133,380 used machines on RESALE, but how to find them? Machine Search
offer 22326 Specifications: - Drilling capacity in steel ST 60 35 mm - Drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 170 mm - Projection 345 mm - Rotary table with 2 T-slots 550 mm - distance table – drilling spindle 650 mm - distance base plate – drilling spindle 1000 mm - Feed rates 0.09 - 0.16 - 0.28 mm/rev - AZ transmission continuously variable with manual transmission - Drilling spindle speeds infinitely adjustable 40 - 720 rpm -Right. - Left-hand rotation - Drive 400 V / 2.5 kW -Lighting - Coolant device - Space requirement approx. W 750 x H 1950 x D 1000 mm - Weight approx. 700 kg
Drilling capacity steel/GG: 18/23 mm Spindle mount: 2 MK Projection: 250 mm Table size: 250 x 370 mm Spindle speeds: 400 - 5000 rpm Drive motor: 0.48/0.6 kW Space requirements: 750 x 500 x 1670 mm Weight: 130 kg
Box column drill Alzstar 40S 16 A 380 V Speed 160 - 2250 rpm Length 1 m Width 0.80 m Height 1.80 m Weight 270 kg Work lamp Color: White
- Drilling capacity in St 60, 30 mm - Short spindle MK 3 - Spindle stroke 120 mm - Projection 293 mm - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots - Distance base plate - drill chuck 1000 mm - Feed via turnstile - Weight 220 kg - Spindle speed 160 - 2250 rpm. - Operating voltage 380V-50Hz - Infinitely variable speed adjustment, by means of an adjustment lever - Engine speed in 2 stages, 700/1435 rpm - Tapping device with rotation direction change after reaching the end stops - Coolant device fully installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - Precision machine vice new (test winner)
Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable with countershaft - Level 1: 60 - 210 rpm - Level 2 210 - 765 rpm - Projection 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Table height-adjustable via rack with hand crank - Max. distance table – drilling spindle approx. 780 mm - Max. distance between machined base plate and drilling spindle approx. 1250 mm - Coolant device -Lighting - Drive 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg
Key data: 50 mm, 800 1/min
Speeds infinitely variable from 40 - 800 rpm 4 drill feeds . Clearly good original condition
bore capacity in steel (diameter): 50 mm throat: 385 mm bore stroke: 240 mm table surface area: ø 500 mm spindle taper MT: 5 spindle turning speed range: 40 - 800 U/min feeds: 0,1/0,14/0,2/0,28/0,4 mm/U column diameter: 220 mm distance between table/spindle: max. 670 mm distance spindle/base plate: 1180 mm total power requirement: 4 kW weight of the machine ca.: 1,4 t dimensions of machine L x W x H: 1,5 x 0,75 x 2,4 m Accessories: drill chuck, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Alexanderwerk paddle-mixer grinder, type: MSL 130 L, machine number: 04803037, 400 V, 50 Hz, 30.4 A, 15 kW, plate diameter: 130 mm, total dimensions: 1050 mm x 1000 mm x 1230 mm. Including crate with plates and knives.
bore capacity in steel (diameter): 40 mm throat: mm bore stroke: mm total power requirement: 4 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 60 mm throat: 400 mm bore stroke: mm total power requirement: 4,4 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 325 mm bore stroke: 170 mm table surface area: 730 x 590 mm 0: 130 - 1200 U/min feed: 0,09 - 0,16 - 0,28 mm/U tool taper: MK 4 total power requirement: 1,8 kW weight of the machine ca.: 0,7 t dimensions: 1,2 x 0,8 x 2,15 m Drill with: Feed 2 gears Left/right rotation Foot switch Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): mm throat: 290 mm bore stroke: 180 mm total power requirement: 1,9 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): mm throat: 290 mm bore stroke: 160 mm total power requirement: 1,9 kW weight of the machine ca.: t dimensions of the machine ca.: m Description to follow! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mm throat: 290 mm bore stroke: 180 mm total power requirement: 1,9 kW weight of the machine ca.: t dimensions of the machine ca.: m Description to follow! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
bore capacity in steel (diameter): mm throat: 290 mm bore stroke: 180 mm total power requirement: 1,9 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 345 mm bore stroke: 180 mm spindle turning speed range: 25-640 U/min column diameter: 180 mm table-size: Ø ca. 560 mm surface area: Ø 445 mm feeds: 0,1, 0,2, 0,3 mm/U spindle taper MT: 4 weight of the machine ca.: 1 t dimensions: ca. 650 x 1000 x 2100 mm with thread cutting device foot switch With coolant device in the base steplessly variable speeds, 2 gear stages, and 2 motor speeds The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 345 mm bore stroke: 200 mm table surface area: 720 x 560 mm 0: 60 - 765 U/min feed: 0,15 - 0,2 - 0,3 - 0,36 mm/U tool taper: MK 4 total power requirement: 3,0 kW weight of the machine ca.: 0,4 t Drill with: Feed 2 gears Left/right rotation Foot switch Coolant pump Machine light new quick-release chuck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 35 mm, 280 mm, 180 mm
Column drilling machine ALZMETALL AB 3 ES – Powerful & immediately ready for use For sale is a high-quality column drill from the renowned manufacturer Alzmetall, model AB 3 ES. The machine impresses with its robust design, precise operation and reliable performance. Ideally suited for workshop, metalworking and industrial applications. General information: Machine Type: Column Drilling Machine Manufacturer: Alzmetall Model: AB 3 ES Condition: Used, good general condition, fully functional Shipping time: Immediately available Technical data: Drilling capacity in steel: approx. 35 mm Projection: approx. 280 mm Drilling stroke: approx. 180 mm Recording: MK 3 Speed: Infinitely variable Table size: approx. 600 × 470 mm Equipment: • Drilling depth stop • Drill chuck Machine data: Dimensions (L × W × H): approx. 1200 × 800 × 2100 mm Weight: ...
