typ al 121 used for sale

Replacement columns for aluminium die-casting machine OL2000, D285x10, Oleopress, new -50% Special price! In addition, we also have a spar nut and 2 adjusting nuts in separate adverts. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely new and in ist original packaging. Material: Chrome-plated alloy steel Manufacturer Olepress / O.P. DIE Casting Thread 285 x 10mm, L 6830mm Weight approx. 3400 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Max blade diameter: 450 mm Weight: approx. 700 kg Hydropneumatic saw blade feed via 2 manual operation Pneumatic material tensioners Minimum quantity spraying device Table rotatable on both sides with rest points at 45°

Alu wagons Single price: EUR 125,- + VAT for acceptance from 10 pieces EUR/piece 95,-

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -ALUDEC 112 Ø 180 x 10 MTR -Dimensions: 815/220/220 mm -Weight: 3.9 kg

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -ALUDEC 112 Ø 254 x 10 MTR -Dimensions: 815/270/270 mm -Weight: 5.3 kg

New 250 KW 294 KVA water-cooled three-phase motors EMOD WKASYG 315L4-700 (5 pieces) for sale. 4.500 € for each generator plus VAT. FCA freely charged in D-Bergisch Gladbach. Brand: EMOD Type: WKASYG 315L4-700 Year of construction: 2018 Voltage: 400 V rpm: 1510/ min Engine number: 8359010 Weight: 2.322 kg Rated voltage: 400 D Rated current: 425 A Rated power 250 kW/ 294 KVA Operating mode: S1 Engine protection: KALTL. : 3155°C Design: B3 Wave: 80170 KLK location: 0° Protection class: IP55 Frequency (Hz): 50 Condition: Completely new

X-axis (upright horizontal stroke): 6000 mm Y-axis (vertical head stroke): 3000 mm Z-axis (RAM stroke): 900 mm W-axis (round-ing table): 2000 mm Axis B (table positions): 360000 Table capacity: 17 ton Universal birotative head indexed positioning

Bosch alternator -Nominal voltage: 14 V 70 A -Type: 028 903 028 C -Dimensions 158/184/H145 mm -Weight: 5.5 kg

Bosch alternator -Type: 1100827 22A 76E 3 -Voltage: 12 V -from forklift: Still type EFG 1.0/5002 -Dimensions: 187/165/H140 mm -Weight: 4.6 kg

x-travel: 450 mm y-travel: 400 mm z-travel: 320 mm tool taper: HSK 63 spindle turning speed range: 0 - 10000 U/min rapid traverse: 30 m/min System for processing fittings, valve housings, etc. consisting of 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 1-0 / 1-V, YOM 2010, with 2 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø (B axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant device connected by ABB handling robot with 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 2-0 / 1-V, YOM 2003, with 3 pcs. 3-axis machining modules, each with 8-po ...

Aluminum miter saw, underfloor saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Saw blade diameter: 355 mm -Speeds: 1420/2880 rpm -Drive: 3.7/4.5 kW -with: coolant device -Dimensions: 990/1140/H1535 mm -Weight: 596 kg

saw blade diameter: 400 mm capacity 90 degrees: round: 110 mm capacity 90 degrees: square: 100 mm capacity 90 degrees: flat: 200x60 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: square: 140x60 mm total power requirement: 1,5 kW weight of the machine ca.: 130 t dimensions: 0,8 x 0,7 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: square: 135 x 60 mm saw blade turning speeds: 1700 / 3400 U/min total power requirement: 1,5/2,2 kW weight of the machine ca.: 0,210 t dimensions: 0,9 x 1,4 x 1,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The JMC 150 has a mechanically adjustable hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. The JMC 150 is a tabletop unit for easy handling. Manufacturer: Mc Intyre Knife length: 150 mm Measuring opening: 105 mm Cutting capacity: 25 tons Round iron ST 37: 25 mm diameter Number of strokes at 1/4 aperture: 20 / min Number of strokes at 1/2 opening: 12 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 660 x 520 x 620 mm Weight: 150 kg Drive: 1.5 kw / 230 Volt Operation: Foot pedal

