typ al 121 used for sale

Air Nailer BEA W15 Type 358, max. 8 bar

Pneumatic Stapler BEA B15 Type 358, max. 8 bar

Pneumatic Stapler BEA B15 Type 358, max. 8 bar

Wet stone cutting table CEDIMA or type designation

Wet stone cutting table CEDIMA or type designation, crack in the lowering arm

Working area 1Longitudinal700 mmCross420 mmVertical380 mmGeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWClamping System ISO 7388-3 - JD30Spindle taper BT 30Speed range 20 - 10000 rpmTorque (40% DC) 48 NmTorque (100% DC) 41 NmIntegrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Inclusive Software package Sinumerik Mdynamics 5-axRotary joint, 4 channelsRotary joint for integrated swivel rotary table with torque drives 4- channe ...

Bottle washing machine MAG Type Sirio 8 with 10 bottles per row capacity: 3.000 – 11.000 bph Year of manufacturing: 1990 suitable for 0,2 ltr. – 1,0 ltr. bottles The machine is available from December 2026.

Hand bending machine Flat bar max. 16 mm Square steel 16 mm Round steel 16 mm Weight 45 kg Bending angle max. 180 ° Dimensions L x W x H 0.4 x 0.4 x 1.1 m Auction-ID: A7-45761-892

Drill Grinder KAINDL Schleiftechnik Typ BSG20/2 Bj. 2021-012, S/N 22104, Benchtop Tool

Mobil-Leeb hardness tester SAUTER HMM Type D 2013, S/N HMM120000087, case

WITTMANN Tempro 2 Type TN2A3A1B00000100, S/N 100 temperature control unit

Temperature control unit HB-THERM Series 4 type HB-100U1 built in 2008, S/N 810-5700, max. 30 kW

Temperature Control Unit HB-THERM Series 4 Type HB-100U1 Year 2007, S/N 712-2053

This 6-axis TORNOS Deco 13 b was manufactured in 2004. It features a maximum bar diameter of 13 mm and a spindle speed range of 100 – 12,000 rpm. The machine includes a linear tool system with 6 tool positions and full machining capabilities for turning, drilling, tapping, and threading. If you are looking to get high-quality turning capabilities, consider the TORNOS Deco 13 b Swiss Type Lathe we have for sale. Contact us for further details.

This 5-axis SACHMAN TS10 bed type milling machine was manufactured in 2025. It features an impressive X-axis travel of 2,500 mm, Y-axis travel of 1,210 mm, and Z-axis travel of 1,200 mm. The machine includes a robust table size of 2,700 x 800 mm and a maximum table load capacity of 3,000 kg. If you are looking to get high-quality milling capabilities, consider the SACHMAN TS10 machine we have for sale. Contact us for further details.

This 3-axis TIGER TFA6 Bed Type Milling Machine was manufactured in 1998. It features a longitudinal travel of 2000 mm, transversal travel of 1000 mm, and vertical travel of 1000 mm. The machine is equipped with a Heidenhain TNC 426 CNC, a manual bi-rotary head, and a chip conveyor. If you are looking to get high-quality milling capabilities, consider the TIGER TFA6 machine we have for sale. Contact us for further details.

This 3-axis DEBER BTM 5A was manufactured in 2000. It features a continuous rotary table with a size of 1,500 x 1,000 mm and a maximum spindle speed of 3,000 rpm. The machine is equipped with a twin-spindle head and an automatic tool changer, enhancing its operational efficiency. If you are looking to get high-quality honing capabilities, consider the DEBER BTM 5A horizontal honing machine we have for sale. Contact us for further details.

This 3-axis Soraluce TA-20 bed type milling machine was manufactured in 2005. It features a substantial table size of 2,000 x 800 mm with a maximum table load of 4,000 kg. The machine offers impressive X-axis travel of 2,000 mm and rapid traverse speeds of 25,000 mm/min. If you are looking to get high-quality milling capabilities, consider the Soraluce TA-20 machine we have for sale. Contact us for further details.

This 3-axis Soraluce TA-A20 bed type milling machine was manufactured in 2005. It features a longitudinal traverse of 2,000 mm, a cross traverse of 1,000 mm, and a vertical traverse of 800 mm. The machine is equipped with an automatic indexing head and a spindle speed range of 20 to 4,000 rpm. If you are looking to get high-quality milling capabilities, consider the Soraluce TA-A20 machine we have for sale. Contact us for further details.

Bluthardt, VRB 6/20 Drilling machine with coordinate table, with digital display DRO- 3 axis , Year of manufacture: 1980, very good condition, can be viewed under power Mounts SK40, quick-change system, incl. mounts MK2, MK3, MK4 , Spindle : 45 - 900 rpm , 3,4KW, right - counterclockwise rotation, Stroke: 200mm, upper part adjustment electr. 500mm Radius : 500, Coordinate table: Clamping surface 600x400m, X-660, Y-450mm To be visited under power!

