typ al 121 used for sale

Gear motor electric motor -Speed: 21 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter shaft: Ø 25 mm -Protection class: IP 55 -Price: per piece -Number: 1x available -Dimensions: 390/270/H210 mm -Weight: 17 kg

used non-ferrous separator Manufacturer: WAGNER Type: 0428-25/60 Machine No.: 214401 Year of construction: 1994 specifications: Conveying width: approx. 600 mm Throughput: 40-65 m³/h Belt speed: 0.12 m/sec to 1.3 m/sec Weight: approx. 1,200 kg Protection class: IP 54 (control device) Motor rotor drive: 3.7/4.7 kW Motor belt drive: 0.75 kW

Didar Part Number 260057620 Original Part Number 362161 – 472046 In-Pipe Water Pressure 4 – 7 bar Out of Pipe Air Pressure 2 – 6 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 230 °C Amount of Water in the Pipe 58 Lt. Amount of Air Outside the Pipe 120 Lt.

Cutting Clamp Kit, Hand Pipe Thread Cutter, Tapping Machine, Pipe Thread Cutter, Pipe Thread Cutter, Cutting Head -for pipe size: max. 1 1/4 inches -Cutting tips: 7 -Transport case -Weight: 9.8 kg

all stainless steel hopper capacity 270L die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute total power 8 kW air consumption ± 300 L / min. mobile with mould trolley variable speed 3x400v 50hz with bridge breaker dimensions (l x w x h) : ± 3.140 x 1.900 x 2.570 mm weight 1200 kg PLC control

roller conveyor, conveyor track, roller conveyor belt, roller track -Roll width: 2000 mm -Conveyor length: 5000 mm -Roller drive: via conveyor chain

Kuper Veneer Zigzag Veneer Composition Machine, Type FW/ 1200-E Year of manufacture 1995 S/N 3508 3179 Special features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely adjustable zigzag width of the glue thread cutting device veneer thickness : 3.0 mm min. veneer thickness : 0.3 mm Glued thread with hot air heating Compressed air generation Discus for transporting the veneer over the veneer table Control via foot pedal Feed Speed: 35-60m/min Voltage: 400 V, 50 Hz Total power 1.35 kW Working height 915mm Bzunfcilke Weight approx. : 440 kg Dimensions : 2,12m x 0,73m x 1,55m

Sink, sink -Stainless steel sink -Basin size: 345/345/H270 mm -Dimensions: 600/600/H505 mm -Weight: 15 kg

See Data Sheet

Quick-change attachment for wheel loader buckets, screening buckets, stone buckets, shovels, sorting buckets -Quantity: 5 pieces of various types -Number: 5 different manufacturers -Sale: only complete set -Price: complete -Total weight: 136 kg

Waterfall shower, massage shower -Stainless steel sink -Pipe: Ø 89 mm -With eye shower -Dimensions: 680/H1020 mm -Weight: 17 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 450 x 450 mm -Depth: 250 mm -Edge: mm -Dimensions: 500/500/H250 mm -Weight: 7 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 1000 x 600 mm -Depth: 500 mm -Edge: 14 mm -Price: per piece -Number: 1x available -Dimensions: 1030/630/H500 mm -Weight: 26 kg

Hand wash basin, wash basin, welded-in basin, welded-in swivel basin -Stainless steel sink -Internal dimensions: 600 x 450 mm -Depth: 300 mm -Edge: 18 mm -Number: 11x available -Hole bottom left: 2/Hole bottom right: 9 -Price: per piece -Dimensions: 640/500/H300 mm -Weight: 5.1 kg

