typ al 121 used for sale

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -V-block: for marking plate, clamping plate, straightening bench... -Prism width: 115/23 mm / 121° -Dimensions: see photo technical drawing -Dimensions: 140/130/H130 mm -Weight: 13.8 kg

Shelf tray, spill tray, floor tray, pallet tray, collection container, spill pallet -Manufacturer: P&D, drip tray -Drip tray: Type -Collection volume: 180 liters -Load capacity: 800 kg -Grating: galvanized -Dimensions: 1210/1240/H285 mm -Weight: 493 kg

Vacuum press, vacuum table, vacuum membrane press, veneer press, laminate vacuum press -Handover: in its current condition as inspected -Condition: without vacuum pump -Vacuum press: on a mobile base -Sheet surface area: 1160 x 1210 mm -Dimensions: 1940/1640/H1135 mm -Weight: 637 kg

nozzle -28319 DLL 150-8-393 -1215 - 2947 -Quantity: 15 pieces available -Price/Sale: complete

Product number: 2854B Type: Combi 12110 TF Serial number: combi-121100102-tf Year of construction: 2002 Belt width: 1100 mm Cooking length: 11000 mm Heating: thermal fluid, 600kW Steam: 140 kg/h per valve Exhaust: 2 x 1000 m³/h Compressed air: 8 Bar Power: 3 x 400V, 50Hz, 20kW Dimensions: 13500 x 1750 x 2400 mm With belt washer and belt tension device

ID2955 Key Maker Magic 1211 year/Year of construction 1984 Manhole finisher, 1 piece Magic 1211, with 2 Atlas 300 + 400 molds, 2 palisade molds, 1 built-in mold, 1 vibrator incl. FU, various base sleeves Shaft paver, 1 piece Magic 1211, with 2 pieces of moulds Atlas 300 + 400, 2 pieces of mould palisades, 1 piece of mould installed, 1 piece of vibrator incl. FU, various lower sleeves

Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 121P3-20-FSH Refrigeration Machines, MTA S.p.A. TAEevo Tech 121P3-20-FSH are air-cooled compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 255 ltr., built-in P3 circulation pump, electric frost protection and a condenser pressure control (winter package -20°C). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 35 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 5.96 Available pump pressure (bar) 2.67 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 19 Max. Current (A) 33 Starting Current Circuit (A) 165 Protection class: IP54 Dimensions: Length (mm) 1862, Width (mm)  ...

Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 121P3-20-FSH Refrigeration Machines, MTA S.p.A. TAEevo Tech 121P3-20-FSH are air-cooled compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 255 ltr., built-in P3 circulation pump, electric frost protection and a condenser pressure control (winter package -20°C). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 35 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 5.96 Available pump pressure (bar) 2.67 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 19 Max. Current (A) 33 Starting Current Circuit (A) 165 Protection class: IP54 Dimensions: Length (mm) 1862, Width (mm)  ...

We offer for sale 20 pieces of spark plugs Jenbacher Part No. 1214569

MOSCA Pallet Packing Press Automatic Pallet Packing Press, Model KPK-121-18 Year of manufacture: 1999 The control system is S7. The strapping machine is equipped with 2 strapping heads, the second strapping head can be moved laterally. The press has an upstream, walk-in centering roller conveyor with turnstile. There is another turnstile under the press, which can be used to rotate the pallet before strapping. Occupancy dimensions including pallet: Length: 1,200 mm Width: 1,200 mm Height min. 500 mm max. 1600 mm Specifications: Infinitely adjustable belt tension: 200 – 2,000 N Belt guide speed: 4.6 m/s Closure Type: Friction Weld Closure Dimensions of the control panel: Width = 1,200 m, depth = 650 mm, height = 850 mm Dimensions of the packaging press: Max. vertical clearance: 1,600 mm Max. throughput width: 1,500 mm Length of the printing plate: 1,600 mm Pr ...