PROTEIN MACHINE TYPE MICROPLATE READER BIO-TEK 800 TS Absorbance Reader with Gen5RC 1 Unit Detection modes: Absorbance Microplate types:6- to 384-well plates Temperature control: To 50 °C (I” configuration) Read speed:11 secs /96 wells (sweep mode) Brand: BioTek With Computer UPS 1.0KVA CONTACT INFORMATION (Ms) Supawadee Kumpone - Toy Manager, Procurement Mobile#: +6693-7478585 Email: supawadeegreatglove.com (Ms) Wilawan Sakulsongboonsiri Mobile#: +6689-1969222 Email: wilawan_sakultopglove.com

Stake pallets FEIL Mobibloc type EE payload 1,500 kg built in 2021, stacking factor 4 times 1 + 3 = tube length 1,200 mm, 12 pcs., without contents

Temperature control unit E. BRAUN Control type BT9W, 400 V/50 Hz, 6/9 kW heating, year 1998, S/N possibly 2471 (difficult to read), internal No. 056

Temperature control unit HB-THERM Series 4 type HB-100U1, S/N 810-5699, max. 30 kW

Temperature control unit HB-THERM Series 4 type HB-100U1, year 2007

WITTMANN TP-BA:90 Type TP1A3A1L00000300, YOC 2006, S/N 0000093138

Hard stone measuring table NOVALITH hard stone type C 1,200x800x160 mm, year 11/87, S/N 36136, weight 460 kg, flatness up to 10 my, target 22 my, next test 2/24

For sale is an extensive lot of fiber optic cables on wooden and metal drums. Details: • Cable type, among others: • Blowing MT 12 PE 192 (16x12) G.657.A1 1600N 8.4 mm (DIN VDE) • Blowing MT 12 PE 96 (8x12) G.657.A1 1800N 6.3 mm (DIN) • Micro Cable FO 12F 250μm G.657A1 HDPE 3.8 mm • Standard: G.657.A1 (suitable for FTTH / fiber optic networks) • Condition: used / in stock, optically good condition (see pictures) • Storage: outdoors • Partly printed with lettering & technical specifications Quantities & lengths: • Different drums with lengths of approx. 350 m to 7,800 m per roll • Total scope according to the list: • approx. 192 cable: ~19,427 m • approx. 96 cable: ~32,125 m • Additional micro cables / house connection cables Areas of application: • Telecommunications / fiber optic expansion (FTTH / FTTB) • Network co ...

Please note; Without a scaffolding Auction-ID: A1-40105-105

Air conditioning compact unit EES type WPWG -LL- 32, compact unit room air conditioner with remote control, 220 V, cooling capacity 3200 W, heating power 3200 W Auction-ID: A7-45960-50

HS DIALOG Digital control Control: Dialog touch 12\" incl. two sonotrodes (1:2 and 1:0.4) incl. additional control Dialog touch 12\" Instruction manual available Auction-ID: A1-45977-13

Auction-ID: A1-45977-4

Pallet with electrical installation material Mennekes type flail, various CE plugs + type 13523 and sockets type 14523, controls for ceiling cranes ABUS, clamp cable connectors Auction-ID: A7-45960-43

GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Longitudinal350 mmCross420 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWTorque (100% DC) 41 NmTorque (40% DC) 48 NmSpeed range 20 - 15000 rpmSpindle taper BT 30Clamping System ISO 7388-3 - JD30ToolchangertoolchangerTableTable surface 740 x 420 mmNumber of tools 15Type of magazine WheelMaximum load (table centre) 400 KgPreparation NC-Devider EA510 indirectPreparation 4.th axis Lehmann EA 510.L indirect measuring System Attention: Customer specific optimisations and adjustments are not part of delivery!Chip removal package with chip conveyorChip removal package with chip conveyor conte ...

GeneralVertical Machining Centre; Control: 3D control Heidenhain iTNC 530 Technical DataFeed rate longitudinal/transverse/vertical1-90000/1-90000/1-90000 mm/minRapid traverse longitudinal/transverse/vertical90/90/90 m/minWorking area 1Longitudinal885 mmCross600 mmVertical600 mmMiscellaneousClamping SystemHSK-A 63 Colour Floor space/WeightDimensions (L x W x H)4,9 x 4,3 x 3,2 mWeight approx.12000 KgCabineFull protection cabinDMC 75 V linear in 5-axes-versionAdditional price DMC 75V linear in 5-axes-version - motion in X=885mm und Z=600mm - spindle speed up to 18.000rpm, - tool-taper HSK-A 63, - swiveling range B-axis +10° to -110°, - swiveling speed B-axis 50rpm, - max. torque 750Nm / 553ft/lbs - clampiTool magazine 150 pocketsTool magazine 150 pockets Tower type magazine Only available for HSK Tool holders. (differently from standard)Number of tools 150Preparation measuring probe TS640 ...

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)Tropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperatureSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Signal lamp with 4 colours standardSignal lamp with 4 colours Red: General error Yellow: Intervention necess ...