Wheel diameter: 200 mm Cutting height: 80 mm cutting width: 180 mm Motor output: 350 W Table dimensions: mm Table tiltable: 45 Grad saw band length: 1400 x 6,5 x 0,35 mm machine weight ab.: 12 kg Dimensions (L/W/H): 700 x 600 x 700 mm Wood band saw with extendable and swiveling saw table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 400 mm Cutting height: 200 mm cutting width: 350 mm Motor output: 1,5 kW Table dimensions: 400 x 500 mm Table tiltable: 45 Grad saw band length: 2950 mm machine weight ab.: 150 kg Dimensions (L/W/H): 700 x 600 x 1800 mm wood band saw Thanks to the heavy cast-iron table, the wood band saw offers good stability. The machine has a longitudinal guide and a miter guide and is supplied with a saw band. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hand wash basins, wash basins, built-in basins -Stainless steel sink -Interior dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 40 mm -Drainage: Ø 50 mm -Number: 4x available -Price: per piece -Dimensions: 580/480/H250 mm -Weight: 5.1 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 300 mm -Depth: 150 mm -Edge: 17 mm -Drain: Ø 52 mm -Number: 7x available -Price: per piece -Dimensions: 340/H150 mm -Weight: 2.1 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 390 x 285 mm -Depth: 120 mm -Drain: Ø 52 mm -Faucet: Ø 28 mm -Dimensions: 495/350/H130 mm -Weight: 2.4 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 420 mm -Depth: 180 mm -Edge: 18 mm -Drain: Ø 54 mm -Number: 2x available -Price: per piece -Dimensions: 460/H180 mm -Weight: 2.5 kg

Hand wash basin with sink, wash basin -Stainless steel sink -Upper basin size: 390 x 285 x 120 mm -Lower basin size: 400 x 400 x 200 mm -Number: 6x pools available -Price: per piece -Dimensions: 700/500/H445 mm -Weight: 9.1 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 400 x 400 mm -Depth: 250 mm -Edge: 22 mm -Drainage: Ø 60 mm -Number: 12x available -Price: per piece -Dimensions: 440/440/H300 mm -Weight: 3 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 400 x 400 mm -Depth: 200 mm -Edge: 19 mm -Drainage: Ø 64 mm -Number: 7x available -Price: per piece -Dimensions: 440/440/H200 mm -Weight: 2 kg

Hand wash basin, wash basin, welded-in basin, welded-in swivel basin -Stainless steel sink -Internal dimensions: 380 mm -Depth: 180 mm -Edge: 22 mm -Drain: Ø 54 mm -Quantity: 1x available -Dimensions: 425/H180 mm -Weight: 2.1 kg

Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 500 x 400 mm -Depth: 300 mm -Edge: 24 mm -Drain: Ø 64 mm -Quantity: 4 available -Price: per piece -Dimensions: 550/450/H300 mm -Weight: 4.2 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 18 mm -Drainage: Ø 97 mm -Number: 12x available -Price: per piece -Dimensions: 540/440/H250 mm -Weight: 4.3 kg

Stainless steel, work table -stable execution -Dimensions: 898/598/H870 mm -Weight: 12 kg

Sales counter, counter, stainless steel, cabinet, work table -Drawers: 2 -Table dimensions: 700/1600/H830 mm -Roof dimensions: 1800/1670/H2330 mm -Design: stable -Transport dimensions: 2060/730/H870 mm -Weight: 120 kg

High pressure air compressor Belliss and Morcom High pressure air compressor Belliss and Morcom type: VH9H3N serial no. R188660 year of manufacturing: 2005 maximum working pressure: 40bar capacity: 580 m³ / h incl. pressure tank incl. cooling system / chiller

Hand washbasin, washbasin, weld-in basin, swivel basin -Stainless steel sink -Internal dimensions: 400 x 400 mm - Depth: 300mm -Edge: 18mm -Number: 20x available -Price per piece -Dimensions: 440/440/H300 mm -Weight: 3.9kg

CHECKWEIGHING MACHINE

Foil wrapping machine with shrinking tunnel manufacturer: Gramegna type: Champion year of manufacturing: 2000 capacity: up to 7.000 bph for wrapping PET bottles into foil and shrinking afterwards

Hydraulic power pack, hydraulic pump, hydraulic pump -Hydraulic unit comes from a Gildemeister lathe -Drive: 1.1 kw -Speed: 1410 rpm -Max. Pressure: 25 bar -Liter output: l/min -Filter -Hydraulic tank -Dimensions: 500/680/H660 mm -Weight: 98 kg

Electric chain hoist, chain hoist electric, with roller chassis used Manufacturer: LIFTKET Type: 071/53 Year of construction: 2008 Payload: 1000 kg two-strand lifting height approx. 5 m, single strand 10 m Lifting speed: 5.0 / 1.25 m/min with roller chassis Net weight approx. 60 kg Dimensions approx. 510 x 270 x 600 mm The chain hoist was only used for possible repairs in a mixing plant. So little has been used. All articles are checked for function before delivery, if technically possible! Changes and errors in the technical data, information and prices as well as prior sale reserved.