Heavy Duty Column Drill Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable - Stage 1. 130 - 480 rpm - Stage 2. 480 - 1750 rpm - 3 feeds 0.1; 0,2; 0.3 mm/rev - Projection 290 mm - Max. distance table - drilling spindle 620 mm - Table with 2 T-slots 450 x 450 mm - Height adjustable via rack with hand crank - Separate coolant device - Drive 400 V / 0.9 / 1.3 kW - Space requirement approx. W 660 x H 1900 x D 700 mm - Weight approx. 280 kg
This 3-axis ALESA MONTI MAF45 was manufactured in 1992. It features an impressive X-axis travel of 1,900 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 700 mm. The machine is equipped with a universal head and has a maximum spindle speed of 2,000 rpm. If you are looking to get high-quality machining capabilities, consider the ALESA MONTI MAF45 horizontal machining centre we have for sale. Contact us for further details.
bore capacity in steel St 60: 30 mm bore capacity in cast iron GG 20: 30 mm Drilling capacity in St 60: 30 mm threading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 spindle stroke: 140 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514 x 360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle-table min.: 132 / 724 mm feed: von Hand spindle turning speed - stepless: 225 - 4300 U/min total power requirement: 1,0/1,6 kW weight of the machine ca.: 260 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 25511 Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Tapping device - Drilling spindle holder MK 3 long spindle - Drilling spindle stroke 180 mm - 10 drilling spindle speeds 250 - 2100 rpm - Projection approx. 290 mm - Max. distance table – drilling spindle approx. 620 mm - Table with 2 T-slots height-adjustable 520 x 450 mm - Drive 400 V / 1.0 / 1.3 kW - Space requirement approx. W 600 x H 1850 x D 700 mm - Weight approx. 280 kg
Key data: 28 mm, 285 mm
Drilling capacity in steel: approx. 28mm Projection approx. 285mm Drilling depth approx. 125mm Spindle mount MK3 Infinitely variable speeds from 130-1150 rpm 3 automatic feeds 0.1 - 0.2 - 0.3mm/rev Table clamping area approx. 500 x 370mm Table adjustable in height via rack Machining base plate approx. 350 x 320mm With motor 1.5kW, 1415 rpm, 380/220V Weight: approx. 380kg Condition and details see pictures
Alzmetall AB 3 ES - Column Drilling Machine -Drilling capacity / steel 35mm -Projection 280mm -Drilling stroke 180mm Hebkn Auevtzrvj S Tol -Recording MK 3 -Table size 600x470mm -Stepless speed regulation -Drilling depth stop -Drill chuck -Documentation Dimensions: LxWxH1.2x0.8x2.1 meters / Weight 550 kg
General Manufacturer: Alzmetall Type: AC 32/AS Year of Make: 1991 Performance Drilling capacity St 60: D32 mm, v=20 m/min, s=0.27 mm/rev Drilling capacity GG 20: D40 mm, v=20 m/min, s=0.27 mm/rev Drilling capacity St 60: D45 mm, v=20 m/min, s=0.15 mm/rev Tapping capacity St 60: M 24 Threading capacity GG 20: M 30 Drive Main drive: 3 kW – 1,500 rpm Main spindle speed range: 55 – 5,000 rpm Feed Feed drive: automatic, infinitely variable Feed speed: 1 – 3,000 mm/min Rapid traverse: 3 m/min Spindle Tool holder: MK4 Spindle head diameter: 46 mm Quill stroke: 180 mm Projection: 322 mm Column diameter: 145 mm Table Table clamping area: 415 mm x 508 mm Number of T-slots x width x spacing: 5 x 14 x 100 Table stroke: 663 mm Distance from spindle table max: 663 mm Spindle-machined base plate distance: 1,083 mm Dimensions and weight Dimensions: 720 mm ...