Refrigeration dryer Manufacturer: KAESER Type: TE 121 Year of Make: 1999 Rated motor power: 2.1 kW Maintenance carried out by Kaeser.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 53 mm gear width: 25 mm max. module: 3 min. module: 0,1 total power requirement: 0,8 kW weight of the machine ca.: 0,21 t dimensions of the machine ca.: 600x460x1200 mm Resharpening machine MIKRON 121 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8024 Type: CP 1216 Producer: Champion Created: 2017 Parameters: Vacuum belt width: 1600 mm Type of shaft generated: E. B. C. mm

Key data: 5300 mm, 2100 mm

Power sawing unit 4.6 kW Cutting length 5300 mm Cutting height 2100 mm Cutting depth 80 mm Total machine height 2900 mm Strip attack Weight approx. 700 kg Saw blade Ø 300 mm Hinged rail

1984 Schlüsselbauer Magic 1211 Manufacturer Information: Name: Maschinenbau Schlüsselbauer Machine Details: Model: Schlüsselbauer Magic 1211 Year of Building : 1984 Voltage : 380 V Control Voltage : 24 V Connected Wattage : 50 kW Frequency : 50 Hz Weight Total : 16,000 kg Country of Manufacture: Made in Austria 1984 Ernst Wagner KG Reutlingen HGU 3000 Type: HGU 3000 Load capacity: 3,000 kg Year of construction: 11 / 1984 Weight without battery: 4,410 kg Weight with battery: 6,410 kg Battery weight: min 200 kg / max 200 kg Find more here - / Contact us at -

Manufacturer: Graco Membranenpumpe, Type: A-1211, Transmission ratio: 125-8,6,

Type Record 121 Number of working axes 3+ Useful working area axis X-Y-Z 2600-1080-250 mm Table dimensions 2600 x 1080mm Spindle speed 900 - 18000 rpm Number of milling spindles: 1 Tool change positions: 12 Tool clamping system HSK63F Work table Matrix table The main engine is 7.5 kw Vacuum pump performance 250/300 m3/h Vacuum motor 6.5 kw The diameter of the extraction socket is 150 mm Air pressure 7 bar Voltage 380V/50HZ Transport dimensions 3700x3200x2600mm Weight 3500 kg The price is 15500 Eur

A vertical panel saw Holz-Her is available. Cutting length: 2200mm, cutting height: 30mm, number of saw blades: 3, saw blade diameter: 300mm, panel thickness: 0mm-30mm/30mm-70mm, clamping surface X/Y: 2200mm/5300mm, vertical stroke: 2200mm, horizontal stroke: 5300mm, speed: 4420rpm, machine dimensions X/Y: 6400mm/2900mm, weight: approx. 1000kg. Including 2x 3-part folding rails and 2x adjustable longitudinal stops with scales. Documentation available. On-site inspection is possible.

Cutting length: 2200 mm Cutting height: 30 mm automatic: nein ja/nein The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deck Oven Miwe Electro EL 5.1216 A used Miwe Elektro EL 5.1216 deck oven with a total baking area of 10sqm is for sale and immediately available in the warehouse in Bielefeld. The oven is electrically heated with 5 shelves each 120cm wide and 160cm stove depth and with exhaust hood including fan.Backstuben oven used fully functional from Miwe for sale. - 5 shelves each 120x160cm - 5 floors are with 17cm bunk entrance height - Top floor is with 24cm floor entrance height - Each floor with separate Miwe FP control - Each floor can be turned on and off separately - Each floor with separate top and bottom heat control - Each floor with sepreate steam box for steam generation - With exhaust hood including fan - Stove cladding completely in stainless steel - Year of construction 2008 - 66 kW

Working range X/Y: 1200mm/1600mm. Travel Z: 250mm. Max. table load: 80kg/m². Rapid traverse: 500mm/s. Machine dimensions X/Y/Z: approx. 2500mm/2000mm/1700mm. The machine is partially defective. On-site inspection is possible.

Qty. 1 Second-hand aluminium extrusion press line Code Aluminium HE9 6063 Mfc.: Indian manufacturer Built: 1978 PLC hydraulic – upgradation done in the year 2005! Total Force of Press: 680 MT, 750 UST Extrusion Pressure: 210 Bar Billet Diameter: 5”, 121 mm Weight per Inch of Billet: 0.76 kg/inch Scope of supply: Log heating furnace Hot shear Extrusion press Overhead puller Under-bed cooling system Run-out cooling bed Belt conveyor Stretcher Cutting machine Die oven Conveyor table Conveyor for final packaging

Completely new spark plugs from serie 6 of Jenbacher. Reference 1214569

Ice water system

Siemens Megalix CAT 125/15/40/80-121 GW Focal spot 0.3/0.6/1.0 Tube Housing Model No. 5764522 Tube Model No. 3800351 • Before taking over, all devices or systems have been tested on site for their functionality. • The tube is located in our warehouse in Freiberg / Germany. • You buy the tube in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system component must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

