x 35 x 15.5 cm. Thickness of the MDF top board 10 mm. PP material (polypropylene) Storage locations 12 boxes Condition: never used / new (5) Auction-ID: A1-45681-721

Dimensions of the containers 26 x 40 x 16 cm. Internal dimensions of the containers 23 x 35 x 15.5 cm. Thickness of the MDF top board 10 mm. PP material (polypropylene) Storage locations 12 boxes Condition: never used / new (5) Auction-ID: A1-45681-762

Pallet gusseted bags type poly bags, 1 pallet = 24 cartons each 250 pieces = 6000 pieces transparent, size 750x400x630 mm 35 my Auction-ID: A7-45675-48

BIZERBA scale type SC 800 with receipt printer and cash drawer max. 6 kg, min. 40 g Auction-ID: A7-45677-17

BIZERBA scale type SC 800 with receipt pressure, max. 6 kg, min. 40 g Auction-ID: A7-45677-20

Infrared folding thermometer type Testo 104-IR, measuring range -30 to +250 °C Auction-ID: A7-45677-41

BIZERBA scale type SC 800 with receipt pressure, max. 6 kg, min. 40 g Auction-ID: A7-45677-59

BIZERBA scale type SC 800 with receipt pressure, max. 6 kg, min. 40 g Auction-ID: A7-45677-58

BIZERBA scale type SC 800 with receipt pressure, max. 6 kg, min. 40 g Auction-ID: A7-45677-16

BIZERBA scale type SC 800 with receipt pressure, max. 6 kg, min. 40 g Auction-ID: A7-45677-70

BIZERBA scale type SC 800 with receipt pressure, max. 6 kg, min. 40 g Auction-ID: A7-45677-25

Infrared folding thermometer type Testo 104-IR, measuring range -30 to +250 °C Auction-ID: A7-45677-26

CONTROLS   CNC controls NUM 1060 M WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 2   X-axis travel: 3000 mm   Y-axis travel: 2010 mm   Z-axis travel: 2000 mm   rotating range A-axis from: 92.5 °   rotating range C-axis up to: 360 ° TABLE   table surface (left-right): 1450 mm   table surface (front-back): 1600 mm FLOOR PLATE   total weight approx.: 12000 kg SPINDLE / HEAD   spindle revolutions (max): 3000 /min   tool fixture: ISO SK 50   drive power: 37 kW AXIS DRIVES   traverse velocity X (max): 25000 mm/min   traverse velocity Y (max): 25000 mm/min   traverse velocity Z (max): 25000 mm/min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz ATTACHMENT ...

Air Nailer BEA W15 Type 358, max. 8 bar

Pneumatic Stapler BEA B15 Type 358, max. 8 bar