Drilling Ø: 28/35 mm Spindle holder: MK 3 Projection: 293 mm Table size: 300 x 440 x 500 mm Table swivel on round column and height-adjustable via hand crank and rack Large distance between table and drill quill: 630 mm Quill stroke: 180 mm Spindle speeds adjustable in 4 groups: 65 - 1750 rpm Drive motor: 380 V, 0.9/1.3 kW Weight: 340 kg Space requirement: 1100 x 900 x 1880 mm
Drilling Ø in steel/GG 20: 40/55 mm Spindle holder: MK 4 Projection: 345 mm Table size: 450 x 600 mm Distance between table and drill quill: 785 mm Quill stroke: 180 mm Spindle speeds in 4 groups by pole-switching. Engine and manual transmission as well as infinitely variable control: 160 - 1540 rpm 4 automatic feeds: 0.09; 0,12; 0.18 and 0.22 mm/rev Drive motor: 380 V, 2.6/3.2 kW Weight: 640 kg Space requirement: 700 x 1150 x 2000 mm
used
Drilling Ø: 28/35 mm Spindle holder: MK 3 Projection: 293 mm Table size: 400 x 400 mm Table swivel on round column and height-adjustable via hand crank and rack Large distance between table and drill quill: 630 mm Quill stroke: 180 mm Spindle speeds in 4 groups adjustable: 65 - 1750 rpm Drive motor: 380 V, 0.9/1.5 kW Weight: 340 kg Space requirement: 600 x 920 x 1880 mm
Tool holder MK 4 Drilling capacity up to 40 mm steel Clockwise and counterclockwise rotation Stepless speed adjustment with display Automatic feed
: 40 mm : M 24 : M 30 spindle turning speed - stepless: 160-2250 U/min : MK 3 spindle stroke: 120 mm throat: 293 mm column diameter: 115 mm : 515x360 mm distance spindle /table: min./max. 117/701 mm : 2 x 14 x 224 mm feed: 0,1 + 0,2 mm/U Machine height: 1840 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drilling Ø: 28/35 mm Spindle holder: MK 3 Projection: 293 mm Table size: 400 x 400 mm Table swivel on round column and height-adjustable via hand crank and rack Large distance between table and drill quill: 630 mm Quill stroke: 180 mm Spindle speeds in 4 groups adjustable: 65 - 1750 rpm Drive motor: 380 V, 0.9/1.5 kW Weight: 340 kg Space requirement: 600 x 920 x 1880 mm
Alzmetall AC 32 Turret Double Head In-Line Drilling Machine Extremely robust and rare double-head in-line drilling machine based on two Alzmetall AC 32 drill tops. This system is a high-quality industrial design designed for highly efficient series or step machining. Instead of simple spindles, this machine is equipped with two separate tool turrets. This enables fully automatic machining cycles (e.g. centering, drilling, countersinking, threading) without the need to manually retool tools. Technical data & equipment (per capita / total system): Manufacturer of drill tops: Alzmetall (Germany) Model: AC 32 (electronically controlled with digital display) Drilling capacity: max. 32 mm in steel Threading capacity: max. M 24 / M 30 Tool changer: 2x swivelling turret heads with several stations Machine table: Solid, ground cast iron table with T-slots for flexible constru ...
Key data: 40 mm, 80 1/min
Column Drill Alzmetall AB 3 / ESV Drive type: AZ continuously variable transmission with two-stage manual transmission Speed range (Gear Stage I): 80-240 rpm or 160-480 rpm Speed range (Gear Stage II): 240–700 rpm or 480–1,400 rpm Automatic feed: 3 stages (0.1 – 0.2 – 0.3 mm/rev) Motor power 1.5 KW - 380 Volt Tool holder: Short spindle MK 3 Spindle stroke (drilling stroke): 160 mm Projection: 285 mm Table clamping surface: 500 x 370 mm Column diameter: 130 mm Machine weight approx. 400 kg Drilling capacity in steel (St 60): 28 mm Drilling capacity in cast iron (GG 20): 35 mm Drilling capacity in steel (St 60): 40 mm Tapping in steel (St 60): Up to max. M 22 Threading in cast iron (GG 20): Up to max. M 33 Retrofitted foot switch and control cabinet Mechanical-hydraulic machine vice Röhm RB 4 (Jaw width 160 mm - clamping range up to 310 mm) Retrofitted f ...
