typ al 121 used for sale

416, 5507, KT557, 5509, TH955, 416-44, KT559 1 gearbox complete Auction-ID: A1-50849-553

Paguro 6000 used marine generator with Lombardini engine. Possible injector defective, engine smokes slightly. Engine starts and runs and supplies power Auction-ID: A1-47366-105

Engine completely overhauled (about 100 hours run afterwards) 1 hydraulic valve gives malfunction, equipped with valve block. Good tires. Equipped with extra work lighting all around. Auction-ID: A1-47394-7

Used Auction-ID: A1-50849-539

1 set of 4 pcs. Rim 24XDW14L IS 45 Profile: New Auction-ID: A1-50849-492

Rim 24XDW14L IS 45 Profile:20mm Auction-ID: A1-50849-500

Equipped with: front linkage, double-acting hydraulic valve front, top link front, work lights, beacon, front PTO, air suspension seat, pitonfix towbar (tipper knob), mudguard control, 4 x double-acting hydraulic valves rear, load sensing, air brake connection, sun visor Auction-ID: A1-47394-18

The aluminum telescopic ladder is a type of ladder that is structurally foldable and extendable, allowing you to adjust its length as needed. This means that it can be easily stored and transported in a more compact form. Auction-ID: A7-50796-274

Complete automation installation for the automatic application of rivets to aluminium profiles. The installation is made up of Siemens PLC control components and a frame made of Bosch aluminium profiles. The machine is equipped with an automatic sorting and feeding system for rivets. The installation is designed for processing aluminium profiles with a length of up to approximately 3,000 mm. Specifications: Application: automatic riveting on aluminum profiles Controller: Siemens PLC Construction: Bosch aluminum profiles Includes automatic rivet sorting and feeding system Maximum profile length: approx. 3,000 mm Weight: approx. 250 kg Connection voltage: 230 V Required: compressed air Auction-ID: A1-47366-294

The aluminum telescopic ladder is a type of ladder that is structurally foldable and extendable, allowing you to adjust its length as needed. This means that it can be easily stored and transported in a more compact form. Auction-ID: A7-50799-74

International 644 4WD – very rare and fully restored For the true enthusiast or collector we offer this beautiful and very rare International 644 4WD (Allrad). It is a unique example that is equipped with almost all available options from that time. This tractor is equipped with: Original Stoll/front loader Fritz Meyer Cabin Synchronous speed gearbox Power steering 4x4 / Allrad four-wheel drive Heavy lifting device A few years ago, this tractor was fully and professionally restored and it is still in a beautiful condition. The following has been carried out: Completely sandblasted and professionally repainted Electrical installation completely renewed New starter motor New alternator New battery New hydraulic pump and valves New hydraulic lines tractor&front loader New convertible roof Equipped with good tires all around New solid seat This International is not only tec ...

Manufacturer: Wilhelm Altendorf Model / Type: F45 Machine type: Sliding table saw / Format table saw Year of Make: 1979 Machine No.: 79-5-24 Manufacturer: Wilhelm Altendorf Maschinenbau, Minden / West Germany Design: stationary woodworking machine Sliding carriage: large aluminium format sliding carriage Stops: Rip fence and cross/angle fence available Table: large work table with table extensions Saw unit: Circular saw blade with adjustable saw unit Accessories: Boom/trimming table and stop system available Support roller: separate height-adjustable roller support available Suction connection: Suction hose / connection available Auction-ID: A1-50373-8014

7-level combi oven 600 x 400 mm Brand: Alto Shaam Model: 7.14 ML Power supply: Three-phase 3P+N+T (380-400V - 50Hz) Capacity: 7 pastry levels 600 x 400 mm Dimensions (W x D x H): 1030 x 1010 x 820 mm Weight: 184 kg Aesthetic aspect: Very satisfactory Used equipment sold as is, not refurbished and untested. Vesto reference: V1211 Auction-ID: A1-50906-167

Same Laser 150 VDT Start and drive well Front weights in the wheels Auction-ID: A3-46141-19417

AGILENT 1100 G1330B ALS Therm; ; The Agilent 1100 ALS Therm, G1330B controls the temperature of HPLCs or fraction collectors; ; Temperature range: 4° to 40°C; Ambient temperature: 4° to 40°C; Dimensions: 140 x 345 x 435 mm; Line voltage: 100-120 or 220-240 VAC; Line frequency: 50/60 Hz; ; Internal reference: FA-265; Auction-ID: A1-50994-1045

Rim 20X11 IS 0 1 set of 4 pcs. Profile:15mm Auction-ID: A1-50849-653

AGILENT 1100 G1330B ALS Therm; ; The Agilent 1100 ALS Therm, G1330B controls the temperature of HPLCs or fraction collectors; ; Temperature range: 4° to 40°C; Ambient temperature: 4° to 40°C; Dimensions: 140 x 345 x 435 mm; Line voltage: 100-120 or 220-240 VAC; Line frequency: 50/60 Hz; ; Internal reference: FA-265; Auction-ID: A1-50994-1046

