typ al 121 used for sale

Alcove Sofa 3-Seater Highback Design: Ronan & Erwan Bouroullec Dimensions (H x W x D) in cm: Seat dimensions (H x W x D) in cm: Seat + high back upholstered The sofa can be easily dismantled and made transportable by zippers on the edges Auction-ID: A7-46320-26

Welch Allyn 62000 Series Patient Monitor Patient Monitor ECG SpO2 NIBP Auction-ID: A7-46327-99

equipped with wicket door, filler pipe, eaves protection, stairs, drawings available, Please note! pick up by appointment, Auction-ID: A1-43992-33

Alcove Sofa 2-Seater Highback Design: Ronan & Erwan Bouroullec Dimensions (H x W x D) in cm: 136 x 164 x 86 Seat dimensions (H x W x D) in cm: 46 x 146 x 50 Seat + high back upholstered The sofa can be easily dismantled and made transportable by zippers on the edges Auction-ID: A7-46320-18

equipped with 2 compartments (55 m3 per compartment), double filling pipe, wicket door, eaves protection, Please note! Pick up by appointment Auction-ID: A1-43992-37

equipped with wicket door, eaves security, Please note! Pick up by appointment Auction-ID: A1-43992-34

Features: - New front tyres - Remanufactured cylinders - New head gaskets Auction-ID: A1-40136-92

Good condition Auction-ID: A7-46327-145

Equipped with: Case IH 2130 Pro 4WD, diesel, PTO and hydraulic connections available, open version, cab available is included in purchase (see photos), 3-cylinder diesel, 4-stroke, direct injection, displacement: approx. 1,957 cm³, power: approx. 38 kW (± 52 hp) at 2338 rpm, permanent all-wheel drive (4WD), 12 forward / 12 reverse gears, mechanical, top speed: approx. 29 km/h, PTO (PTO): 540 / 1000 rpm, hydraulics: open center system, 3-point linkage cat. 1, Lifting capacity: approx. 2.2 – 2.8 tonnes (depending on position), Wet multiple disc brakes, Steering: Hydrostatic, Weight: approx. 2.1 – 2.2 tonnes, Dimensions length: approx. 3.45 metres, Width: approx. 1.15 – 1.98 metres (adjustable track), Height: approx. 2.35 metres, Wide agricultural tyres, Rear hydraulic valves, Towbar / linkage, 7-pin plug rear, Hyd. Connection right side, reversing lever on handlebar. Auction-ID: A1 ...

equipped with 2 compartments (55 m3 per compartment), double filling pipe, wicket door, eaves protection, Please note! Pick up by appointment Auction-ID: A1-43992-39

Distance between the bars 420x420 mm, hole centering ring fixed plate Diameter 125 mm, minimum installation height 250 mm, maximum opening 750 mm, core pull 1, documentation, equipped with hydraulic screw drive, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-19

Distance between the bars 420x420 mm, hole centering ring fixed plate Diameter 125 mm, minimum installation height 250 mm, maximum opening 750 mm, core pull 1, documentation, equipped with hydraulic screw drive, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-17

Distance between the bars 420x420 mm, hole centering ring fixed plate Diameter 125 mm, minimum installation height 250 mm, maximum opening 750 mm, core pull 1, documentation, equipped with hydraulic screw drive, documentation, Please note! Pick up by appointment Auction-ID: A1-43992-20

Good condition Very light aluminium Auction-ID: A7-46327-197

Lippert alignment conveyor inclined roller conveyor 2050-650-530 RA2490 Make: lippert Year of manufacture: Roller width (RB): 530 mm Nominal/outer width (NB): 650 mm Length: 2050 mm Diameter rollers: 50 mm Distance between rollers: 60 mm Roller conveyor motor: SEW drive motor frame height: 100 mm Conveyor speed: contact us Angle rollers: ca. 5° Optional: supports Side guide adapted conveyor speed range with frequency converter Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: gut nominal voltage: 380-500V angle: ca.5° Conveying length in mm: 2050 Nominal / outside width in mm: 650 Roll width in mm: 530 Roll division in mm: 60 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: ohne Frequenzumrichter, without supports and side guides For individual, expert advice, simply get in  ...

Schneider Electric - ALB70480 - Batch of components Condition: unused Auction-ID: A1-46070-327

Batch of unused tape measures Condition: unused Weight: 2.4KG net Auction-ID: A1-46070-262

Weber - Industrial labeling system Alpha-HSM Auction-ID: A1-46070-250

Schneider Electric - Batch Altira installation material and cabling Auction-ID: A1-46070-285

Auction-ID: A1-46315-15

Schneider Electric - Multi 9, Altira, Linergy - Batch of electrical components Condition: unused Auction-ID: A1-46070-306

Including various attachments, test block and dial gauge on tripod Auction-ID: A1-46315-63

Batch of unused work gloves Condition: unused Weight: 66KG net The list below contains only examples of items that are present in this game. Ansell HyFlex 11-801 Auction-ID: A1-46070-273

Batch of Rexroth linear guides / aluminium profiles – various lengths Weight: 156KG net Auction-ID: A1-46070-37