bore capacity in steel (diameter): 45 mm throat: 350 mm bore stroke: 180 mm : 4 speeds: 30 - 765 U/min table-size: 720 x 560 mm total power requirement: 3,4 kW weight: 950 kg dimensions: 1200 x 800 x 2300 mm Features: - Automatic feed - Coolant system - Infinitely variable speed control - Adjustable fixed depth stop - Emergency stop foot switch - Drill chuck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40.0 mm throat: 293 mm bore stroke: 120 mm morse taper: 3 MK table:: 515 x 360 mm turning speeds: 160 - 2250 U/min column diameter: 115 mm thread: M 24 ST60 thread: M 30 GG20 feed: 0.10 + 0.20 mm/U distance spindle /table: 117 / 701 mm engine output: 1.0 / 1.6 kW weight: 270 kg Machine height: 1840 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT ...
bore capacity in steel (diameter): 35.0 / 40.0 mm throat: 300 mm bore stroke: 180 mm turning speeds: 110 - 1450 U/min table-size: Ø 455 mm column diameter: 155 mm feed: 0.1 / 0.2 / 0.3 m/min spindle taper MT: 4 MK engine output: 1.5 kW weight: 450 kg range L-W-H: 800 x 650 x 1850 mm Features: - Heavy-duty column drill press (V-belt drive) - Automatic spindle feed - Infinitely variable speed control - Fixed depth stop - Round machine table with T-slots Height-adjustable via hand crank Rotatable - Emergency stop button on the front - Coolant system with separate reservoir - Operatorâs manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 40-1080 tool taper: MK 5 weight of the machine ca.: 2 t feed: . Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: ja feed: 80 - 800 m/min : 1848 weight of the machine ca.: 2,2 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 300 mm bore stroke: 180 mm turning speeds: 55-1450 U/min Feed: 0,1-0,3 mm/U keyless drill chuck: machine.: Nummer 5112 table surface area: 620x470 mm spindle taper metric: 4 thread cutting attachment: The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoT ...
ALZMETALL AB 35S Column Drilling Machine -Drilling capacity steel: 40 mm -Casting drilling capacity: 45 mm - Spindle holder: MK4 -Projection: 300 mm -Quill stroke (drilling stroke): 175 mm -Spindle speed: 65–1,450 rpm (infinitely variable, 2 gear stages) -Automatic feed: 0.10 / 0.20 / 0.30 mm/rev -Table clamping surface: 600x460mm -Table adjustment: 600 mm -Table height-adjustable via hand crank -T-slot clamping table -Column diameter: 180 mm -Distance from spindle center to base plate: 1,165 mm -Base plate: 360 × 360 mm -Motor power: 3.5 kW -Operating voltage: 400 V -Continuously variable variable transmission -Automatic quill feed -Coolant device -Machine lighting -Speed display Dimensions: LxWxH 1.2x0.6x2.1 meters / Weight 1200Kg
ALZMETALL column drilling machine AB 3 ES -Well-maintained original condition -Drilling capacity / steel max. 35mm -Projection approx. 280mm -Table size approx. 600x470mm -Drilling stroke approx. 180mm -Cone mount MK 3 -Stepless speed regulation -Speed range 65 - 1750 rpm -Drilling depth stop -Spindle protection device -Not /Off -Footswitch -Analogue speed display -Drill chuck -Documentation Dimensions: LxWxH 1.2x0.8x2 meters / Weight approx. 500Kg
ALZMETALL AB 35S Column Drilling Machine -Drilling capacity steel: 40 mm -Casting drilling capacity: 45 mm - Spindle holder: MK4 -Projection: 300 mm -Quill stroke (drilling stroke): 175 mm -Spindle speed: 65–1,450 rpm (infinitely variable, 2 gear stages) -Automatic feed: 0.10 / 0.20 / 0.30 mm/rev -Table clamping surface: 600x460mm -Table adjustment: 600 mm -Table height-adjustable via hand crank -T-slot clamping table -Column diameter: 180 mm -Distance from spindle center to base plate: 1,165 mm -Base plate: 360 × 360 mm -Motor power: 3.5 kW -Operating voltage: 400 V -Continuously variable variable transmission -Automatic quill feed -Coolant device -Machine lighting -Speed display Dimensions: LxWxH 1.2x0.6x2.1 meters / Weight 1200Kg
bore capacity in steel (diameter): 55.0 mm throat: 300 mm bore stroke: 140 mm morse taper: 4 MK table:: 615 x 430 mm turning speeds: 70 - 1200 U/min column diameter: 145 mm thread: M 30 ST60 thread: M 36 GG20 feed: 0.10 + 0.30 mm/U distance spindle /table: 150 / 735 mm engine output: 1.8 / 2.9 kW weight: 380 kg Machine height: 1850 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - ...