AGILENT 1100 G1330B ALS Therm; ; The Agilent 1100 ALS Therm, G1330B controls the temperature of HPLCs or fraction collectors; ; Temperature range: 4° to 40°C; Ambient temperature: 4° to 40°C; Dimensions: 140 x 345 x 435 mm; Line voltage: 100-120 or 220-240 VAC; Line frequency: 50/60 Hz; ; Internal reference: FA-265; Auction-ID: A1-50994-1044

Dutch car describe buyer's costs or Export by name 100 euros or Export with insurance and license plates for two weeks 250 euros gay konet left makes some noise Auction-ID: A3-46101-5101

Dimensions approximately: length 40cm, width 18cm and height 30cm Oil-lubricated rotary vane vacuum pump Air-cooled electric motor Integrated oil mist separator Robust base plate Maintenance-friendly design Auction-ID: A1-51071-22

Fatigue testing machine max. bending moment: ±12Nm alternating max. bending moment: 24Nm swelling, 3 different measuring springs are available, test frequency: 23Hz Waisted flat sample possible in three different variants Optical measuring device, preload and load amplitude can only be adjusted via travel Auction-ID: A1-51071-13

Shower set with hand sprayer, Sentiotec Finnish Heater 9kW up to 90 degrees, Steam option in shower room, LED RGB. 400V, Dimensions inside sauna LBH 239x304x240cm. New price: 68.755€ Dimensions louvered roof: LBH 240x285x265cm. Renson Algarve louvered roof. 2 pieces of LED lighting in the slats. Equipped with protecto. Jacuzzi not included. Auction-ID: A1-50621-4

Positive cold self-service display case without door Brand: Fogal Model: ALASKA SLIM 150 Power supply: Single phase (230V - 50Hz) Capacity: 555L Dimensions (W x D x H): 1510 x 715 x 1998 mm Weight: 115 kg Aesthetic aspect: Very satisfactory Used equipment sold as is, not refurbished and untested. Vesto reference: V8672 Auction-ID: A1-50906-233

Positive cold self-service display case without door Brand: Fogal Model: ALASKA SLIM 150 Power supply: Single phase (230V - 50Hz) Dimensions (W x D x H): 1510 x 715 x 1998 mm Weight: 189 kg Aesthetic aspect: Very satisfactory Used equipment sold as is, not refurbished and untested. Vesto reference: V8671 Auction-ID: A1-50906-234

Fatigue testing machine max. bending moment: ±12Nm alternating max. bending moment: 24Nm swelling, 3 different measuring springs are available, test frequency: 23Hz Waisted flat sample possible in three different variants Optical measuring device, preload and load amplitude adjustable via travel Auction-ID: A1-51071-14

Fatigue testing machine max. bending moment: ±12Nm alternating max. bending moment: 24Nm swelling, 3 different measuring springs are available, test frequency: 23Hz Waisted flat sample possible in three different variants Optical measuring device, preload and load amplitude adjustable via travel Auction-ID: A1-51071-12

Vial labeling machine Manufacturer: Avery Model: WLT720 (ALX720) Year: 2008 Serial Number: JBWO3070 Printer and label dispensing system Siemens HMI Seavision control system (cameras + HMI) 2 accumulation tables (inlet and outlet) Max speed: 150 products/minute For bottles with a diameter of 30 to 100 mm (manufacturer's data) Originally suitable for formats: - Diameter 22 height 62 / alu - Diameter 40 height 100 / brown glass Label format: - Width: 18 to 100 mm - Length: 5 to 330 mm - Roller: max outer diameter 400 mm / mandrel 76 mm Power supply: 400 V 3-ph / 50 Hz / 2.5 kVA Pressure: 4 to 6 bar Technical documentation: available, details on request Overall Labeling Dimensions (W x D x H): 1900 x 2900 x 2200 mm Overall dimensions table 1 (W x D x H): 1800 x 1250 x 1200 mm Overall dimensions table 2 (W x D x H): 1660 x 950 x 1150 mm Auction-ID: A1-51057-5

- Disc diameter 300 mm. - Maximum rotational speed 3400 rpm. - With 2 vertical pneumatic grippers. - Input and output transfer are included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-612

- Engine power 0.94 KW-2690 rpm. - Maximum part capacity 150 x 75 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-605

- Includes: - Table with guide with total dimensions 2520 x 480 x 1100 mm. - Trolley: dimensions 800 x 650 x 1720 mm, arm length 370 mm, 4 swivel castors. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-610

• Dovetail machine Serial number 103502 Total installed power 2 KW Maximum workpiece width approx, 250 mm Milling template with 10 notches in each zone Distance between the notches approx, 25 mm Motor power 1,50 KW 8 milling spindles 2 pneumatic clamps • Operating conditions of this machine: unchecked. • Transport dimensions approx. 1200 x 900 x 1200 mm. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-50834-157

- Total installed power 5.30 KW. - Length of the piece to be cut from 310 mm to 4100 mm. - One head is fixed and the other mobile with automatic positioning commanded by programmable electronic control. - The 2 heads are tiltable. - Disc diameter 450 mm. - 2.20 KW motor in each head. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-601

Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible.