RLA 1213 Clean air extraction system 400V 1.5 KW Volume flow max. 1140 m³/h Suction nozzle 120mm Filter area of 5.1 m² Chip collection volume 135 litres mobile Weight of 121 kg G&STÜ-5131201

Adjusting nut for die-casting machine IDRA3300, TR330x10, 121311, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Adjustable nut, Tr330x10, D500x375mm high. 340kg Incl. bronze inlet ring Adjusting nut for die casting machine IDRA 3300 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: max. 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 Nm tool taper: HSK-A 63 swivellable: B: +30° / -120 ° NC-Rotary table:: table surface area: Ø 700 / 1.250 x 700 mm max. table load: 650 kg rotatable: C: 360 ° tool magazin:: number of toolpositions: 2x16 pos. tool taper: HSK-A 63 max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool weight: 8,0 kg max. tool length: 315 mm feeds:: feed speeds: max. 30.000 mm/min rapid traverse: 30 m/min total power requirement: 48 kVA weight of the machine ca.: 14,0 t dimensions of the machine ca.: 4,5 x 4,0 x 2,6 m Documents: Chip conveyor: Coolantsystem: elektr. hand wheel: test probe: Heidenhain TS 640 Laser: Blum Operation mode 4: 5 Axis CNC - MachiningCenter Un ...

Suction Feeder, 2 pockets, Delivery

Key data: 4300 mm

older Gebr. Panel saw incl. extraction Technical data ( data according to brochure ) Saw blade diameter 300 mm Cutting depth yes depending on material 70 / 80 mm Cutting length 4300 mm Weight approx. 900 kg Space requirement approx. 6000 x 1500 x Height 2900 mm

Scoring unit: - kW Dimensions (L/W/H): mm machine weight ab.: 900 kg Rear feed width: mm Cutting length: 5300 mm Motor output: 4,6 kW Cutting height: 2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 5300 mm, 2200 mm

Panel Saw Holz-Her Type 1211 Machine No. 579-FD82 Cutting length maximum 5300 mm Cutting height maximum 2200 mm Cutting depth maximum 80 mm Motor power 3/4 kW Saw blade diameter 300 mm Swivelling sawing unit Slatted frame automatically evasive Free-standing installation possible Saw frame can be divided in height for transport Machine dimensions Length 6600 mm x Width 1600 mm x Height 2770 mm

Furniture dollies, furniture dollies with plastic wheels, furniture transport trolleys, transport trolleys, platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, panel trolleys, pipe trolleys, pallet trolleys -Transport trolley: for Euro pallets -Material: Stainless steel (VA) -Length: 1218 mm -Width: 817 mm -Height: 260 mm -Version: 2x swivel casters, 2x fixed casters -Number: 27 transport trolleys available Price: per piece -Weight: 11 kg/piece

Aggregate carrier, clamping plate, traversing table, for modular aggregate system, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG aggregate carrier for milling units -with heavy leadership -movable laterally -with counter -Table height: 285 mm -Table surface: 1210 x 295 mm -Table thickness: 18 mm -Dimensions: 480/1210/H290 mm -Weight: 172 kg

Base for press brake tool, bending tool, die, bottom knife, lower tool, prism tool, reversible prism, 1-piece die block for die bending machine, die tool, folding tool -Support for bending tool: from Promecam STPC 250 40 121 press brake -Length: 4200 mm -Dimensions: see drawing in the photos -Dimensions: 4200/106/H106 mm -Weight: 212 kg

Hydraulic control block for hydraulic pump, hydraulic unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: Promecam, hydraulic control block from press brake Promecam STPC 250 40 121 -Control valve: Abex Denison S16-92489 / 026 20324 / S16-39303 / S26.20456 2-way cartridge valves: Bosch 0 810 060 700 -Individual components: type / number see photos -Dimensions: 875/560/H400 mm -Total weight: 204 kg

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Interroll, belt conveyor type 4081 with pneumatic height adjustment -Lifting height: 500 mm -Speed: 8 m/min -Strap width: 1215 mm -Conveying length: 815 mm, dimensions see technical photo. drawing -Drive: SEW-Eurodrive 0.37 kW, see photo of nameplate -Transport dimensions: 1460/1040/H1360 mm -Weight: 223 kg with pallet