Signal pillars, signal lights, signal lamp, control lamp -Manufacturer: Patlite -Type: LU7-02 -Dimensions: 70 x 340 mm -Weight: 0.7 kg

1 used pallet rack; Make: SSi-Schäfer Type: PR600 Year of construction: 2001 Longitudinal truss shelf field load: 8,400 kg lower clear compartment height: 2,093 mm -40 pieces of stand frame frame height: approx. 11,500 mm Frame depth: 800 mm; Profile: P95, galvanized -298 traverses; Traverse length: 4,000 mm INP profile steel beam: 100 x 50 mm; material colour: blue -60 pieces of trusses; Traverse length: 2,700 mm; INP profile steel beam: 100 x 50 mm; Material color: blue -2 pieces of pallets with depth bars; for shelf depth 800 mm;material colour: blue; -10 pieces of steel beams; Length: approx. 4,030 mm U-profile: 100 x 50 mm, material colour: blue -50 pieces of steel beams; Length: approx. 2,780 mm; U-profile: 100 x 50 mm;Material colour: blue Construction can be individually designed. The dismantled system is in our warehouse in Eitorf Transport and assembly ca ...

Mixing tub, mixing bowl, mixing trough -Bathtub depth: 470 mm -Contents: approx. 220 l -Corners: rounded -Internal dimensions: 800 x 610 x D 470 mm -External dimensions: 840/860/H640 mm -Weight: 32 kg

Available in stock 1 x Used Boll & Kirch Duplex Filter and 1 x Used Boll & Kirch Lub. Oil Automatic Filter. The equipment was used in a HFO power plant. The equipment is used but is in good working conditions. Max all working pressure: 10 bar Max all working temperature: 80ºC

Roller conveyor, roller conveyor, roller conveyor -Roll width: 500 mm -Conveying length: 1200 mm -Diameter roller: 50 mm -Roller conveyor height: 280 mm -Dimensions: 650/1350/H280 mm -Weight: 70 kg

loading : 75 to 80 % double jacket suitable for cooling or heating up to 75°C with mixing arm all stainless steel tiltable drum outside dimensions (l x w x h) : ± 2.400 x 1.100 x 2.000 mm 3kW PLC control yoc 2017

2 knife speeds 2 mixing speeds 2 separate bowl speeds emptier With loader Auto command 3000 K yoc 2017 only 1.603 running hours 125 kW total connected power

Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 450 mm -Conical mount: Ø 110 mm -Groove: 16 mm -Weight: 66 kg

resistor, wire potentiometer, resistor -Types see pictures Price: complete Packages: 4 -Bags: 25 -Weight: 8.5 kg

Balance range: 1500 g Temperature range: 5° - 40° C Mains connection: 220 V, 50 Hz

Balance range: 1500 g Temperature range: 5° - 40° C Mains connection: 220 V, 50 Hz

Labeler prepared for 3x adhesive labels with hot melt (front/back/safety tab). The labeller was overhauled in 2021 by the manufacturer Gernep, including new electrics according to CE standard. The labeller is equipped for the glass type DTO80. The labeller was in operation for about 200 hours after the overhaul.

Z-kneader, Year of construction 1970, engines, bearings, gears, gearbox, electrics, overhauled around year 2022. Machine is immediately available and ready for use. Z-Kneader has an electric tilting device.

Weld studs, ceramic rings, tip ignition studs, head studs -Welding studs: with ceramic rings, 40 different types Quantity/Version: see photo parts list -Delivery/Price: only complete set -Dimensions: 1200/800/H120 mm Total weight: 64 kg

Flange connection, V-flange -Weld neck flanges. 183 pieces -Type: DIN2633 / EN1092 26 different versions see photos parts list -Price/tax: complete -Weld neck flanges: please inquire about other sizes in stock -Transport dimensions: 1200/800/H540 mm -Weight: 533 kg

Capping heads Zalkin different closure sizes