JMC 900 alligator shears (new machine) The JMC 900 has a hydraulic hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. Out of stock Delivery time: On request Manufacturer: Mc Intyre Knife length: 920 mm Measuring opening: 473 mm Cutting capacity: 233 tons Round iron ST 37: 88 mm diameter Number of strokes at 1/4 aperture: 26 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 3200 x 1030 x 1800 mm Weight: 4400 kg Drive: 18.5 kw / 400 V + 1.5 kw electric motor cooler Operation: Foot pedal

Alternator regulator -Manufacturer: Bosch -Type: 0190113 004 850 -Number: 1x controller available -Price: per piece -Weight: 1.6 kg

Alternator regulator -Manufacturer: Bosch -Type: 0190 112 006 000 -Number: 5x controllers available -Price: per piece -Weight: 2.4 kg

Aluminum circular saw, miter saw, glass bead saw, aluminum saw, underfloor aluminum miter saw machine -Processing of: flat, angle and solid material, pipes and special profiles -Saw blade: Ø 350 mm -Drive: kW -Speed: 900/1700 rpm -Dimensions: 900/520/H1280 mm -Weight: 150 kg

New aluminium perforated sheets Material: Aluminum Punched 3-edge Material thickness: approx. 1.5mm

New aluminium perforated sheets Material: Aluminum Punched 3-edge Material thickness: approx. 1.5mm 60x40cm

used scrap shears / Aligator scissors Manufacturer: Schlüter Maschinenfabrik Type: MGA 6 Year of construction: 1974 specifications: Cutting performance at 37 kg/mm²: Round iron: up to 18 mm Square liners: up to 15 mm Flat iron: up to 60 x 8 mm Sheet: up to 7 mm

End milling machine GRAULE AKF 6/250 Single head saw GRAULE ZS 170N Copy router MECAL FR 811 Corner crimper WEGOMA EV 175

Specifications Year of construction: 1995 Saw blade Ø (mm): 400 Directly from the customer used from November from CH-Pratteln available.

1 Reimelt Zeppelin aluminium outer silo 2 chambers Silo stands on frame Capacity 80m³ Ø 3,000 mm Height approx. 15,000 mm Bulk density 0.8 t/m³ Price on request Phone +49 172 8345457

Geppert Band AM-F 7,30m x 0,30m with drive The plastic modular belt AM-F is characterized by its slim design. Thus, the width of the frame is only 14mm more than the chain. At the linkage it is also only 40mm more. The frame including the chain is 95mm high. The modular plastic chains of the AM-F are easy to clean, particularly hard-wearing and easy to maintain by replacing individual links. Specifications: Year of construction: 2012 Length: 7,30m Width: 0,30m Height: 1,00m Drive: 220/240V 1pH Complete plant closure, wide range of mezzanine floors, pallet racks, shelving racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines More items - new and used - can be found in our shop! International shipping costs on request!

Planetary gear alpha, SP 140S-MF1-7-4G1-2S, I=7, Wittenstein, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. - Shaft D32mm, - centering D130mm - Output side for shaft D24mm - I=7 Function guarantee! For second hand parts, we can not provide conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

Alignment tester, shaft aligner, laser shaft aligner -Manufacturer: db Prüftechnik, alignment tester Optalign 1.5 -Accessories: see photos -Dimensions transport box: 420/290/H555 mm -Weight: 20 kg

Hydraulic container, hydraulic tank, aluminum container for hydraulic pump, hydraulic unit -Hydraulic tank: Universal tank made of aluminum, unused -Tank capacity: approx. 230 l -Connections: see photos -Dimensions: 565/485/H1215 mm -Weight: 40 kg

Pneumatic material feed Feed length: 800 mm (multiple stroke possible, max. 2,400 mm) saw blade diameter: 500 mm Cuts between 45° and 90° possible Saw blade speed: 2850 rpm Infinitely adjustable saw feed Minimum quantity spraying device Piece counter with automatic switch-off Weight: 600 kg