Cantilever rack, heavy duty rack -Manufacturer: Gemac, cantilever rack base field double-sided -Cantilevers: 5 per side -Compartment height: 33 cm -perm. Load: 200 kg per cantilever arm / 1000 kg total. see nameplate -Quantity: 12x shelves available -Price per piece -Dimension: 1315/1210/H2000 mm -Weight: 98 kg/piece

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Vorwerk Rota, solid rubber tires 2 pieces -Tire size: 7.00-15 Rim 5.5-15 532/121-2 -Bolt circle: Ø 220 x 20 mm -Recess: Ø 160 mm -Price/Delivery: complete -Dimensions each: Ø 730 x 180 mm -Weight: 85 kg/piece

Cutting nozzle, welding torch, MIG/MAG torch, hand arc - piercing torch, gouging torch, gouging nozzle, torch nozzles, cutting nozzles, flame cutting system, torch, oxy-fuel cutting system -Manufacturer: Messer, cutting nozzle flame cutting nozzle 6 pieces unused Ovp -Type: Vadura 1215-A -Art.No.: 71615946 -Cutting range: 60-100 mm -Price/Delivery: complete -Transport dimensions: 120/90/H30 mm -Weight: 0.1 kg

Cutting nozzle, welding torch, MIG/MAG torch, hand arc - piercing torch, gouging torch, gouging nozzle, torch nozzles, cutting nozzles, flame cutting system, torch, oxy-fuel cutting system -Manufacturer: Messer, cutting nozzle flame cutting nozzle 5 pieces unused Ovp -Type: Vadura 1215-A -Art.No.: 71615945 -Cutting range: 40-60 mm -Price/Delivery: complete -Transport dimensions: 120/90/H20 mm -Weight: 0.1 kg

Cutting nozzle, welding torch, MIG/MAG torch, hand arc - piercing torch, gouging torch, gouging nozzle, torch nozzles, cutting nozzles, flame cutting system, torch, oxy-fuel cutting system -Manufacturer: Messer, cutting nozzle flame cutting nozzle 40 pieces Ovp -Type: Vadura 1215-A / A-SD 100-150mm / 2-100mm / 2-150mm -Type/Quantity: see photos / parts list -Cutting range: 2-150 mm -Price/Delivery: complete -Transport dimensions: 250/230/H50 mm -Weight: 0.9 kg

Filter system, clean air filter, fine filter, filter, compact filter, particulate filter, filter cassette -Manufacturer: AAF International, air filter type AstroCel ® II -Part No: 12-1210-0205 -Front frame dimensions: 570x1170x110 mm, see photo type plate -Number: 2x air filters available -Price: per piece -Dimensions: 1170/110/H570 mm -Weight: 11 kg/piece

Pad printing machine, screen printing machine, rotary printing machine, pad printer -Manufacturer: Eickmeyer, screen printing machine, pad printing machine -Type: TIC 121 SC -Voltage: 230 V -Table size: 180 x 100 mm -Protrusion: 165 mm -Operation: with foot pedal -Number: 2x pad printing machines available -Price: per piece -Transport dimensions: 670/400/H530 mm -Weight: 50 kg/piece

HOLTEC STIHL ES 121 SHKA Parcel Cross-Cut Saw 2001/2021 With approx. 15m roller conveyor, as good as new! The ES121 F/SHK is the simplest solution for precise end cuts – even from unedged and gap-stacked goods. Cutting with the positionable saw unit They rest parcels to the desired length. This system is also ideal for users with a small footprint. Guide rail swivels hydraulically at a 90° angle around a fixed pivot point Max. cutting accuracy and optimal cutting force distribution with hard chrome-plated pointed tooth chain or carbide-tipped pointed tooth chain from the Home STIHL available HOLTEC guide rail (stellitated on both sides – four-way reversible) ES 121 with roller conveyor and stationary sawing unit – the classic cut for dividing long packages into fixed lengths By means of a movable trolley, the packages are positioned exactly to t ...

MIWE electro 5 herder 1.20m wide 1.60m deep with fixed program control. Clear hearth height 170mm Clear stove height 220mm top stove Stone slab design Total connected load: 65,750KW Extractor hood: no ( accessory ) Fully assembled Mounting height: 2330mm Maintenance was carried out on the furnace annually. Oven stood in a bakery school Width: 1600mm Depth: 2420mm without extractor hood Baking surface: 9.6sqm Steering page on the right Water connection: 1/2"