Auction-ID: A7-50603-8

Auction-ID: A7-50603-53

Perfect standing Auction-ID: A3-46101-2890

Flotjet 2000 table-type circular saw, model 480003, for precise rip, cross and mitre cuts in small pieces of solid timber, sheet materials and plastic. The robust construction, the swivelling table and the integrated sliding table enable flexible and precise workpiece guidance and high cutting accuracy. Suitable for furniture making, interior fit-out and craft workshops. Technical data: Pitch: ~ 650 mm Cutting width: ~ 170 mm Cutting height: ~ 40 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

Automatic cut off saw for cutting pre-programmed fixed lengths and fault trip caps after chalk marking. Not much worked top condition.

Ladies and gentlemen, Below we can offer: Manufacturer: Make: 1 piece used continuous furnace, make: Safed Type: 11Bd40/24 Built: 2005 max. working temperature: 1100C Heating capacity: 60 kW Dimensions Length: 15,000 mm Usable width: 340 mm Useful height: 150 mm Heating chamber length: 2,380 mm Muffle, cooling channel new Prices and pictures on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty e ...

MAX. TEMP.: 1000 °C, CAPACITY: 60 TON, NO. OF BURNERS: 20,

Kragarmregal OHRA 3 m high Over 100 m in stock, see pictures. Height 3 m high Boom 100 cm Load capacity/boom 800 kg 4.5 running metres, 4 pcs. stder with boom Negotiation price: € 1,440,-- /net Offer consists of: 4 St. Stander with foot 3 m high 4 adjustable booms, per stand 100 cm, load capacity 800 kg/boom. Diagonal struts, stiffening and distances are included. Frame spacing 150 cm Load capacity per stand per side 3,200 kg Height of 2.5 m, 4 m or 6 m available Other compilation on request: Constantly over 3000 lfm pallet racks in stock by numerous manufacturers. Transport and assembly possible on request. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, ...

Tool cabinet for bending tools Suitable for WILA/TRUMPF Tools or type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -extendable drawers, allows the two-sided access to the tools -arbitrary adjustment of the inserting roofs -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) run drawers Roller slide rails (serve as additional stabilization) - the cabinet can be disassembled - number of drawers: 4 sets - Mass of a drawer : - total height 1200mm / total width 850mm / total depth 1180mm - Mass of the Fa echer in a drawer: compartment hoehe set to 210mm (is varriabel) technical height total usable without intermediate boeden 990mm - specialist width usable 130mm depth usable 1100mm - Number of intermediate boeden: 4 Stueck / completely continuous; new ready for use

Tool cabinet for bending tools / exhibition object suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg - for AMADA/Promecam tools -extendable drawers, allows double-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated -side fork rails for transport by forklift (cavity under the cabinet) -the drawers run on roller slide rails ( serve as additional stabilization) -the cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Fachbreite usable 130mm - Technical depth usable 980mm - Number of intermediate boeden: 3 stueck

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Tool cabinet for bending tools suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allows the two-sided access to the tools -any adjustment of the inserting -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) Cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: compartment hhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Tray width usable 130mm - Depth usable 980mm - Number of intermediate boeden: 3 stueck

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Drilling capacity: 40 mm tool holder: MK 4 speed (spindle): 90-1455 K rpm projection: 320 mm drilling table swivel: +/-50° distance spindle to table maximum: 590 mm distance spindle to base plate: 1155 mm column diameter: 120 mm table size: 505 x 425 mm worktop base plate: 360 x 370 mm motor power: 1.0 / 1.5 kW machine dimensions (W x D x H): 500 x 930 x 1870 mm weight approx.: 450 kg Accessories: - Chuck Dorn MK 4 / B 18 - coolant system - digital speed display - keyless drill Chuck 1-16 mm / B 18 - reduction sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 - halogen lamp - automatic tool ejector - protective cover

Drilling capacity in steel/GG: 23 mm spindle retainer: 2 MK projection: 300 mm table size: 300 x 300 mm Quill stroke: 100 mm spindle speeds: 190-1500 rpm drive motor: 380 V, 0.5/0.75 kW space: 410 x 670 x 1950 mm weight: 180 kg

Drilling capacity in steel/GG: 50/60 mm spindle retainer: 5 MK projection: 400 mm table size: 700 x 600 mm Quill stroke: 275 mm spindle speeds: 32-1030 rpm feeds: 4: 0.1 ? 0.4 mm drive motor: 380 V, 2.2/3.7 kW space: 700 x 1200 x 2700 mm weight: 1240 kg