STAMFORD Synchronous Generator HVSI 824 F2 2788 KVA 10,500 V 153.3 A 50 Hz, 1500 1/min. Accessories: - 2 sets winding PT100 - AVR MA327, PFC-3 COMPLETELY RECONDITIONED, restored, windings impregnated

Control panel fire alarm center GE-1X-F2-04 for sale, with original packaging

self-aligning ball bearing -Bearing type: Self-aligning ball bearing -Bore: Ø 30 mm -Outer diameter: 72 mm -Width: 27 mm -Weight: 0.5 kg

self-aligning ball bearing -Bearing type: Self-aligning ball bearing -Bore: Ø 35 mm -Outer diameter: 80 mm -Width: 31 mm -Weight: 0.65 kg

self-aligning ball bearing -Bearing type: Self-aligning ball bearing -Bore: Ø 40 mm -Outer diameter: 90 mm -Width: 33 mm -Weight: 4.7 kg

self-aligning ball bearing -Bore: Ø 45 mm -Outer diameter: 85 mm -Width: 19 mm

alternator -Type: 0986 031 190 -28 V -Weight: 5 kg

MECAL MC302 GEOS-5 aluminium profile machining centre was built in 2014 in Italy. The machine, characterised by high structural rigidity, quality components and a longitudinal working area with a sliding workstation, is used for milling, drilling, threading and cutting profiles made of aluminium alloys, plastics and steel. Thanks to the sliding workstation, the MECAL machining centre can perform machining on a single work area as well as inside 2 separate work areas, resulting in a significant increase in speed and productivity of the manufacturing process. All 5 axes (X,Y,Z,A,C), driven by motors with digital systems, move on automatically lubricated precision guideways. The clamps holding the workpiece during machining are equipped with an independent power supply system which allows positioning and automatic repositioning of all of the clamps in a very short time. The MECAL GEOS-5  ...

Qty. 1 Second-hand aluminium strip caster – dismantled and in storage Mfc.: Tianzhong, China Built: 2005 Stopped: 2008 Dismantled: 2022, currently in storage Strip width: 1400 mm Thickness: 5 – 10 mm (AL S1000) 5 – 8 mm (AL S3003) Consisting of: Caster roller: 2 x dia. 750 mm x length 1600 mm caster work roll containing support roll chocks Caster shell: 2 x new dia. 820/700 mm x length 1600 mm Shell Alloy: ZTGT-2100 (Upgraded from 32Cr3Mo1V) Surface Hardness: 400-430 HB (43-46 HRC)

Qty.1 Second-hand Aluminium cold rolling mill Mfc.: SPIDEM Type: 4-Hi Non Reversing Built: 1964 Installed: 2017 (new mechanical & hydraulic, PLC – ABB, AGC) Stopped: 2020 Strip width: 1700 mm Thickness Entry: 11 mm Exit: 0.2 mm Rolling speed: 450 m/sec. with edge trimming: 300 m/sec. Mill force: 1500 T WR Length: 1830 mm Dia.: 465 / 500 mm Back-up rolls Length: 1830 mm Dia.: 1100/1200 mm De-coiler Max. counter traction force: 5500 kgP Reduction ratio: 1:5.53 Revolution: 72.3 – 199 RPM Speed: 136.5 – 375 m/min. Coiler (2 x 400-1100 RPM) Max. traction force: 15000 kgP Reduction ratio: 1:4.41 (470 m/min.) Speed: 9.9 – 200 m/min.

Aluminum circular saw, miter saw, glass strip saw, aluminum miter saw, metal miter saw, compound miter saw -Processing: of flat, angle and solid materials, pipes and special profiles -Saw blade: Ø 350 mm -Drive: 2.3/3 kW -Speed: 1430/2860 rpm -Dimensions: 800/900/H1600 mm -Weight: 260 kg

Bosch Rexroth aluminium profile workstation Bosch Rexroth aluminium profile Complete plastic glazing 4 cm worktop with a light grey melamine resin direct coating 190 x 90 cm Dimensions of the workplace WxDxH 195x93x220 cm Magnifier Magnifying Lamp 8062D2 More items new and used - you can find them in our shop! International shipping costs on request!