Siemens, Allen-Bradley, Indramat - Batch of industrial electronics & servo controllers Auction-ID: A1-46070-231

Equipped with Yanmar diesel engine; hydrostatic drive; driving with drive levers; provision for hydraulic weed rolling; Auction-ID: A1-41682-9

Operating table - Maquet 1150.02D0 Mobile Column - Maquet 1150.30B0 table top - Maquet remote control incl. charger - Maquet 1150.81A0 Power Supply / Transformer Auction-ID: A7-46412-1

2X Alaris CC plus 1X Alaris TIVA 1X Alaris GS Auction-ID: A7-46412-34

Weld-on part with VTN / Martin old small mount, Dimensions of the mount:, Bolt diameter: 50 mm, Handle/mounting width: 190 mm, Bolt spacing [center - locking plate]: 320 mm

Manufacturer: Metall Meister Type / Model: not known / not specified Mobile tool trolley / assembly table with cast aluminium chipboard (T-slot) Mobile tool trolley / work table Steel frame construction with castors, cast aluminium plate as work surface Design of the work surface: Cast aluminium plate with T-slots Suitable for clamping, assembly and straightening work Condition: Used Work surface: approx. 1200 × 800 mm Auction-ID: A7-46417-74

200 litre, Stock number: T4028, Litre: 200, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs , Top: Dished, Bottom: Conical, Inner diameter: Ø 500 mm., Total height: H 1520 mm., Manufacturer: Alfa Laval, Model/type: Vacuum tank type DD, Other: No condenser

suitable for e.g. Alfen S-Line Auction-ID: A1-44832-807

Allimex Allislide Mid Clamp 6 boxes with 100 pieces Auction-ID: A1-44832-63

Length 275 cm; total approx. 190 pieces Auction-ID: A1-46266-366

End clamp Allimex Allislide Pallet with 48 boxes of 100 pieces Auction-ID: A1-44832-60

ATTENTION! Vehicle is in Poland but can be brought to BE by seller for a fee! Auction-ID: A3-43524-13001

Allimex Allislide Mid Clamp 1 pallet with 48 boxes of 100 pieces Auction-ID: A1-44832-65

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-39

Length 90 cm; Auction-ID: A1-46266-371

930x2315 mm right Auction-ID: A1-46266-323

Allimex Allislide Mid Clamp 2 boxes with 100 pieces Auction-ID: A1-44832-62

Allimex cable clamp Allin 5 boxes with 1000 pieces Total: 5000x bolt + 5000x knurled nut M8 Stainless steel Auction-ID: A1-44832-69

Allimex cable clamp Allin 2 boxes with 1000 pieces Total: 2000x bolt + 2000x knurled nut M8 Stainless steel Auction-ID: A1-44832-68

Allimex Allislide Mid Clamp 12 boxes with 100 pieces Auction-ID: A1-44832-64

End clamp Allimex Allislide 12 boxes with 100 pieces Auction-ID: A1-44832-59

MATEC forklift blades are robust and easy to build and can be attached to almost any commercial lyklift. With a fuse bolt, the tilting device can be blocked for special inserts. The front shutter flap can be mounted on any shovel. The interchangeable scraper is suitable for planing work such as removing ice, repelling soil, gravel or feed, etc. - Bucket width 1950 mm - Bucket depth type 1: 1000 mm, shovel depth type 2: 1330 mm - Bucket height without attachment 450 mm - Weight approx. 220 kg - Payload 2000 kg - Steel sheet 4 mm industrial lypainted - Fork shoes axle distance 800 mm - Fork tine width max. 170 mm - Fork thickness max. 60 mm - 4 lifting eyelets for krange slopes - Tilting device for cable pull with lifter and spring reset, securing bolt Options at extra cost: - Type 2 shovel depth 1330 mm Total price € 1590.00 - Front shutter € 590.00 - hydr. Liftin ...

Automatic cut off saw for cutting pre-programmed fixed lengths and fault trip caps after chalk marking. Not much worked top condition.

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

Ladies and gentlemen, Below we can offer: Manufacturer: Make: 1 piece used continuous furnace, make: Safed Type: 11Bd40/24 Built: 2005 max. working temperature: 1100C Heating capacity: 60 kW Dimensions Length: 15,000 mm Usable width: 340 mm Useful height: 150 mm Heating chamber length: 2,380 mm Muffle, cooling channel new Prices and pictures on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty e ...

Kragarmregal OHRA 3 m high Over 100 m in stock, see pictures. Height 3 m high Boom 100 cm Load capacity/boom 800 kg 4.5 running metres, 4 pcs. stder with boom Negotiation price: € 1,440,-- /net Offer consists of: 4 St. Stander with foot 3 m high 4 adjustable booms, per stand 100 cm, load capacity 800 kg/boom. Diagonal struts, stiffening and distances are included. Frame spacing 150 cm Load capacity per stand per side 3,200 kg Height of 2.5 m, 4 m or 6 m available Other compilation on request: Constantly over 3000 lfm pallet racks in stock by numerous manufacturers. Transport and assembly possible on request. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, ...