bore capacity in steel (diameter): 40.0 mm throat: 293 mm bore stroke: 120 mm morse taper: 3 MK table:: 515 x 360 mm turning speeds: 80 - 1125 U/min column diameter: 115 mm thread: M 24 ST60 thread: M 30 GG20 feed: 0.10 + 0.20 mm/U distance spindle /table: 117 / 701 mm engine output: 1.0 / 1.6 kW weight: 270 kg Machine height: 1840 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - ...
bore capacity in steel (diameter): 65 mm throat: 390 mm bore stroke: 250 mm spindle taper MT: 5 table-size: 880x670 mm spindle turning speed - stepless: 40-800 U/min weight of the machine ca.: 1.2 t www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 34 mm : 40 mm : 40 mm : MK 4 : 100-1.800 U/min. throat: 300 mm : 615x430 mm : 2 x 14 x 224 mm : 138/688 mm column diameter: 145 mm spindle stroke: 160 mm feeds: 0,1-0,2-0,3-0,4 mm/U Machine height: 1865 mm total power requirement: 1,4/2,2 kW Standard equipment: - Electromagnetic feed clutch with overload protection and electrical Cross Handle Switches - Main switch lockable - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel - Speed adjustment stepless - Speed display digital - Protection class IP 54 - Motor insulation class F - Spindle protection with electrical protection Pos. 20.1 Tapping device with foot switch, for thread cutting with Stop, max. 6 threads/min., (Tapping power dependent on spindle speed) Pos. 25. Coolant device B, consisting of: separate container (33 l), pump with Motor protection switch, complete fitting The data for ...
: 23 mm threading in St 60: M14 threading in GG 20: M16 : MK 2 spindle stroke: 100 mm : 225-4.300 U/min. throat: 250 mm column diameter: 90 mm : 370x300 mm : 2x14x160 mm distance spindle /table: min./max. 140/670 mm : Handkurbel feed: von Hand weight of the machine ca.: 180 kg Standard equipment: 7 TFT LCD display with touch function: Manual input of spindle speed setpoint, speed display actual value, integrated drilling depth display with touch function. setpoint, actual speed display, integrated drilling depth display with touch zero point transfer, virtual drilling depth scale in the display, machine status status indicators and warnings on the display, Service information, Selectable operator language operator language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 12 threads/min (thread cutting capacity depends on spindle speed), thread depth adjus ...
bore capacity in steel (diameter): 40 mm throat: 345 mm bore stroke: 220 mm tool adaptor: MK 4 machine weight ab.: 400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 34 mm : 40 mm : 40 mm threading in St 60: M 24 threading in GG 20: M 30 : MK 4 : 100-1.800 U/min. throat: 300 mm : 615x430 mm : 2 x 14 x 224 mm : 138/688 mm column diameter: 145 mm spindle stroke: 160 mm feeds: 0,1-0,2-0,3-0,4 mm/U total power requirement: 1,4/2,2 kW Machine height: 1865 mm Standard equipment: 7 TFT LCD display with touch function: manual input of spindle speed Setpoint, actual speed display, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU - Thread cutting device, for thread cutting with stop, max. 6th Thread / min (thread cutting performance dependent on spindle speed), thread depth adjustable via depth stop and in the TFT - LCD display (4 tools) - Infinitely variable speed s ...
bore capacity in steel St 60: 25 mm Drilling capacity in St 60: 30 mm threading in St 60: M 16 : M 20 Short spindle: MK 3 spindle stroke: 140 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514x360 mm T-Slots Amount - Width - Distance: 2x14x224 mm distance spindle - column min./max.: 132/724 mm feed: von Hand 0: stufenlos Spindle Speed: 225-4300 U/min. engine: 1,0/1,6 kW voltage: 400 V Standard equipment: - 7 TFT LCD display with touch function: Manual input of spindle speed set value Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status indicators and warnings on the display Service information Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6 threads/min (thread cutting capacity depending on spi ...
maximum number of results exceeded
please refine your search
3.000 € 