For sale. Price on request Phone +49 172 8345457

Aluminium sawing machine with 2 saw motors that make a 45° cut independently of each other. Material feed unit with up to 8,100 mm Cross conveyor, depositing table, chip conveyor and suction Soundproof booth Control via Siemens S7 panel Instruction manual etc. available, further technical data on request The machine was in operation until it was dismantled Further technical data on request or see photos

6 Pieces Zeppelin Aluminum Outdoor Silos Ø 3,500 approx. 240 cbm capacity Bulk density 1.0 t/m³ Length complete: 28 meters per silo for sale. Price on request Phone 0172 8345457

PREZ-MET PVC and aluminium window production line is a state-of-the-art and comprehensive solution for the mass production of windows. The system enables complete machining of PVC and aluminium profiles within a single working cycle. The production includes all key stages – from precise profile cutting, through milling, drilling, welding to final cleaning of the elements. The PREZ MET window production center is made up of three smaller integrated production lines – one line for the production of window frames and two lines for the production of window sashes. They consist of machines from renowned manufacturers from 2005-2016: – ROTOX ZSA 263 cutting center – PREZ-MET FS 50 end milling machine – PREZ-MET 42 MP copy milling machine – PREZ-MET ZGP 420 four-head welding machine (3 pcs) – PREZ-MET ZGP 380E two-head welding machine (2 pcs) – PREZ-MET ZG 940 single-he ...

Lippert Belt Conveyor Belt Conveyor Aligner Conveyor Sorter GF 2640-650-500 RA2048 Technical data: Conveying length (NL): 2640 (1340 + 650 + 650) mm Framework width (NB): 1300 mm belt width (GuB): 500 mm height (BH): 540 to 860 mm support feet: includet Conveying speed (v m/s): 0,8 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 82 mm Drive drum (AT): Ø = 82 mm Slide travel: 370 mm Year of construction: 2001 Optionally available: controlling/Software Frequency Converters Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 2640 Nominal / outside width in mm: 1300 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 1,30 Conveyor speed m / s: 0,8 scope of delivery: Lichtschranken, inklus ...

horizontal aluminium tank with 2 consoles Volume: 15 m³ Dimensions: Ø 1.90 x 5.80 m long

Used aluminium tube filling machine made by the Italian company IMA Comadis model 720 A. The Comadis 720 A is an automatic tube filling machine, designed specifically for metal tubes with a maximum diameter of 35 mm. This linear automatic machine is equipped with a crimp-sealing head and a tube orientation system, ensuring precision and efficiency in the filling and sealing processes. The machine features a conical product hopper with a heating/cooling jacket, located at the top of the unit, which facilitates a smooth flow of material. The unit is enclosed in a transparent protective housing, which ensures safety whilst allowing operators to visually monitor the filling process. Access to the interior is provided by transparent doors with handles, facilitating maintenance and cleaning. The control panel is fitted with a range of buttons and a clearly marked red emergency stop button,  ...

Transnorm Roller Alignment Centering Conveyor 2500-700-600 RA2073 Make: Transnorm Roller width (RB): 600 mm Nominal/outer width (NB): 700 mm Length: 2500 mm Roller diameter: 50 mm Roller distance:76 mm Drive motor: R17DT71D4/TH Eletrical Data: 380 V, 0,37 kW Height frame: 140 mm including Motor: 300 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Construction year: 2008 nominal voltage: 380-480 V Conveying length in mm: 2500 Nominal / outside width in mm: 700 Roll width in mm: 600 Roll division in mm: 76 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, expert advice, simpl ...

saw blade diameter: 420 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 100 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: square: 130 x 80 mm turning speeds: 3000 U/min engine output: 2,0 kW total power requirement: 2,0 kW weight of the machine ca.: 190 Kg dimensions: 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device - Roller conveyor with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.