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque64 NmTorque (100% DC)43 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.10000 rpmWeight approx.5600 KgTropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperatureSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

Travel X/Y/Z: 1400mm/1000mm/1000mm, table dimensions X/Y: 1600mm/850mm, max. table load: 2500kg, speed: 4000rpm, spindle power: 22kW, feed: 20m/min, spindle taper: ISO50. Machine dimensions X/Y/Z: approx. 4300mm/2500mm/2600mm, weight: approx. 10000kg. An on-site inspection is possible.

NCT A3400 – CNC Milling Machine General data: Manufacturer: NCT Kft., Budapest Model: A3400 Year of manufacture: 2020 Serial number: P19075 Machine type: CNC machining center Condition: Unknown Technical details: Power: 22 kW Voltage: 400 V Current: 38.83 A CE marked: yes Equipment: Heidenhain DA 400 air preparation unit Enclosed working area CNC control panel Description: Modern CNC milling machine NCT A3400 designed for precision machining operations. The machine features a fully enclosed workspace, advanced control system, and integrated air preparation unit, making it suitable for industrial production environments requiring high accuracy and reliability. Auction-ID: A7-46004-1

Column Drill Knuth Type SSB 35X Technical data: - Power (kW): 2.4 - Voltage (V): 400 - Frequency: 50 Hz / 3 phases - Various drills and drill holders: included - CE

TPE rubber floor mats for different types of vehicles approx. 100 complete sets, third-party manufacturer

Car carpets approx. 150 type sets complete for different car types on 8 pallets

This 3-axis Auerbach FBE 3000 Bed Type Milling Machine was manufactured in 2011. It features a robust clamping surface of 3100 x 800 mm, capable of handling a maximum table load of 10,000 kg. The machine is equipped with a multi-position milling head KFM 1, a tool holder SK 50, and offers a spindle power of 25 kW with speeds up to 4000 rpm. If you are looking to get high-quality milling capabilities, consider the Auerbach FBE 3000 machine we have for sale. Contact us for more information.

TNW Super Condor type 40 pillar drilling machine ; automatic version suitable for precise drilling work ; Voltage: 380 volts ; Speed: 60–1350 rpm ; Recording: MK-4 ; Extension: 350 mm ; Table size: 480 x 410 mm Auction-ID: A1-45170-24

Batch of industrial printed circuit boards / plug-in cards (PCB modules), various types Auction-ID: A1-46070-120

Absolutely new belt dryer make New Eco Tec Woody 500-100-1.0 SP, built in 2019. Very well preserved, as good as new facility. Immediately available. Suitable for drying fines up to 1.5 to/h. Input moisture up to 50%. Water evaporation up to 500 kg/h! Heating medium warm air 90°C to 110°C. Takeover possible immediately!

Key data: 130 mm

Stock# UG6397 Used line for WPC (wood plastic composite) acoustic panels production. Line had been working on acustic panels with width 600 mm x length up to 6 m. Maximal possible width up to 900 mm. Line consist of: - Twin screw, co-rotating extruder by Weber (D) model DS 13.27. Machine has twin screws, each with diameter 130 mm. Working length LD = 27. Extruder is driven by el. motor 145 kW. Barrel has 12 heating zones, each with el. heaters 5.5 kW. Includes Transi-Tec mixing and dosing device and unused spare barrel. - Calibrating table by Techno-Plast with 4 pcs of vacuum pumps (each power 4 kW) and one blower with power 1.1 kW. - Pull-off with a saw by Techno-Plast, driven with motor 5.7 kW - Profile collection table - Vacuum pump (Busch) - ONI water cooling exchanger Line new in 2010.

Servo motor ESDA 230V; dimension: 1050 x 490 x 1000mm; Auction-ID: A7-45992-133

\" Sheet metal testing device type 214 – built in 1988 – Made in GDR – with base frame Mechanical sheet metal testing device for material testing of sheet metal. Manufacturer: (Logo Klingenthal, GDR) Type: 214 Colour no.: 169 Year of manufacture: 1983 Origin: Made in GDR • Mechanical testing device with large handwheel • Adjustment scale on the handwheel (fine adjustment) • Analogue dial gauge display • Solid industrial design • Mounted on a stable steel base • Power supply is not used, typically used for testing sheet metal specimens (e.g. forming/bending testing). \" Auction-ID: A7-46417-304

CONTROLS   CNC controls NUM 1060 M WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 2   X-axis travel: 3000 mm   Y-axis travel: 2010 mm   Z-axis travel: 2000 mm   rotating range A-axis from: 92.5 °   rotating range C-axis up to: 360 ° TABLE   table surface (left-right): 1450 mm   table surface (front-back): 1600 mm FLOOR PLATE   total weight approx.: 12000 kg SPINDLE / HEAD   spindle revolutions (max): 3000 /min   tool fixture: ISO SK 50   drive power: 37 kW AXIS DRIVES   traverse velocity X (max): 25000 mm/min   traverse velocity Y (max): 25000 mm/min   traverse velocity Z (max): 25000 mm/min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz ATTACHMENTS   chip conveyor: yes   through spindle coolant attachment: yes